The OPA830 is a low-power, single-supply, wideband, voltage-feedback amplifier designed to operate on a single 3V or 5V supply. The device also supports operation on ±5V or +10V supplies. The input range extends below the negative supply and to within 1.7V of the positive supply. Using complementary common-emitter outputs provides an output swing to within 25mV of either supply while driving 150Ω. High output drive current (±80mA) and low differential gain and phase errors also make this device an excellent choice for single-supply consumer video products.
Low distortion operation is provided by the high gain bandwidth product (110MHz) and slew rate (550V/µs), making the OPA830 an excellent input buffer stage to 3V and 5V CMOS ADCs. Unlike other low-power, single-supply amplifiers, distortion performance improves as the signal swing decreases. A low 9.2nV/√Hz input voltage noise supports wide dynamic range operation.
The OPA830 is available in an industry-standard SO-8 package, and in an ultra-small SOT23-5 package. For fixed-gain line driver applications, consider the OPA832.
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 날짜 |
|---|---|---|---|---|
| * | Data sheet | OPA830 Low-Power, Single-Supply, Wideband Operational Amplifier datasheet (Rev. H) | PDF | HTML | 2024/12/10 |
| E-book | The Signal e-book: A compendium of blog posts on op amp design topics | 2017/03/28 | ||
| Application note | RLC Filter Design for ADC Interface Applications (Rev. A) | 2015/05/13 | ||
| Application note | Wideband Complementary Current Output DAC Single-Ended Interface (Rev. A) | 2015/05/08 | ||
| Application note | Noise Analysis for High Speed Op Amps (Rev. A) | 2005/01/17 | ||
| Application note | ADS5500, OPA695: PC Board Layout for Low Distortion High-Speed ADC Drivers | 2004/04/22 | ||
| Application note | Measuring Board Parasitics in High-Speed Analog Design | 2003/07/07 |
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
DEM-OPA-SOT-1A는 고속 광대역 연산 증폭기의 작동 및 성능을 평가하는 데모 보드입니다. 채워지지 않은 이 PC 보드는 소형 아웃라인 트랜지스터(SOT) DBV 패키지로 제공되는 제품과 호환됩니다.
The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOIC (D) | 8 | Ultra Librarian |
| SOT-23 (DBV) | 5 | Ultra Librarian |
Analog Engineer's Calc Installer
General calculator tool for analog design support.