PCA9306H
- 2-Bit bidirectional translator for SDA and SCL lines in mixed-mode I2C Applications
- I2C and SMBus compatible
- Less than 1.5ns maximum propagation delay to accommodate standard-mode and fast-mode I2C devices and multiple controllers
- Negative glitch immunity on the I2C lines when EN = 0V
- Allows voltage-level translation between
- 1.2V VREF1 and 1.8V, 2.5V, 3.3V, or 5V VREF2
- 1.8V VREF1 and 2.5V, 3.3V, or 5V VREF2
- 2.5V VREF1 and 3.3V or 5V VREF2
- 3.3V VREF1 and 5V VREF2
- Provides bidirectional voltage translation with no direction pin
- Low 3.5Ω ON-state resistance between input and output ports provides less signal distortion
- Open-drain I2C I/O ports (SCL1, SDA1, SCL2, and SDA2)
- 5V Tolerant I2C I/O ports to support mixed-mode signal operation
- High-impedance SCL1, SDA1, SCL2, and SDA2 pins for EN = low
- Lockup-free operation for isolation when EN = low
- Flow-through pinout for ease of printed-circuit-board trace routing
- Latch-up performance exceeds 100mA Per JESD 78, class II
- ESD protection exceeds JESD 22
- 2000V Human-body model (A114-A)
- 1000V Charged-device model (C101)
The PCA9306H device is a dual bidirectional I2C and SMBus voltage-level translator with an enable (EN) input, and is operational from 1.2V to 3.3V VREF1 and 1.8V to 5.5V VREF2.
The PCA9306H device allows bidirectional voltage translations between 1.2V and 5V, without the use of a direction pin. The low ON-state resistance (RON) of the switch allows connections to be made with minimal propagation delay. When EN is high, the translator switch is ON, and the SCL1 and SDA1 I/O are connected to the SCL2 and SDA2 I/O, respectively, allowing bidirectional data flow between ports. When EN is low, the translator switch is off, and a high-impedance state exists between ports.
In addition to voltage translation, the PCA9306H device can be used to separate a 400kHz bus from a 100kHz bus by controlling the EN pin to disconnect the slower bus during fast-mode communication.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 날짜 |
|---|---|---|---|---|
| * | Data sheet | PCA9306H Dual Bidirectional I2 C Bus and SMBus Voltage-Level Translator datasheet | PDF | HTML | 2026/05/04 |
| Selection guide | Logic Guide (Rev. AC) | PDF | HTML | 2025/11/13 | |
| Application note | Understanding and Interpreting Standard-Logic Data Sheets (Rev. C) | 2015/12/02 | ||
| Application note | Programming Fun Lights With TI's TCA6507 | 2007/11/30 | ||
| Application note | Semiconductor Packing Material Electrostatic Discharge (ESD) Protection | 2004/07/08 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
5-8-NL-LOGIC-EVM — 5-8핀 DPW, DQE, DRY, DSF, DTM, DTQ 및 DTT 패키지를 지원하는 일반 로직 및 변환 EVM
DTT, DRY, DPW, DTM, DQE, DQM, DSF 또는 DTQ 패키지가 있는 로직 또는 변환 디바이스를 지원하도록 설계된 일반 EVM. 보드 설계는 유연한 평가가 가능합니다.
PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 착수하기 (...)
TINA-TI — SPICE 기반 아날로그 시뮬레이션 프로그램
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| X2SON (DQE) | 8 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.