홈 인터페이스 RS-485 및 RS-422 트랜시버
홈
인터페이스
RS-485 및 RS-422 트랜시버

SN65LBC174A-EP

활성

EP(Enhanced Product) 쿼드 RS-485/RS-422 차동 라인 드라이버

지금 주문하기
데이터 시트

SN65LBC174A-EP

활성
데이터 시트 지금 주문하기

제품 상세 정보

Number of receivers 0 Number of transmitters 4 Signaling rate (max) (Mbps) 30 Fault protection (V) -10 to 15 Common-mode range (V) -7 to 12 Number of nodes 32 Isolated No Supply current (max) (µA) 23000 Rating HiRel Enhanced Product Operating temperature range (°C) -55 to 125
Number of receivers 0 Number of transmitters 4 Signaling rate (max) (Mbps) 30 Fault protection (V) -10 to 15 Common-mode range (V) -7 to 12 Number of nodes 32 Isolated No Supply current (max) (µA) 23000 Rating HiRel Enhanced Product Operating temperature range (°C) -55 to 125
SOIC (DW) 16 106.09 mm² (10.3 mm × 10.3 mm) SOIC (DW) 20 131.84 mm² (12.8 mm × 10.3 mm)
  • VID V62/07611
  • Designed for TIA/EIA-485, TIA/EIA-422, and ISO 8482 applications
  • Signaling rates up to 30 Mbps (1)
  • Propagation delay times < 11 ns
  • Low standby power consumption 1.5-mA max
  • Driver positive- and negative-current limiting
  • Power-up and power-down glitch free for line-insertion applications
  • Thermal shutdown protection
  • Industry standard pinout, compatible with SN75174, MC3487, DS96174, LTC487, and MAX3042
  • Supports defense, aerospace, and medical applications
    • Controlled baseline
    • One assembly and test site
    • One fabrication site
    • Available in military (–55°C to 125°C) temperature range
    • Extended product life cycle
    • Extended product-change notification
    • Product traceability

(1)The signaling rate of a line is the number of voltage transitions that are made per second, expressed in the unit bits per second (bps).
  • VID V62/07611
  • Designed for TIA/EIA-485, TIA/EIA-422, and ISO 8482 applications
  • Signaling rates up to 30 Mbps (1)
  • Propagation delay times < 11 ns
  • Low standby power consumption 1.5-mA max
  • Driver positive- and negative-current limiting
  • Power-up and power-down glitch free for line-insertion applications
  • Thermal shutdown protection
  • Industry standard pinout, compatible with SN75174, MC3487, DS96174, LTC487, and MAX3042
  • Supports defense, aerospace, and medical applications
    • Controlled baseline
    • One assembly and test site
    • One fabrication site
    • Available in military (–55°C to 125°C) temperature range
    • Extended product life cycle
    • Extended product-change notification
    • Product traceability

(1)The signaling rate of a line is the number of voltage transitions that are made per second, expressed in the unit bits per second (bps).

The SN65LBC174A-EP is a quadruple differential line driver with tri-state outputs, designed for TIA/EIA-485 (RS-485), TIA/EIA-422 (RS-422), and ISO 8482 applications.

This device is optimized for balanced multipoint bus transmission at signaling rates up to 30-million bits per second (Mbps). The transmission media may be printed-circuit-board traces, backplanes, or cables. The ultimate rate and distance of data transfer is dependent upon the attenuation characteristics of the media and the noise coupling to the environment.

Each driver features current limiting and thermal-shutdown circuitry, making it suitable for high-speed multipoint applications in noisy environments. The device is designed using LinBiCMOS™ technology, facilitating low power consumption and robustness.

The two enable (EN) inputs provide pair-wise driver enabling, or can be externally tied together to provide enable control of all four drivers with one signal. When disabled or powered off, the driver outputs present a high impedance to the bus for reduced system loading.

The SN65LBC174A-EP is characterized for operation over the temperature range of –55°C to 125°C.

The SN65LBC174A-EP is a quadruple differential line driver with tri-state outputs, designed for TIA/EIA-485 (RS-485), TIA/EIA-422 (RS-422), and ISO 8482 applications.

This device is optimized for balanced multipoint bus transmission at signaling rates up to 30-million bits per second (Mbps). The transmission media may be printed-circuit-board traces, backplanes, or cables. The ultimate rate and distance of data transfer is dependent upon the attenuation characteristics of the media and the noise coupling to the environment.

Each driver features current limiting and thermal-shutdown circuitry, making it suitable for high-speed multipoint applications in noisy environments. The device is designed using LinBiCMOS™ technology, facilitating low power consumption and robustness.

The two enable (EN) inputs provide pair-wise driver enabling, or can be externally tied together to provide enable control of all four drivers with one signal. When disabled or powered off, the driver outputs present a high impedance to the bus for reduced system loading.

The SN65LBC174A-EP is characterized for operation over the temperature range of –55°C to 125°C.
filter 기타 RS-485 및 RS-422 트랜시버 찾기
다운로드 스크립트와 함께 비디오 보기 비디오

관심 가지실만한 유사 제품

open-in-new 대안 비교
비교 대상 장치와 유사한 기능.
SN75174 활성 쿼드러플 차동 라인 드라이버 Catalog version

기술 자료

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
2개 모두 보기
상위 문서 유형 직함 형식 옵션 최신 영어 버전 다운로드 날짜
* 데이터 시트 SN65LBC174A-EP Quadruple RS-485 Differential Line Driver datasheet (Rev. A) PDF | HTML 2019. 11. 18
* VID SN65LBC174A-EP VID V6207611 2016. 6. 21

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

패키지 핀 CAD 기호, 풋프린트 및 3D 모델
SOIC (DW) 16 Ultra Librarian
SOIC (DW) 20 Ultra Librarian
TI의 평가 항목에 대한 표준 약관이 적용됩니다.

주문 및 품질

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

포럼 주제 모두 보기(영문)

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상