SRC4392
- Two-Channel Asynchronous Sample Rate Converter (SRC)
- Dynamic Range with –60dB Input (A-Weighted): 144dB typical
- Total Harmonic Distortion and Noise (THD+N) with Full-Scale Input: –140dB typical
- Supports Audio Input and Output Data Word Lengths Up to 24 Bits
- Supports Input and Output Sampling Frequencies Up to 216kHz
- Automatic Detection of the Input-to-Output Sampling Ratio
- Wide Input-to-Output Conversion Range:
16:1 to 1:16 Continuous - Excellent Jitter Attenuation Characteristics
- Digital De-Emphasis Filtering for 32kHz, 44.1kHz, and 48kHz Input Sampling Rates
- Digital Output Attenuation and Mute Functions
- Output Word Length Reduction
- Status Registers and Interrupt Generation for Sampling Ratio and Ready Flags
- Digital Audio Interface Transmitter (DIT)
- Supports Sampling Rates Up to 216kHz
- Includes Differential Line Driver and
CMOS Buffered Outputs - Block-Sized Data Buffers for Both Channel Status and User Data
- Status Registers and Interrupt Generation for Flag and Error Conditions
- User-Selectable Serial Host Interface: SPI or Philips I2C™
- Provides Access to On-Chip Registers and Data Buffers
U.S. Patent No. 7,262,716
- Digital Audio Interface Receiver (DIR)
- PLL Lock Range Includes Sampling Rates from 20kHz to 216kHz
- Includes Four Differential Input Line Receivers and an Input Multiplexer
- Bypass Multiplexer Routes Line Receiver Outputs to Line Driver and Buffer Outputs
- Block-Sized Data Buffers for Both Channel Status and User Data
- Automatic Detection of Non-PCM Audio Streams (DTS CD/LD and IEC 61937 formats)
- Audio CD Q-Channel Sub-Code Decoding and Data Buffer
- Status Registers and Interrupt Generation for Flag and Error Conditions
- Low Jitter Recovered Clock Output
- Two Audio Serial Ports (Ports A and B)
- Synchronous Serial Interface to External Signal Processors, Data Converters, and Logic
- Slave or Master Mode Operation with Sampling Rates up to 216kHz
- Supports Left-Justified, Right-Justified, and Philips I2S™ Data Formats
- Supports Audio Data Word Lengths Up to
24 Bits
- Four General-Purpose Digital Outputs
- Multifunction Programmable Via Control Registers
- Extensive Power-Down Support
- Functional Blocks May Be Disabled Individually When Not In Use
- Operates From +1.8V Core and +3.3V I/O Power Supplies
- Packages:
- QFN-40
- Small TQFP-48 Package, Compatible with the SRC4382 and DIX4192
The SRC4392 is a highly-integrated CMOS device designed for use in professional and broadcast digital audio systems. The SRC4392 combines a high-performance, two-channel, asynchronous sample rate converter (SRC) with a digital audio interface receiver (DIR) and transmitter (DIT), two audio serial ports, and flexible distribution logic for interconnection of the function block data and clocks.
The DIR and DIT are compatible with the AES3, S/PDIF, IEC 60958, and EIAJ CP-1201 interface standards. The audio serial ports, DIT, and SRC may be operated at sampling rates up to 216kHz. The DIR lock range includes sampling rates from 20kHz to 216kHz.
The SRC4392 is configured using on-chip control registers and data buffers, which are accessed through either a 4-wire serial peripheral interface (SPI) port, or a 2-wire Philips I2C bus interface. Status registers provide access to a variety of flag and error bits, which are derived from the various function blocks. An open drain interrupt output pin is provided, and is supported by flexible interrupt reporting and mask options via control register settings. A master reset input pin is provided for initialization by a host processor or supervisory functions.
The SRC4392 requires a +1.8V core logic supply, in addition to a +3.3V supply for powering portions of the DIR, DIT, and line driver and receiver functions. A separate logic I/O supply supports operation from +1.65V to +3.6V, providing compatibility with low voltage logic interfaces typically found on digital signal processors and programmable logic devices. The SRC4392 is available in a QFN-40 and a lead-free, TQFP-48 package. The TQFN-48 is pin- and register-compatible with the Texas Instruments SRC4382 and DIX4192 products.
기술 자료
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | Two-Channel, Asynchronous Sample Rate Converter with Integrated Digital Audio . datasheet (Rev. D) | 2012/12/18 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
PP-SALB2-EVM — PP-SALB2-EVM 스마트 증폭기 스피커 특성화 보드 평가 모듈(학습 보드 2)
이 보드는 다음을 지원합니다. TAS2555YZEVM, TAS2557EVM 및 TAS2559EVM.
스마트 증폭기 스피커 특성화 보드는 지원되는 TI 스마트 증폭기 및 PurePath 콘솔 소프트웨어와 함께 사용될 경우 사용자가 TI 스마트 증폭기 제품과 함께 사용할 스피커 진동 편위, 온도 및 기타 매개 변수를 측정할 수 있는 기능을 제공합니다. 전체 솔루션은 사용하기 쉬운 단계별 프로세스를 제공하여 전체 스피커 특성화 프로세스를 안내합니다. 특성화가 완료되면 스피커 매개 변수가 PurePath 콘솔에 자동으로 로드되므로 (...)
SRC4392EVM-PDK — SRC4392 평가 모듈(EVM) 및 USB 마더보드
SRC4392EVM-PDK는 텍사스 인스트루먼트의 SRC4392 장치의 기능과 성능을 평가하기 위한 모듈식 솔루션을 제공합니다. 이 PDK에는 마더보드(DAIMB)와 도터보드(SRC4392EVM)가 포함되어 있습니다. 이러한 보드는 서로 연결되어 데스크톱 컴퓨터를 사용하여 SRC4392 장치를 분석할 수 있는 완벽한 솔루션을 제공합니다. 모듈식 설계를 통해 일반적인 기능을 DAIMB 마더보드에 통합할 수 있으며, 장치별 기능은 도터보드 EVM에 통합됩니다.
TAS3251EVM — TAS3251 175W 스테레오/350W 모노 울트라 HD 디지털 입력 클래스 D 평가 모듈
TAS3251 Ultra-HD 오디오 평가 모듈은 텍사스 인스트루먼트의 TAS3251 통합 회로를 보여줍니다. TAS3251은 클래스 D 효율성을 통해 진정한 프리미엄 음질을 구현하는 디지털 입력, 고성능 클래스 D 오디오 증폭기입니다. 디지털 프론트 엔드에는 SmartAmp 및 SmartEQ를 포함한 고급 오디오 처리를 위한 DSP가 통합된 고성능 Burr-Brown™ DAC가 탑재되어 있습니다. 이 단일 칩 솔루션의 통합으로 전체 시스템 솔루션 크기와 비용을 절감할 수 있습니다. DSP는 빠르고 쉬운 스피커 튜닝 및 제어를 (...)
PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 착수하기 (...)
TIDA-00874 — 디지털 입력 및 신호 처리 기능을 갖춘 하이파이 175W 클래스 D 오디오 증폭기 레퍼런스 디자인
TIDA-00403 — TLV320AIC3268 miniDSP 코덱을 사용한 초음파 거리 측정 레퍼런스 디자인
TIDA-00385 — 휴대형 및 스마트폰 애플리케이션을 위한 하이파이 오디오 헤드폰 재생 레퍼런스 디자인
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| TQFP (PFB) | 48 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.