인터페이스 I2C, I3C 및 SPI IC I2C 및 I3C 레벨 시프터, 버퍼 및 허브

TCA9801

활성

내부 1mA 전류 소스를 지원하는 2비트 레벨 변환 400kHz I2C/SMBus 버퍼/리피터

제품 상세 정보

Features Buffer, Enable pin Protocols I2C Frequency (max) (MHz) 0.4 VCCA (min) (V) 0.8 VCCA (max) (V) 3.6 VCCB (min) (V) 1.65 VCCB (max) (V) 3.6 Supply restrictions No rule Rating Catalog Operating temperature range (°C) -40 to 125
Features Buffer, Enable pin Protocols I2C Frequency (max) (MHz) 0.4 VCCA (min) (V) 0.8 VCCA (max) (V) 3.6 VCCB (min) (V) 1.65 VCCB (max) (V) 3.6 Supply restrictions No rule Rating Catalog Operating temperature range (°C) -40 to 125
VSSOP (DGK) 8 14.7 mm² (3 mm × 4.9 mm)
  • Two-channel bidirectional buffer
  • Integrated current source on B-side, requires no external B-side resistors
  • Ultra-low power consumption
  • No static-voltage offset, low VOL
  • I2C bus and SMBus compatible
  • Operating supply voltage range of 0.8 V to 3.6 V on A-side
  • Operating supply voltage range of 1.65 V to 3.6 V on B-side
  • Active-high repeater enable input
  • Powered-off high impedance I2C bus pins on A-side
  • Powered-off back-power protection I2C bus pins
  • Support for clock stretching and multiple master arbitration
  • Family of current source options from 0.5 mA to 3 mA
  • Two-channel bidirectional buffer
  • Integrated current source on B-side, requires no external B-side resistors
  • Ultra-low power consumption
  • No static-voltage offset, low VOL
  • I2C bus and SMBus compatible
  • Operating supply voltage range of 0.8 V to 3.6 V on A-side
  • Operating supply voltage range of 1.65 V to 3.6 V on B-side
  • Active-high repeater enable input
  • Powered-off high impedance I2C bus pins on A-side
  • Powered-off back-power protection I2C bus pins
  • Support for clock stretching and multiple master arbitration
  • Family of current source options from 0.5 mA to 3 mA

The TCA9801 is a dual-channel bidirectional buffer intended for I2C bus and SMBus/PMBus systems. It provides bidirectional level shifting (up-translation and down-translation) between low voltages (down to 0.8 V) and higher voltages (1.65 V to 3.6 V). The TCA9801 features an internal current source on the B-side of the device, allowing the removal of external pull-up resistors on the B-side. The current source also provides an improved rise time and ultra-low power consumption.

The TCA9801 is able to provide true buffering (rather than a pass-FET solution) without using a static voltage offset or incremental offset. This means that the VOL on both the A and B sides of the TCA9801 are very low (approximately 0.2 V), helping to eliminate communication issues as a result of fixed VIL thresholds. Another key feature of the TCA9801 is that there are no power sequencing requirements, or power supply dependencies. VCCA can be greater than, less than, or equal to VCCB. This gives the system designer flexibility with how the TCA9801 is used.

The TCA9801 is part of a four device family with varying current source strengths (see the Device Comparison Table).

The TCA9801 is a dual-channel bidirectional buffer intended for I2C bus and SMBus/PMBus systems. It provides bidirectional level shifting (up-translation and down-translation) between low voltages (down to 0.8 V) and higher voltages (1.65 V to 3.6 V). The TCA9801 features an internal current source on the B-side of the device, allowing the removal of external pull-up resistors on the B-side. The current source also provides an improved rise time and ultra-low power consumption.

The TCA9801 is able to provide true buffering (rather than a pass-FET solution) without using a static voltage offset or incremental offset. This means that the VOL on both the A and B sides of the TCA9801 are very low (approximately 0.2 V), helping to eliminate communication issues as a result of fixed VIL thresholds. Another key feature of the TCA9801 is that there are no power sequencing requirements, or power supply dependencies. VCCA can be greater than, less than, or equal to VCCB. This gives the system designer flexibility with how the TCA9801 is used.

The TCA9801 is part of a four device family with varying current source strengths (see the Device Comparison Table).

다운로드 스크립트와 함께 비디오 보기 비디오

기술 자료

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
10개 모두 보기
상위 문서 유형 직함 형식 옵션 최신 영어 버전 다운로드 날짜
* 데이터 시트 TCA9801 Level-Translating I2C Bus Buffer/Repeater datasheet (Rev. B) PDF | HTML 2020. 2. 13
애플리케이션 노트 Understanding Transient Drive Strength vs. DC Drive Strength in Level-Shifters (Rev. A) PDF | HTML 2024. 7. 3
Application brief Best Practices: I2C Devices on an I3C Shared Bus PDF | HTML 2023. 3. 30
애플리케이션 노트 Why, When, and How to use I2C Buffers 2018. 5. 23
애플리케이션 노트 Advantages and Design Considerations of the TCA980x Family 2017. 3. 30
애플리케이션 노트 Choosing the Correct I2C Device for New Designs PDF | HTML 2016. 9. 7
선택 가이드 I2C Infographic Flyer 2015. 12. 3
애플리케이션 노트 Understanding the I2C Bus PDF | HTML 2015. 6. 30
애플리케이션 노트 Maximum Clock Frequency of I2C Bus Using Repeaters 2015. 5. 15
애플리케이션 노트 I2C Bus Pull-Up Resistor Calculation PDF | HTML 2015. 2. 13

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TCA9802EVM — TCA980x I²C 및 SMBus 레벨 시프터 제품군 평가 모듈

TCA9802EVM 평가 모듈(EVM)을 사용하면 사용자가 전원을 연결하고 I2C 명령을 온보드 슬레이브 장치인 TMP102에 버퍼링 및 변환할 수 있습니다. EVM을 사용하면 설계자가 여러 정전식 부하를 로드하고 테스트할 수 있으며 인덕터로 직렬 저항을 대체하여 케이블의 기생 인덕턴스를 에뮬레이션할 수 있습니다. 상승 시간, 소비 전력 및 지연 시간 등의 매개 변수를 쉽고 정확하게 평가할 수 있습니다.
사용 설명서: PDF
지원되는 제품 및 하드웨어
재고 있음
제한:
??asset.out-of-stock-ti_ko_KR??
이용할 수 없음
설계 툴

I2C-DESIGNER — I2C 디자이너 툴

I2C 설계자 툴을 사용하여 I2C 기반 설계의 주소 지정, 전압 레벨 및 주파수의 충돌을 신속하게 해결합니다. 마스터 및 슬레이브 입력을 입력하여 I2C 트리를 자동으로 생성하거나 사용자 지정 솔루션을 쉽게 구축합니다. 이 툴을 사용하면 설계자가 누락 승인을 디버깅하고, 풀업 저항을 선택하고, I2C 버스의 최대 커패시턴스 부하를 충족하는 방법에 대한 지침을 통해 시간을 절약하고 I2C 표준을 준수할 수 있습니다. 
지원되는 제품 및 하드웨어
패키지 CAD 기호, 풋프린트 및 3D 모델
VSSOP (DGK) 8 Ultra Librarian

주문 및 품질

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상