TLIN821-Q1
- AEC-Q100 Qualified for automotive applications
- Compliant to LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A and ISO 17987–4 electrical physical layer (EPL) specification
- Compliant to SAE J2602-1 LIN Network for Vehicle Applications
- Functional Safety-Capable
- Wide input operational voltage range:
- VSUP range from 5.5V to 28V
- LIN transmit data rate up to 20kbps
- LIN receive data rate up to 100kbps
- Operating modes: Normal, Standby and Sleep
- Low-power mode wake-up support with source recognition:
- Remote wake-up over the LIN bus
- Local wake-up via the WAKE pin
- Local wake-up via EN
- Integrated 37kΩ LIN pull-up resistor
- Control of system-level power using the INH pin
- Power-up and down glitch-free operation on LIN bus and RXD output
- Protection features:
- ±40V LIN bus fault tolerant
- 40V load dump support
- Undervoltage protection on VSUP
- TXD dominant state time-out, thermal shutdown
- Unpowered node or ground disconnection fail-safe at system level
- Junction temperatures from -40°C to 150°C
- 8-pin SOIC and leadless VSON-8 package with improved automated optical inspection (AOI) capability
The TLIN821-Q1 is a local interconnect network (LIN) physical layer transceiver. LIN is a low-speed universal asynchronous receiver transmitter (UART) communication protocol, that supports automotive in-vehicle networking.
The TLIN821-Q1 transmitter supports data rates up to 20kbps. The transceiver controls the state of the LIN bus through the TXD pin and reports the state of the bus on its open-drain RXD output pin. The device has a current-limited wave-shaping driver to reduce electromagnetic emissions (EME).
The TLIN821-Q1 is designed to support 12V applications with a wide input voltage operating range. The device supports low-power sleep mode, as well as wake-up from low-power mode through wake over LIN, the WAKE pin, or the EN pin. The device allows system-level reductions in battery current consumption, by selectively enabling the various power supplies that can be present on a node through the device INH output pin.
The device integrates a resistor for LIN responder node applications, ESD protection, and fault protection which allow a reduced amount of external components in the applications. The device prevents back-feed current through LIN to the supply input due to a ground shift or supply voltage disconnection.
관심 가지실만한 유사 제품
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | TLIN821-Q1 Automotive Fault-Protected LIN Transceiver with Inhibit and Wake datasheet | PDF | HTML | 2026. 3. 24 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TLIN1021DEVM — WAKE 및 INH를 지원하는 TLIN1021-Q1 LIN(로컬 상호 연결 네트워크) 트랜시버 평가 모듈
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOIC (D) | 8 | Ultra Librarian |
| VSON (DRB) | 8 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.