TPD1S514
- Overvoltage Protection at VBUS_CON
up to 30-V DC - Precision OVP ( < ± 1% Tolerance)
- Low RON nFET Switch Supports Host and Charging Mode
- Dedicated VBUS_POWER Pin Offers Flexible Power up Options Under Dead Battery Condition
- Transient Protection for VBUS Line:
- IEC 61000-4-2 Contact Discharge ±15 kV
- IEC 61000-4-2 Air Gap Discharge ±15 kV
- IEC 61000-4-5 Open Circuit Voltage 100 V
- Precision Clamp Circuit Limits the VBUS_SYS Voltage < VOVP
- USB Inrush Current Compliant
- Thermal Shutdown (TSD) Feature
The TPD1S514 Family consists of single-chip protection solutions for 5-V, 9-V or 12-V USB VBUS lines, or other power buses. The bidirectional nFET switch ensures safe current flow in both charging and host mode while protecting the internal system circuits from any over voltage condition at the VBUS_CON pin. On the VBUS_CON pin, this device can handle over voltage protection up to 30-V DC. After the EN pin toggles low, any device in the TPD1S514 Family waits 20 ms before turning ON the nFET through a soft start delay.
Typical application interfaces for the TPD1S514 Family are VBUS lines in USB connectors typically found in cell phones, tablets, eBooks, and portable media players. The TPD1S514 Family can also be applied to any system using an interface for a 5-V, 9-V, or 12-V power rail.
기술 문서
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | TPD1S514x Family USB Charger Overvoltage, Surge and ESD Protection for VBUS PIN datasheet (Rev. F) | PDF | HTML | 2019/05/08 |
| User guide | Reading and Understanding an ESD Protection Data Sheet (Rev. A) | PDF | HTML | 2023/09/19 | |
| Application note | ESD Protection Layout Guide (Rev. A) | PDF | HTML | 2022/04/07 | |
| Technical article | Big USB Type-C™ protection for your small application | PDF | HTML | 2017/07/31 | |
| Selection guide | ESD by Interface Selection Guide (Rev. A) | 2017/06/26 | ||
| White paper | Designing USB for short-to-battery tolerance in automotive environments | 2016/02/10 | ||
| User guide | TPD1S514-2EVM User’s Guide | 2014/07/24 | ||
| User guide | TPD1S514-3EVM User’s Guide | 2014/07/24 | ||
| EVM User's guide | TPD1S514EVM (Rev. A) | 2014/05/07 | ||
| Analog Design Journal | Design Considerations for System-Level ESD Circuit Protection | 2012/09/25 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPD1S514-1EVM — TPD1S514-1EVM USB 충전기 과전압 서지 및 ESD 보호 평가 모듈
Texas Instrument’s TPD1S514 evaluation module helps designers evaluate the operation and performance of the TPD1S514 device. The TPD1S514 is a single-chip solution for USB connector’s VBUS line protection. The bi-directional nFET switch ensures safe current flow in both charging and (...)
TPD1S514-3EVM — TPD1S514-3EVM USB 충전기 과전압 서지 및 ESD 보호 평가 모듈
Texas Instrument’s TPD1S514-3 evaluation module helps designers evaluate the operation and performance of the TPD1S514-3 device. The TPD1S514-3 is a single-chip solution for a USB connector’s VBUS line protection. The bi-directional nFET switch ensures safe current flow in both charging (...)
PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 (...)
TINA-TI — SPICE 기반 아날로그 시뮬레이션 프로그램
| 패키지 | 핀 | 다운로드 |
|---|---|---|
| DSBGA (YZ) | 12 | 옵션 보기 |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치