TPD3S014
- Continuous Current Ratings of 0.5 A and 1.5 A
- Fixed, Constant Current Limits of 0.85 A and
2.15 A (Typ) - Fast Overcurrent Response – 2 μs
- Integrated Output Discharge
- Reverse Current Blocking
- Short-Circuit Protection
- Over Temperature Protection With Auto-Restart
- Built-In Soft Start
- Ambient Temperature Range: -40°C to 85°C
- Product Regulatory Compliance
- UL Recognized Component (UL 2367, Standard for Solid State Overcurrent Protectors)
- CB File No. E169910 to IEC 60950-1, Information Technology Equipment
- IEC 61000-4-2 Level 4 ESD Protection (External Pins)
- ±12-kV Contact Discharge (IEC 61000-4-2)
- ±15-kV Air Gap Discharge (IEC 61000-4-2)
The TPD3S0x4s are integrated devices that feature a current-limited load switch and a two-channel transient voltage suppressor (TVS) based electrostatic discharge (ESD) protection diode array for USB interfaces.
The TPD3S0x4 devices are intended for applications such as USB where heavy capacitive loads and short-circuits are likely to be encountered; TPD3S0x4s provide short-circuit protection and overcurrent protection. The TPD3S0x4s limit the output current to a safe level by operating in constant current mode when the output load exceeds the current limit threshold. The fast overload response eases the burden on the main 5-V power supply by quickly regulating the power when the output is shorted. The rise and fall times for the current limit switch are controlled to minimize current surges when turning the device on and off.
The TPD3S014 and TPD3S044 will allow 0.5 A and 1.5 A of continuous current, respectively. The TVS diode array is rated to dissipate ESD strikes above the maximum level specified in the IEC 61000-4-2 international standard.
The high level of integration, combined with its easy-to-route DBV package, allows this device to provide great circuit protection for USB interfaces in applications like laptops, high-definition digital TVs, set-top boxes, and electronic point of sale equipment.
기술 자료
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | TPD3S0x4 Current Limit Switch and D+/D– ESD Protection for USB Host Ports datasheet (Rev. B) | PDF | HTML | 2015/08/31 |
| User guide | Reading and Understanding an ESD Protection Data Sheet (Rev. A) | PDF | HTML | 2023/09/19 | |
| Application note | ESD Protection Layout Guide (Rev. A) | PDF | HTML | 2022/04/07 | |
| Certificate | TPD3S014 UL Certificate of Compliance IEC 62368-1 | 2020/09/07 | ||
| Certificate | TPS2065D UL Certificate of Compliance IEC 62368-1 | 2020/09/07 | ||
| Selection guide | ESD by Interface Selection Guide (Rev. A) | 2017/06/26 | ||
| White paper | Designing USB for short-to-battery tolerance in automotive environments | 2016/02/10 | ||
| EVM User's guide | TPD3S014EVM User's Guide | 2014/09/11 | ||
| Analog Design Journal | Design Considerations for System-Level ESD Circuit Protection | 2012/09/25 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPD3S014EVM — TPD3S014 통합 USB 보호 기능과 VBUS 전류 제한 평가 모듈
TPD3S014EVM 평가 모듈(EVM)에는 테스트를 위한 다양한 구성의 TPD3S014 다섯 개가 포함되어 있습니다. TPD3S014 하나는 IEC61000-4-2 규격 준수 테스트를 위해 구성되어 있고, 하나는 4포트 s 매개 변수 분석을 위해 구성되어 있으며, 또 하나는 전류 제한 스위치를 평가하기 위한 것입니다. 그리고 다른 하나는 USB 2.0 Type-A 커넥터의 처리량 분석을 위해 구성되어 있고, 마지막 하나는 ESD 이벤트 발생 시 클램핑 파형을 캡처하기 위해 구성되어 있습니다.
TPD3S014 Unencrypted PSpice Transient Model Package (Rev. A)
PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 착수하기 (...)
TINA-TI — SPICE 기반 아날로그 시뮬레이션 프로그램
TIDA-01373 — EEPROM 프로그래밍 툴 레퍼런스 디자인
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOT-23 (DBV) | 6 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치