TPS22968
- Integrated Dual Channel Load Switch
- Input Voltage Range: 0.8 V to 5.5 V
- VBIAS Voltage Range: 2.5 V to 5.5 V
- Ideal for 1S Battery Configuration
- Ultra-Low RON Resistance
- RON = 27 mΩ at VIN = 5 V (VBIAS = 5 V)
- RON = 25 mΩ at VIN = 3.3 V (VBIAS = 5 V)
- RON = 25 mΩ at VIN = 1.8 V (VBIAS = 5 V)
- 4-A Maximum Continuous Switch Current per Channel
- Low Quiescent Current
- 55 µA at VBIAS = 5 V (Both Channels)
- 55 µA at VBIAS = 5 V (Single Channel)
- Low Control Input Threshold Enables Use of
1.2-,1.8-, 2.5-, 3.3-V Logic - Configurable Rise Time(1)
- Quick Output Discharge (QOD)(2) (Optional)
- SON 14-Pin Package with Thermal Pad
- ESD Performance Tested per JEDEC Standard
- 2-kV HBM and 1-kV CDM
- Latch-Up Performance Exceeds 100 mA per JESD 78, Class II
- GPIO Enable – Active High
- TPS22968N: Product Preview Only (1) (2)
(1)See the Application Information section for CT value vs. rise time
(2)This feature discharges the output of the switch to GND through a 270-Ω resistor, preventing the output from floating.
The TPS22968x is a small, ultra-low RON, dual-channel load switch
with controlled turn on. The device contains two N-channel MOSFETs that can operate over an input
voltage range of 0.8 to 5.5 V and can support a maximum continuous current of
4 A per channel. Each switch is independently controlled by an on and off input (ON1 and
ON2), which is capable of interfacing directly with low-voltage control signals. In TPS22968, a
270-Ω on-chip load resistor is added for output quick discharge when switch is turned off.
The TPS22968x is available in a small, space-saving package (DPU) with integrated thermal pad allowing for high power dissipation. The device is characterized for operation over the free-air temperature range of –40 to +105°C.
관심 가지실만한 유사 제품
비교 대상 장치보다 업그레이드된 기능을 지원하는 즉각적 대체품.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | TPS22968 Dual Channel, Ultra-Low Resistance Load Switch datasheet (Rev. F) | PDF | HTML | 2017. 7. 17 | |
| 애플리케이션 노트 | Load Switch Thermal Considerations (Rev. A) | 2018. 10. 11 | |||
| 애플리케이션 노트 | Basics of Load Switches (Rev. A) | 2018. 9. 5 | |||
| 애플리케이션 노트 | Selecting a Load Switch to Replace a Discrete Solution | 2017. 4. 30 | |||
| 애플리케이션 노트 | Timing of Load Switches | 2017. 4. 27 | |||
| 애플리케이션 노트 | Quiescent Current vs Shutdown Current for Load Switch Power Consumption | 2016. 3. 30 | |||
| 애플리케이션 노트 | Managing Inrush Current (Rev. A) | 2015. 5. 28 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
LP-MSP430FR2476 — MSP430FR2476 LaunchPad™ 개발 키트
LP-MSP430FR2476 LaunchPad&™ 개발 키트는 MSP430FR2476 밸류 라인 감지 마이크로컨트롤러(MCU) 기반의 사용하기 쉬운 평가 모듈(EVM)입니다. 프로그래밍, 디버깅 및 에너지 측정을 위한 온보드 디버그 프로브를 포함하여 MSP430FR2x 밸류 라인 센서 MCU 플랫폼에서 개발을 시작하는 데 필요한 모든 것이 포함되어 있습니다. 보드에는 버튼 2개, LED 2개(하나는 RGB LED), 그리고 간단한 사용자 인터페이스를 만들 수 있는 아날로그 온도 센서가 포함되어 있습니다. 또한 CR2032 배터리 (...)
TPS22968EVM-007 — TPS22968EVM-007 평가 모듈
The TPS22968 device is a dual switch ultra low Ron device with an operating voltage range of 0.8 V to 5.5 V, Each switch is capable of handling continuous currents of 4 A. The TPS22968 device is demonstrated using the TPS22968EVM-007 module. The Dual Load Switch device can be configured in either a (...)
MSP-EXP430G2ET — 밸류 라인 MCU용 MSP430™ LaunchPad™ 개발 키트
TPS22968 and TPS22968-Q1 Unencrypted PSpice Transient Model Package (Rev. A)
TPS22968N and TPS22968N-Q1 Unencrypted PSpice Transient Model Package (Rev. A)
TIDA-00267 — 극성 보정 절연 CAN 레퍼런스 디자인
A ready to use design that efficiently solves the problem of improper installation by adding antiparallel communication channels and appropriate control signal to enable polarity correction for the Controller Area Network (CAN) bus.
TIDA-00663 — LIDAR 펄스 ToF(Time of Flight) 레퍼런스 설계
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| WSON (DPU) | 14 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.