LP-MSP430FR2476
MSP430FR2476 LaunchPad™ 개발 키트
LP-MSP430FR2476
개요
LP-MSP430FR2476 LaunchPad&™ 개발 키트는 MSP430FR2476 밸류 라인 감지 마이크로컨트롤러(MCU) 기반의 사용하기 쉬운 평가 모듈(EVM)입니다. 프로그래밍, 디버깅 및 에너지 측정을 위한 온보드 디버그 프로브를 포함하여 MSP430FR2x 밸류 라인 센서 MCU 플랫폼에서 개발을 시작하는 데 필요한 모든 것이 포함되어 있습니다. 보드에는 버튼 2개, LED 2개(하나는 RGB LED), 그리고 간단한 사용자 인터페이스를 만들 수 있는 아날로그 온도 센서가 포함되어 있습니다. 또한 CR2032 배터리 홀더(배터리 별도 구매)가 있어 외부 전원 공급 장치 없이 독립형 애플리케이션을 사용할 수 있습니다.
16MHz MSP430FR2476 장치는 초저전력, 높은 내구성, 고속 쓰기 액세스로 잘 알려져 있는 비휘발성 메모리인 64KB 내장된 FRAM(Ferroelectric Random Access Memory)을 특징으로 합니다. 8KB의 온칩 SRAM과 결합하면 사용자는 64KB의 메모리를 사용하여 필요에 따라 프로그램과 데이터 사이를 분할할 수 있습니다. 예를 들어, 데이터 로깅 애플리케이션에는 프로그램 메모리가 비교적 작은 대용량 데이터 메모리가 필요할 수 있으므로 프로그램과 데이터 메모리 사이에 필요에 따라 메모리를 할당할 수 있습니다.
특징
- MSP430FR2476 16비트 MCU 기반의 ULP FRAM 기술
- 초저전력 디버깅에 사용 가능한 EnergyTrace™ 소프트웨어 기술이 포함된 온보드 eZ-FET 디버그 프로브
- BoosterPack™ 플러그인 모듈 에코시스템을 이용한 40핀 LaunchPad 개발 키트 표준
- 사용자 상호 작용을 위한 사용자 버튼 2개 및 LED 2개
- 온보드 TMP235 정밀 CMOS 선형 아날로그 온도 센서
- LP-MSP430FR2476 LaunchPad 개발 키트
- 마이크로 USB 케이블
MSP430 microcontrollers
주문 및 개발 시작
LP-MSP430FR2476 — MSP430FR2476 LaunchPad™ development kit
LP-MSP430FR2476 — MSP430FR2476 LaunchPad™ development kit
MSP-GANG-SOFTWARE — MSP-GANG Software
지원되는 제품 및 하드웨어
제품
Arm Cortex-M0+ MCU
MSP430 microcontrollers
반도체
하드웨어 개발
개발 키트
평가 보드
MSP-GANG-SOFTWARE — MSP-GANG Software
MSP-GANG Installer 1.03.09.00
제품
Arm Cortex-M0+ MCU
MSP430 microcontrollers
반도체
하드웨어 개발
개발 키트
평가 보드
문서
MSP-GANG Manifest
출시 정보
The MSP Gang Programmer is a MSPM0/MSP430/MSP432 device programmer that can program up to eight identical flash or FRAM devices at the same time. The MSP Gang Programmer connects to a host PC using a standard RS-232 or USB connection and provides flexible programming options that allow the user to fully customize the process.
The MSP Gang Programmer is provided with an expansion board, called the Gang Splitter, that implements the interconnections between the MSP Gang Programmer and multiple target devices. Eight cables are provided that connect the expansion board to eight target devices (via JTAG or Spy-Bi-Wire connectors). The programming can be done with a PC or as a standalone device. A PC-side Graphical User Interface is also available and is DLL-based.
Features:
- Quickly and reliably program Flash or FRAM-based MSP devices via an RS-232 or USB interface
- Several programming modes:
- Interactive Mode Programming while connected to PC using the MSP GANG Programmer GUI
- Program from Image: An image can be stored, which contains configuration options and code files. This allows users to program MSP devices standalone, without a PC
- Programming from Script: Enables developers to automate more complicated programming procedures.
- Intuitive GUI for configuring, programming and testing production setup
- SD Card slot for storing images
- LCD screen for easy programming without a PC
- Supports up to 8 targets simultaneously
- Supports MSPM0/MSP430/MSP432 devices
새 소식
- Added low-power mode debug support for MSPM0
LP-MSP430FR2476-SW — LP-MSP430FR2476 software examples
지원되는 제품 및 하드웨어
LP-MSP430FR2476-SW — LP-MSP430FR2476 software examples
설계 파일
기술 자료
| 유형 | 직함 | 최신 영어 버전 다운로드 | 날짜 | ||
|---|---|---|---|---|---|
| 추가 자료 | LP-MSP430FR2476 software examples | 2019. 5. 7 | |||
| 인증서 | LP-MSP430FR2476 EU Declaration of Conformity (DoC) | 2019. 3. 26 | |||
| 사용 설명서 | MSP430FR2476 LaunchPad development kit (LP-MSP430FR2476) user's guide | PDF | HTML | 2019. 3. 13 |