TPS54331
- 3.5 to 28-V input voltage range
- Adjustable output voltage down to 0.8 V
- Integrated 80-mΩ high-side MOSFET supports up to 3-A continuous output current
- High efficiency at light loads with a pulse skipping Eco-mode
- Fixed 570-kHz switching frequency
- Typical 1-µA shutdown quiescent current
- Adjustable slow-start limits inrush currents
- Programmable UVLO threshold
- Overvoltage transient protection
- Cycle-by-cycle current limit, frequency foldback, and thermal shutdown protection
- Available in easy-to-use SOIC8 package or thermally-enhanced SOIC8 PowerPAD™ integrated circuit package
- Create a custom design using the TPS54331 with the WEBENCH Power Designer
- Use TPS62933 for a 30 VIN converter with higher frequency, lower IQ and improved EMI
The TPS54331 device is a 28-V, 3-A non-synchronous buck converter that integrates a low R DS(on) high-side MOSFET. To increase efficiency at light loads, a pulse skipping Eco-mode feature is automatically activated. Furthermore, the 1-µA shutdown supply-current allows the device to be used in battery-powered applications. Current mode control with internal slope compensation simplifies the external compensation calculations and reduces component count while allowing the use of ceramic output capacitors. A resistor divider programs the hysteresis of the input undervoltage lockout. An overvoltage transient protection circuit limits voltage overshoots during start-up and transient conditions. A cycle-by-cycle current-limit scheme, frequency foldback and thermal shutdown protect the device and the load in the event of an overload condition. The TPS54331 device is available in an 8-pin SOIC package and 8-pin SO PowerPAD integrated circuit package that have been internally optimized to improve thermal performance.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | TPS54331 3-A, 28-V Input, Step Down DC-DC Converter With Eco-mode datasheet (Rev. H) | PDF | HTML | 2023. 10. 10 | |
| 애플리케이션 노트 | Low Dropout Operation in a Buck Converter (Rev. A) | 2019. 4. 1 | |||
| 선택 가이드 | Power Management Guide 2018 (Rev. R) | 2018. 6. 25 | |||
| 애플리케이션 노트 | Understanding Eco-mode(TM) Operation | 2016. 12. 5 | |||
| 애플리케이션 노트 | Demystifying Type II and Type III Compensators Using Op-Amp and OTA for DC/DC Co | 2014. 7. 11 | |||
| 애플리케이션 노트 | Simple CC/CV Charger using TPS54331 | 2012. 11. 30 | |||
| 애플리케이션 노트 | Create an Inverting Power Supply from a Step-Down Regulator (Rev. B) | 2012. 10. 26 | |||
| 애플리케이션 노트 | Designing Type III Compensation for Current Mode Step-Down Converters (Rev. A) | 2010. 9. 15 | |||
| 아날로그 디자인 학술지 | Efficiency of synchronous versus nonsynchronous buck converters | 2009. 10. 4 | |||
| 애플리케이션 노트 | Understanding and Applying Current-Mode Control Theory | 2007. 8. 19 | |||
| 애플리케이션 노트 | Modeling, Analysis and Compensation of the Current-Mode Converter | 1999. 9. 5 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS54331EVM-232 — TPS54331 28V 입력, 3.3V 출력, 3A 평가 모듈
The TPS54331EVM-232 is a fully assembled and tested circuit for evaluating the TPS54331 synchronous step-down SWIFT™ converter. The EVM converts a 3.5-V to 28-V input voltage to a regulated 3.3-V output voltage that delivers up to 3-A output. The switching frequency is internally set at a (...)
TPS54331 Unencrypted PSpice Transient Model Package (Rev. A)
SWIFTINV-CALC — SWIFT™ Converter Inverting Buck/Boost Calculator
The SWIFTINV-CALC Excel sheet is a complementary worksheet to the SLVA317 application note. The worksheet is used to calculate the external components needed to create a negative output voltage from a positive input voltage. The tool features several families of wide input voltage, current-mode (...)
SWIFTPOSNEG-CALC — TPS54160 Pos/Neg Calculation Utility Download
The SWIFTPosNeg-CALC Excel sheet is a complementary worksheet to the SLVA369 application note.
This worksheet is used to calculate the external components needed to create a dual output (i.e. positive and negative) power supply using a step-down switching regulator and catalog off the shelf coupled (...)
TIDA-00393 — 대기 모드 효율 향상을 위한 LDO 추가 레퍼런스 디자인
This regulation topology is designed to increase the efficiency of a DC/DC buck converter by disabling the converter during light-load operation and providing a regulated output voltage with a low-Iq LDO. During no-load or light-load conditions, the LDO allows for low-noise, low-Iq output voltage (...)
TIDA-010055 — 보호 릴레이 모듈을 위한 진단 기능이 포함된 비절연 전원 아키텍처 레퍼런스 설계
TIDA-01243 — 비디오 및 충전 지원 USB Type-C™ 및 전원 공급 미니 도크 레퍼런스 디자인
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOIC (D) | 8 | Ultra Librarian |
| HSOIC (DDA) | 8 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.