TUSB1044A
- Protocol agnostic reversible 4-channel linear redriver supporting up to 10Gbps
- USB Type-C with USB 3.2 Gen 2 x2 and DisplayPort™ 2.1 as alternate mode
- Supports processors with USB 3.2 and DisplayPort™ mux integrated for Type-C applications
- Supports signal conditioning inside Type-C cable
- Cross-point mux for SBU signals
- Linear equalization up to 11dB at 4.05GHz
- GPIO and I2C control for channel direction and equalization
- Advanced power management by monitoring USB power states and snooping DP link training
- Configuration through GPIO or I2C
- Hot-plug capable
- Single 3.3V supply
- Industrial temperature: –40°C to 85°C (TUSB1044AI)
- Commercial temperature: 0°C to 70°C (TUSB1044A)
- 6mm × 4mm, 0.4mm pitch, 40-pin QFN package
The TUSB1044A is a USB Type-C Alt Mode redriver switch that supports data rates up to 10Gbps. This protocol-agnostic linear redriver can support USB Type-C Alt Mode interfaces including DisplayPort™.
The TUSB1044A provides several levels of receive linear equalization to compensate for inter-symbol interference (ISI) due to cable and board trace loss. The device operates on a single 3.3V supply and comes in a commercial and industrial temperature range.
All four lanes of the TUSB1044A are reversible and designed to make the device a versatile signal conditioner that can be used in many applications.
기술 자료
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
4개 모두 보기 | 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | TUSB1044A USB TYPE-C® 10Gbps Multi-Protocol Bidirectional Linear Redriver datasheet | PDF | HTML | 2025/03/18 |
| Application note | TUSB1044A New Features: USB3.2 GEN2x2 | PDF | HTML | 2025/10/10 | |
| Application note | Implementing USB Type-C® Using TI's Portfolio | PDF | HTML | 2025/09/16 | |
| Certificate | TUSB1044AEVM EU Declaration of Conformity (DoC) | 2025/03/05 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
평가 보드
TUSB1044AEVM — TUSB1044A 평가 모듈
TUSB1044A는 최대 10Gbps의 데이터 전송 속도를 지원하는 USB Type-C® 대체 모드 리드라이버 스위치입니다. 프로토콜에 구애받지 않는 이 선형 리드라이버는 DisplayPort™를 포함한 USB Type-C 대체 모드 인터페이스를 지원할 수 있습니다. 또한 TUSB1044A는 USB3.2 x2 모드에서 작동할 때 최대 20Gbps의 USB 3.2 데이터 속도를 지원합니다.
시뮬레이션 툴
PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®
TI용 PSpice®는 아날로그 회로의 기능을 평가하는 데 사용되는 설계 및 시뮬레이션 환경입니다. 완전한 기능을 갖춘 이 설계 및 시뮬레이션 제품군은 Cadence®의 아날로그 분석 엔진을 사용합니다. 무료로 제공되는 TI용 PSpice에는 아날로그 및 전력 포트폴리오뿐 아니라 아날로그 행동 모델에 이르기까지 업계에서 가장 방대한 모델 라이브러리 중 하나가 포함되어 있습니다.
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 착수하기 (...)
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 착수하기 (...)
시뮬레이션 툴
TINA-TI — SPICE 기반 아날로그 시뮬레이션 프로그램
TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
사용 설명서: PDF
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| WQFN (RNQ) | 40 | Ultra Librarian |
주문 및 품질
포함된 정보:
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
포함된 정보:
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.