전력 관리 AC/DC 및 DC/DC 컨트롤러(외장 FET)

UCC256404

활성

초저전력 및 초저소음 대기 작동 및 고전압 시동을 지원하는 LLC 공진 컨트롤러

이 제품의 최신 버전이 있습니다

open-in-new 대안 비교
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
신규 UCC25661 활성 고전압 시동을 지원하는 넓은 VIN 및 VOUT 750kHz LLC 컨트롤러 Capable of higher operating frequency and supports wider VIN/VOUT operation

제품 상세 정보

Rating Catalog Topology Half bridge, LLC Vin (max) (V) 30 Vin (min) (V) 13 Control mode Current Features HV Start-up, High voltage gate driver integrated, High voltage startup, High-voltage startup, Hybrid hysteretic control, Integrated X-cap discharge, LLC, Light load efficiency, Light-load efficiency, Low power, USB C/PD compatible, Wide AC input, X cap discharge integrated, X capacacitor discharge integrated, Zero voltage switching Operating temperature range (°C) -40 to 125
Rating Catalog Topology Half bridge, LLC Vin (max) (V) 30 Vin (min) (V) 13 Control mode Current Features HV Start-up, High voltage gate driver integrated, High voltage startup, High-voltage startup, Hybrid hysteretic control, Integrated X-cap discharge, LLC, Light load efficiency, Light-load efficiency, Low power, USB C/PD compatible, Wide AC input, X cap discharge integrated, X capacacitor discharge integrated, Zero voltage switching Operating temperature range (°C) -40 to 125
SOIC (DDB) 14 59.4 mm² 9.9 x 6
  • Optimized low power mode and burst mode algorithm
    • Burst mode with Soft-ON and Soft-OFF periods
    • Minimized audible noise at no load and standby
    • User option to disable burst mode
    • Opto-coupler low power operation
    • Efficiency performance exceeds DoE Level VI and EU CoC Tier-2 External Power Supply Standards
  • Hybrid hysteretic control (HHC)
    • Best-in-class transient response
    • Fast exit from burst mode
  • Robust adaptive dead-time control
  • Integrated high-voltage gate driver with 0.6 A source and 1.2 A sink capability
  • Robust capacitive region (ZCS) avoidance scheme
  • Over temperature, output over voltage, input under voltage protection, three levels of over current protection
  • Integrated high voltage startup function
  • Active X-capacitor discharge function
  • Optimized low power mode and burst mode algorithm
    • Burst mode with Soft-ON and Soft-OFF periods
    • Minimized audible noise at no load and standby
    • User option to disable burst mode
    • Opto-coupler low power operation
    • Efficiency performance exceeds DoE Level VI and EU CoC Tier-2 External Power Supply Standards
  • Hybrid hysteretic control (HHC)
    • Best-in-class transient response
    • Fast exit from burst mode
  • Robust adaptive dead-time control
  • Integrated high-voltage gate driver with 0.6 A source and 1.2 A sink capability
  • Robust capacitive region (ZCS) avoidance scheme
  • Over temperature, output over voltage, input under voltage protection, three levels of over current protection
  • Integrated high voltage startup function
  • Active X-capacitor discharge function

The UCC25640x is a fully featured LLC controller with integrated high-voltage gate driver. It has been designed to pair with a PFC controller to provide a complete power system using a minimum of external components. The resulting power system is designed to meet the most stringent requirements for standby power without the need for a separate standby power converter.

UCC25640x provides a highly efficient burst mode with soft-on and soft-off periods to minimize audible noise at standby operation. The burst power level and hysteresis are programmable, simplifying the optimization of efficiency and burst mode operation. Burst mode can also be disabled through pin configuration. UCC25640x uses hybrid hysteretic control to provide best in class line and load transient response.

UCC25640x includes a range of features designed to make LLC converter operation well controlled and protected. It can be used with UCC28056 or UCC28064A PFC controllers, along with UCC24624 synchronous rectifier controller to offer a complete power supply solution.

The UCC25640x is a fully featured LLC controller with integrated high-voltage gate driver. It has been designed to pair with a PFC controller to provide a complete power system using a minimum of external components. The resulting power system is designed to meet the most stringent requirements for standby power without the need for a separate standby power converter.

UCC25640x provides a highly efficient burst mode with soft-on and soft-off periods to minimize audible noise at standby operation. The burst power level and hysteresis are programmable, simplifying the optimization of efficiency and burst mode operation. Burst mode can also be disabled through pin configuration. UCC25640x uses hybrid hysteretic control to provide best in class line and load transient response.

UCC25640x includes a range of features designed to make LLC converter operation well controlled and protected. It can be used with UCC28056 or UCC28064A PFC controllers, along with UCC24624 synchronous rectifier controller to offer a complete power supply solution.

다운로드 스크립트와 함께 비디오 보기 동영상

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
15개 모두 보기
유형 직함 날짜
* Data sheet UCC25640x LLC Resonant Controller with Ultra-Low Audible Noise and Standby Power datasheet (Rev. E) PDF | HTML 2021/02/19
Technical article 디지털 컨트롤러를 사용하여 2차 측에서 LLC 전류 모드 제어 구현 PDF | HTML 2025/08/06
Certificate UCC256404 IEC 62368 2025/06/12
Application note Zero Current Switching Issues with Burst Mode in LLC Controllers (Rev. A) PDF | HTML 2025/04/09
Technical article 전체 작동 조건에서 테스트하기 전에 LLC 공진 탱크 측정 PDF | HTML 2024/03/21
Technical article 오디오 증폭기를 위한 LLC 설계 고려 사항 PDF | HTML 2024/03/13
Application note Most Frequently Asked Questions About the UCC25640x LLC Resonant Controller PDF | HTML 2023/06/05
Application note UCC25640x LLC Resonant Controller Features Brief Overview and Bring up Guideline PDF | HTML 2022/06/20
Application note Improving Transient Response in LLC Converters Using Hybrid Hysteretic Control (Rev. B) 2021/04/07
Technical article How to reduce audible noise and power consumption at standby in your AC/DC design PDF | HTML 2020/04/22
Certificate UCC256404 IEC60065 Certification 2020/04/10
Certificate UCC256404 IEC60950 Certification 2020/02/19
Certificate UCC256404 IEC62368 Certification 2020/02/19
Application note Migrating to UCC25640x from UCC25630x (Rev. A) 2019/12/10
Application note Improving ZVS and efficiency in LLC converters 2018/11/05

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

PFCLLCSREVM034 — UCC28056B, UCC256404 및 UCC24624 사용 AC-절연 DC EVM 연결

PFCLLCSREVM034는 전환 모드 역률 보정 프론트 엔드 및 동기 정류를 지원하는 절연 하프 브리지 LLC 공진 컨버터를 갖춘 168W AC/DC 전원 공급 장치입니다. 이 EVM은 90Vrms~264Vrms의 AC 입력 전압 및 168W 전부하 출력 전원을 갖는 12V DC 출력을 지원합니다.

사용 설명서: PDF
TI.com에서 구매 불가
평가 보드

UCC25640EVM-020 — UCC25640x 하프브리지 LLC 평가 모듈

UCC25640EVM-020은 UCC256404를 사용하는 180W, LLC 공진 컨버터입니다. 이 EVM은 360V~410V의 DC 입력, 85VAC~264VAC의 AC 입력 전압, 180W의 전부하 출력 전원을 갖는 12VDC 출력을 지원합니다.
사용 설명서: PDF
TI.com에서 구매 불가
시뮬레이션 모델

UCC25640x Simplis Model

SLUM684.ZIP (178 KB) - SIMPLIS Model
계산 툴

SLUC675 UCC25640x Design Calculator

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

제품
AC/DC 및 DC/DC 컨트롤러(외장 FET)
UCC256402 초저 대기 전력의 고전압 시동을 지원하는 LLC 공진 컨트롤러 UCC256403 초저전력 및 초저소음 대기 작동을 지원하는 LLC 공진 컨트롤러 UCC256404 초저전력 및 초저소음 대기 작동 및 고전압 시동을 지원하는 LLC 공진 컨트롤러
레퍼런스 디자인

PMP40580 — 180W 범용 입력 PFC+LLC TV 전원 공급 장치 레퍼런스 설계

TV 애플리케이션을 위한 이 AC-DC 전원 공급 장치 설계는 범용 AC 전압(90Vac~264Vac)에서 12V, 5A 및 150V, 0.8A 출력을 제공합니다. 이 설계는 낮은 대기 전력과 더 작은 가청 잡음을 지원하는 향상된 버스트 모드가 있는 CRM/DCM PFC 컨트롤러 UCC28056 및 LLC 컨트롤러 UCC256404를 사용합니다.  이 설계는 150mW 부하로 250mW 미만의 대기 전력과 230Vac 입력에서 93%를 초과하는 피크 효율을 달성합니다.
Test report: PDF
회로도: PDF
레퍼런스 디자인

PMP31179 — 400W AC/DC 항공용 레퍼런스 설계

400Hz ~ 800Hz 범위의 주전원 주파수에서 작동하는 항공 애플리케이션을 위한 소형 30V DC, 400W 레퍼런스 설계입니다. UCC28064A에 기반한 2상 인터리브 전환 모드(TM) PFC(역률 보정)는 전력 역률을 수정하고 입력 전류의 고조파 콘텐츠를 최소화하는 데 사용됩니다. DC/DC는 UCC256404로 HB-LLC 단계를 사용하여 구현됩니다. 효율성은 보조 측에서 동기식 정류를 사용하여 더욱 향상됩니다.
Test report: PDF
레퍼런스 디자인

PMP22087 — 80 PLUS 플래티넘 규격 준수 성능의 336W Auxless AC/DC 전원 공급 장치 레퍼런스 설계

이 레퍼런스 설계는 범용 입력 AC 전압(90VAC~264VAC)에서 24V, 240W 연속, 336W 피크 출력을 제공하는 CRM(임계 전도 모드) PFC와 하프 브리지 LLC 시리즈 공진 컨버터를 갖춘 AC/DC 전원 공급 장치 설계입니다. 이 설계는 낮은 대기 전력 손실을 위해 버스트 모드가 활성화된 UCC28056 CRM/DCM PFC 컨트롤러, UCC256404 향상된 LLC 컨트롤러 및 UCC24612-2 동기 정류기 컨트롤러를 사용합니다. 이 설계는 115VAC에서 87mW, 230VAC에서 124mW를 달성하며, (...)
Test report: PDF
회로도: PDF
레퍼런스 디자인

PMP22088 — LLC 공진 컨버터 제어 카드 레퍼런스 설계

이 레퍼런스 설계는 LLC 컨버터의 제어 카드로, HV 시동, X-커패시터 방전 및 전력 FET용 드라이버를 포함하여 LLC 컨버터를 제어하기 위한 모든 필수 기능을 통합합니다. 고급 버스트 모드를 사용하면 PFC가 켜진 상태에서도 LLC 컨버터가 초저 대기 전력을 달성하는 데 도움이 됩니다. 이 설계는 유연한 평가를 지원하며 LLC 전력 보드의 모든 전력 정격에 적합합니다. 간단한 연결로 기존 전력계를 사용하여 벤치 테스트를 쉽게 설정할 수 있습니다. 
Test report: PDF
회로도: PDF
패키지 CAD 기호, 풋프린트 및 3D 모델
SOIC (DDB) 14 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상