증폭기 특수 기능 증폭기 4~20mA 신호 조절기

XTR105

활성

센서 여자 및 선형화를 지원하는 4~20mA 전류 트랜스미터

제품 상세 정보

Vs (min) (V) 7.5 Vs (max) (V) 36 Offset voltage drift (±) (max) (µV/°C) 3 Offset voltage (±) (max) (mV) 0.025 Product type 2-wire RTD conditioner Operating temperature range (°C) -40 to 85 Rating Catalog
Vs (min) (V) 7.5 Vs (max) (V) 36 Offset voltage drift (±) (max) (µV/°C) 3 Offset voltage (±) (max) (mV) 0.025 Product type 2-wire RTD conditioner Operating temperature range (°C) -40 to 85 Rating Catalog
SOIC (D) 14 51.9 mm² (8.65 mm × 6 mm) PDIP (N) 14 181.42 mm² (19.3 mm × 9.4 mm)
  • Low unadjusted error
  • Two precision current sources: 800µA each
  • Linearization
  • 2-wire or 3-wire RTD operation
  • Low offset drift: 0.4µV/°C
  • Low output current noise: 30nAPP
  • High PSRR: 110dB minimum
  • High CMRR: 86dB minimum
  • Wide supply range: 7.5V to 36V
  • Packages: DIP-14 and SOIC-14
  • Low unadjusted error
  • Two precision current sources: 800µA each
  • Linearization
  • 2-wire or 3-wire RTD operation
  • Low offset drift: 0.4µV/°C
  • Low output current noise: 30nAPP
  • High PSRR: 110dB minimum
  • High CMRR: 86dB minimum
  • Wide supply range: 7.5V to 36V
  • Packages: DIP-14 and SOIC-14

The XTR105 is a monolithic 4mA to 20mA, 2-wire current transmitter with two precision current sources. This device provides complete current excitation for platinum RTD temperature sensors and bridges, instrumentation amplifiers, and current output circuitry on a single integrated circuit.

Versatile linearization circuitry provides a 2nd-order correction to the RTD, typically achieving a 40:1 improvement in linearity.

Instrumentation amplifier gain can be configured for a wide range of temperature or pressure measurements. Total unadjusted error of the complete current transmitter is low enough to permit use without adjustment in many applications. This includes zero output current drift, span drift, and nonlinearity. The XTR105 operates on loop power-supply voltages down to 7.5V.

The XTR105 is available in DIP-14 and SOIC-14 surface-mount packages and is specified for the industrial temperature range of –40°C to +85°C.

The XTR105 is a monolithic 4mA to 20mA, 2-wire current transmitter with two precision current sources. This device provides complete current excitation for platinum RTD temperature sensors and bridges, instrumentation amplifiers, and current output circuitry on a single integrated circuit.

Versatile linearization circuitry provides a 2nd-order correction to the RTD, typically achieving a 40:1 improvement in linearity.

Instrumentation amplifier gain can be configured for a wide range of temperature or pressure measurements. Total unadjusted error of the complete current transmitter is low enough to permit use without adjustment in many applications. This includes zero output current drift, span drift, and nonlinearity. The XTR105 operates on loop power-supply voltages down to 7.5V.

The XTR105 is available in DIP-14 and SOIC-14 surface-mount packages and is specified for the industrial temperature range of –40°C to +85°C.

다운로드 스크립트와 함께 비디오 보기 비디오

관심 가지실만한 유사 제품

open-in-new 대안 비교
비교 대상 장치와 유사한 기능.
XTR108 활성 신호 컨디셔닝을 지원하는 4~20mA, 2선 트랜스미터 '스마트' 프로그래머블 This device offers a sub-regulator (5-V), dual programable current sources, autozeroed PGA, 6-channel mux, linearization circuitry, and SPI interface.

기술 자료

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
6개 모두 보기
상위 문서 유형 직함 형식 옵션 최신 영어 버전 다운로드 날짜
* 데이터 시트 XTR105 4-20mA Current Transmitter With Sensor Excitation and Linearization datasheet (Rev. D) PDF | HTML 2025. 12. 12
아날로그 디자인 학술지 4Q 2011 Issue Analog Applications Journal 2011. 11. 9
아날로그 디자인 학술지 Analog linearization of resistance temperature detectors 2011. 11. 9
애플리케이션 노트 20mA to 0-20mA Converter & Current Summing Current-to-Current Converters 2000. 10. 2
애플리케이션 노트 FOUR-WIRE RTD CURRENT-LOOP TRANSMITTER 2000. 9. 27
애플리케이션 노트 IC Building Blocks Form Complete Isolated 4-20mA Current-Loop 2000. 9. 27

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

DLPNIRSCANEVM — DLP® NIRscan™ 평가 모듈

 

DLP NIRscan은 경제적인 고성능 근적외선 분광계를 설계하기 위한 완벽한 EVM(평가 모듈)입니다.  유연한 이 툴에는 설계자가 DLP 기반 분광계 개발을 바로 시작하는 데 필요한 모든 것이 포함되어 있습니다.  EVM은 근적외선(NIR) 조명에 최적화된 최초의 DLP 칩셋인 DLP 0.45 WXGA NIR 칩셋을 사용합니다.  DLP 기술을 통해 식품, 제약, 석유/가스 및 기타 신흥 산업에서 사용되는 분광기는 공장 및 현장에서 실험실 수준의 성능을 제공할 수 있게 됩니다. 분광학에 대해 자세히 알아보기

전원 공급 장치는 (...)

사용 설명서: PDF
지원되는 제품 및 하드웨어
재고 있음
제한:
??asset.out-of-stock-ti_ko_KR??
이용할 수 없음
계산 툴

XTR-ERROR-CALC — Current Transmitter Error Calculator

이 스프레드시트는 전류 트랜스미터(XTR) 장치 및 외부 부품에 대한 오류를 계산합니다.

지원되는 제품 및 하드웨어
레퍼런스 디자인

TIPD161 — 선형 아날로그 3와이어 PT100 RTD-2와이어 4~20mA 전류 루프 트랜스미터 레퍼런스 디자인

This design features a single-chip solution to linearize and transmit a 3-wire PT100 RTD over the industry standard 2-wire 4-20mA current loop.  The design was configured for a -200°C to 800°C  temperature range, but other temperature ranges can be achieved by adjusting the (...)

지원되는 제품 및 하드웨어
패키지 CAD 기호, 풋프린트 및 3D 모델
SOIC (D) 14 Ultra Librarian
PDIP (N) 14 Ultra Librarian

주문 및 품질

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상