首頁 電池管理 IC 電池充電器 IC
首頁
電池管理 IC
電池充電器 IC
最新

BQ24810

現行

具有混合動力升壓、電池升壓模式及 GaN 的 SMBus 1-4 芯降壓電池充電控制器

立即訂購
產品規格表

BQ24810

現行
產品規格表 立即訂購

產品詳細資料

Rating Catalog Number of series cells 1, 2, 3, 4 Cell chemistry Lead Acid, Li-Ion/Li-Polymer, Lithium Phosphate/LiFePO4, NiCd, NiMH Charge current (max) (A) 8.128 Features IC thermal regulation, Input OVP, Power Path, VINDPM (Input voltage threshold to maximize adaptor power) Vin (min) (V) 4.5 Vin (max) (V) 24 Absolute max Vin (max) (V) 30 Control topology Switch-Mode Buck Battery charge voltage (min) (V) 1.024 Battery charge voltage (max) (V) 19.2 Control interface SMBus Operating temperature range (°C) -40 to 85
Rating Catalog Number of series cells 1, 2, 3, 4 Cell chemistry Lead Acid, Li-Ion/Li-Polymer, Lithium Phosphate/LiFePO4, NiCd, NiMH Charge current (max) (A) 8.128 Features IC thermal regulation, Input OVP, Power Path, VINDPM (Input voltage threshold to maximize adaptor power) Vin (min) (V) 4.5 Vin (max) (V) 24 Absolute max Vin (max) (V) 30 Control topology Switch-Mode Buck Battery charge voltage (min) (V) 1.024 Battery charge voltage (max) (V) 19.2 Control interface SMBus Operating temperature range (°C) -40 to 85
WQFN (RUY) 28 16 mm² 4 x 4
  • Hybrid Power Boost Mode to power up system from adapter and battery together
    • Ultra-fast transient response of 100µs to enter Hybrid Power Boost Mode
    • Ultra-fast ICHG recovery within 60µs after exiting Hybrid Power Boost Mode
  • Battery Only Boost Mode to support larger system transients and extend battery run time
  • Peak power two-level input current limit to maximize the power from adapter and minimize battery discharge
  • Charge 1- to 4-cell battery pack from 4.5V to 24V adapter
  • High accuracy power and current monitoring for CPU throttling
    • Comprehensive PROCHOT profile
    • ± 2% Current monitor accuracy
    • ± 5% System Power Monitor Accuracy (PMON)
  • Automatic NMOS power source selection from adapter or battery
    • ACFET fast turn on in 100µs when exiting learn mode from battery removal
  • Programmable input current, charge voltage, charge and discharge current limit
    • ±0.4% Charge voltage (16mV/step)
    • ±2% Input current (64mA/step)
    • ±2% Charge current (64mA/step)
    • ±2% Discharge current (512mA/step)
  • High integration
    • Battery LEARN function
    • Battery present monitor
    • Boost Mode indicator
    • Loop compensation
    • BTST Diode
  • Enhanced safety features for overvoltage protection, overcurrent protection, battery, inductor, and MOSFET short-circuit protection
  • Switching frequency: 300kHz, 400kHz, 600kHz, and 800kHz
  • Realtime system control on ILIM pin to limit charge and discharge current
  • 0.65mA Adapter standby quiescent current for Energy Star
  • Input current limit (IINDPM) up to 21.12A/10.56A with 5mΩ/10mΩ sense resistor
  • VSYSMIN regulation up to 16.128V+2.3V during battery only boost mode
  • Hybrid Power Boost Mode to power up system from adapter and battery together
    • Ultra-fast transient response of 100µs to enter Hybrid Power Boost Mode
    • Ultra-fast ICHG recovery within 60µs after exiting Hybrid Power Boost Mode
  • Battery Only Boost Mode to support larger system transients and extend battery run time
  • Peak power two-level input current limit to maximize the power from adapter and minimize battery discharge
  • Charge 1- to 4-cell battery pack from 4.5V to 24V adapter
  • High accuracy power and current monitoring for CPU throttling
    • Comprehensive PROCHOT profile
    • ± 2% Current monitor accuracy
    • ± 5% System Power Monitor Accuracy (PMON)
  • Automatic NMOS power source selection from adapter or battery
    • ACFET fast turn on in 100µs when exiting learn mode from battery removal
  • Programmable input current, charge voltage, charge and discharge current limit
    • ±0.4% Charge voltage (16mV/step)
    • ±2% Input current (64mA/step)
    • ±2% Charge current (64mA/step)
    • ±2% Discharge current (512mA/step)
  • High integration
    • Battery LEARN function
    • Battery present monitor
    • Boost Mode indicator
    • Loop compensation
    • BTST Diode
  • Enhanced safety features for overvoltage protection, overcurrent protection, battery, inductor, and MOSFET short-circuit protection
  • Switching frequency: 300kHz, 400kHz, 600kHz, and 800kHz
  • Realtime system control on ILIM pin to limit charge and discharge current
  • 0.65mA Adapter standby quiescent current for Energy Star
  • Input current limit (IINDPM) up to 21.12A/10.56A with 5mΩ/10mΩ sense resistor
  • VSYSMIN regulation up to 16.128V+2.3V during battery only boost mode

The BQ24810 device is a high-efficiency, synchronous buck multi-chemistry battery charger supporting 1-, 2-, 3-, or 4-series Li+ cells, or other battery chemistries up to 19.2V.

Through SMBus, a host microcontroller programs charge current, charge voltage, input current limit and discharge current limit with high regulation accuracies. Additionally, the BQ24810 supports a two level input current limit (Peak Power mode) to fully utilize the adapter capabilities and reduce battery discharge. The BQ24810 provides adapter current (IADP), battery discharge current (IDCHG), and system power (PMON) signals to the host microcontroller and outputs the PROCHOT signal to throttle back CPU speed when needed.

The BQ24810 supports hybrid power boost mode to boost the battery voltage to supplement the adapter when system power demand is temporarily higher than the adapter is able to provide. When the adapter is not present, the BQ24810 supports battery only boost mode to boost the battery voltage above the minimum system operating voltage, providing more headroom to support system transients.

The BQ24810 device is a high-efficiency, synchronous buck multi-chemistry battery charger supporting 1-, 2-, 3-, or 4-series Li+ cells, or other battery chemistries up to 19.2V.

Through SMBus, a host microcontroller programs charge current, charge voltage, input current limit and discharge current limit with high regulation accuracies. Additionally, the BQ24810 supports a two level input current limit (Peak Power mode) to fully utilize the adapter capabilities and reduce battery discharge. The BQ24810 provides adapter current (IADP), battery discharge current (IDCHG), and system power (PMON) signals to the host microcontroller and outputs the PROCHOT signal to throttle back CPU speed when needed.

The BQ24810 supports hybrid power boost mode to boost the battery voltage to supplement the adapter when system power demand is temporarily higher than the adapter is able to provide. When the adapter is not present, the BQ24810 supports battery only boost mode to boost the battery voltage above the minimum system operating voltage, providing more headroom to support system transients.
filter 尋找其它 電池充電器 IC
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 3
類型 標題 日期
* Data sheet BQ24810 SMBus 1- to 4-Cell Buck Battery Charge Controller With Peak Power, Hybrid Power Boost and Battery Only Boost Modes datasheet PDF | HTML 2025年 8月 21日
Technical article Hot plugging DC/DC converters safely PDF | HTML 2025年 9月 2日
Certificate BQ24810 EU Declaration of Conformity (DoC) 2025年 8月 13日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

BQ24810EVM — BQ24810 評估模組

BQ24810 評估模組 (EVM) 是適用於 BQ24810 IC 的評估系統。BQ24810 IC 為僅降壓型電池充電控制器，具備混合電源升壓模式、僅電池升壓模式及處理器過熱監控功能。輸入電壓範圍介於 4.5V 和 24V 之間，可編程輸出為 1-4 芯充電電壓和 128mA 至 8.128A 充電電流。
使用指南: PDF | HTML
TI.com 無法提供
封裝 針腳 CAD 符號、佔位空間與 3D 模型
WQFN (RUY) 28 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片