產品詳細資料

Number of series cells 1 Charge current (max) (A) 8 Vin (max) (V) 12 Cell chemistry Li-Ion/Li-Polymer, Lithium Phosphate/LiFePO4 Battery charge voltage (min) (V) 3.5 Battery charge voltage (max) (V) 4.65 Absolute max Vin (max) (V) 20 Control topology Flash Charger Control interface I2C Features BAT temp thermistor monitoring (hot/cold profile), IC thermal regulation, Input OVP, Integrated ADC Vin (min) (V) 3.2 Rating Catalog Operating temperature range (°C) -40 to 85
Number of series cells 1 Charge current (max) (A) 8 Vin (max) (V) 12 Cell chemistry Li-Ion/Li-Polymer, Lithium Phosphate/LiFePO4 Battery charge voltage (min) (V) 3.5 Battery charge voltage (max) (V) 4.65 Absolute max Vin (max) (V) 20 Control topology Flash Charger Control interface I2C Features BAT temp thermistor monitoring (hot/cold profile), IC thermal regulation, Input OVP, Integrated ADC Vin (min) (V) 3.2 Rating Catalog Operating temperature range (°C) -40 to 85
DSBGA (YFF) 56 10.7999999999999988 mm² 3 x 3.5999999999999996
  • 97% Efficient power stage for 8-A fast charge
  • Patent pending switched cap charger architecture optimized for 50% duty cycle
    • Input voltage is 2x battery voltage (3.5 V to 4.65 V)
    • Output current is 2x of input current (up to
      4.5 A)
    • Reduces power loss across the cable
  • Integrated programmable protection features for safe operation
    • Input over-voltage protection (BUS_OVP)
    • Input over-current protection (BUS_OCP) with adjustable alarm
    • Input over-voltage with external OVP FET (VAC_OVP up to 17 V, BQ25970 only)
    • Battery over-voltage protection (BAT_OVP) with adjustable alarm
    • Output over-voltage (VOUT_OVP)
    • Input over-current protection (BUS_OCP) with adjustable alarm
    • IBAT over-current protection (BAT_OCP) with adjustable alarm
    • Switching MOSFET cycle by cycle current limit
    • Battery temperature monitoring
    • Connector Temperature Monitoring
  • Programmable settings for system optimization
    • Optional VBATREG and IBATREG regulation for system load and wall adapter transients (BQ25970 only with External OVP FET)
    • STAT, FLAG, and MASK options for interrupts
    • ADC Readings and configuration
  • Integrated 12-bit effective analog-to digital converter (ADC)
    • ±0.5% BUS Voltage
    • ±0.5% VOUT Voltage
    • –0.4% to 0.2% BAT Voltage with differential sensing
    • ±1.5% BAT Current at 6 A with external RSENSE
    • ±1% BAT Temperature
    • ±1% BUS Temperature
    • ±4°C Die temperature
  • 97% Efficient power stage for 8-A fast charge
  • Patent pending switched cap charger architecture optimized for 50% duty cycle
    • Input voltage is 2x battery voltage (3.5 V to 4.65 V)
    • Output current is 2x of input current (up to
      4.5 A)
    • Reduces power loss across the cable
  • Integrated programmable protection features for safe operation
    • Input over-voltage protection (BUS_OVP)
    • Input over-current protection (BUS_OCP) with adjustable alarm
    • Input over-voltage with external OVP FET (VAC_OVP up to 17 V, BQ25970 only)
    • Battery over-voltage protection (BAT_OVP) with adjustable alarm
    • Output over-voltage (VOUT_OVP)
    • Input over-current protection (BUS_OCP) with adjustable alarm
    • IBAT over-current protection (BAT_OCP) with adjustable alarm
    • Switching MOSFET cycle by cycle current limit
    • Battery temperature monitoring
    • Connector Temperature Monitoring
  • Programmable settings for system optimization
    • Optional VBATREG and IBATREG regulation for system load and wall adapter transients (BQ25970 only with External OVP FET)
    • STAT, FLAG, and MASK options for interrupts
    • ADC Readings and configuration
  • Integrated 12-bit effective analog-to digital converter (ADC)
    • ±0.5% BUS Voltage
    • ±0.5% VOUT Voltage
    • –0.4% to 0.2% BAT Voltage with differential sensing
    • ±1.5% BAT Current at 6 A with external RSENSE
    • ±1% BAT Temperature
    • ±1% BUS Temperature
    • ±4°C Die temperature

The BQ2597x is a 97% efficient, 8-A battery charging solution using a switched cap architecture. This architecture and the integrated FETs are optimized to enable a 50% duty cycle, allowing the cable current to be half the current delivered to the battery, reducing the losses over the charging cable as well as limiting the temperature rise in the application.

The dual-phase architecture reduces the input cap requirements as well as reducing the output voltage ripple. When used with a standard charger such as the BQ2589x, the system enables the fastest charging at the lowest power loss from pre-charge through CC, CV, and termination.

The device integrates all the necessary protection features to ensure safe charging, including input over-voltage and over-current protection, output over-voltage and over-current protection, temperature sensing for the battery and cable, and monitoring the die temperature.

The device includes a 12-bit effective analog-to-digital converter (ADC) to provide bus voltage, bus current, output voltage, battery voltage, battery current, bus temperature, bat temperature, die temperature, and other calculated measurements needed to manage the charging of the battery from the smart wall adapter or power bank.

The BQ2597x is a 97% efficient, 8-A battery charging solution using a switched cap architecture. This architecture and the integrated FETs are optimized to enable a 50% duty cycle, allowing the cable current to be half the current delivered to the battery, reducing the losses over the charging cable as well as limiting the temperature rise in the application.

The dual-phase architecture reduces the input cap requirements as well as reducing the output voltage ripple. When used with a standard charger such as the BQ2589x, the system enables the fastest charging at the lowest power loss from pre-charge through CC, CV, and termination.

The device integrates all the necessary protection features to ensure safe charging, including input over-voltage and over-current protection, output over-voltage and over-current protection, temperature sensing for the battery and cable, and monitoring the die temperature.

The device includes a 12-bit effective analog-to-digital converter (ADC) to provide bus voltage, bus current, output voltage, battery voltage, battery current, bus temperature, bat temperature, die temperature, and other calculated measurements needed to manage the charging of the battery from the smart wall adapter or power bank.

下載 觀看有字幕稿的影片 影片

更多資訊和樣品供貨情況

提供完整的產品規格表和其他資訊。立即索取

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 1
類型 標題 日期
* Data sheet BQ25970, BQ25971 I2C Controlled Single Cell High Efficiency 8-A Switched Cap Fast Chargers With ADC datasheet (Rev. B) PDF | HTML 2020年 4月 20日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

封裝 針腳 CAD 符號、佔位空間與 3D 模型
DSBGA (YFF) 56 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片