CC2652P7
Wireless microcontroller
- Powerful 48-MHz Arm® Cortex®-M4F processor
- 704KB flash program memory
- 256KB of ROM for protocols and library functions
- 8KB of cache SRAM
- 144KB of ultra-low leakage SRAM with parity for high-reliability operation
- Dynamic multiprotocol manager (DMM) driver
- Programmable radio includes support for 2-(G)FSK, 4-(G)FSK, MSK, Bluetooth® 5.2 Low Energy, IEEE 802.15.4 PHY and MAC
- Supports over-the-air upgrade (OTA)
Ultra-low power sensor controller
- Autonomous MCU with 4KB of SRAM
- Sample, store, and process sensor data
- Fast wake-up for low-power operation
- Software defined peripherals; capacitive touch, flow meter, LCD
Low power consumption
- MCU consumption:
- 3.10 mA active mode, CoreMark
- 65 µA/MHz running CoreMark
- 0.9 µA standby mode, RTC, 144KB RAM
- 0.1 µA shutdown mode, wake-up on pin
- Ultra low-power sensor controller
consumption:
- 29.2 µA in 2 MHz mode
- 799 µA in 24 MHz mode
- Radio Consumption:
- 6.4 mA RX
- 21 mA TX at +10 dBm
- 101 mA TX at +20 dBm
Wireless protocol support
- Thread, Zigbee®, Matter
- Bluetooth® 5.2 Low Energy
- SimpleLink™ TI 15.4-stack
- 6LoWPAN
- Proprietary systems
High performance radio
- -104 dBm for Bluetooth® Low Energy 125-kbps
- Output power up to +20 dBm with temperature compensation
Regulatory compliance
- Suitable for systems targeting compliance with these standards:
- ETSI EN 300 328, EN 300 440 Cat. 2 and 3
- FCC CFR47 Part 15
- ARIB STD-T66
MCU peripherals
- Digital peripherals can be routed to any GPIO
- Four 32-bit or eight 16-bit general-purpose timers
- 12-bit ADC, 200 kSamples/s, 8 channels
- 8-bit DAC
- Two comparators
- Programmable current source
- Two UART, two SSI, I2C, I2S
- Real-time clock (RTC)
- Integrated temperature and battery monitor
Security enablers
- AES 128- and 256-bit cryptographic accelerator
- ECC and RSA public key hardware accelerator
- SHA2 Accelerator (full suite up to SHA-512)
- True random number generator (TRNG)
Development tools and software
- LP-CC1352P7 Development Kits
- SimpleLink™ CC13xx and CC26xx Software Development Kit (SDK)
- SmartRF™ Studio for simple radio configuration
- Sensor Controller Studio for building low-power sensing applications
- SysConfig system configuration tool
Operating range
- On-chip buck DC/DC converter
- 1.8-V to 3.8-V single supply voltage
- -40 to +105°C
Package
- 7-mm × 7-mm RGZ VQFN48 (26 GPIOs)
- RoHS-compliant package
The SimpleLink™ CC2652P7 device is a multiprotocol 2.4-GHz wireless microcontroller (MCU) supporting Thread, Zigbee , Matter, Bluetooth 5.2 Low Energy, IEEE 802.15.4g, IPv6-enabled smart objects (6LoWPAN), TI 15.4-Stack (2.4 GHz), and concurrent multiprotocol through a Dynamic Multiprotocol Manager (DMM) driver. The CC2652P7 is based on an Arm® Cortex® M4F main processor and optimized for low-power wireless communication and advanced sensing in grid infrastructure, building automation, retail automation, personal electronics and medical applications.
The CC2652P7 has a software defined radio powered by an Arm® Cortex® M0, which allows support for multiple physical layers and RF standards. The device supports operation in the 2360 to 2500-MHz frequency band. PHY and frequency switching can be done runtime through a dynamic multiprotocol manager (DMM) driver. The CC2652P7 has an efficient built-in PA that supports +10 dBm TX at 21 mA and +20 dBM TX at 101 mA in 2.4-GHz band. CC2652P7 has a receive sensitivity of -104 dBm for 125-kbps Bluetooth® Low Energy Coded PHY.
The CC2652P7 has a low sleep current of 0.9 µA with RTC and 144KB RAM retention. In addition to the main Cortex® M4F processor, the device also has an autonomous ultra-low power Sensor Controller CPU with fast wake-up capability. As an example, the sensor controller is capable of 1-Hz ADC sampling at 1-µA system current.
The CC2652P7 has Low SER (Soft Error Rate) FIT (Failure-in-time) for long operational lifetime. Always-on SRAM parity minimizes risk for corruption due to potential radiation events. Consistent with many customers’ 10 to 15 years or longer life cycle requirements, TI has a product life cycle policy with a commitment to product longevity and continuity of supply.
The CC2652P7 device is part of the SimpleLink™ MCU platform, which consists of Wi-Fi®, Bluetooth® Low Energy, Thread, Zigbee, Wi-SUN®, Amazon Sidewalk, mioty®, Sub-1 GHz MCUs, and host MCUs. CC2652P7 is part of a scalable portfolio with flash sizes from 32KB to 704KB with pin-to-pin compatible package options. The common SimpleLink™CC13xx and CC26xx Software Development Kit (SDK) and SysConfig system configuration tool supports migration between devices in the portfolio. A comprehensive number of software stacks, application examples and SimpleLink™ Academy training sessions are included in the SDK. For more information, visit wireless connectivity.
技術文件
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
LP-CC1352P7 — 適用 SimpleLink™ 多頻帶無線 MCU 的 CC1352P7 LaunchPad™ 開發套件
此 LaunchPad™ 開發套件配備整合式功率放大器與多頻帶無線電支援，可同時進行 Sub-1GHz 與 2.4-GHz 操作，並加快裝置上的開發速度。支援的通訊協定包括 Bluetooth® 低耗能、Sub-1 GHz、Thread、Zigbee®、802.15.4 和搭載相容 CC13xx-CC26xx SDK 的專利 RF。提供具不同 RF 配對網路與功率等級的變化。
- LP-CC1352P7-1：868/915 MHz 高達 20 dBm、2.4 GHz 高達 5 dBm
- LP-CC1352P7-4：433 MHz 高達 13 dBm、2.4 GHz 高達 10 dBm
ALGO-3P-UISP1-TI — 適用於德州儀器裝置的 Algocraft μISP1 編程器
μISP 可以連接到主機 PC (內建 RS-232、USB、LAN 連接) 或獨立模式工作。
在單機模式下，只要按下「開始」按鈕或透過一些 TTL 控制線，就可以執行編程週期。
其緊湊的尺寸和多功能性可輕鬆整合到生產環境、手動和自動化程序中。
AMZN-3P-SIDEWALK-TOOLKIT — Amazon Sidewalk 開發工具套件
Amazon Sidewalk 是能夠涵蓋居家內部、建物內部、整個鄰近區域，甚至整個城市使用案例的安全可靠社區網路，運用相容 Amazon Echo 與 Ring 裝置等 Amazon Sidewalk 橋接器，為 IoT 裝置提供雲端連線能力。Amazon Sidewalk 採用適合短距離通訊的 Bluetooth® 低耗能技術，以及適合長距離通訊的 Sub-1 GHz 915 MHz 頻率，在家中和外面都能實現低頻寬與長距離連線。Amazon Sidewalk 運用數百萬參與的 Sidewalk (...)
RFSTAR-3P-CC2652-MODULES — 以 CC2652R CC2652R7 CC2652P CC2652P7 為基礎的 RFSTAR 多協定無線模組
RF-star 超過十年來均是 TI 的無線連線模組第三方 IDH，專門供應以 TI 產品為基礎的各種無線模組及解決方案，例如 BLE、Matter、ZigBee、Thread、Wi-Fi、Sub-1G 與 Wi-SUN。
RF-BM-2652B1 無線模組是以 CC2652R 為基礎、RF-BM-2652B2 是以 CC2652R7 為基礎、RF-BM-2652P2(I) 系列是以 CC2652P為基礎，而 RF-BM-2652P4(I) 則是以 CC2652P7 為基礎，這些 SimpleLink 多協定 2.4 GHz 無線模組均支援 Matter (僅限 (...)
LB-3P-TRACE32-WIRELESS — 適用於無線連線的 Lauterbach TRACE32® 偵錯系統
Lauterbach 的 TRACE32® 工具是一套先進的軟硬體元件，可讓開發人員分析、最佳化及認證 TI 許多無線連線晶片。全球知名的嵌入式系統偵錯解決方案是完美的解決方案，適用於從早期的矽前 (pre-silicon) 開發，到產品認證和現場故障排除等所有開發階段： 完整的晶片內建斷點支援；執行階段記憶體存取；快閃記憶體編程和基準計數器。所有內容都是可編寫指令碼，使開發人員能夠一再地重複相同的測試順序。Lauterbach 工具的直覺模組化設計為工程師提供現今最高的可用性能，以及可隨需求變化而調整和成長的系統。經認證的工具資格認證支援套件 (TQSK) 提供便利的全方位方式，鑒定 (...)
ALGO-3P-WRITENOW — Algocraft WriteNow！程式設計工具
WriteNow! 系統內編程器系列是可編程產業的一大突破。此編程器支援多家製造商的眾多裝置 (例如微控制器、記憶體、CPLD 與其他可編程裝置)。其尺寸精巧，便於整合至 ATE 與固定裝置。編程器可單機運作，或透過內建的 RS-232、LAN 與 USB 連接埠與主機電腦連線，並隨附操作簡易的工具軟體。
SIMPLELINK-LOWPOWER-F2-SDK — SimpleLink™ Low Power F2 software development kit (SDK) for the CC13x1, CC13x2, CC13x4, CC26x1, CC26x2 and CC26x4 devices
SimpleLink™ 低功率 SDK 支援 CC13xx、CC23xx、CC26xx 及 CC27xx 產品系列。這些 SDK 搭配可提供適合開發 Sub-1 GHz 與 2.4 GHz 應用的全方位軟體套件，包括在 SimpleLink CC13xx、CC23xx、CC26xx 和 CC27xx 無線 MCU 上支援 Bluetooth® 低功耗、網狀網路、Zigbee®、Matter、Thread、802.15.4 型、專有與多協定解決方案。
SIMPLELINK-TI-OPENTHREAD-SDK — SimpleLink™ family of devices OpenThread software
ARM-CGT — ARM Code Generation Tools - Compiler
The TI Arm® compiler tools are an essential component of the CCStudio™ development ecosystem, providing robust support for TI Arm-based platforms. They are engineered to maximize the potential of TI Arm Cortex®-M and Cortex-R series devices.
The current tools ARM-CGT-CLANG are derived from the (...)
ARM-CGT-CLANG — Arm® code generation tools - compiler
The TI Arm® compiler tools are an essential component of the CCStudio™ development ecosystem, providing robust support for TI Arm-based platforms. They are engineered to maximize the potential of TI Arm Cortex®-M and Cortex-R series devices.
The current tools ARM-CGT-CLANG are derived from the (...)
CCSTUDIO — Code Composer Studio™ integrated development environment (IDE)
CCStudio™ IDE is part of TI's extensive CCStudio™ development ecosystem and is an integrated development environment for TI's microcontrollers, processors, wireless connectivity devices, and radar sensors. CCStudio IDE is available as desktop or cloud-based applications. The cloud version (...)
CCSTUDIO-OPENOCD — OpenOCD Binary Releases
SENSOR-CONTROLLER-STUDIO — Sensor Controller Studio
Sensor Controller Studio is used to write, test and debug code for the CC26xx/CC13xx Sensor Controller, enabling ultra-low power application design. The tool generates an interface driver consisting of C source files with the firmware image, associated definitions, and generic functions that allow (...)
SYSCONFIG — Standalone desktop version of SysConfig
CCStudio™ SysConfig is part of TI's extensive CCStudio™ development ecosystem and is a configuration tool that simplifies hardware and software configuration challenges to accelerate software development.
SysConfig provides an intuitive graphical user interface for configuring pins, peripherals, (...)
SIMPLELINK-ACADEMY-CC13XX-CC26XX — SimpleLink™ CC13xx and CC26xx Academy
TI-DEVELOPER-ZONE — Start embedded development on your desktop or in the cloud
SMARTRF-STUDIO-7 — SmartRF Studio
SmartRF™ Studio 是一款 Windows 應用程式，功用在於協助射頻系統的設計人員在為所有 TI CC1xxx 及 CC2xxx 低功耗射頻裝置設計過程中，能在早期階段輕鬆評估無線電。此程式簡化了配置暫存器值和命令的產生，以及射頻系統的實際測試和除錯。
SmartRF Studio 支援下列 TI 裝置：
資源
SIMPLELINK-2-4GHZ-DESIGN-REVIEW — Hardware Design Review Request Form for SimpleLink™ CC2xxx Devices
SimpleLink 硬體設計審核流程提供一對一接觸的方式，並由主題內容專家協助審查您的設計，提供您寶貴的意見。一個簡單的三步驟流程用於請求審查，以及相關技術文件和資源的連結，可在此處找到。
入門指南
一般設計問題應張貼在我們的 E2E 討論區中，然後才能要求 2.4 GHz 硬體設計審查。
請確實備妥下列必要文件，隨硬體設計審查申請表一起傳送：
- 確認產品頁上提供的所有硬體文件均已經過審查，例如產品規格表、設計指南、使用指南和其他硬體資源
- 電路圖的可攜式文件格式 (PDF) 版本可供檢閱
- 物料清單 (BOM) 可供檢閱
- 堆疊詳細資料可供檢閱
- 電路板設計的 Gerber 檔案 (含零件位置和參考指示項) (...)
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| VQFN (RGZ) | 48 | Ultra Librarian |
訂購與品質
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。