產品詳細資料

Number of full bridges 1/2 Vs (min) (V) 5.5 Vs ABS (max) (V) 47 Sleep current (µA) 14 Control mode Independent 1/2-Bridge, PWM Control interface Hardware (GPIO) Features Current Regulation, Current sense Amplifier, Smart Gate Drive Topology External FET Rating Automotive Operating temperature range (°C) -40 to 125
Number of full bridges 1/2 Vs (min) (V) 5.5 Vs ABS (max) (V) 47 Sleep current (µA) 14 Control mode Independent 1/2-Bridge, PWM Control interface Hardware (GPIO) Features Current Regulation, Current sense Amplifier, Smart Gate Drive Topology External FET Rating Automotive Operating temperature range (°C) -40 to 125
VQFN (RHB) 32 25 mm² (5 mm × 5 mm)
  • AEC-Q100 Qualified for Automotive Applications
    • Device Temperature Grade 1: –40°C to +125°C Ambient Operating Temperature
  • Single Half-Bridge Gate Driver
    • Drives Two External N-Channel MOSFETs
    • Supports 100% PWM Duty Cycle
  • 5.5 to 45-V Operating Supply-Voltage Range
  • PWM Control Interface
  • Serial Interface for Configuration (DRV8703D-Q1)
  • Smart Gate Drive Architecture
    • Adjustable Slew-Rate Control
  • Supports 1.8-V, 3.3-V, and 5-V logic inputs
  • Current-Shunt Amplifier
  • Integrated PWM Current Regulation
  • Low-Power Sleep Mode
  • Protection Features
    • Supply Undervoltage Lockout (UVLO)
    • Charge-Pump Undervoltage (CPUV) Lockout
    • Overcurrent Protection (OCP)
    • Gate-Driver Fault (GDF)
    • Thermal Shutdown (TSD)
    • Watchdog Timer (DRV8703D-Q1)
    • Fault-Condition Output (nFAULT)
  • AEC-Q100 Qualified for Automotive Applications
    • Device Temperature Grade 1: –40°C to +125°C Ambient Operating Temperature
  • Single Half-Bridge Gate Driver
    • Drives Two External N-Channel MOSFETs
    • Supports 100% PWM Duty Cycle
  • 5.5 to 45-V Operating Supply-Voltage Range
  • PWM Control Interface
  • Serial Interface for Configuration (DRV8703D-Q1)
  • Smart Gate Drive Architecture
    • Adjustable Slew-Rate Control
  • Supports 1.8-V, 3.3-V, and 5-V logic inputs
  • Current-Shunt Amplifier
  • Integrated PWM Current Regulation
  • Low-Power Sleep Mode
  • Protection Features
    • Supply Undervoltage Lockout (UVLO)
    • Charge-Pump Undervoltage (CPUV) Lockout
    • Overcurrent Protection (OCP)
    • Gate-Driver Fault (GDF)
    • Thermal Shutdown (TSD)
    • Watchdog Timer (DRV8703D-Q1)
    • Fault-Condition Output (nFAULT)

The DRV870xD-Q1 devices are small half bridge gate drivers that use two external N-channel MOSFETs targeted to drive unidirectional brushed-DC motors or solenoid loads.

A PWM interface allows simple interfacing to controller circuits. An internal sense amplifier provides adjustable current control. Integrated Charge-Pump allows for 100% duty cycle support and can be used to drive external reverse battery switch. Independent Half Bridge mode allows sharing of half bridges to control multiple DC motors sequentially in a cost-efficient way. The gate driver includes circuitry to regulate the winding current using fixed off-time PWM current chopping.

The DRV870xD-Q1 devices include Smart Gate Drive technology to remove the need for any external gate components (resistors and Zener diodes) while protecting the external FETs. The Smart Gate Drive architecture optimizes dead time to avoid any shoot-through conditions, provides flexibility in reducing electromagnetic interference (EMI) with programmable slew-rate control and protects against any gate-short conditions. Additionally, active and passive pulldowns are included to prevent any dv/dt gate turn on.

The DRV870xD-Q1 devices are small half bridge gate drivers that use two external N-channel MOSFETs targeted to drive unidirectional brushed-DC motors or solenoid loads.

A PWM interface allows simple interfacing to controller circuits. An internal sense amplifier provides adjustable current control. Integrated Charge-Pump allows for 100% duty cycle support and can be used to drive external reverse battery switch. Independent Half Bridge mode allows sharing of half bridges to control multiple DC motors sequentially in a cost-efficient way. The gate driver includes circuitry to regulate the winding current using fixed off-time PWM current chopping.

The DRV870xD-Q1 devices include Smart Gate Drive technology to remove the need for any external gate components (resistors and Zener diodes) while protecting the external FETs. The Smart Gate Drive architecture optimizes dead time to avoid any shoot-through conditions, provides flexibility in reducing electromagnetic interference (EMI) with programmable slew-rate control and protects against any gate-short conditions. Additionally, active and passive pulldowns are included to prevent any dv/dt gate turn on.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相同,但針腳輸出與所比較的裝置不同。
DRV8106-Q1 現行 具有離線診斷功能和內嵌電流感測放大器的車用 40V、半橋智慧閘極驅動器 Improved diagnostics, lower sleep current and inline current sense amplifier

技術文件

找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 10
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 DRV870xD-Q1 Automotive Half-Bridge Gate Driver datasheet (Rev. B) PDF | HTML 2018/9/20
應用說明 Using DRV to Drive Solenoids (Rev. A) PDF | HTML 2022/4/24
應用說明 Best Practices for Board Layout of Motor Drivers (Rev. B) PDF | HTML 2021/10/14
應用說明 Understanding Smart Gate Drive (Rev. D) 2021/3/1
應用說明 Methods to Configure Current Regulation for Brushed and Stepper Motors (Rev. B) PDF | HTML 2021/1/19
應用說明 Detecting Short to Battery and Ground Conditions with TI Motor Gate Drivers PDF | HTML 2020/5/29
白皮書 Smart Gate Drive 2019/7/2
應用說明 Protecting Automotive Motor Drive Systems from Reverse Polarity Conditions (Rev. A) 2019/2/19
應用說明 Cut-Off Switch in High-Current Motor-Drive Applications (Rev. A) 2018/8/20
應用說明 Relay Replacement for Brushed DC Motor Drive in Automotive Applications 2016/11/14

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

DRV8702D-Q1EVM — DRV8702D-Q1 車用半橋有刷 DC 馬達閘極驅動器評估模組

DRV8702D-Q1EVM(評估模組)是一款評估套件,可用於展示 TI 的 DRV8702D-Q1 半橋閘極驅動器。此系統透過 MSP430G2553 控制馬達的占空比與轉動方向,並監測 DRV8702D-Q1 回報的電流資訊。此功率級採用 DRV8702D-Q1 車用 H 橋閘極驅動器與 CSD18540Q5B N 通道 NexFET 功率 MOSFET 架構而成。本 EVM具備高性能、完整保護機制與高成本效益,能協助縮短開發時程並加速產品上市。本 EVM 搭配操作簡便的應用程式,只需極少的外部設備即可快速啟動。
使用指南: PDF
支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
參考設計

TIDA-01530 — 汽車擋風玻璃雨刷驅動參考設計

此參考設計驅動兩速前擋風玻璃雨刷器,一個或兩個後雨刷器,以及向汽車前後擋風玻璃噴霧的幫浦。除了控制雨刷與幫浦的有刷馬達外,此設計還包括雨刷停車訊號的輸入,以及診斷與保護功能。測試資料展示採用傳統汽車雨刷器機制的設計性能,而完整的設計檔案可加快汽車設計人員的新專案開發速度。
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN (RHB) 32 Ultra Librarian

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片