TLV2374-Q1

現行

車規、四路、16-V、3-MHz、RRIO 運算放大器

立即訂購

產品規格表

document-pdfAcrobat TLV237x-Q1 550-µA/Channel, 3-MHz Rail-to-Rail Input and Output Operational Amplifiers datasheet (Rev. B) (英文) PDF | HTML

現在提供此產品的更新版本

open-in-new

比較替代產品

具備升級功能，可直接投入使用替代所比較的裝置。

TLV9154-Q1

現行

汽車級、四路、16V、4.5MHz、低功率運算放大器 Higher GBW (4.5 MHz), faster slew rate (21 V/us), lower offset voltage (0.895 mV), lower noise (10.8 nV/√Hz), higher output current (75 mA)

TLV2374-Q1

現行

產品規格表

立即訂購

產品詳細資料

Number of channels

4

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

16

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

2.7

Rail-to-rail

In, Out

GBW (typ) (MHz)

3

Slew rate (typ) (V/µs)

2.4

Vos (offset voltage at 25°C) (max) (mV)

4.5

Iq per channel (typ) (mA)

0.55

Vn at 1 kHz (typ) (nV√Hz)

39

Rating

Automotive

Operating temperature range (°C)

-40 to 125

Offset drift (typ) (µV/°C)

2

Input bias current (max) (pA)

60

CMRR (typ) (dB)

72

Iout (typ) (A)

0.007

Architecture

CMOS

Input common mode headroom (to negative supply) (typ) (V)

0

Input common mode headroom (to positive supply) (typ) (V)

0

Output swing headroom (to negative supply) (typ) (V)

0.05

Output swing headroom (to positive supply) (typ) (V)

-0.07

Number of channels

4

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

16

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

2.7

Rail-to-rail

In, Out

GBW (typ) (MHz)

3

Slew rate (typ) (V/µs)

2.4

Vos (offset voltage at 25°C) (max) (mV)

4.5

Iq per channel (typ) (mA)

0.55

Vn at 1 kHz (typ) (nV√Hz)

39

Rating

Automotive

Operating temperature range (°C)

-40 to 125

Offset drift (typ) (µV/°C)

2

Input bias current (max) (pA)

60

CMRR (typ) (dB)

72

Iout (typ) (A)

0.007

Architecture

CMOS

Input common mode headroom (to negative supply) (typ) (V)

0

Input common mode headroom (to positive supply) (typ) (V)

0

Output swing headroom (to negative supply) (typ) (V)

0.05

Output swing headroom (to positive supply) (typ) (V)

-0.07

TSSOP (PW)

14

32 mm² (5 mm × 6.4 mm)

SOIC (D)

14

51.9 mm² (8.65 mm × 6 mm)

Qualified for Automotive Applications
AEC-Q100 Qualified With the Following Results:
- Device Temperature Grade 1: –40°C to 125°C Ambient Operating Temperature Range
- Device HBM ESD Classification Level 2
- Device CDM ESD Classification Level C4B
Rail-to-Rail Input and Output
Wide Bandwidth: 3 MHz
High Slew Rate: 2.4 V/µs
Supply Voltage Range: 2.7 V to 16 V
Supply Current: 550 µA/Channel
Input Noise Voltage: 39 nV/√Hz
Input Bias Current: 1 pA
Ultra-Small Packaging:
- 5-Pin SOT-23 (TLV2371-Q1)

Qualified for Automotive Applications
AEC-Q100 Qualified With the Following Results:
- Device Temperature Grade 1: –40°C to 125°C Ambient Operating Temperature Range
- Device HBM ESD Classification Level 2
- Device CDM ESD Classification Level C4B
Rail-to-Rail Input and Output
Wide Bandwidth: 3 MHz
High Slew Rate: 2.4 V/µs
Supply Voltage Range: 2.7 V to 16 V
Supply Current: 550 µA/Channel
Input Noise Voltage: 39 nV/√Hz
Input Bias Current: 1 pA
Ultra-Small Packaging:
- 5-Pin SOT-23 (TLV2371-Q1)

The TLV237x-Q1 devices are single-supply operational amplifiers providing rail-to-rail input and output capability. The TLV237x-Q1 takes the minimum operating supply voltage down to 2.7 V and up to 16 V over the extended automotive temperature range. Therefore, the wide voltage range can support both start-stop functionality and a connection directly to the typical 12-V battery. The rail-to-rail capabilities allow the device to maximize the output signal and avoid clipping.

The CMOS inputs enable high-impedance suitable for engine control units (ECU), body control modules (BCM), battery management systems (BMS), and HEV/EV inverters. This also allows the user to draw a lower offset voltage and maintain low power consumption to help meet overall system needs for quiescent current such as in infotainment or cluster, HEV/EV, and powertrain.

Additionally, the TLV237x-Q1 family supports a high common-mode rail to the supply voltage. This feature sets no gain limitations and can support the input at any level without the concern for any phase reversal.

The TLV237x-Q1 devices are single-supply operational amplifiers providing rail-to-rail input and output capability. The TLV237x-Q1 takes the minimum operating supply voltage down to 2.7 V and up to 16 V over the extended automotive temperature range. Therefore, the wide voltage range can support both start-stop functionality and a connection directly to the typical 12-V battery. The rail-to-rail capabilities allow the device to maximize the output signal and avoid clipping.

The CMOS inputs enable high-impedance suitable for engine control units (ECU), body control modules (BCM), battery management systems (BMS), and HEV/EV inverters. This also allows the user to draw a lower offset voltage and maintain low power consumption to help meet overall system needs for quiescent current such as in infotainment or cluster, HEV/EV, and powertrain.

Additionally, the TLV237x-Q1 family supports a high common-mode rail to the supply voltage. This feature sets no gain limitations and can support the input at any level without the concern for any phase reversal.

filter

尋找其它一般用途運算放大器

下載觀看有字幕稿的影片影片

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。

檢視所有 2

重要文件	類型	標題	格式選項	下載最新的英文版本		日期
*	資料表	TLV237x-Q1 550-µA/Channel, 3-MHz Rail-to-Rail Input and Output Operational Amplifiers datasheet (Rev. B)	PDF \| HTML			2016/12/23
	電子書	The Signal e-book: A compendium of blog posts on op amp design topics	PDF \| HTML			2017/3/28