首頁 微控制器 (MCU) 與處理器 Microcontrollers Real-time digital power MCUs
首頁
微控制器 (MCU) 與處理器
Microcontrollers
Real-time digital power MCUs

TMS320F2800135

現行

具有 120 MHz、128-KB 快閃記憶體、FPU 與 TMU 的 C2000™ 32 位元 MCU

立即訂購
產品規格表
使用指南
勘誤表

TMS320F2800135

現行
產品規格表 立即訂購

產品詳細資料

CPU 1 C28 Frequency (MHz) 120 Flash memory (kByte) 128 RAM (kByte) 36 ADC type 2 12-bit SAR Total processing (MIPS) 120 Features 32-bit CPU timers, Dual security zones, FPU32, Watchdog timer UART 3 CAN (#) 1 PWM (Ch) 14 Number of ADC channels 11, 17, 21 SPI 1 QEP 1 USB No Hardware accelerators Trigonometric math accelerator Edge AI enabled Edge AI Studio enabled Operating temperature range (°C) -40 to 125 Rating Catalog Communication interface CAN, I2C, SCI, SPI Operating system FreeRTOS Nonvolatile memory (kByte) 128 Number of GPIOs 38 Number of I2Cs 2 Security Secure storage
CPU 1 C28 Frequency (MHz) 120 Flash memory (kByte) 128 RAM (kByte) 36 ADC type 2 12-bit SAR Total processing (MIPS) 120 Features 32-bit CPU timers, Dual security zones, FPU32, Watchdog timer UART 3 CAN (#) 1 PWM (Ch) 14 Number of ADC channels 11, 17, 21 SPI 1 QEP 1 USB No Hardware accelerators Trigonometric math accelerator Edge AI enabled Edge AI Studio enabled Operating temperature range (°C) -40 to 125 Rating Catalog Communication interface CAN, I2C, SCI, SPI Operating system FreeRTOS Nonvolatile memory (kByte) 128 Number of GPIOs 38 Number of I2Cs 2 Security Secure storage
LQFP (PM) 64 144 mm² 12 x 12 LQFP (PT) 48 81 mm² 9 x 9 VQFN (RGZ) 48 49 mm² 7 x 7 VQFN (RHB) 32 25 mm² 5 x 5
  • Real-time processing
  • On-chip memory
    • 256KB (128KW) of single bank flash (ECC-protected)
    • 36KB (18KW) of RAM (ECC/Parity-protected)
    • Security
      • JTAGLOCK
      • Zero-pin boot
      • Dual-zone security
  • Clock and system control
    • Two internal 10-MHz oscillators
    • External resistor support for improved internal oscillator performance (ExtR)
    • Crystal oscillator or external clock input
    • Windowed watchdog timer module
    • Missing clock detection circuitry
    • Dual-clock Comparator (DCC)
  • 3.3-V I/O design
    • Internal VREG generation
    • Brownout reset (BOR) circuit
  • System peripherals
    • 38 individually programmable multiplexed General-Purpose Input/Output (GPIO) pins (11 shared with Analog)
    • 10 digital inputs on analog pins
    • Enhanced Peripheral Interrupt Expansion (ePIE)
    • Multiple low-power mode (LPM) support
    • Unique Identification (UID) number
  • Communications peripherals
    • Two Inter-integrated Circuit (I2C) interfaces
    • One Controller Area Network (CAN/DCAN) bus port
    • One Serial Peripheral Interface (SPI) port
    • Three UART-compatible Serial Communication Interface (SCI)
  • Analog system
    • Two 4-MSPS, 12-bit Analog-to-Digital Converters (ADCs)
      • Up to 21 external channels (11 shared with GPIO)
      • Four integrated Post-Processing Blocks (PPB) per ADC
    • One windowed comparator (CMPSS) with 12-bit reference Digital-to-Analog Converters (DACs)
      • Digital glitch filters
      • COMPDACOUT (11-bit)
    • Three windowed comparators (CMPSS_LITE) with 9.5-bit effective reference DACs
      • Digital glitch filters
  • Enhanced control peripherals
    • 14 ePWM channels with two channels that have high-resolution capability (150-ps resolution)
      • Integrated dead-band support
      • Integrated hardware trip zones (TZs)
    • Two Enhanced Capture (eCAP) modules
    • One Enhanced Quadrature Encoder Pulse (eQEP) module with support for CW/CCW operation modes
    • Embedded Pattern Generator (EPG)
  • CMAC Keys (128-bits) for SW AES
  • Package options:
    • 64-pin Low-profile Quad Flatpack (LQFP) [PM suffix]
    • 48-pin LQFP [PT suffix]
    • 48-pin Very Thin Quad Flatpack No Lead (VQFN) [RGZ suffix]
    • 32-pin VQFN [RHB suffix]
  • Temperature options:
    • Ambient (T A): –40°C to 125°C
  • Real-time processing
  • On-chip memory
    • 256KB (128KW) of single bank flash (ECC-protected)
    • 36KB (18KW) of RAM (ECC/Parity-protected)
    • Security
      • JTAGLOCK
      • Zero-pin boot
      • Dual-zone security
  • Clock and system control
    • Two internal 10-MHz oscillators
    • External resistor support for improved internal oscillator performance (ExtR)
    • Crystal oscillator or external clock input
    • Windowed watchdog timer module
    • Missing clock detection circuitry
    • Dual-clock Comparator (DCC)
  • 3.3-V I/O design
    • Internal VREG generation
    • Brownout reset (BOR) circuit
  • System peripherals
    • 38 individually programmable multiplexed General-Purpose Input/Output (GPIO) pins (11 shared with Analog)
    • 10 digital inputs on analog pins
    • Enhanced Peripheral Interrupt Expansion (ePIE)
    • Multiple low-power mode (LPM) support
    • Unique Identification (UID) number
  • Communications peripherals
    • Two Inter-integrated Circuit (I2C) interfaces
    • One Controller Area Network (CAN/DCAN) bus port
    • One Serial Peripheral Interface (SPI) port
    • Three UART-compatible Serial Communication Interface (SCI)
  • Analog system
    • Two 4-MSPS, 12-bit Analog-to-Digital Converters (ADCs)
      • Up to 21 external channels (11 shared with GPIO)
      • Four integrated Post-Processing Blocks (PPB) per ADC
    • One windowed comparator (CMPSS) with 12-bit reference Digital-to-Analog Converters (DACs)
      • Digital glitch filters
      • COMPDACOUT (11-bit)
    • Three windowed comparators (CMPSS_LITE) with 9.5-bit effective reference DACs
      • Digital glitch filters
  • Enhanced control peripherals
    • 14 ePWM channels with two channels that have high-resolution capability (150-ps resolution)
      • Integrated dead-band support
      • Integrated hardware trip zones (TZs)
    • Two Enhanced Capture (eCAP) modules
    • One Enhanced Quadrature Encoder Pulse (eQEP) module with support for CW/CCW operation modes
    • Embedded Pattern Generator (EPG)
  • CMAC Keys (128-bits) for SW AES
  • Package options:
    • 64-pin Low-profile Quad Flatpack (LQFP) [PM suffix]
    • 48-pin LQFP [PT suffix]
    • 48-pin Very Thin Quad Flatpack No Lead (VQFN) [RGZ suffix]
    • 32-pin VQFN [RHB suffix]
  • Temperature options:
    • Ambient (T A): –40°C to 125°C

The TMS320F280013x (F280013x) is a member of the C2000™ real-time microcontroller family of scalable, ultra-low latency devices designed for efficiency in power electronics.

The real-time control subsystem is based on TI’s 32-bit C28x DSP core, which provides 120 MHz of signal-processing performance for floating- or fixed-point code running from either on-chip flash or SRAM. The C28x CPU is further boosted by the Trigonometric Math Unit (TMU), speeding up common algorithms key to real-time control systems.

The F280013x supports up to 256KB (128KW) of flash memory. Up to 36KB (18KW) of on-chip SRAM is also available to supplement the flash memory.

High-performance analog blocks are integrated into the F280013x real-time microcontroller (MCU) and are closely coupled with the processing and PWM units to provide optimal real-time signal chain performance. Fourteen PWM channels enable control of various power stages from a 3-phase inverter to power-factor correction and other advanced multilevel power topologies.

Interfacing is supported through various industry-standard communication ports (such as SPI, SCI, I2C, and CAN) and offers multiple pin-muxing options for optimal signal placement.

Want to learn more about features that make C2000 MCUs the right choice for your real-time control system? Check out The Essential Guide for Developing With C2000™ Real-Time Microcontrollers and visit the C2000™ real-time control MCUs page.

The Getting Started With C2000™ Real-Time Control Microcontrollers (MCUs) Getting Started Guide covers all aspects of development with C2000 devices from hardware to support resources. In addition to key reference documents, each section provides relevant links and resources to further expand on the information covered.

Ready to get started? Check out the TMDSCNCD2800137 evaluation board and download C2000Ware.

The TMS320F280013x (F280013x) is a member of the C2000™ real-time microcontroller family of scalable, ultra-low latency devices designed for efficiency in power electronics.

The real-time control subsystem is based on TI’s 32-bit C28x DSP core, which provides 120 MHz of signal-processing performance for floating- or fixed-point code running from either on-chip flash or SRAM. The C28x CPU is further boosted by the Trigonometric Math Unit (TMU), speeding up common algorithms key to real-time control systems.

The F280013x supports up to 256KB (128KW) of flash memory. Up to 36KB (18KW) of on-chip SRAM is also available to supplement the flash memory.

High-performance analog blocks are integrated into the F280013x real-time microcontroller (MCU) and are closely coupled with the processing and PWM units to provide optimal real-time signal chain performance. Fourteen PWM channels enable control of various power stages from a 3-phase inverter to power-factor correction and other advanced multilevel power topologies.

Interfacing is supported through various industry-standard communication ports (such as SPI, SCI, I2C, and CAN) and offers multiple pin-muxing options for optimal signal placement.

Want to learn more about features that make C2000 MCUs the right choice for your real-time control system? Check out The Essential Guide for Developing With C2000™ Real-Time Microcontrollers and visit the C2000™ real-time control MCUs page.

The Getting Started With C2000™ Real-Time Control Microcontrollers (MCUs) Getting Started Guide covers all aspects of development with C2000 devices from hardware to support resources. In addition to key reference documents, each section provides relevant links and resources to further expand on the information covered.

Ready to get started? Check out the TMDSCNCD2800137 evaluation board and download C2000Ware.

filter 尋找其它 Real-time digital power MCUs
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 56
重要文件 類型 標題 格式選項 日期
* Data sheet TMS320F280013x Real-Time Microcontrollers datasheet (Rev. B) PDF | HTML 2023年 11月 2日
* Errata TMS320F280013x Real-Time MCUs Silicon Errata (Rev. E) PDF | HTML 2025年 7月 28日
* User guide TMS320F280013x Real-Time Microcontrollers Technical Reference Manual (Rev. B) PDF | HTML 2024年 4月 2日
User guide Migration Between TMS320F280015x, TMS320F280013x, and F28E12x Guide PDF | HTML 2025年 8月 6日
Application note MCU Control Center Tool Developer's Guide PDF | HTML 2025年 8月 4日
Application note MCU Signal Sight Tool Developer's Guide PDF | HTML 2025年 8月 1日
User guide C2000 Real-Time Control Peripheral Reference Guide (Rev. U) PDF | HTML 2025年 7月 11日
Application note C2000-IDE Assist Tool Migration Feature Guide PDF | HTML 2025年 4月 23日
Product overview Industrial Functional Safety for C2000™ Real-Time Microcontrollers (Rev. F) 2025年 4月 23日
User guide Getting Started with Bootloading on C2000™ Microcontrollers PDF | HTML 2025年 4月 8日
Functional safety information VDE Safety Certification Document for F280013x, F280015x, F28002x, F28004x, F2838x, F28003x, F28P65x, F28P55x 2025年 3月 19日
Application brief How to Debug Interrupt Abnormalities PDF | HTML 2025年 2月 25日
Application note Robust and Simple TCM Totem Pole PFC Control Using C2000 and GaN PDF | HTML 2025年 2月 13日
Application note C2000 IDE Assist Tool Features Guide (Rev. A) PDF | HTML 2025年 1月 29日
Application note ADC Oversampling (Rev. A) PDF | HTML 2024年 8月 6日
White paper How to Meet the Stringent Requirement for the Power Factor and iTHD of 3-Phase ac Input System With Vienna PFC PDF | HTML 2024年 7月 11日
Functional safety information Functional Safety Manual for TMS320F280013x PDF | HTML 2024年 7月 2日
Application note Obtain UL/IEC 60730-1/60335-1 Class B Certification Based on C2000™ MCU Diagnostic Library in Appliances PDF | HTML 2024年 5月 30日
Certificate Certificate of Compliance UL-CA-2340465-0 2024年 5月 23日
Application note Power Supply and Monitoring Solution for C2000 MCU Automotive Applications PDF | HTML 2024年 4月 17日
Application note VREFHI Input Driver Design for C2000 MCUs PDF | HTML 2024年 1月 18日
Application note Optimized Control Schemes for Totem Pole PFC With Digital Controller PDF | HTML 2023年 9月 22日
Application note Migrating Software From 8-Bit (Byte) Addressable CPU’s to C28x CPU (Rev. A) PDF | HTML 2023年 4月 19日
Application note ADC Input Circuit Evaluation for C2000 MCUs (using TINA-TI simulation tool) (Rev. A) PDF | HTML 2023年 3月 24日
Application note ADC Input Circuit Evaluation for C2000 Real-Time MCUs (using PSPICE-FOR-TI) PDF | HTML 2023年 3月 24日
Application note Charge-Sharing Driving Circuits for C2000 ADCs (using PSPICE-FOR-TI) (Rev. A) PDF | HTML 2023年 3月 24日
Application note Charge-Sharing Driving Circuits for C2000 ADCs (using TINA-TI simulation tool) (Rev. A) PDF | HTML 2023年 3月 24日
Application note Methods for Mitigating ADC Memory Cross-Talk (Rev. A) PDF | HTML 2023年 3月 24日
User guide Migration Between TMS320F28002x, TMS320F280015x and TMS320F280013x Guide PDF | HTML 2023年 2月 1日
Application note C2000 SysConfig Linker Command Tool PDF | HTML 2023年 1月 26日
Application note Hardware Design Guide for F2800x C2000™ Real-Time MCU Series (Rev. A) PDF | HTML 2022年 12月 21日
Product overview C2000 F280013x Real-Time Microcontrollers PDF | HTML 2022年 10月 18日
Application note Interfacing EEPROM Using PMBus in I2C Mode PDF | HTML 2022年 5月 6日
Application note Real-Time Benchmarks Showcasing C2000™ Control MCU's Optimized Signal Chain (Rev. A) PDF | HTML 2021年 12月 15日
E-book Real-Time Control Reference Guide PDF | HTML 2021年 10月 29日
Application note C2000 SysConfig PDF | HTML 2021年 10月 20日
Application note Designing With the C2000™ Embedded Pattern Generator (EPG) PDF | HTML 2021年 10月 20日
White paper Speed Up Development With C2000™ Real-Time MCUs Using SysConfig 2021年 10月 20日
White paper Prototype Motor Drive System for Autonomous Industrial Mobile Robots PDF | HTML 2021年 9月 29日
Application note Leverage New Type ePWM Features for Multiple Phase Control PDF | HTML 2021年 5月 11日
More literature Maximize density, power, and reliability with TI GaN and C2000™ real-time MCUs 2020年 12月 15日
Application note Secure BOOT On C2000 Device 2020年 7月 21日
Application note Enhancing Device Security by Using JTAGLOCK Feature PDF | HTML 2020年 5月 27日
Application note Configurable Error Generator for Controller Area Network PDF | HTML 2019年 12月 19日
Application note How to Maximize GPIO Usage in C2000 Devices PDF | HTML 2019年 10月 8日
Application note C2000 Software Controlled Firmware Update Process PDF | HTML 2019年 5月 8日
White paper Breakthrough technologies lead the solar power industry into the future 2018年 7月 27日
White paper Exploring the evolution and optimization of wireless power transfer 2018年 7月 27日
White paper Maximizing power for Level 3 EV charging stations 2018年 6月 12日
White paper Charging stations: Toward an EV support infrastructure 2017年 5月 9日
Application note Calculator for CAN Bit Timing Parameters PDF | HTML 2016年 3月 22日
Application note Calculating FIT for a Mission Profile 2015年 3月 24日
Application note I2C Bus Pull-Up Resistor Calculation PDF | HTML 2015年 2月 13日
Application note Center-Aligned Space Vector PWM Realization for 3 Phase 3 Level Inverter 2012年 10月 25日
Product overview Breakthrough InstaSPIN™-FOC motor control technology is here 2012年 10月 17日
White paper Implementing Arc Detection in Solar Applications 2012年 8月 3日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TMDSCNCD2800137 — TMS320F2800137 評估模組 controlCARD

TMDSCNCD2800137 是一款用於 TI C2000™ MCU 系列 TMS320F280013x 裝置的低成本評估和開發板。除了隨附 HSEC180 (180 針腳高速) 邊緣連接器，還可用作 controlCARD，是初始評估和原型設計的理想之選。對於評估 TMDSCNCD2800137，需要 180 接腳擴充站 TMDSHSECDOCK，並且可以單獨購買。
使用指南: PDF | HTML
TI.com 無法提供
開發板

XDS110ISO-EVM — 適用於 C2000 和 Sitara™ controlSOM 的 XDS110 隔離插入式評估模組

XDS110 隔離插入式電路板是一款適用於 C2000 和 Sitara controlSOM 的即時偵錯及 Flash 編程評估模組。可透過非隔離式 120 針腳連接器或電氣隔離式 16 針腳連接器連接 C2000 及 Sitara controlSOM。兩種接頭皆具備 JTAG/cJTAG/SWD 支援和全雙工 UART 埠。電路板支援兩個額外功能，可在目標電路板偵錯中使用：序列周邊介面 (SPI) 至四個隔離式數位類比轉換器 (DAC) 通道，以及最多六個數位和四個類比非隔離通道。
使用指南: PDF | HTML
TI.com 無法提供
開發板

ALGO-3P-UISP1-TI — 適用於德州儀器裝置的 Algocraft μISP1 編程器

μISP 可以連接到主機 PC (內建 RS-232、USB、LAN 連接) 或獨立模式工作。

在單機模式下，只要按下「開始」按鈕或透過一些 TTL 控制線，就可以執行編程週期。

其緊湊的尺寸和多功能性可輕鬆整合到生產環境、手動和自動化程序中。

從：Algocraft
造訪合作夥伴網站
開發套件

LAUNCHXL-F2800137 — 適用於 C2000™ 即時 MCU 的 TMS320F2800137 LaunchPad™ 開發套件

LAUNCHXL-F2800137 是適用於 TI C2000™ 即時微控制器 F280013x 裝置系列的開發電路板。其適合進行初始評估與原型設計，提供標準化且使用方便的平台，可讓您開發下一個應用。此擴充版本 LaunchPad™ 開發套件提供額外針腳以助開發，並支援連接兩個 BoosterPack™ 外掛模組。屬於 TI MCU LaunchPad 龐大生態系統的一部分，也與各種外掛程式模組交互相容。

使用指南: PDF | HTML
TI.com 無法提供
硬體程式設計工具

ALGO-3P-WRITENOW — Algocraft WriteNow！程式設計工具

WriteNow! 系統內編程器系列是可編程產業的一大突破。此編程器支援多家製造商的眾多裝置 (例如微控制器、記憶體、CPLD 與其他可編程裝置)。其尺寸精巧，便於整合至 ATE 與固定裝置。編程器可單機運作，或透過內建的 RS-232、LAN 與 USB 連接埠與主機電腦連線，並隨附操作簡易的工具軟體。

從：Algocraft
造訪合作夥伴網站
軟體開發套件 (SDK)

C2000WARE — C2000Ware for C2000 Microcontrollers

C2000Ware is a cohesive set of software and documentation created to minimize development time. It includes device-specific drivers, libraries, and peripheral examples.

  • Hardware design schematics, BOM, gerber files, and documentation for C2000 controlCARDS, Experimenter Kits, and LaunchPads.
  • (...)
支援產品和硬體

支援產品和硬體
瀏覽 下載選項
軟體開發套件 (SDK)

C2000WARE-DIGITALPOWER-SDK — DigitalPower SDK for C2000 Real-time Controllers

    • DigitalPower SDK for C2000™ microcontrollers (MCU) is a cohesive set of software infrastructure, tools, and documentation designed to minimize C2000 MCU based digital power system development time targeted for various AC-DC, DC-DC and DC-AC power supply applications. The software includes (...)
支援產品和硬體

支援產品和硬體
瀏覽 下載選項
軟體開發套件 (SDK)

C2000WARE-MOTORCONTROL-SDK — MotorControl software development kit (SDK) for C2000™ MCUs

MotorControl SDK for C2000™ microcontrollers (MCU) is a cohesive set of software infrastructure, tools, and documentation designed to minimize C2000 real-time controller based motor control system development time targeted for various three-phase motor control applications. The software (...)

支援產品和硬體

支援產品和硬體
瀏覽 下載選項
韌體

USIT-3P-SECIC-HSM — Uni-Sentry SecIC-HSM 韌體

SecIC-HSM 旨在滿足 MCU/SoC 晶片所需的網路安全要求。HSM 韌體可應用於汽車、新能源、光伏、機器人、醫療保健與航空等領域。提供的網路安全功能包括安全開機、安全通訊 (SecOC)、安全診斷、安全儲存、安全更新、安全偵錯和金鑰管理。SecIC-HSM 的優點：一站式網路安全解決方案，具備跨晶片系列的全方位軟體相容性，擁有業界領先的性能，已在近 30 家 OEM 的量產車型中成功部署，累計出貨超過 300 萬套。
從：Shanghai Uni-Sentry Intelligent Technology Co., LTD
View Options
韌體

USIT-3P-SECIC-PQC — Uni-Sentry SecIC-PQC 演算法韌體

Uni-Sentry 的安全解決方案採用 PQC 演算法，能夠抵抗量子電腦對傳統加密演算法所造成的解密威脅。PQC 韌體與硬體安全模組 (HSM) 進行協同優化，利用硬體加速與安全性強化，以提升加密演算法的執行效率與安全性。 


Uni-Sentry 持續監控全球量子運算的發展，並更新其演算法組合。當前的 PQC 產品功能包括：

  • SP 800-208：LMS 和 XMSS
  • FIPS 203 (ML-KEM)：CRYSTALS-KYBER
  • FIPS 204 (ML-DSA)：CRYSTALS-Dilithium
  • FIPS 205 (SLH-DSA)： SPHINCS+ 

技術亮點 

  • 量子抗性認證：與 (...)
從：Shanghai Uni-Sentry Intelligent Technology Co., LTD
View Options
快速入門

TI-DEVELOPER-ZONE — Start embedded development on your desktop or in the cloud

From evaluation to deployment the TI Developer Zone provides a comprehensive range of software, tools and training to ensure that you have everything you need for each stage of the development process.
支援產品和硬體

支援產品和硬體
開始使用
IDE、配置、編譯器或偵錯程式

C2000_CLA_SAFETI_CQKIT_RV — C2000™ and CLA safety compiler qualification kit (leverages compiler release validations)

The Safety Compiler Qualification Kit was developed to assist customers in qualifying their use of the TI ARM, C6000, C7000 or C2000/CLA C/C++ Compiler to functional safety standards such as IEC 61508 and ISO 26262.

The Safety Compiler Qualification Kit:

  • is free of charge for TI customers
  • does (...)
支援產品和硬體

支援產品和硬體
下載選項
IDE、配置、編譯器或偵錯程式

CCSTUDIO — Code Composer Studio™ integrated development environment (IDE)

Code Composer Studio is an integrated development environment (IDE) for TI's microcontrollers and processors. It is comprised of a rich suite of tools used to build, debug, analyze and optimize embedded applications. Code Composer Studio is available across Windows®, Linux® and macOS® platforms.

(...)

支援產品和硬體

支援產品和硬體
啟動 下載選項
IDE、配置、編譯器或偵錯程式

SYSCONFIG — 系統配置工具

SysConfig 是一款配置工具，專門設計用來簡化硬體與軟體配置挑戰，進而加速軟體開發。

SysConfig 是 Code Composer Studio™ 整合式開發環境的一部分，也是一個獨立式應用。此外，您也可造訪 TI開發人員區在雲端執行 SysConfig。

SysConfig 提供直覺式圖形使用者介面，可用於配置針腳、周邊設備、無線電、軟體堆疊、RTOS、時脈樹和其他元件。SysConfig 會自動偵測、找出並解決衝突，以加速軟體開發。

View Options
線上培訓

C28X-ACADEMY — C28X-ACADEMY

The C28x Academy is a great resource for developers to learn about C28x-based C2000 real-time microcontrollers. The Academy delivers informational training modules as well as hands-on lab exercises that span a variety of topics.
支援產品和硬體

支援產品和硬體
瀏覽
作業系統 (OS)

WHIS-3P-SAFERTOS — WITTENSTEIN SAFERTOS 預先認證的安全 RTOS

SAFERTOS® 是專為嵌入式處理器設計的獨特即時作業系統。經 TÜV SÜD 預先認證，符合 IEC 61508 SIL3 與 ISO 26262 ASILD 標準。SAFERTOS® 是由 WHIS 專家團隊專為安全而打造，適用於全球重要安全應用。WHIS 與德州儀器的合作已經超過十年。在此期間，WHIS 已將 SAFERTOS® 移植至各種 TI 處理器，支援所有熱門核心，並可依要求提供其他架構。SAFERTOS® 專為您的特定處理器/編譯器組合量身打造，隨附完整的原始程式碼與設計保證包，可完全一目了然整個設計生命週期。許多 WHIS 客戶開始使用 FreeRTOS (...)
從：WITTENSTEIN High Integrity Systems
造訪合作夥伴網站
軟體程式設計工具

UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors

UniFlash is a software tool for programming on-chip flash on TI microcontrollers and wireless connectivity devices and on-board flash for TI processors. UniFlash provides both graphical and command-line interfaces.

UniFlash can be run from the cloud on the TI Developer Zone or downloaded and used (...)

支援產品和硬體

支援產品和硬體
啟動 下載選項
模擬型號

TMS320F2800135 PM with VREG BSDL Model

SPRM819.ZIP (2 KB) - BSDL Model
下載
模擬型號

TMS320F2800137, TMS320F2800135, TMS320F2800133 PM BSDL Model

SPRM818.ZIP (2 KB) - BSDL Model
下載
模擬型號

TMS320F2800137, TMS320F2800135, TMS320F2800133 PM IBIS Model

SPRM820.ZIP (118 KB) - IBIS Model
下載
模擬型號

TMS320F2800137, TMS320F2800135, TMS320F2800133, TMS320F2800132 PT BSDL Model

SPRM817.ZIP (2 KB) - BSDL Model
下載
模擬型號

TMS320F2800137, TMS320F2800135, TMS320F2800133, TMS320F2800132 PT IBIS Model

SPRM821.ZIP (117 KB) - IBIS Model
下載
模擬型號

TMS320F2800137, TMS320F2800135, TMS320F2800133, TMS320F2800132 RGZ BSDL Model

SPRM816.ZIP (2 KB) - BSDL Model
下載
模擬型號

TMS320F2800137, TMS320F2800135, TMS320F2800133, TMS320F2800132 RGZ IBIS Model

SPRM822.ZIP (117 KB) - IBIS Model
下載
模擬型號

TMS320F2800137, TMS320F2800135, TMS320F2800133, TMS320F2800132 RHB BSDL Model

SPRM815.ZIP (1 KB) - BSDL Model
下載
模擬型號

TMS320F2800137, TMS320F2800135, TMS320F2800133, TMS320F2800132 RHB IBIS Model

SPRM823.ZIP (117 KB) - IBIS Model
下載
設計工具

C2000-3P-SEARCH — C2000 第三方搜尋工具

TI has partnered with multiple companies to offer a wide range of solutions and services for TI C2000 devices. These companies can accelerate your path to production using C2000 devices. Download this search tool to quickly browse third-party details and find the right third-party to meet your (...)
下載
參考設計

TIDM-02010 — 用於暖通空調的數位交錯式 PFC 雙馬達控制參考設計

TIDM-02010 參考設計是一款 1.5-kW 雙馬達驅動和 PFC 控制參考設計，適用於暖通空調應用的變頻空調室外機控制器；其中展示實作無感測器 3 相 PMSM 向量控制的方法，適用於壓縮機和風扇馬達驅動器，以及數位交錯式升壓 PFC，可透過單一 C2000™ 微控制器滿足新的效率標準。此參考設計提供的軟硬體皆經過測試且隨時可用，有助於加快開發至上市時間。參考設計包括硬體設計檔案和軟體程式碼。
Design guide: PDF
封裝 針腳 CAD 符號、佔位空間與 3D 模型
LQFP (PM) 64 Ultra Librarian
LQFP (PT) 48 Ultra Librarian
VQFN (RGZ) 48 Ultra Librarian
VQFN (RHB) 32 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片