首頁 邏輯元件和電壓轉換 電壓轉換器及電平移位器 電壓轉換器
首頁
邏輯元件和電壓轉換
電壓轉換器及電平移位器
電壓轉換器
最新

TXS0204

現行

適用開漏和推拉應用的 4 位元雙向電壓位準移位器

立即訂購
產品規格表

TXS0204

現行
產品規格表 立即訂購

產品詳細資料

Bits (#) 4 Data rate (max) (Mbps) 0.00005 Topology Open drain, Push-Pull Direction control (typ) Auto-direction Vin (min) (V) 1.1 Vin (max) (V) 3.6 Vout (min) (V) 1.65 Vout (max) (V) 5.5 Applications GPIO, I2C, SMbus Features Bidirectional, Edge rate accelerator, Integrated pullup resistors Technology family TXS Supply current (max) (mA) 25 Rating Catalog Operating temperature range (°C) -40 to 125
Bits (#) 4 Data rate (max) (Mbps) 0.00005 Topology Open drain, Push-Pull Direction control (typ) Auto-direction Vin (min) (V) 1.1 Vin (max) (V) 3.6 Vout (min) (V) 1.65 Vout (max) (V) 5.5 Applications GPIO, I2C, SMbus Features Bidirectional, Edge rate accelerator, Integrated pullup resistors Technology family TXS Supply current (max) (mA) 25 Rating Catalog Operating temperature range (°C) -40 to 125
DSBGA (YCJ) 12 1.471168 mm² 1.448 x 1.016
  • No direction-control signal needed
  • Maximum data rates:
    • 50Mbps (push pull)
    • 2Mbps (open drain)
  • Available in the Texas Instruments NanoFree™ package
  • 1.1V to 3.6V on A port and 1.65V to 5.5V on B port
  • No power-supply sequencing required – either VCCA or VCCB can be ramped first
  • VCCA can be >, =, < VCCB
  • Latch-up performance exceeds 100mA per JESD 78, class II
  • ESD protection exceeds JESD 22:
    • A port:
      • 2000V Human-Body Model (A114-B)
      • 200V Machine Model (A115-A)
      • 1000V Charged-Device Model (C101)
    • B port:
      • 4kV Human-Body Model (A114-B)
      • 200V Machine Model (A115-A)
      • 1000V Charged-Device Model (C101)
  • No direction-control signal needed
  • Maximum data rates:
    • 50Mbps (push pull)
    • 2Mbps (open drain)
  • Available in the Texas Instruments NanoFree™ package
  • 1.1V to 3.6V on A port and 1.65V to 5.5V on B port
  • No power-supply sequencing required – either VCCA or VCCB can be ramped first
  • VCCA can be >, =, < VCCB
  • Latch-up performance exceeds 100mA per JESD 78, class II
  • ESD protection exceeds JESD 22:
    • A port:
      • 2000V Human-Body Model (A114-B)
      • 200V Machine Model (A115-A)
      • 1000V Charged-Device Model (C101)
    • B port:
      • 4kV Human-Body Model (A114-B)
      • 200V Machine Model (A115-A)
      • 1000V Charged-Device Model (C101)

This 4-bit non-inverting translator uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.1V to 3.6V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.65V to 5.5V. This allows for low-voltage bidirectional translation between any of the 1.1V, 1.8V, 2.V, 3.3V, and 5V voltage nodes.

When the output-enable (OE) input is low, all outputs are placed in the high-impedance state.

The TXS0104 is designed so that the OE input circuit is supplied by VCCA.

For the high-impedance state during power up or power down, tie OE to GND through a pull-down resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.

This 4-bit non-inverting translator uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.1V to 3.6V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.65V to 5.5V. This allows for low-voltage bidirectional translation between any of the 1.1V, 1.8V, 2.V, 3.3V, and 5V voltage nodes.

When the output-enable (OE) input is low, all outputs are placed in the high-impedance state.

The TXS0104 is designed so that the OE input circuit is supplied by VCCA.

For the high-impedance state during power up or power down, tie OE to GND through a pull-down resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.
filter 尋找其它 電壓轉換器
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 1
類型 標題 日期
* Data sheet TXS0104 4-Bit Bidirectional Voltage-Level Translator for Open-Drain and Push-Pull Applications datasheet (Rev. A) PDF | HTML 2026年 1月 16日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TXS-EVM — 適用於單通道、雙通道、四通道和八通道裝置的轉換器系列評估模組

TXS-EVM 旨在支援單通道、雙通道、四通道和八通道 TXS 裝置。TXS 產品屬於自動雙向電壓位準轉換系列，運作電壓介於 1.2V 與 5.5 V，旨在支援不同產業中的各種通用電壓位準轉換應用。

使用指南: PDF | HTML
TI.com 無法提供
封裝 針腳 CAD 符號、佔位空間與 3D 模型
DSBGA (YCJ) 12 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片