All trademarks are the property of their respective owners.
The LM136-5.0/LM236-5.0/LM336-5.0 integrated circuits are precision 5.0V shunt regulator diodes. These monolithic IC voltage references operate as a low temperature coefficient 5.0V zener with 0.6Ω dynamic impedance. A third terminal on the LM136-5.0 allows the reference voltage and temperature coefficient to be trimmed easily.
The LM136-5.0 series is useful as a precision 5.0V low voltage reference for digital voltmeters, power supplies or op amp circuitry. The 5.0V makes it convenient to obtain a stable reference from low voltage supplies. Further, since the LM136-5.0 operates as a shunt regulator, it can be used as either a positive or negative voltage reference.
The LM136-5.0 is rated for operation over −55°C to +125°C while the LM236-5.0 is rated over a −25°C to +85°C temperature range. The LM336-5.0 is rated for operation over a 0°C to +70°C temperature range. See the for available packages. For applications requiring 2.5V see LM136-2.5.
| Typ | Titel | Datum | ||
|---|---|---|---|---|
| * | Data sheet | LM136-5.0 LM236-5.0 LM336-5.0 5.0V Reference Diode datasheet (Rev. D) | 27 Mär 2013 | |
| E-book | Voltage Supervisor and Reset ICs: Tips, Tricks and Basics | 28 Jun 2019 | ||
| Application note | AN-202 A Digital Multimeter Using the ADD3501 (Rev. C) | 19 Feb 2015 | ||
| Application note | AN-298 Isolation Techniques for Signal Conditioning (Rev. B) | 06 Mai 2013 | ||
| Application note | AN-284 Single-Supply Applications of CMOS MICRODACs (Rev. B) | 22 Apr 2013 | ||
| Application note | Using ADC0808/809 8-Bit uP Compble ADCs w/8-Chan Analog Multiplexr (Rev. B) | 22 Apr 2013 | ||
| Application note | TO-92 Packing Options / Ordering Instructions (Rev. A) | 23 Jun 2010 | ||
| Application note | Data Acq Using ADC0816 & ADC0817 8-Bit ADC w/On-Chip 16 Chan Multiplexr | 10 Mai 2004 | ||
| Application note | AN-275 CMOS D/A Converters Match Most Microprocessors | 02 Mai 2004 |
Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.
This external resistor quick-start calculator tool lets you easily calculate valid external resistor values relative to voltage reference, supply and load-current bounds. With these inputs, you can instantly view the resulting calculations and use the color-coded indications to understand (...)
| Gehäuse | Pins | Herunterladen |
|---|---|---|
| SOIC (D) | 8 | Optionen anzeigen |
| TO-92 (LP) | 3 | Optionen anzeigen |
| WAFERSALE (YS) | — |
Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.
Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support.