TPS53311

AKTIV

Synchroner Abwärtswandler, 2,9 bis 6 V Eingangsspannung, 3 A, mit Eco-Mode und Smooth PWM

Eine neuere Version dieses Produkts ist verfügbar

Gleiche Funktionalität, andere Pinbelegung als verglichener Baustein
TPSM82813 AKTIV Abwärtsmodul, 2,75 bis 6 V, 3 A, mit einstellbarer Frequenz & Nachverfolgung in Gehäuseformat μSIP-G Module with integrated inductor with or without spread spectrum

Produktdetails

Iout (max) (A) 3 Vin (min) (V) 2.9 Vin (max) (V) 6 Topology Buck Type Converter Switching frequency (min) (kHz) 1100 Switching frequency (max) (kHz) 1100 Features Enable, Light load efficiency, Output discharge, Phase Interleaving, Power good, Pre-Bias Start-Up, Synchronous Rectification Control mode Voltage mode Vout (min) (V) 0.6 Vout (max) (V) 4.2 Rating Catalog Operating temperature range (°C) -40 to 85 Iq (typ) (A) 0.00032
Iout (max) (A) 3 Vin (min) (V) 2.9 Vin (max) (V) 6 Topology Buck Type Converter Switching frequency (min) (kHz) 1100 Switching frequency (max) (kHz) 1100 Features Enable, Light load efficiency, Output discharge, Phase Interleaving, Power good, Pre-Bias Start-Up, Synchronous Rectification Control mode Voltage mode Vout (min) (V) 0.6 Vout (max) (V) 4.2 Rating Catalog Operating temperature range (°C) -40 to 85 Iq (typ) (A) 0.00032
VQFN (RGT) 16 9 mm² 3 x 3
  • 95.5% Maximum Efficiency
  • Continuous 3-A Output Current
  • Supports All MLCC Output Capacitor
  • SmoothPWM™ Auto-Skip Eco-mode™ for Light-Load Efficiency
  • Voltage Mode Control
  • Supports Master-Slave Interleaved Operation
  • Synchronization up to ±20% of Nominal Frequency
  • Conversion Voltage Range From 2.9 V to 6 V
  • Soft-Stop Output Discharge During Disable
  • Adjustable Output Voltage Ranging From 0.6 V to 0.84 V × VIN
  • Overcurrent, Overvoltage, and Overtemperature Protection
  • Small, 3 mm × 3 mm, 16-Pin VQFN Package
  • Open-Drain Power Good Indication
  • Internal Boot Strap Switch
  • Low RDS(on), 24 mΩ With 3.3-V Input and 19-mΩ With 5-V Input
  • Supports Prebias Start-Up Functionality
  • 95.5% Maximum Efficiency
  • Continuous 3-A Output Current
  • Supports All MLCC Output Capacitor
  • SmoothPWM™ Auto-Skip Eco-mode™ for Light-Load Efficiency
  • Voltage Mode Control
  • Supports Master-Slave Interleaved Operation
  • Synchronization up to ±20% of Nominal Frequency
  • Conversion Voltage Range From 2.9 V to 6 V
  • Soft-Stop Output Discharge During Disable
  • Adjustable Output Voltage Ranging From 0.6 V to 0.84 V × VIN
  • Overcurrent, Overvoltage, and Overtemperature Protection
  • Small, 3 mm × 3 mm, 16-Pin VQFN Package
  • Open-Drain Power Good Indication
  • Internal Boot Strap Switch
  • Low RDS(on), 24 mΩ With 3.3-V Input and 19-mΩ With 5-V Input
  • Supports Prebias Start-Up Functionality

The TPS53311 provides a fully integrated 3-V to 5-V VIN integrated synchronous FET converter solution with 16 total components, in 200 mm2 of PCB area. Due to the low RDS(on) and TI Proprietary SmoothPWM™ skip mode of operation, it enables 95.5% peak efficiency, and over 90% efficiency at loads as light as 100 mA. It requires only two 22-µF ceramic output capacitors for a power-dense, 3-A solution.

The TPS53311 features a 1.1-MHz switching frequency, SKIP mode operation support, prebias start-up, internal soft start, output soft discharge, internal VBST switch, power good, EN/input UVLO, overcurrent, overvoltage, undervoltage, and overtemperature protections and all ceramic output capacitor support. It supports supply voltage from 2.9 V to 3.5 V and conversion voltage from 2.9 V to 6 V, and output voltage is adjustable from 0.6 V to 0.84 V × VIN.

The TPS53311 is available in the 3 mm × 3 mm 16-pin VQFN package (Green RoHs compliant and Pb free) and operates between –40°C and 85°C.

The TPS53311 provides a fully integrated 3-V to 5-V VIN integrated synchronous FET converter solution with 16 total components, in 200 mm2 of PCB area. Due to the low RDS(on) and TI Proprietary SmoothPWM™ skip mode of operation, it enables 95.5% peak efficiency, and over 90% efficiency at loads as light as 100 mA. It requires only two 22-µF ceramic output capacitors for a power-dense, 3-A solution.

The TPS53311 features a 1.1-MHz switching frequency, SKIP mode operation support, prebias start-up, internal soft start, output soft discharge, internal VBST switch, power good, EN/input UVLO, overcurrent, overvoltage, undervoltage, and overtemperature protections and all ceramic output capacitor support. It supports supply voltage from 2.9 V to 3.5 V and conversion voltage from 2.9 V to 6 V, and output voltage is adjustable from 0.6 V to 0.84 V × VIN.

The TPS53311 is available in the 3 mm × 3 mm 16-pin VQFN package (Green RoHs compliant and Pb free) and operates between –40°C and 85°C.

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 4
Typ Titel Datum
* Data sheet TPS53311 3-A Step-Down Regulator With Integrated Switcher datasheet (Rev. B) PDF | HTML 27 Sep 2016
Selection guide Power Management Guide 2018 (Rev. R) 25 Jun 2018
Application note Unified Ground Connection Recommendation on TPS53K- Integrated FET-Converter Dev 25 Jan 2017
User guide Using the TPS53311EVM-561, a 3-A Eco-mode(TM) Integrated Switcher w/Mastr-Slave (Rev. A) 11 Nov 2010

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

TPS53311EVM-561 — Evaluierungsmodul für TPS53311 Synchron-Abwärts-DC/DC-Wandler

The TPS53311EVM-561 is a fully assembled and tested circuit for evaluating the TPS53311 Synchronous Step Down DC/DC Converter.
Benutzerhandbuch: PDF
Simulationsmodell

TPS53311 PSpice Average Model

SLIM226.ZIP (62 KB) - PSpice Model
Berechnungstool

SLUC263 Type III Compensation Calculation Tool

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Produkte
AC/DC & DC/DC controllers (external FET)
TPS40007 Synchroner Abwärtsregler, Quelle/Senke, 2,25-5,5 V, 300 kHz, Vorspannungsbetrieb TPS40009 Synchroner Abwärtsregler, Quelle/Senke, 2,25-5,5 V, 600 kHz, Vorspannungsbetrieb TPS40021 Enhanced Low Input (2,25 V-5,5 V) bis zu 1 MHz Frequenz, synchron. Abwärtswandler, Quelle/Senke TPS40040 Synchroner Abwärtsregler, 2,25 bis 5,5 V Eingangsspannung, 300 kHz, mit geringer Pin-Anzahl TPS40041 Synchroner Abwärtsregler, 2,25 bis 5,5 V Eingangsspannung, 600 kHz, mit geringer Pin-Anzahl TPS40055 Synchroner Abwärtsregler mit breitem Eingangsspannungsbereich (8 V–40 V) und bis zu 1 MHz Frequenz, TPS40057 Synchroner Abwärtsregler mit breitem Eingangsspannungsbereich (8 V–40 V) und bis zu 1 MHz Frequenz, TPS40075 4,5 V bis 28 V, Synchron-Abwärtsregler mit Spannungsvorsteuerung TPS40077 4,5 V bis 28 V, Synchron-Abwärtsregler mit Spannungsvorsteuerung im HTSSOP-Gehäuse TPS40101 4,5-V- bis 18-V-Synchron-Abwärtsregler mit fortschrittlicher Sequenzierung und Ausgangsspannungsrege TPS40170 Synchroner PWM-Abwärtsregler mit breitem Eingangsspannungsbereich, 4,5 bis 60 V TPS40190 4,5 V bis 15 V, 20 A, Synchron-Abwärtsregler TPS40192 4,5-V- bis 18-V-, 20-A-, 600-kHz-Synchron-Abwärtsregler mit Power-Good- TPS40193 4,5-V- bis 18-V-, 20-A-, 300-kHz-Synchron-Abwärtsregler mit Power-Good TPS40195 4,5-V- bis 20-V-, 20-A-Synchron-Abwärtsregler mit Power-Good und Synchronisierung TPS40200 Asynchroner DC/DC-Abwärts-Controller mit breitem Eingangsspannungsbereich TPS40303 3 V bis 20 V, 25 A, 300 kHz-Synchron-Abwärtsregler mit FSS TPS40304 3 V bis 20 V, 25 A, 600-kHz-Synchron-Abwärtsregler mit FSS TPS40305 3-V- bis 20-V-, 25-A-, 1,2-MHz-Synchron-Abwärtsregler mit FSS TPS40322 Synchroner Abwärtscontroller, Zweifach- oder Mehrphasenausgang TPS40400 3 V bis 20 V, 30 A, Synchron-Abwärtsregler mit PMBus™, einschließlich Telemetrie TPS40422 Dualer oder mehrphasiger synchroner Abwärtsregler mit PMBus TPS5130 4,5 V bis 28 V, synchroner Abwärtsregler mit Qualitätsanzeige
AC/DC & DC/DC converters (integrated FET)
TPS53311 Synchroner Abwärtswandler, 2,9 bis 6 V Eingangsspannung, 3 A, mit Eco-Mode und Smooth PWM TPS53313 Synchroner 6-A-Abwärtswandler mit 4,5 bis 16 V und optimiertem Wirkungsgrad bei geringer Last TPS53316 Hocheffizienter 5-A-Abwärtsregler mit integriertem Schalter TPS56121 Synchron-SWIFT™-Abwärtswandler von 4,5 V bis 14 V, 15 A TPS56221 Synchron-SWIFT™-Abwärtswandler von 4,5 V bis 14 V, 25 A
Referenzdesigns

PMP5922 — Synchron-Abwärtswandler für Intel Atom E6xx Tunnel Creek (1,25 V@10 mA)

TI's Highest Power Density Low Input Voltage Complete Intel Atom E6xx (Tunnel Creek) power system designs; in 967mm2 this design has all the voltage regulators needed to power Intel's Atom E6xx CPU platform and fit onto a 70x70 or smaller COM Express Module used in Industrial Automation and Process (...)
Test report: PDF
Schaltplan: PDF
Gehäuse Pins Herunterladen
VQFN (RGT) 16 Optionen anzeigen

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos