UCC27624
Zweikanal-Gate-Treiber für 5 A/5 A mit 4-V-UVLO, 30-V-VDD und niedriger Prop-Verzögerung
UCC27624
- Typical 5-A peak source and sink drive current for each channel
- Input and enable pins capable of handling –10 V
- Output capable of handling –2-V transients
- Absolute maximum VDD voltage: 30 V
- Wide VDD operating range from 4.5 V to 26 V with UVLO
- Two independent gate drive channels
- Independent enable function for each output
- Hysteretic-logic thresholds for high noise immunity
- VDD independent input thresholds (TTL compatible)
- Fast propagation delays (17-ns typical)
- Fast rise and fall times (6-ns and 10-ns typical)
- 1-ns typical delay matching between the two channels
- Two channels can be paralleled for higher drive current
- SOIC8 and VSSOP8 PowerPAD™ package options
- Operating junction temperature range of –40°C to 150°C
The UCC27624 is a dual-channel, high-speed, low-side gate driver that effectively drives MOSFET, IGBT, SiC, and GaN power switches. UCC27624 has a typical peak drive strength of 5 A, which reduces rise and fall times of the power switches, lowers switching losses, and increases efficiency. The devices fast propagation delay (17-ns typical) yields better power stage efficiency by improving the deadtime optimization, pulse width utilization, control loop response, and transient performance of the system.
UCC27624 can handle –10 V at its inputs, which improves robustness in systems with moderate ground bouncing. The inputs are independent of supply voltage and can be connected to most controller outputs for maximum control flexibility. An independent enable signal allows the power stage to be controlled independently of main control logic. In the event of a system fault, the gate driver can quickly shut-off by pulling enable low. Many high-frequency switching power supplies exhibit noise at the gate of the power device, which can get injected into the output pin on the gate driver and can cause the driver to malfunction. The devices transient reverse current and reverse voltage capability allow it to tolerate noise on the gate of the power device or pulse-transformer and avoid driver malfunction.
The UCC27624 also features undervoltage lockout (UVLO) for improved system robustness. When there is not enough bias voltage to fully enhance the power device, the gate driver output is held low by the strong internal pull down MOSFET.
Ähnliche Produkte, die für Sie interessant sein könnten
Drop-In-Ersatz mit verbesserter Funktionalität im Gegensatz zum verglichenen Baustein
Technische Dokumentation
Typ | Titel | Datum | ||
---|---|---|---|---|
* | Data sheet | UCC27624 30-V, 5-A, Dual-Channel, Low-Side Gate Driver with –10-V Input Capability datasheet (Rev. C) | PDF | HTML | 13 Feb 2023 |
Application note | Selecting Gate Drivers for HVAC Systems | PDF | HTML | 04 Apr 2024 | |
Application note | Why use a Gate Drive Transformer? | PDF | HTML | 04 Mär 2024 | |
Application note | Review of Different Power Factor Correction (PFC) Topologies' Gate Driver Needs | PDF | HTML | 22 Jan 2024 | |
Technical article | Managing power-supply noise with a 30-V gate driver | PDF | HTML | 07 Dez 2021 | |
Application note | Benefits of a Compact, Powerful, and Robust Low-Side Gate Driver | PDF | HTML | 10 Nov 2021 |
Design und Entwicklung
Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.
UCC27624DGNEVM — UCC27624-Evaluierungsmodul für zweikanaligen 30-V-, 5-A-Hochgeschwindigkeits-Low-Side-Gate-Treiber
Das Evaluierungsmodul (EVM) UCC27624 ist zur Evaluierung von Einkanal-Gate-Treibern für 30 V und 5 A konzipiert. Mit diesem EVM kann der Treiber-IC anhand der im Datenblatt angegebenen Parameter evaluiert werden. Der Treiber-IC kann im Hinblick auf verschiedene kapazitive und ohmsche Lasten (...)
UCC27624EVM — UCC27624-Evaluierungsmodul für zweikanaligen 30-V-, 5-A-Hochgeschwindigkeits-Lowside-Gate-Treiber
Das Evaluierungsmodul (EVM) UCC27624 ist zur Evaluierung von Einkanal-Gate-Treibern von TI für 30 V und 5 A konzipiert. Mit diesem EVM kann der Treiber-IC anhand der im Datenblatt angegebenen Parameter evaluiert werden. Der Treiber-IC kann im Hinblick auf verschiedene kapazitive und ohmsche Lasten (...)
PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool
Gehäuse | Pins | Herunterladen |
---|---|---|
HVSSOP (DGN) | 8 | Optionen anzeigen |
SOIC (D) | 8 | Optionen anzeigen |
Bestellen & Qualität
- RoHS
- REACH
- Bausteinkennzeichnung
- Blei-Finish/Ball-Material
- MSL-Rating / Spitzenrückfluss
- MTBF-/FIT-Schätzungen
- Materialinhalt
- Qualifikationszusammenfassung
- Kontinuierliches Zuverlässigkeitsmonitoring
- Werksstandort
- Montagestandort
Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.
Support und Schulungen
TI E2E™-Foren mit technischem Support von TI-Ingenieuren
Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.
Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support.