UCC28019A
65 kHz-CCM-PFC-Controller mit verbessertem Start und Transientenreaktion
Eine neuere Version dieses Produkts ist verfügbar
Gleiche Funktionalität, andere Pinbelegung als verglichener Baustein
UCC28019A
- 8-Pin Solution Reduces External Components
- Wide-Range Universal AC Input Voltage
- Fixed 65-kHz Operating Frequency
- Maximum Duty Cycle of 98% (typ.)
- Output Over/Undervoltage Protection
- Input Brown-Out Protection
- Cycle-by-Cycle Peak Current Limiting
- Open Loop Detection
- Low-Power User-Controlled Standby Mode
The UCC28019A 8-pin active Power Factor Correction (PFC) controller uses the boost topology operating in Continuous Conduction Mode (CCM). The controller is suitable for systems in the 100 W to >2 kW range over a wide-range universal ac line input. Start-up current during undervoltage lockout is less than 200 µA. The user can control low power standby mode by pulling the VSENSE pin below 0.77 V.
Low-distortion wave shaping of the input current using average current mode control is achieved without input line sensing, reducing the external component count. Simple external networks allow for flexible compensation of the current and voltage control loops. The switching frequency is internally fixed and trimmed to better than ±5% accuracy at 25°C. Fast 1.5-A peak gate current drives the external switch.
Numerous system-level protection features include peak current limit, soft over-current, open-loop detection, input brown-out, and output over/undervoltage. Soft-start limits boost current during start-up. A trimmed internal reference provides accurate protection thresholds and a regulation set-point. An internal clamp limits the gate drive voltage to 12.5 V.
Technische Dokumentation
Typ | Titel | Datum | ||
---|---|---|---|---|
* | Data sheet | UCC28019A 8-Pin Continuous Conduction Mode (CCM) PFC Controller datasheet (Rev. D) | PDF | HTML | 24 Okt 2017 |
Product overview | PFC Controller Step-by-Step Selection Guide | PDF | HTML | 28 Feb 2023 | |
Technical article | Is PFC possible without input voltage sensing? | PDF | HTML | 14 Sep 2016 | |
Application note | The Solution To Optimize The Load Dynamic Performance in UCC28019A LED Lighting (Rev. A) | 16 Jan 2014 | ||
Application note | Optimizing the UCC28019A to Avoid Audible Noise | 20 Jun 2013 | ||
User guide | UCC28019A EVM 350-W PFC Converter User's Guide (Rev. A) | 07 Mai 2009 |
Design und Entwicklung
Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.
UCC28019AEVM — UCC28019AEVM-Evaluierungsmodul
The UCC28019A evaluation module (EVM) is a 350 W off-line Power Factor Correction (PFC) boost converter providing a 390 V regulated output at 0.9 A of load current. The PFC converter accommodates an input voltage range of 85 VAC to 265 VAC and uses average current mode (...)
Gehäuse | Pins | Herunterladen |
---|---|---|
SOIC (D) | 8 | Optionen anzeigen |
Bestellen & Qualität
- RoHS
- REACH
- Bausteinkennzeichnung
- Blei-Finish/Ball-Material
- MSL-Rating / Spitzenrückfluss
- MTBF-/FIT-Schätzungen
- Materialinhalt
- Qualifikationszusammenfassung
- Kontinuierliches Zuverlässigkeitsmonitoring
- Werksstandort
- Montagestandort
Support und Schulungen
TI E2E™-Foren mit technischem Support von TI-Ingenieuren
Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.
Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support.