SPRUIZ1B July   2023  – August 2024 TMS320F28P650DH , TMS320F28P650DK , TMS320F28P650SH , TMS320F28P650SK , TMS320F28P659DH-Q1 , TMS320F28P659DK-Q1 , TMS320F28P659SH-Q1

 

  1.   1
  2.   Read This First
    1.     About This Manual
    2.     Notational Conventions
    3.     Glossary
    4.     Related Documentation From Texas Instruments
    5.     Support Resources
    6.     Trademarks
  3. 1 C2000™ Microcontrollers Software Support
    1. 1.1 Introduction
    2. 1.2 C2000Ware Structure
    3. 1.3 Documentation
    4. 1.4 Devices
    5. 1.5 Libraries
    6. 1.6 Code Composer Studio™ Integrated Development Environment (IDE)
    7. 1.7 SysConfig and PinMUX Tool
  4. 2 C28x Processor
    1. 2.1 Introduction
    2. 2.2 C28X Related Collateral
    3. 2.3 Features
    4. 2.4 Floating-Point Unit (FPU)
    5. 2.5 Trigonometric Math Unit (TMU)
    6. 2.6 VCRC Unit
  5. 3 C28x System Control and Interrupts
    1. 3.1  C28x System Control Introduction
      1. 3.1.1 SYSCTL Related Collateral
    2. 3.2  System Control Functional Description
      1. 3.2.1 Device Identification
    3. 3.3  Resets
      1. 3.3.1  Reset Sources
      2. 3.3.2  External Reset (XRS)
      3. 3.3.3  Simulate External Reset (SIMRESET.XRS)
      4. 3.3.4  Power-On Reset (POR)
      5. 3.3.5  Debugger Reset (SYSRS)
      6. 3.3.6  Simulate CPU1 Reset (SIMRESET)
      7. 3.3.7  Watchdog Reset (WDRS)
      8. 3.3.8  NMI Watchdog Reset (NMIWDRS)
      9. 3.3.9  Secure Code Copy Reset (SCCRESET)
      10. 3.3.10 EtherCAT SubDevice Controller (ESC) Module Reset Output
    4. 3.4  Peripheral Interrupts
      1. 3.4.1 Interrupt Concepts
      2. 3.4.2 Interrupt Architecture
        1. 3.4.2.1 Peripheral Stage
        2. 3.4.2.2 PIE Stage
        3. 3.4.2.3 CPU Stage
        4. 3.4.2.4 Dual-CPU Interrupt Handling
      3. 3.4.3 Interrupt Entry Sequence
      4. 3.4.4 Configuring and Using Interrupts
        1. 3.4.4.1 Enabling Interrupts
        2. 3.4.4.2 Handling Interrupts
        3. 3.4.4.3 Disabling Interrupts
        4. 3.4.4.4 Nesting Interrupts
      5. 3.4.5 PIE Channel Mapping
        1. 3.4.5.1 PIE Interrupt Priority
          1. 3.4.5.1.1 Channel Priority
          2. 3.4.5.1.2 Group Priority
      6. 3.4.6 System Error Interrupts
      7. 3.4.7 Vector Tables
    5. 3.5  Exceptions and Non-Maskable Interrupts
      1. 3.5.1 Configuring and Using NMIs
      2. 3.5.2 Emulation Considerations
      3. 3.5.3 NMI Sources
        1. 3.5.3.1 Missing Clock Detection
        2. 3.5.3.2 RAM Uncorrectable Error
        3. 3.5.3.3 Flash Uncorrectable ECC Error
        4. 3.5.3.4 ROM Uncorrectable Error
        5. 3.5.3.5 NMI Vector Fetch Mismatch
        6. 3.5.3.6 CPU2 Watchdog or NMI Watchdog Reset
        7. 3.5.3.7 EtherCAT Reset Out
        8. 3.5.3.8 CRC Fail
        9. 3.5.3.9 ERAD NMI
      4. 3.5.4 Illegal Instruction Trap (ITRAP)
    6. 3.6  Safety Features
      1. 3.6.1 Write Protection on Registers
        1. 3.6.1.1 LOCK Protection on System Configuration Registers
        2. 3.6.1.2 EALLOW Protection
      2. 3.6.2 CPU1 and CPU2 ePIE Vector Address Validity Check
      3. 3.6.3 NMIWDs
      4. 3.6.4 ECC and Parity Enabled RAMs, Shared RAMs Protection
      5. 3.6.5 ECC Enabled Flash Memory
      6. 3.6.6 ERRORSTS Pin
    7. 3.7  Clocking
      1. 3.7.1 Clock Sources
        1. 3.7.1.1 Primary Internal Oscillator (INTOSC2)
        2. 3.7.1.2 Backup Internal Oscillator (INTOSC1)
        3. 3.7.1.3 External Oscillator (XTAL)
        4. 3.7.1.4 Auxiliary Clock Input (AUXCLKIN)
      2. 3.7.2 Derived Clocks
        1. 3.7.2.1 Oscillator Clock (OSCCLK)
        2. 3.7.2.2 System PLL Output Clock (PLLRAWCLK)
        3. 3.7.2.3 Auxiliary Oscillator Clock (AUXOSCCLK)
        4. 3.7.2.4 Auxiliary PLL Output Clock (AUXPLLRAWCLK)
      3. 3.7.3 Device Clock Domains
        1. 3.7.3.1 System Clock (PLLSYSCLK)
        2. 3.7.3.2 CPU Clock (CPUCLK)
        3. 3.7.3.3 CPU Subsystem Clock (SYSCLK and PERx.SYSCLK)
        4. 3.7.3.4 Low-Speed Peripheral Clock (LSPCLK and PERx.LSPCLK)
        5. 3.7.3.5 USB Auxiliary Clock (AUXPLLCLK)
        6. 3.7.3.6 CAN Bit Clock
        7. 3.7.3.7 CPU Timer2 Clock (TIMER2CLK)
      4. 3.7.4 External Clock Output (XCLKOUT)
      5. 3.7.5 Clock Connectivity
      6. 3.7.6 Using an External Crystal or Resonator
        1. 3.7.6.1 X1/X2 Precondition Circuit
      7. 3.7.7 PLL/AUXPLL
        1. 3.7.7.1 System Clock Setup
        2. 3.7.7.2 USB Auxiliary Clock Setup
        3. 3.7.7.3 SYS PLL/AUX PLL Bypass
      8. 3.7.8 Clock (OSCCLK) Failure Detection
        1. 3.7.8.1 Missing Clock Detection Logic
    8. 3.8  Clock Configuration Semaphore
    9. 3.9  32-Bit CPU Timers 0/1/2
    10. 3.10 Watchdog Timers
      1. 3.10.1 Servicing the Watchdog Timer
      2. 3.10.2 Minimum Window Check
      3. 3.10.3 Watchdog Reset or Watchdog Interrupt Mode
      4. 3.10.4 Watchdog Operation in Low-Power Modes
      5. 3.10.5 Emulation Considerations
    11. 3.11 Low-Power Modes
      1. 3.11.1 IDLE
      2. 3.11.2 STANDBY
      3. 3.11.3 HALT
    12. 3.12 Memory Controller Module
      1. 3.12.1  Dedicated RAM (Dx RAM)
      2. 3.12.2  Local Shared RAM (LSx RAM)
      3. 3.12.3  Global Shared RAM (GSx RAM)
      4. 3.12.4  CPU Message RAM (CPU MSG RAM)
      5. 3.12.5  CLA Message RAM (CLA MSGRAM)
      6. 3.12.6  CLA-DMA MSG RAM
      7. 3.12.7  Access Arbitration
      8. 3.12.8  Access Protection
        1. 3.12.8.1 CPU Fetch Protection
        2. 3.12.8.2 CPU Write Protection
        3. 3.12.8.3 CPU Read Protection
        4. 3.12.8.4 CLA Fetch Protection
        5. 3.12.8.5 CLA Write Protection
        6. 3.12.8.6 CLA Read Protection
        7. 3.12.8.7 DMA Write Protection
      9. 3.12.9  Memory Error Detection, Correction, and Error Handling
        1. 3.12.9.1 Error Detection and Correction
        2. 3.12.9.2 Error Handling
      10. 3.12.10 Application Test Hooks for Error Detection and Correction
      11. 3.12.11 ROM Test
      12. 3.12.12 RAM Initialization
    13. 3.13 JTAG
      1. 3.13.1 JTAG Noise and TAP_STATUS
    14. 3.14 Live Firmware Update (LFU)
      1. 3.14.1 LFU Background
      2. 3.14.2 LFU Switchover Steps
      3. 3.14.3 Device Features Supporting LFU
        1. 3.14.3.1 Multi-Bank Flash
        2. 3.14.3.2 PIE Vector Table Swap
        3. 3.14.3.3 LS0/LS1 RAM Memory Swap for CPU1
          1. 3.14.3.3.1 Applicability to CLA LFU
        4. 3.14.3.4 D2/D3 RAM Memory Swap for CPU2
        5. 3.14.3.5 Additional Points Pertaining to LS0/LS1 and D2/D3 RAM Memory Swap
      4. 3.14.4 LFU Switchover
      5. 3.14.5 LFU Resources
    15. 3.15 System Control Register Configuration Restrictions
    16. 3.16 MCU Configuration (MCUCNFx)
    17. 3.17 Software
      1. 3.17.1 SYSCTL Examples
        1. 3.17.1.1 Missing clock detection (MCD) - SINGLE_CORE
        2. 3.17.1.2 XCLKOUT (External Clock Output) Configuration - SINGLE_CORE
      2. 3.17.2 MEMCFG Examples
        1. 3.17.2.1 Correctable & Uncorrectable Memory Error Handling
        2. 3.17.2.2 Shared RAM Management (CPU1) - C28X_DUAL
        3. 3.17.2.3 Shared RAM Management (CPU2) - C28X_DUAL
      3. 3.17.3 NMI Examples
        1. 3.17.3.1 NMI handling - C28X_DUAL
        2. 3.17.3.2 Watchdog Reset - C28X_DUAL
      4. 3.17.4 TIMER Examples
        1. 3.17.4.1 CPU Timers - SINGLE_CORE
        2. 3.17.4.2 CPU Timers - SINGLE_CORE
      5. 3.17.5 WATCHDOG Examples
        1. 3.17.5.1 Watchdog - SINGLE_CORE
    18. 3.18 System Control Registers
      1. 3.18.1  SYSCTRL Base Address Table
      2. 3.18.2  LFU Base Address Table
      3. 3.18.3  CPUTIMER_REGS Registers
      4. 3.18.4  PIE_CTRL_REGS Registers
      5. 3.18.5  WD_REGS Registers
      6. 3.18.6  NMI_INTRUPT_REGS Registers
      7. 3.18.7  XINT_REGS Registers
      8. 3.18.8  SYNC_SOC_REGS Registers
      9. 3.18.9  CPU1_DMA_CLA_SRC_SEL_REGS Registers
      10. 3.18.10 CPU2_DMA_CLA_SRC_SEL_REGS Registers
      11. 3.18.11 DEV_CFG_REGS Registers
      12. 3.18.12 CLK_CFG_REGS Registers
      13. 3.18.13 CPU1_SYS_REGS Registers
      14. 3.18.14 CPU2_SYS_REGS Registers
      15. 3.18.15 CPU1_SYS_STATUS_REGS Registers
      16. 3.18.16 CPU2_SYS_STATUS_REGS Registers
      17. 3.18.17 CPU1_PERIPH_AC_REGS Registers
      18. 3.18.18 CPU2_PERIPH_AC_REGS Registers
      19. 3.18.19 MEM_CFG_REGS Registers
      20. 3.18.20 ACCESS_PROTECTION_REGS Registers
      21. 3.18.21 MEMORY_ERROR_REGS Registers
      22. 3.18.22 ROM_WAIT_STATE_REGS Registers
      23. 3.18.23 TEST_ERROR_REGS Registers
      24. 3.18.24 UID_REGS Registers
      25. 3.18.25 CPU1_LFU_REGS Registers
      26. 3.18.26 CPU2_LFU_REGS Registers
      27. 3.18.27 CPU1TOCPU2_IPC_REGS_CPU1VIEW Registers
      28. 3.18.28 CPU1TOCPU2_IPC_REGS_CPU2VIEW Registers
      29. 3.18.29 CPU2_DMA_CLA_SRC_SEL_REGS Registers
      30. 3.18.30 Register to Driverlib Function Mapping
        1. 3.18.30.1 ASYSCTL Registers to Driverlib Functions
        2. 3.18.30.2 CPUTIMER Registers to Driverlib Functions
        3. 3.18.30.3 MEMCFG Registers to Driverlib Functions
        4. 3.18.30.4 NMI Registers to Driverlib Functions
        5. 3.18.30.5 PIE Registers to Driverlib Functions
        6. 3.18.30.6 SYSCTL Registers to Driverlib Functions
        7. 3.18.30.7 WWD Registers to Driverlib Functions
        8. 3.18.30.8 XINT Registers to Driverlib Functions
  6. 4 ROM Code and Peripheral Booting
    1. 4.1 Introduction
      1. 4.1.1 ROM Related Collateral
    2. 4.2 Device Boot Sequence
    3. 4.3 Device Boot Modes
      1. 4.3.1 Default Boot Modes
      2. 4.3.2 Custom Boot Modes
    4. 4.4 Device Boot Configurations
      1. 4.4.1 Configuring Boot Mode Pins
      2. 4.4.2 Configuring Boot Mode Table Options
      3. 4.4.3 Boot Mode Example Use Cases
        1. 4.4.3.1 Zero Boot Mode Select Pins
        2. 4.4.3.2 One Boot Mode Select Pin
        3. 4.4.3.3 Three Boot Mode Select Pins
    5. 4.5 Device Boot Flow Diagrams
      1. 4.5.1 Boot Flow
      2. 4.5.2 Emulation Boot Flow
      3. 4.5.3 Standalone Boot Flow
    6. 4.6 Device Reset and Exception Handling
      1. 4.6.1 Reset Causes and Handling
      2. 4.6.2 Exceptions and Interrupts Handling
    7. 4.7 Boot ROM Description
      1. 4.7.1  Boot ROM Configuration Registers
        1. 4.7.1.1 GPREG2 Usage and MPOST Configuration
      2. 4.7.2  Booting CPU2
        1. 4.7.2.1 Boot Up Procedure
        2. 4.7.2.2 IPCBOOTMODE Details
        3. 4.7.2.3 Error IPC Command Table
      3. 4.7.3  Entry Points
      4. 4.7.4  Wait Points
      5. 4.7.5  Secure Flash Boot Mode
        1. 4.7.5.1 Secure Flash CPU1 Linker File Example
      6. 4.7.6  Memory Maps
        1. 4.7.6.1 Boot ROM Memory-Maps
        2. 4.7.6.2 Reserved RAM Memory-Maps
      7. 4.7.7  ROM Tables
      8. 4.7.8  Boot Modes and Loaders
        1. 4.7.8.1 Boot Modes
          1. 4.7.8.1.1 Flash Boot
          2. 4.7.8.1.2 RAM Boot
          3. 4.7.8.1.3 Wait Boot
          4. 4.7.8.1.4 Secure LFU Flash Boot
        2. 4.7.8.2 Bootloaders
          1. 4.7.8.2.1 SCI Boot Mode
          2. 4.7.8.2.2 SPI Boot Mode
          3. 4.7.8.2.3 I2C Boot Mode
          4. 4.7.8.2.4 Parallel Boot Mode
          5. 4.7.8.2.5 CAN Boot Mode
          6. 4.7.8.2.6 CAN-FD Boot Mode
          7. 4.7.8.2.7 USB Boot Mode
          8. 4.7.8.2.8 IPC Message Copy to RAM Boot
          9. 4.7.8.2.9 Firmware Update (FWU) Flash Boot
      9. 4.7.9  GPIO Assignments
      10. 4.7.10 Secure ROM Function APIs
      11. 4.7.11 Clock Initializations
      12. 4.7.12 Boot Status Information
        1. 4.7.12.1 Booting Status
        2. 4.7.12.2 Boot Mode and MPOST (Memory Power On Self-Test) Status
      13. 4.7.13 ROM Version
    8. 4.8 Application Notes for Using the Bootloaders
      1. 4.8.1 Bootloader Data Stream Structure
        1. 4.8.1.1 Data Stream Structure 8-bit
      2. 4.8.2 The C2000 Hex Utility
        1. 4.8.2.1 HEX2000.exe Command Syntax
    9. 4.9 Software
      1. 4.9.1 BOOT Examples
  7. 5 Dual Code Security Module (DCSM)
    1. 5.1 Introduction
      1. 5.1.1 DCSM Related Collateral
    2. 5.2 Functional Description
      1. 5.2.1 CSM Passwords
      2. 5.2.2 Emulation Code Security Logic (ECSL)
      3. 5.2.3 CPU Secure Logic
      4. 5.2.4 Execute-Only Protection
      5. 5.2.5 Password Lock
      6. 5.2.6 JTAGLOCK
      7. 5.2.7 Link Pointer and Zone Select
      8. 5.2.8 C Code Example to Get Zone Select Block Addr for Zone1
    3. 5.3 Flash and OTP Erase/Program
    4. 5.4 Secure Copy Code
    5. 5.5 SecureCRC
    6. 5.6 CSM Impact on Other On-Chip Resources
      1. 5.6.1 RAMOPEN
    7. 5.7 Incorporating Code Security in User Applications
      1. 5.7.1 Environments That Require Security Unlocking
      2. 5.7.2 CSM Password Match Flow
      3. 5.7.3 C Code Example to Unsecure C28x Zone1
      4. 5.7.4 C Code Example to Resecure C28x Zone1
      5. 5.7.5 Environments That Require ECSL Unlocking
      6. 5.7.6 ECSL Password Match Flow
      7. 5.7.7 ECSL Disable Considerations for any Zone
        1. 5.7.7.1 C Code Example to Disable ECSL for C28x Zone1
      8. 5.7.8 Device Unique ID
    8. 5.8 Software
      1. 5.8.1 DCSM Examples
        1. 5.8.1.1 Empty DCSM Tool Example
        2. 5.8.1.2 DCSM Memory partitioning Example
    9. 5.9 DCSM Registers
      1. 5.9.1 DCSM Base Address Table
      2. 5.9.2 DCSM_Z1_REGS Registers
      3. 5.9.3 DCSM_Z2_REGS Registers
      4. 5.9.4 DCSM_COMMON_REGS Registers
      5. 5.9.5 DCSM_Z1_OTP Registers
      6. 5.9.6 DCSM_Z2_OTP Registers
      7. 5.9.7 DCSM Registers to Driverlib Functions
  8. 6 Background CRC-32 (BGCRC)
    1. 6.1 Introduction
      1. 6.1.1 BGCRC Related Collateral
      2. 6.1.2 Features
      3. 6.1.3 Block Diagram
      4. 6.1.4 Memory Wait States and Memory Map
    2. 6.2 Functional Description
      1. 6.2.1 Data Read Unit
      2. 6.2.2 CRC-32 Compute Unit
      3. 6.2.3 CRC Notification Unit
        1. 6.2.3.1 CPU Interrupt and NMI
      4. 6.2.4 Operating Modes
        1. 6.2.4.1 CRC Mode
        2. 6.2.4.2 Scrub Mode
      5. 6.2.5 BGCRC Watchdog
      6. 6.2.6 Hardware and Software Faults Protection
    3. 6.3 Application of the BGCRC
      1. 6.3.1 Software Configuration
      2. 6.3.2 Decision on Error Response Severity
      3. 6.3.3 Decision of Controller for CLA_CRC
      4. 6.3.4 Execution of Time Critical Code from Wait-Stated Memories
      5. 6.3.5 BGCRC Execution
      6. 6.3.6 Debug/Error Response for BGCRC Errors
      7. 6.3.7 BGCRC Golden CRC-32 Value Computation
    4. 6.4 Software
      1. 6.4.1 BGCRC Examples
        1. 6.4.1.1 BGCRC CPU Interrupt Example
        2. 6.4.1.2 BGCRC Example with Watchdog and Lock
        3. 6.4.1.3 CLA-BGCRC Example in CRC mode
        4. 6.4.1.4 CLA-BGCRC Example in Scrub Mode
    5. 6.5 BGCRC Registers
      1. 6.5.1 BGCRC Base Address Table
      2. 6.5.2 BGCRC_REGS Registers
      3. 6.5.3 BGCRC Registers to Driverlib Functions
  9. 7 Control Law Accelerator (CLA)
    1. 7.1 Introduction
      1. 7.1.1 Features
      2. 7.1.2 CLA Related Collateral
      3. 7.1.3 Block Diagram
    2. 7.2 CLA Interface
      1. 7.2.1 CLA Memory
      2. 7.2.2 CLA Memory Bus
      3. 7.2.3 Shared Peripherals and EALLOW Protection
      4. 7.2.4 CLA Tasks and Interrupt Vectors
      5. 7.2.5 CLA Software Interrupt to CPU
    3. 7.3 CLA, DMA, and CPU Arbitration
      1. 7.3.1 CLA Message RAM
      2. 7.3.2 CLA Program Memory
      3. 7.3.3 CLA Data Memory
      4. 7.3.4 Peripheral Registers (ePWM, HRPWM, Comparator)
    4. 7.4 CLA Configuration and Debug
      1. 7.4.1 Building a CLA Application
      2. 7.4.2 Typical CLA Initialization Sequence
      3. 7.4.3 Debugging CLA Code
        1. 7.4.3.1 Software Breakpoint Support (MDEBUGSTOP1)
        2. 7.4.3.2 Legacy Breakpoint Support (MDEBUGSTOP)
      4. 7.4.4 CLA Illegal Opcode Behavior
      5. 7.4.5 Resetting the CLA
    5. 7.5 Pipeline
      1. 7.5.1 Pipeline Overview
      2. 7.5.2 CLA Pipeline Alignment
        1. 7.5.2.1 Code Fragment For MBCNDD, MCCNDD, or MRCNDD
        2.       383
        3. 7.5.2.2 Code Fragment for Loading MAR0 or MAR1
        4.       385
        5. 7.5.2.3 ADC Early Interrupt to CLA Response
      3. 7.5.3 Parallel Instructions
        1. 7.5.3.1 Math Operation with Parallel Load
        2. 7.5.3.2 Multiply with Parallel Add
      4. 7.5.4 CLA Task Execution Latency
    6. 7.6 Software
      1. 7.6.1 CLA Examples
        1. 7.6.1.1 CLA arcsine(x) using a lookup table (cla_asin_cpu01)
        2. 7.6.1.2 CLA arcsine(x) using a lookup table (cla_asin_cpu01)
        3. 7.6.1.3 CLA arctangent(x) using a lookup table (cla_atan_cpu01)
        4. 7.6.1.4 CLA background nesting task
        5. 7.6.1.5 Controlling PWM output using CLA
        6. 7.6.1.6 Just-in-time ADC sampling with CLA
        7. 7.6.1.7 Optimal offloading of control algorithms to CLA
        8. 7.6.1.8 Handling shared resources across C28x and CLA
    7. 7.7 Instruction Set
      1. 7.7.1 Instruction Descriptions
      2. 7.7.2 Addressing Modes and Encoding
      3. 7.7.3 Instructions
        1.       MABSF32 MRa, MRb
        2.       MADD32 MRa, MRb, MRc
        3.       MADDF32 MRa, #16FHi, MRb
        4.       MADDF32 MRa, MRb, #16FHi
        5.       MADDF32 MRa, MRb, MRc
        6.       MADDF32 MRd, MRe, MRf||MMOV32 mem32, MRa
        7.       MADDF32 MRd, MRe, MRf ||MMOV32 MRa, mem32
        8.       MAND32 MRa, MRb, MRc
        9.       MASR32 MRa, #SHIFT
        10.       MBCNDD 16BitDest [, CNDF]
        11.       MCCNDD 16BitDest [, CNDF]
        12.       MCLRC BGINTM
        13.       MCMP32 MRa, MRb
        14.       MCMPF32 MRa, MRb
        15.       MCMPF32 MRa, #16FHi
        16.       MDEBUGSTOP
        17.       MDEBUGSTOP1
        18.       MEALLOW
        19.       MEDIS
        20.       MEINVF32 MRa, MRb
        21.       MEISQRTF32 MRa, MRb
        22.       MF32TOI16 MRa, MRb
        23.       MF32TOI16R MRa, MRb
        24.       MF32TOI32 MRa, MRb
        25.       MF32TOUI16 MRa, MRb
        26.       MF32TOUI16R MRa, MRb
        27.       MF32TOUI32 MRa, MRb
        28.       MFRACF32 MRa, MRb
        29.       MI16TOF32 MRa, MRb
        30.       MI16TOF32 MRa, mem16
        31.       MI32TOF32 MRa, mem32
        32.       MI32TOF32 MRa, MRb
        33.       MLSL32 MRa, #SHIFT
        34.       MLSR32 MRa, #SHIFT
        35.       MMACF32 MR3, MR2, MRd, MRe, MRf ||MMOV32 MRa, mem32
        36.       MMAXF32 MRa, MRb
        37.       MMAXF32 MRa, #16FHi
        38.       MMINF32 MRa, MRb
        39.       MMINF32 MRa, #16FHi
        40.       MMOV16 MARx, MRa, #16I
        41.       MMOV16 MARx, mem16
        42.       MMOV16 mem16, MARx
        43.       MMOV16 mem16, MRa
        44.       MMOV32 mem32, MRa
        45.       MMOV32 mem32, MSTF
        46.       MMOV32 MRa, mem32 [, CNDF]
        47.       MMOV32 MRa, MRb [, CNDF]
        48.       MMOV32 MSTF, mem32
        49.       MMOVD32 MRa, mem32
        50.       MMOVF32 MRa, #32F
        51.       MMOVI16 MARx, #16I
        52.       MMOVI32 MRa, #32FHex
        53.       MMOVIZ MRa, #16FHi
        54.       MMOVZ16 MRa, mem16
        55.       MMOVXI MRa, #16FLoHex
        56.       MMPYF32 MRa, MRb, MRc
        57.       MMPYF32 MRa, #16FHi, MRb
        58.       MMPYF32 MRa, MRb, #16FHi
        59.       MMPYF32 MRa, MRb, MRc||MADDF32 MRd, MRe, MRf
        60.       MMPYF32 MRd, MRe, MRf ||MMOV32 MRa, mem32
        61.       MMPYF32 MRd, MRe, MRf ||MMOV32 mem32, MRa
        62.       MMPYF32 MRa, MRb, MRc ||MSUBF32 MRd, MRe, MRf
        63.       MNEGF32 MRa, MRb[, CNDF]
        64.       MNOP
        65.       MOR32 MRa, MRb, MRc
        66.       MRCNDD [CNDF]
        67.       MSETC BGINTM
        68.       MSETFLG FLAG, VALUE
        69.       MSTOP
        70.       MSUB32 MRa, MRb, MRc
        71.       MSUBF32 MRa, MRb, MRc
        72.       MSUBF32 MRa, #16FHi, MRb
        73.       MSUBF32 MRd, MRe, MRf ||MMOV32 MRa, mem32
        74.       MSUBF32 MRd, MRe, MRf ||MMOV32 mem32, MRa
        75.       MSWAPF MRa, MRb [, CNDF]
        76.       MTESTTF CNDF
        77.       MUI16TOF32 MRa, mem16
        78.       MUI16TOF32 MRa, MRb
        79.       MUI32TOF32 MRa, mem32
        80.       MUI32TOF32 MRa, MRb
        81.       MXOR32 MRa, MRb, MRc
    8. 7.8 CLA Registers
      1. 7.8.1 CLA Base Address Table
      2. 7.8.2 CLA_ONLY_REGS Registers
      3. 7.8.3 CLA_SOFTINT_REGS Registers
      4. 7.8.4 CLA_REGS Registers
      5. 7.8.5 CLA Registers to Driverlib Functions
  10. 8 Configurable Logic Block (CLB)
    1. 8.1  Introduction
      1. 8.1.1 CLB Related Collateral
    2. 8.2  Description
      1. 8.2.1 CLB Clock
    3. 8.3  CLB Input/Output Connection
      1. 8.3.1 Overview
      2. 8.3.2 CLB Input Selection
      3. 8.3.3 CLB Output Selection
      4. 8.3.4 CLB Output Signal Multiplexer
    4. 8.4  CLB Tile
      1. 8.4.1 Static Switch Block
      2. 8.4.2 Counter Block
        1. 8.4.2.1 Counter Description
        2. 8.4.2.2 Counter Operation
        3. 8.4.2.3 Serializer Mode
        4. 8.4.2.4 Linear Feedback Shift Register (LFSR) Mode
      3. 8.4.3 FSM Block
      4. 8.4.4 LUT4 Block
      5. 8.4.5 Output LUT Block
      6. 8.4.6 Asynchronous Output Conditioning (AOC) Block
      7. 8.4.7 High Level Controller (HLC)
        1. 8.4.7.1 High Level Controller Events
        2. 8.4.7.2 High Level Controller Instructions
        3. 8.4.7.3 <Src> and <Dest>
        4. 8.4.7.4 Operation of the PUSH and PULL Instructions (Overflow and Underflow Detection)
    5. 8.5  CPU Interface
      1. 8.5.1 Register Description
      2. 8.5.2 Non-Memory Mapped Registers
    6. 8.6  DMA Access
    7. 8.7  CLB Data Export Through SPI RX Buffer
    8. 8.8  CLB Pipeline Mode
    9. 8.9  Software
      1. 8.9.1 CLB Examples
        1. 8.9.1.1  CLB Empty Project
        2. 8.9.1.2  CLB Combinational Logic
        3. 8.9.1.3  CLB GPIO Input Filter
        4. 8.9.1.4  CLB Auxilary PWM
        5. 8.9.1.5  CLB PWM Protection
        6. 8.9.1.6  CLB Event Window
        7. 8.9.1.7  CLB Signal Generator
        8. 8.9.1.8  CLB State Machine
        9. 8.9.1.9  CLB External Signal AND Gate
        10. 8.9.1.10 CLB Timer
        11. 8.9.1.11 CLB Timer Two States
        12. 8.9.1.12 CLB Interrupt Tag
        13. 8.9.1.13 CLB Output Intersect
        14. 8.9.1.14 CLB PUSH PULL
        15. 8.9.1.15 CLB Multi Tile
        16. 8.9.1.16 CLB Tile to Tile Delay
        17. 8.9.1.17 CLB Glue Logic
        18. 8.9.1.18 CLB based One-shot PWM
        19. 8.9.1.19 CLB AOC Control
        20. 8.9.1.20 CLB AOC Release Control
        21. 8.9.1.21 CLB XBARs
        22. 8.9.1.22 CLB AOC Control
        23. 8.9.1.23 CLB Serializer
        24. 8.9.1.24 CLB LFSR
        25. 8.9.1.25 CLB Lock Output Mask
        26. 8.9.1.26 CLB INPUT Pipeline Mode
        27. 8.9.1.27 CLB Clocking and PIPELINE Mode
        28. 8.9.1.28 CLB SPI Data Export
        29. 8.9.1.29 CLB SPI Data Export DMA
        30. 8.9.1.30 CLB Trip Zone Timestamp
        31. 8.9.1.31 CLB CRC
        32. 8.9.1.32 CLB TDM Serial Port
        33. 8.9.1.33 CLB LED Driver
    10. 8.10 CLB Registers
      1. 8.10.1 CLB Base Address Table
      2. 8.10.2 CLB_LOGIC_CONFIG_REGS Registers
      3. 8.10.3 CLB_LOGIC_CONTROL_REGS Registers
      4. 8.10.4 CLB_DATA_EXCHANGE_REGS Registers
      5. 8.10.5 CLB Registers to Driverlib Functions
  11. 9 Dual-Clock Comparator (DCC)
    1. 9.1 Introduction
      1. 9.1.1 Features
      2. 9.1.2 Block Diagram
    2. 9.2 Module Operation
      1. 9.2.1 Configuring DCC Counters
      2. 9.2.2 Single-Shot Measurement Mode
      3. 9.2.3 Continuous Monitoring Mode
      4. 9.2.4 Error Conditions
    3. 9.3 Interrupts
    4. 9.4 Software
      1. 9.4.1 DCC Examples
        1. 9.4.1.1 DCC Single shot Clock verification - SINGLE_CORE
        2. 9.4.1.2 DCC Single shot Clock measurement - SINGLE_CORE
        3. 9.4.1.3 DCC Continuous clock monitoring - SINGLE_CORE
    5. 9.5 DCC Registers
      1. 9.5.1 DCC Base Address Table
      2. 9.5.2 DCC_REGS Registers
      3. 9.5.3 DCC Registers to Driverlib Functions
  12. 10Direct Memory Access (DMA)
    1. 10.1 Introduction
      1. 10.1.1 Features
      2. 10.1.2 Block Diagram
    2. 10.2 Architecture
      1. 10.2.1 Peripheral Interrupt Event Trigger Sources
      2. 10.2.2 DMA Bus
    3. 10.3 Address Pointer and Transfer Control
    4. 10.4 Pipeline Timing and Throughput
    5. 10.5 CPU and CLA Arbitration
    6. 10.6 Channel Priority
      1. 10.6.1 Round-Robin Mode
      2. 10.6.2 Channel 1 High-Priority Mode
    7. 10.7 Overrun Detection Feature
    8. 10.8 Software
      1. 10.8.1 DMA Examples
        1. 10.8.1.1 DMA GSRAM Transfer (dma_ex1_gsram_transfer)
        2. 10.8.1.2 DMA Transfer Shared Peripheral - C28X_DUAL
        3. 10.8.1.3 DMA Transfer for Shared Peripheral Example (CPU2) - C28X_DUAL
        4. 10.8.1.4 DMA GSRAM Transfer (dma_ex2_gsram_transfer)
    9. 10.9 DMA Registers
      1. 10.9.1 DMA Base Address Table
      2. 10.9.2 DMA_REGS Registers
      3. 10.9.3 DMA_CH_REGS Registers
      4. 10.9.4 DMA_CLA_SRC_SEL_REGS Registers
      5. 10.9.5 DMA Registers to Driverlib Functions
  13. 11External Memory Interface (EMIF)
    1. 11.1 Introduction
      1. 11.1.1 Purpose of the Peripheral
      2. 11.1.2 EMIF Related Collateral
      3. 11.1.3 Features
        1. 11.1.3.1 Asynchronous Memory Support
        2. 11.1.3.2 Synchronous DRAM Memory Support
      4. 11.1.4 Functional Block Diagram
      5. 11.1.5 Configuring Device Pins
    2. 11.2 EMIF Module Architecture
      1. 11.2.1  EMIF Clock Control
      2. 11.2.2  EMIF Requests
      3. 11.2.3  EMIF Signal Descriptions
      4. 11.2.4  EMIF Signal Multiplexing Control
      5. 11.2.5  SDRAM Controller and Interface
        1. 11.2.5.1  SDRAM Commands
        2. 11.2.5.2  Interfacing to SDRAM
        3. 11.2.5.3  SDRAM Configuration Registers
        4. 11.2.5.4  SDRAM Auto-Initialization Sequence
        5. 11.2.5.5  SDRAM Configuration Procedure
        6. 11.2.5.6  EMIF Refresh Controller
          1. 11.2.5.6.1 Determining the Appropriate Value for the RR Field
        7. 11.2.5.7  Self-Refresh Mode
        8. 11.2.5.8  Power-Down Mode
        9. 11.2.5.9  SDRAM Read Operation
        10. 11.2.5.10 SDRAM Write Operations
        11. 11.2.5.11 Mapping from Logical Address to EMIF Pins
      6. 11.2.6  Asynchronous Controller and Interface
        1. 11.2.6.1 Interfacing to Asynchronous Memory
        2. 11.2.6.2 Accessing Larger Asynchronous Memories
        3. 11.2.6.3 Configuring EMIF for Asynchronous Accesses
        4. 11.2.6.4 Read and Write Operations in Normal Mode
          1. 11.2.6.4.1 Asynchronous Read Operations (Normal Mode)
          2. 11.2.6.4.2 Asynchronous Write Operations (Normal Mode)
        5. 11.2.6.5 Read and Write Operation in Select Strobe Mode
          1. 11.2.6.5.1 Asynchronous Read Operations (Select Strobe Mode)
          2. 11.2.6.5.2 Asynchronous Write Operations (Select Strobe Mode)
        6. 11.2.6.6 Extended Wait Mode and the EM1WAIT Pin
      7. 11.2.7  Data Bus Parking
      8. 11.2.8  Reset and Initialization Considerations
      9. 11.2.9  Interrupt Support
        1. 11.2.9.1 Interrupt Events
      10. 11.2.10 DMA Event Support
      11. 11.2.11 EMIF Signal Multiplexing
      12. 11.2.12 Memory Map
      13. 11.2.13 Priority and Arbitration
      14. 11.2.14 System Considerations
        1. 11.2.14.1 Asynchronous Request Times
      15. 11.2.15 Power Management
        1. 11.2.15.1 Power Management Using Self-Refresh Mode
        2. 11.2.15.2 Power Management Using Power Down Mode
      16. 11.2.16 Emulation Considerations
    3. 11.3 Example Configuration
      1. 11.3.1 Hardware Interface
      2. 11.3.2 Software Configuration
        1. 11.3.2.1 Configuring the SDRAM Interface
          1. 11.3.2.1.1 PLL Programming for EMIF to K4S641632H-TC(L)70 Interface
          2. 11.3.2.1.2 SDRAM Timing Register (SDRAM_TR) Settings for EMIF to K4S641632H-TC(L)70 Interface
          3. 11.3.2.1.3 SDRAM Self Refresh Exit Timing Register (SDR_EXT_TMNG) Settings for EMIF to K4S641632H-TC(L)70 Interface
          4. 11.3.2.1.4 SDRAM Refresh Control Register (SDRAM_RCR) Settings for EMIF to K4S641632H-TC(L)70 Interface
          5. 11.3.2.1.5 SDRAM Configuration Register (SDRAM_CR) Settings for EMIF to K4S641632H-TC(L)70 Interface
        2. 11.3.2.2 Configuring the Flash Interface
          1. 11.3.2.2.1 Asynchronous 1 Configuration Register (ASYNC_CS2_CFG) Settings for EMIF to LH28F800BJE-PTTL90 Interface
    4. 11.4 Software
      1. 11.4.1 EMIF Examples
        1. 11.4.1.1 Pin setup for EMIF module accessing ASRAM.
        2. 11.4.1.2 EMIF1 ASYNC module accessing 16bit ASRAM.
        3. 11.4.1.3 EMIF1 module accessing 16bit ASRAM as code memory.
        4. 11.4.1.4 EMIF1 module accessing 16bit SDRAM using memcpy_fast_far().
        5. 11.4.1.5 EMIF1 module accessing 16bit SDRAM then puts into Self Refresh mode before entering Low Power Mode.
        6. 11.4.1.6 EMIF1 module accessing 32bit SDRAM using DMA.
        7. 11.4.1.7 EMIF1 module accessing 16bit SDRAM using alternate address mapping.
    5. 11.5 EMIF Registers
      1. 11.5.1 EMIF Base Address Table
      2. 11.5.2 EMIF_REGS Registers
      3. 11.5.3 EMIF1_CONFIG_REGS Registers
      4. 11.5.4 EMIF Registers to Driverlib Functions
  14. 12Flash Module
    1. 12.1  Introduction to Flash and OTP Memory
      1. 12.1.1 FLASH Related Collateral
      2. 12.1.2 Features
      3. 12.1.3 Flash Tools
      4. 12.1.4 Default Flash Configuration
    2. 12.2  Flash Bank, OTP, and Pump
    3. 12.3  Flash Wrapper
    4. 12.4  Flash and OTP Memory Performance
    5. 12.5  Flash Read Interface
      1. 12.5.1 C28x-Flash Read Interface
        1. 12.5.1.1 Standard Read Mode
        2. 12.5.1.2 Prefetch Mode
        3. 12.5.1.3 Data Cache
        4. 12.5.1.4 Flash Read Operation
    6. 12.6  Flash Erase and Program
      1. 12.6.1 Flash Controller Access Semaphore
      2. 12.6.2 Erase
      3. 12.6.3 Program
      4. 12.6.4 Verify
    7. 12.7  Error Correction Code (ECC) Protection
      1. 12.7.1 Single-Bit Data Error
      2. 12.7.2 Uncorrectable Error
      3. 12.7.3 Mechanism to Check the Correctness of ECC Logic
    8. 12.8  Reserved Locations Within Flash and OTP
    9. 12.9  Migrating an Application from RAM to Flash
    10. 12.10 Procedure to Change the Flash Control Registers
    11. 12.11 Software
      1. 12.11.1 FLASH Examples
        1. 12.11.1.1 Flash Programming with 512-bit AutoECC, DataAndECC, DataOnly and EccOnly - C28X_DUAL
        2. 12.11.1.2 Flash Programming with AutoECC, DataAndECC, DataOnly and EccOnly - C28X_DUAL
        3. 12.11.1.3 Flash Programming with 512-bit AutoECC, DataAndECC, DataOnly and EccOnly - C28X_DUAL
        4. 12.11.1.4 Flash Programming with AutoECC, DataAndECC, DataOnly and EccOnly - C28X_DUAL
    12. 12.12 Flash Registers
      1. 12.12.1 FLASH Base Address Table
      2. 12.12.2 FLASH_CTRL_REGS Registers
      3. 12.12.3 FLASH_ECC_REGS Registers
      4. 12.12.4 FLASH Registers to Driverlib Functions
  15. 13Embedded Real-time Analysis and Diagnostic (ERAD)
    1. 13.1 Introduction
      1. 13.1.1 ERAD Related Collateral
    2. 13.2 Enhanced Bus Comparator Unit
      1. 13.2.1 Enhanced Bus Comparator Unit Operations
      2. 13.2.2 Event Masking and Exporting
    3. 13.3 System Event Counter Unit
      1. 13.3.1 System Event Counter Modes
        1. 13.3.1.1 Counting Active Levels Versus Edges
        2. 13.3.1.2 Max Mode
        3. 13.3.1.3 Cumulative Mode
        4. 13.3.1.4 Input Signal Selection
      2. 13.3.2 Reset on Event
      3. 13.3.3 Operation Conditions
    4. 13.4 ERAD Ownership, Initialization and Reset
    5. 13.5 ERAD Programming Sequence
      1. 13.5.1 Hardware Breakpoint and Hardware Watch Point Programming Sequence
      2. 13.5.2 Timer and Counter Programming Sequence
    6. 13.6 Cyclic Redundancy Check Unit
      1. 13.6.1 CRC Unit Qualifier
      2. 13.6.2 CRC Unit Programming Sequence
    7. 13.7 Program Counter Trace
      1. 13.7.1 Functional Block Diagram
      2. 13.7.2 Trace Qualification Modes
      3. 13.7.3 Trace Memory
      4. 13.7.4 Trace Input Signal Conditioning
      5. 13.7.5 PC Trace Software Operation
      6. 13.7.6 Trace Operation in Debug Mode
    8. 13.8 Software
      1. 13.8.1 ERAD Examples
        1. 13.8.1.1  ERAD Profiling Interrupts
        2. 13.8.1.2  ERAD Profile Function
        3. 13.8.1.3  ERAD Profile Function
        4. 13.8.1.4  ERAD HWBP Monitor Program Counter
        5. 13.8.1.5  ERAD HWBP Monitor Program Counter
        6. 13.8.1.6  ERAD Profile Function
        7. 13.8.1.7  ERAD HWBP Stack Overflow Detection
        8. 13.8.1.8  ERAD HWBP Stack Overflow Detection
        9. 13.8.1.9  ERAD Stack Overflow
        10. 13.8.1.10 ERAD Profile Interrupts CLA
        11. 13.8.1.11 ERAD Profiling Interrupts
        12. 13.8.1.12 ERAD Profiling Interrupts
        13. 13.8.1.13 ERAD MEMORY ACCESS RESTRICT
        14. 13.8.1.14 ERAD INTERRUPT ORDER
        15. 13.8.1.15 ERAD AND CLB
        16. 13.8.1.16 ERAD PWM PROTECTION
    9. 13.9 ERAD Registers
      1. 13.9.1 ERAD Base Address Table
      2. 13.9.2 ERAD_GLOBAL_REGS Registers
      3. 13.9.3 ERAD_HWBP_REGS Registers
      4. 13.9.4 ERAD_COUNTER_REGS Registers
      5. 13.9.5 ERAD_CRC_GLOBAL_REGS Registers
      6. 13.9.6 ERAD_CRC_REGS Registers
      7. 13.9.7 PCTRACE_REGS Registers
      8. 13.9.8 PCTRACE_BUFFER_REGS Registers
      9. 13.9.9 ERAD Registers to Driverlib Functions
  16. 14General-Purpose Input/Output (GPIO)
    1. 14.1  Introduction
      1. 14.1.1 GPIO Related Collateral
    2. 14.2  Configuration Overview
    3. 14.3  Digital Inputs on ADC Pins (AIOs)
    4. 14.4  Digital Inputs and Outputs on ADC Pins (AGPIOs)
    5. 14.5  Digital General-Purpose I/O Control
    6. 14.6  Input Qualification
      1. 14.6.1 No Synchronization (Asynchronous Input)
      2. 14.6.2 Synchronization to SYSCLKOUT Only
      3. 14.6.3 Qualification Using a Sampling Window
    7. 14.7  USB Signals
    8. 14.8  GPIO and Peripheral Muxing
      1. 14.8.1 GPIO Muxing
      2. 14.8.2 Peripheral Muxing
    9. 14.9  Internal Pullup Configuration Requirements
    10. 14.10 Software
      1. 14.10.1 GPIO Examples
        1. 14.10.1.1 Device GPIO Toggle - SINGLE_CORE
        2. 14.10.1.2 XINT/XBAR example - SINGLE_CORE
      2. 14.10.2 LED Examples
        1. 14.10.2.1 LED Blinky Example - MULTI_CORE
        2. 14.10.2.2 LED Blinky Example (CPU1,CPU3) - MULTI_CORE
        3. 14.10.2.3 LED Blinky example - SINGLE_CORE
        4. 14.10.2.4 LED Blinky Example (CPU1|CPU2|CPU3) - MULTI_CORE
        5. 14.10.2.5 LED Blinky Example (CPU2) - MULTI_CORE
        6. 14.10.2.6 LED Blinky Example (CPU3) - MULTI_CORE
    11. 14.11 GPIO Registers
      1. 14.11.1 GPIO Base Address Table
      2. 14.11.2 GPIO_CTRL_REGS Registers
      3. 14.11.3 GPIO_DATA_REGS Registers
      4. 14.11.4 GPIO_DATA_READ_REGS Registers
      5. 14.11.5 GPIO Registers to Driverlib Functions
  17. 15Interprocessor Communication (IPC)
    1. 15.1 Introduction
    2. 15.2 Message RAMs
    3. 15.3 IPC Flags and Interrupts
    4. 15.4 IPC Command Registers
    5. 15.5 Free-Running Counter
    6. 15.6 IPC Communication Protocol
    7. 15.7 Software
      1. 15.7.1 IPC Examples
        1. 15.7.1.1 IPC basic message passing example with interrupt - MULTI_CORE
        2. 15.7.1.2 IPC basic message passing example with interrupt - MULTI_CORE
        3. 15.7.1.3 IPC basic message passing example with interrupt - MULTI_CORE
        4. 15.7.1.4 IPC basic message passing example with interrupt - MULTI_CORE
    8. 15.8 IPC Registers
      1. 15.8.1 IPC Base Address Table
      2. 15.8.2 CPU1TOCPU2_IPC_REGS_CPU1VIEW Registers
      3. 15.8.3 CPU1TOCPU2_IPC_REGS_CPU2VIEW Registers
      4. 15.8.4 IPC Registers to Driverlib Functions
  18. 16Crossbar (X-BAR)
    1. 16.1 Input X-BAR, ICL XBAR, MINDB XBAR, and CLB Input X-BAR
      1. 16.1.1 CLB Input X-BAR
      2. 16.1.2 ICL and MINDB X-BAR
    2. 16.2 ePWM , CLB, and GPIO Output X-BAR
      1. 16.2.1 ePWM X-BAR
        1. 16.2.1.1 ePWM X-BAR Architecture
      2. 16.2.2 CLB X-BAR
        1. 16.2.2.1 CLB X-BAR Architecture
      3. 16.2.3 GPIO Output X-BAR
        1. 16.2.3.1 GPIO Output X-BAR Architecture
      4. 16.2.4 CLB Output X-BAR
        1. 16.2.4.1 CLB Output X-BAR Architecture
      5. 16.2.5 X-BAR Flags
    3. 16.3 XBAR Registers
      1. 16.3.1  XBAR Base Address Table
      2. 16.3.2  EPWM_XBAR_REGS Registers
      3. 16.3.3  INPUT_XBAR_REGS Registers
      4. 16.3.4  XBAR_REGS Registers
      5. 16.3.5  MINDB_XBAR_REGS Registers
      6. 16.3.6  ICL_XBAR_REGS Registers
      7. 16.3.7  CLB_XBAR_REGS Registers
      8. 16.3.8  OUTPUT_XBAR_EXT64_REGS Registers
      9. 16.3.9  OUTPUT_XBAR_REGS Registers
      10. 16.3.10 Register to Driverlib Function Mapping
        1. 16.3.10.1 EPWMXBAR Registers to Driverlib Functions
        2. 16.3.10.2 INPUTXBAR Registers to Driverlib Functions
        3. 16.3.10.3 XBAR Registers to Driverlib Functions
        4. 16.3.10.4 MINDBXBAR Registers to Driverlib Functions
        5. 16.3.10.5 ICLXBAR Registers to Driverlib Functions
        6. 16.3.10.6 CLBXBAR Registers to Driverlib Functions
        7. 16.3.10.7 OUTPUTXBAR Registers to Driverlib Functions
  19. 17Analog Subsystem
    1. 17.1 Introduction
      1. 17.1.1 Features
      2. 17.1.2 Block Diagram
    2. 17.2 Optimizing Power-Up Time
    3. 17.3 Digital Inputs on ADC Pins (AIOs)
    4. 17.4 Digital Inputs and Outputs on ADC Pins (AGPIOs)
    5. 17.5 Analog Subsystem Registers
      1. 17.5.1 ASBSYS Base Address Table
      2. 17.5.2 ANALOG_SUBSYS_REGS Registers
  20. 18Analog-to-Digital Converter (ADC)
    1. 18.1  Introduction
      1. 18.1.1 ADC Related Collateral
      2. 18.1.2 Features
      3. 18.1.3 Block Diagram
    2. 18.2  ADC Configurability
      1. 18.2.1 Clock Configuration
      2. 18.2.2 Resolution
      3. 18.2.3 Voltage Reference
        1. 18.2.3.1 External Reference Mode
        2. 18.2.3.2 Internal Reference Mode
        3. 18.2.3.3 Ganged References
        4. 18.2.3.4 Selecting Reference Mode
      4. 18.2.4 Signal Mode
      5. 18.2.5 Expected Conversion Results
      6. 18.2.6 Interpreting Conversion Results
    3. 18.3  SOC Principle of Operation
      1. 18.3.1 SOC Configuration
      2. 18.3.2 Trigger Operation
        1. 18.3.2.1 Global Software Trigger
        2. 18.3.2.2 Trigger Repeaters
          1. 18.3.2.2.1 Oversampling Mode
          2. 18.3.2.2.2 Undersampling Mode
          3. 18.3.2.2.3 Trigger Phase Delay
          4. 18.3.2.2.4 Re-trigger Spread
          5. 18.3.2.2.5 Trigger Repeater Configuration
            1. 18.3.2.2.5.1 Register Shadow Updates
          6. 18.3.2.2.6 Re-Trigger Logic
          7. 18.3.2.2.7 Multi-Path Triggering Behavior
      3. 18.3.3 ADC Acquisition (Sample and Hold) Window
      4. 18.3.4 ADC Input Models
      5. 18.3.5 Channel Selection
        1. 18.3.5.1 External Channel Selection
          1. 18.3.5.1.1 External Channel Selection Timing
    4. 18.4  SOC Configuration Examples
      1. 18.4.1 Single Conversion from ePWM Trigger
      2. 18.4.2 Oversampled Conversion from ePWM Trigger
      3. 18.4.3 Multiple Conversions from CPU Timer Trigger
      4. 18.4.4 Software Triggering of SOCs
    5. 18.5  ADC Conversion Priority
    6. 18.6  Burst Mode
      1. 18.6.1 Burst Mode Example
      2. 18.6.2 Burst Mode Priority Example
    7. 18.7  EOC and Interrupt Operation
      1. 18.7.1 Interrupt Overflow
      2. 18.7.2 Continue to Interrupt Mode
      3. 18.7.3 Early Interrupt Configuration Mode
    8. 18.8  Post-Processing Blocks
      1. 18.8.1 PPB Offset Correction
      2. 18.8.2 PPB Error Calculation
      3. 18.8.3 PPB Limit Detection and Zero-Crossing Detection
      4. 18.8.4 PPB Sample Delay Capture
      5. 18.8.5 PPB Oversampling
        1. 18.8.5.1 Accumulation, Minimum, Maximum, and Average Functions
        2. 18.8.5.2 Outlier Rejection
    9. 18.9  Result Safety Checker
      1. 18.9.1 Result Safety Checker Operation
      2. 18.9.2 Result Safety Checker Interrupts and Events
    10. 18.10 Opens/Shorts Detection Circuit (OSDETECT)
      1. 18.10.1 Implementation
      2. 18.10.2 Detecting an Open Input Pin
      3. 18.10.3 Detecting a Shorted Input Pin
    11. 18.11 Power-Up Sequence
    12. 18.12 ADC Calibration
      1. 18.12.1 ADC Zero Offset Calibration
    13. 18.13 ADC Timings
      1. 18.13.1 ADC Timing Diagrams
      2. 18.13.2 Post-Processing Block Timings
    14. 18.14 Additional Information
      1. 18.14.1 Ensuring Synchronous Operation
        1. 18.14.1.1 Basic Synchronous Operation
        2. 18.14.1.2 Synchronous Operation with Multiple Trigger Sources
        3. 18.14.1.3 Synchronous Operation with Uneven SOC Numbers
        4. 18.14.1.4 Synchronous Operation with Different Resolutions
        5. 18.14.1.5 Non-overlapping Conversions
      2. 18.14.2 Choosing an Acquisition Window Duration
      3. 18.14.3 Achieving Simultaneous Sampling
      4. 18.14.4 Result Register Mapping
      5. 18.14.5 Internal Temperature Sensor
      6. 18.14.6 Designing an External Reference Circuit
      7. 18.14.7 ADC-DAC Loopback Testing
      8. 18.14.8 Internal Test Mode
      9. 18.14.9 ADC Gain and Offset Calibration
    15. 18.15 Software
      1. 18.15.1 ADC Examples
        1. 18.15.1.1  ADC Software Triggering - SINGLE_CORE
        2. 18.15.1.2  ADC ePWM Triggering - SINGLE_CORE
        3. 18.15.1.3  ADC Temperature Sensor Conversion - SINGLE_CORE
        4. 18.15.1.4  ADC Synchronous SOC Software Force (adc_soc_software_sync) - SINGLE_CORE
        5. 18.15.1.5  ADC Continuous Triggering (adc_soc_continuous) - SINGLE_CORE
        6. 18.15.1.6  ADC Continuous Conversions Read by DMA (adc_soc_continuous_dma) - SINGLE_CORE
        7. 18.15.1.7  ADC PPB Offset (adc_ppb_offset) - SINGLE_CORE
        8. 18.15.1.8  ADC PPB Limits (adc_ppb_limits) - SINGLE_CORE
        9. 18.15.1.9  ADC PPB Delay Capture (adc_ppb_delay) - SINGLE_CORE
        10. 18.15.1.10 ADC ePWM Triggering Multiple SOC - SINGLE_CORE
        11. 18.15.1.11 ADC Burst Mode - SINGLE_CORE
        12. 18.15.1.12 ADC Burst Mode Oversampling - SINGLE_CORE
        13. 18.15.1.13 ADC SOC Oversampling - SINGLE_CORE
        14. 18.15.1.14 ADC PPB PWM trip (adc_ppb_pwm_trip) - SINGLE_CORE
        15. 18.15.1.15 ADC Trigger Repeater Oversampling - SINGLE_CORE
        16. 18.15.1.16 ADC Trigger Repeater Undersampling - SINGLE_CORE
        17. 18.15.1.17 ADC Safety Checker - SINGLE_CORE
    16. 18.16 ADC Registers
      1. 18.16.1 ADC Base Address Table
      2. 18.16.2 ADC_RESULT_REGS Registers
      3. 18.16.3 ADC_REGS Registers
      4. 18.16.4 ADC_SAFECHECK_INTEVT_REGS Registers
      5. 18.16.5 ADC_SAFECHECK_REGS Registers
      6. 18.16.6 ADC Registers to Driverlib Functions
  21. 19Buffered Digital-to-Analog Converter (DAC)
    1. 19.1 Introduction
      1. 19.1.1 DAC Related Collateral
      2. 19.1.2 Features
      3. 19.1.3 Block Diagram
    2. 19.2 Using the DAC
      1. 19.2.1 Initialization Sequence
      2. 19.2.2 DAC Offset Adjustment
      3. 19.2.3 EPWMSYNCPER Signal
    3. 19.3 Lock Registers
    4. 19.4 Software
      1. 19.4.1 DAC Examples
        1. 19.4.1.1 Buffered DAC Enable - SINGLE_CORE
        2. 19.4.1.2 Buffered DAC Random - SINGLE_CORE
    5. 19.5 DAC Registers
      1. 19.5.1 DAC Base Address Table
      2. 19.5.2 DAC_REGS Registers
      3. 19.5.3 DAC Registers to Driverlib Functions
  22. 20Comparator Subsystem (CMPSS)
    1. 20.1 Introduction
      1. 20.1.1 CMPSS Related Collateral
      2. 20.1.2 Features
      3. 20.1.3 Block Diagram
    2. 20.2 Comparator
    3. 20.3 Reference DAC
    4. 20.4 Ramp Generator
      1. 20.4.1 Ramp Generator Overview
      2. 20.4.2 Ramp Generator Behavior
      3. 20.4.3 Ramp Generator Behavior at Corner Cases
    5. 20.5 Digital Filter
      1. 20.5.1 Filter Initialization Sequence
    6. 20.6 Using the CMPSS
      1. 20.6.1 LATCHCLR, EPWMSYNCPER, and EPWMBLANK Signals
      2. 20.6.2 Synchronizer, Digital Filter, and Latch Delays
      3. 20.6.3 Calibrating the CMPSS
      4. 20.6.4 Enabling and Disabling the CMPSS Clock
    7. 20.7 Software
      1. 20.7.1 CMPSS Examples
        1. 20.7.1.1 CMPSS Asynchronous Trip - SINGLE_CORE
        2. 20.7.1.2 CMPSS Digital Filter Configuration - SINGLE_CORE
    8. 20.8 CMPSS Registers
      1. 20.8.1 CMPSS Base Address Table
      2. 20.8.2 CMPSS_REGS Registers
      3. 20.8.3 CMPSS Registers to Driverlib Functions
  23. 21Enhanced Capture (eCAP) and High Resolution Capture (HRCAP)
    1. 21.1  Introduction
      1. 21.1.1 Features
      2. 21.1.2 ECAP Related Collateral
    2. 21.2  Description
    3. 21.3  Configuring Device Pins for the eCAP
    4. 21.4  Capture and APWM Operating Mode
    5. 21.5  Capture Mode Description
      1. 21.5.1  Event Prescaler
      2. 21.5.2  Glitch Filter
      3. 21.5.3  Edge Polarity Select and Qualifier
      4. 21.5.4  Continuous/One-Shot Control
      5. 21.5.5  32-Bit Counter and Phase Control
      6. 21.5.6  CAP1-CAP4 Registers
      7. 21.5.7  eCAP Synchronization
        1. 21.5.7.1 Example 1 - Using SWSYNC with ECAP Module
      8. 21.5.8  Interrupt Control
      9. 21.5.9  DMA Interrupt
      10. 21.5.10 ADC SOC Event
      11. 21.5.11 Shadow Load and Lockout Control
      12. 21.5.12 APWM Mode Operation
      13. 21.5.13 Signal Monitoring Unit
        1. 21.5.13.1 Pulse Width and Period Monitoring
        2. 21.5.13.2 Edge Monitoring
    6. 21.6  Application of the eCAP Module
      1. 21.6.1 Example 1 - Absolute Time-Stamp Operation Rising-Edge Trigger
      2. 21.6.2 Example 2 - Absolute Time-Stamp Operation Rising- and Falling-Edge Trigger
      3. 21.6.3 Example 3 - Time Difference (Delta) Operation Rising-Edge Trigger
      4. 21.6.4 Example 4 - Time Difference (Delta) Operation Rising- and Falling-Edge Trigger
    7. 21.7  Application of the APWM Mode
      1. 21.7.1 Example 1 - Simple PWM Generation (Independent Channels)
    8. 21.8  High Resolution Capture (HRCAP) Module
      1. 21.8.1 Introduction
        1. 21.8.1.1 HRCAP Related Collateral
        2. 21.8.1.2 Features
        3. 21.8.1.3 Description
      2. 21.8.2 Operational Details
        1. 21.8.2.1 HRCAP Clocking
        2. 21.8.2.2 HRCAP Initialization Sequence
        3. 21.8.2.3 HRCAP Interrupts
        4. 21.8.2.4 HRCAP Calibration
          1. 21.8.2.4.1 Applying the Scale Factor
      3. 21.8.3 Known Exceptions
    9. 21.9  Software
      1. 21.9.1 ECAP Examples
        1. 21.9.1.1 eCAP APWM Example - SINGLE_CORE
        2. 21.9.1.2 eCAP Capture PWM Example - SINGLE_CORE
        3. 21.9.1.3 eCAP APWM Phase-shift Example - SINGLE_CORE
      2. 21.9.2 HRCAP Examples
        1. 21.9.2.1 HRCAP Capture and Calibration Example - SINGLE_CORE
    10. 21.10 eCAP Registers
      1. 21.10.1 ECAP Base Address Table
      2. 21.10.2 ECAP_REGS Registers
      3. 21.10.3 ECAP_SIGNAL_MONITORING Registers
      4. 21.10.4 ECAP Registers to Driverlib Functions
    11. 21.11 HRCAP Registers
      1. 21.11.1 HRCAP Base Address Table
      2. 21.11.2 HRCAP_REGS Registers
      3. 21.11.3 HRCAP Registers to Driverlib Functions
  24. 22Enhanced Pulse Width Modulator (ePWM)
    1. 22.1  Introduction
      1. 22.1.1 EPWM Related Collateral
      2. 22.1.2 Submodule Overview
    2. 22.2  Configuring Device Pins
    3. 22.3  ePWM Modules Overview
    4. 22.4  Time-Base (TB) Submodule
      1. 22.4.1 Purpose of the Time-Base Submodule
      2. 22.4.2 Controlling and Monitoring the Time-Base Submodule
      3. 22.4.3 Calculating PWM Period and Frequency
        1. 22.4.3.1 Time-Base Period Shadow Register
        2. 22.4.3.2 Time-Base Clock Synchronization
        3. 22.4.3.3 Time-Base Counter Synchronization
        4. 22.4.3.4 ePWM SYNC Selection
      4. 22.4.4 Phase Locking the Time-Base Clocks of Multiple ePWM Modules
      5. 22.4.5 Simultaneous Writes to TBPRD and CMPx Registers Between ePWM Modules
      6. 22.4.6 Time-Base Counter Modes and Timing Waveforms
      7. 22.4.7 Global Load
        1. 22.4.7.1 Global Load Pulse Pre-Scalar
        2. 22.4.7.2 One-Shot Load Mode
        3. 22.4.7.3 One-Shot Sync Mode
    5. 22.5  Counter-Compare (CC) Submodule
      1. 22.5.1 Purpose of the Counter-Compare Submodule
      2. 22.5.2 Controlling and Monitoring the Counter-Compare Submodule
      3. 22.5.3 Operational Highlights for the Counter-Compare Submodule
      4. 22.5.4 Count Mode Timing Waveforms
    6. 22.6  Action-Qualifier (AQ) Submodule
      1. 22.6.1 Purpose of the Action-Qualifier Submodule
      2. 22.6.2 Action-Qualifier Submodule Control and Status Register Definitions
      3. 22.6.3 Action-Qualifier Event Priority
      4. 22.6.4 AQCTLA and AQCTLB Shadow Mode Operations
      5. 22.6.5 Configuration Requirements for Common Waveforms
    7. 22.7  XCMP Complex Waveform Generator Mode
      1. 22.7.1 XCMP Allocation to CMPA and CMPB
      2. 22.7.2 XCMP Shadow Buffers
      3. 22.7.3 XCMP Operation
    8. 22.8  Dead-Band Generator (DB) Submodule
      1. 22.8.1 Purpose of the Dead-Band Submodule
      2. 22.8.2 Dead-band Submodule Additional Operating Modes
      3. 22.8.3 Operational Highlights for the Dead-Band Submodule
    9. 22.9  PWM Chopper (PC) Submodule
      1. 22.9.1 Purpose of the PWM Chopper Submodule
      2. 22.9.2 Operational Highlights for the PWM Chopper Submodule
      3. 22.9.3 Waveforms
        1. 22.9.3.1 One-Shot Pulse
        2. 22.9.3.2 Duty Cycle Control
    10. 22.10 Trip-Zone (TZ) Submodule
      1. 22.10.1 Purpose of the Trip-Zone Submodule
      2. 22.10.2 Operational Highlights for the Trip-Zone Submodule
        1. 22.10.2.1 Trip-Zone Configurations
      3. 22.10.3 Generating Trip Event Interrupts
    11. 22.11 Diode Emulation (DE) Submodule
      1. 22.11.1 DEACTIVE Mode
      2. 22.11.2 Exiting DE Mode
      3. 22.11.3 Re-Entering DE Mode
      4. 22.11.4 DE Monitor
    12. 22.12 Minimum Dead-Band (MINDB) + Illegal Combination Logic (ICL) Submodules
      1. 22.12.1 Minimum Dead-Band (MINDB)
      2. 22.12.2 Illegal Combo Logic (ICL)
    13. 22.13 Event-Trigger (ET) Submodule
      1. 22.13.1 Operational Overview of the ePWM Event-Trigger Submodule
    14. 22.14 Digital Compare (DC) Submodule
      1. 22.14.1 Purpose of the Digital Compare Submodule
      2. 22.14.2 Enhanced Trip Action Using CMPSS
      3. 22.14.3 Using CMPSS to Trip the ePWM on a Cycle-by-Cycle Basis
      4. 22.14.4 Operation Highlights of the Digital Compare Submodule
        1. 22.14.4.1 Digital Compare Events
        2. 22.14.4.2 Event Filtering
        3. 22.14.4.3 Valley Switching
        4. 22.14.4.4 Event Detection
          1. 22.14.4.4.1 Input Signal Detection
          2. 22.14.4.4.2 MIN and MAX Detection Circuit
    15. 22.15 ePWM Crossbar (X-BAR)
    16. 22.16 Applications to Power Topologies
      1. 22.16.1  Overview of Multiple Modules
      2. 22.16.2  Key Configuration Capabilities
      3. 22.16.3  Controlling Multiple Buck Converters With Independent Frequencies
      4. 22.16.4  Controlling Multiple Buck Converters With Same Frequencies
      5. 22.16.5  Controlling Multiple Half H-Bridge (HHB) Converters
      6. 22.16.6  Controlling Dual 3-Phase Inverters for Motors (ACI and PMSM)
      7. 22.16.7  Practical Applications Using Phase Control Between PWM Modules
      8. 22.16.8  Controlling a 3-Phase Interleaved DC/DC Converter
      9. 22.16.9  Controlling Zero Voltage Switched Full Bridge (ZVSFB) Converter
      10. 22.16.10 Controlling a Peak Current Mode Controlled Buck Module
      11. 22.16.11 Controlling H-Bridge LLC Resonant Converter
    17. 22.17 Register Lock Protection
    18. 22.18 High-Resolution Pulse Width Modulator (HRPWM)
      1. 22.18.1 Operational Description of HRPWM
        1. 22.18.1.1 Controlling the HRPWM Capabilities
        2. 22.18.1.2 HRPWM Source Clock
        3. 22.18.1.3 Configuring the HRPWM
        4. 22.18.1.4 Configuring High-Resolution in Deadband Rising-Edge and Falling-Edge Delay
        5. 22.18.1.5 Principle of Operation
          1. 22.18.1.5.1 Edge Positioning
          2. 22.18.1.5.2 Scaling Considerations
          3. 22.18.1.5.3 Duty Cycle Range Limitation
          4. 22.18.1.5.4 High-Resolution Period
            1. 22.18.1.5.4.1 High-Resolution Period Configuration
        6. 22.18.1.6 Deadband High-Resolution Operation
        7. 22.18.1.7 Scale Factor Optimizing Software (SFO)
        8. 22.18.1.8 HRPWM Examples Using Optimized Assembly Code
          1. 22.18.1.8.1 #Defines for HRPWM Header Files
          2. 22.18.1.8.2 Implementing a Simple Buck Converter
            1. 22.18.1.8.2.1 HRPWM Buck Converter Initialization Code
            2. 22.18.1.8.2.2 HRPWM Buck Converter Run-Time Code
          3. 22.18.1.8.3 Implementing a DAC Function Using an R+C Reconstruction Filter
            1. 22.18.1.8.3.1 PWM DAC Function Initialization Code
            2. 22.18.1.8.3.2 PWM DAC Function Run-Time Code
      2. 22.18.2 SFO Library Software - SFO_TI_Build_V8.lib
        1. 22.18.2.1 Scale Factor Optimizer Function - int SFO()
        2. 22.18.2.2 Software Usage
          1. 22.18.2.2.1 A Sample of How to Add "Include" Files
          2.        1198
          3. 22.18.2.2.2 Declaring an Element
          4.        1200
          5. 22.18.2.2.3 Initializing With a Scale Factor Value
          6.        1202
          7. 22.18.2.2.4 SFO Function Calls
    19. 22.19 Software
      1. 22.19.1 EPWM Examples
        1. 22.19.1.1  ePWM Trip Zone - SINGLE_CORE
        2. 22.19.1.2  ePWM Up Down Count Action Qualifier - SINGLE_CORE
        3. 22.19.1.3  ePWM Synchronization - SINGLE_CORE
        4. 22.19.1.4  ePWM Digital Compare - SINGLE_CORE
        5. 22.19.1.5  ePWM Digital Compare Event Filter Blanking Window - SINGLE_CORE
        6. 22.19.1.6  ePWM Valley Switching - SINGLE_CORE
        7. 22.19.1.7  ePWM Digital Compare Edge Filter - SINGLE_CORE
        8. 22.19.1.8  ePWM Deadband - SINGLE_CORE
        9. 22.19.1.9  ePWM DMA - SINGLE_CORE
        10. 22.19.1.10 ePWM Chopper - SINGLE_CORE
        11. 22.19.1.11 EPWM Configure Signal - SINGLE_CORE
        12. 22.19.1.12 Realization of Monoshot mode - SINGLE_CORE
        13. 22.19.1.13 EPWM Action Qualifier (epwm_up_aq) - SINGLE_CORE
        14. 22.19.1.14 ePWM XCMP Mode - SINGLE_CORE
        15. 22.19.1.15 ePWM Event Detection - SINGLE_CORE
      2. 22.19.2 HRPWM Examples
        1. 22.19.2.1 HRPWM Duty Control with SFO
        2. 22.19.2.2 HRPWM Slider
        3. 22.19.2.3 HRPWM Period Control
        4. 22.19.2.4 HRPWM Duty Control with UPDOWN Mode
        5. 22.19.2.5 HRPWM Slider Test
        6. 22.19.2.6 HRPWM Duty Up Count
        7. 22.19.2.7 HRPWM Period Up-Down Count
    20. 22.20 ePWM Registers
      1. 22.20.1 EPWM Base Address Table
      2. 22.20.2 EPWM_REGS Registers
      3. 22.20.3 EPWM_XCMP_REGS Registers
      4. 22.20.4 DE_REGS Registers
      5. 22.20.5 MINDB_LUT_REGS Registers
      6. 22.20.6 HRPWMCAL_REGS Registers
      7. 22.20.7 Register to Driverlib Function Mapping
        1. 22.20.7.1 EPWM Registers to Driverlib Functions
        2. 22.20.7.2 HRPWM Registers to Driverlib Functions
        3. 22.20.7.3 HRPWMCAL Registers to Driverlib Functions
  25. 23Enhanced Quadrature Encoder Pulse (eQEP)
    1. 23.1  Introduction
      1. 23.1.1 EQEP Related Collateral
    2. 23.2  Configuring Device Pins
    3. 23.3  Description
      1. 23.3.1 EQEP Inputs
      2. 23.3.2 Functional Description
      3. 23.3.3 eQEP Memory Map
    4. 23.4  Quadrature Decoder Unit (QDU)
      1. 23.4.1 Position Counter Input Modes
        1. 23.4.1.1 Quadrature Count Mode
        2. 23.4.1.2 Direction-Count Mode
        3. 23.4.1.3 Up-Count Mode
        4. 23.4.1.4 Down-Count Mode
      2. 23.4.2 eQEP Input Polarity Selection
      3. 23.4.3 Position-Compare Sync Output
    5. 23.5  Position Counter and Control Unit (PCCU)
      1. 23.5.1 Position Counter Operating Modes
        1. 23.5.1.1 Position Counter Reset on Index Event (QEPCTL[PCRM] = 00)
        2. 23.5.1.2 Position Counter Reset on Maximum Position (QEPCTL[PCRM] = 01)
        3. 23.5.1.3 Position Counter Reset on the First Index Event (QEPCTL[PCRM] = 10)
        4. 23.5.1.4 Position Counter Reset on Unit Time-out Event (QEPCTL[PCRM] = 11)
      2. 23.5.2 Position Counter Latch
        1. 23.5.2.1 Index Event Latch
        2. 23.5.2.2 Strobe Event Latch
      3. 23.5.3 Position Counter Initialization
      4. 23.5.4 eQEP Position-compare Unit
    6. 23.6  eQEP Edge Capture Unit
    7. 23.7  eQEP Watchdog
    8. 23.8  eQEP Unit Timer Base
    9. 23.9  QMA Module
      1. 23.9.1 Modes of Operation
        1. 23.9.1.1 QMA Mode-1 (QMACTRL[MODE] = 1)
        2. 23.9.1.2 QMA Mode-2 (QMACTRL[MODE] = 2)
      2. 23.9.2 Interrupt and Error Generation
    10. 23.10 eQEP Interrupt Structure
    11. 23.11 Software
      1. 23.11.1 EQEP Examples
        1. 23.11.1.1 Frequency Measurement Using eQEP via unit timeout interrupt - SINGLE_CORE
        2. 23.11.1.2 Motor speed and direction measurement using eQEP via unit timeout interrupt - SINGLE_CORE
    12. 23.12 eQEP Registers
      1. 23.12.1 EQEP Base Address Table
      2. 23.12.2 EQEP_REGS Registers
      3. 23.12.3 EQEP Registers to Driverlib Functions
  26. 24Sigma Delta Filter Module (SDFM)
    1. 24.1  Introduction
      1. 24.1.1 SDFM Related Collateral
      2. 24.1.2 Features
      3. 24.1.3 Block Diagram
    2. 24.2  Configuring Device Pins
    3. 24.3  Input Qualification
    4. 24.4  Input Control Unit
    5. 24.5  SDFM Clock Control
    6. 24.6  Sinc Filter
      1. 24.6.1 Data Rate and Latency of the Sinc Filter
    7. 24.7  Data (Primary) Filter Unit
      1. 24.7.1 32-bit or 16-bit Data Filter Output Representation
      2. 24.7.2 Data FIFO
      3. 24.7.3 SDSYNC Event
    8. 24.8  Comparator (Secondary) Filter Unit
      1. 24.8.1 Higher Threshold (HLT) Comparators
      2. 24.8.2 Lower Threshold (LLT) Comparators
      3. 24.8.3 Digital Filter
    9. 24.9  Theoretical SDFM Filter Output
    10. 24.10 Interrupt Unit
      1. 24.10.1 SDFM (SDyERR) Interrupt Sources
      2. 24.10.2 Data Ready (DRINT) Interrupt Sources
    11. 24.11 Software
      1. 24.11.1 SDFM Examples
        1. 24.11.1.1 SDFM Filter Sync CPU
        2. 24.11.1.2 SDFM Filter Sync CLA
        3. 24.11.1.3 SDFM Filter Sync DMA
        4. 24.11.1.4 SDFM PWM Sync
        5. 24.11.1.5 SDFM Type 1 Filter FIFO
        6. 24.11.1.6 SDFM Filter Sync CLA
    12. 24.12 SDFM Registers
      1. 24.12.1 SDFM Base Address Table
      2. 24.12.2 SDFM_REGS Registers
      3. 24.12.3 SDFM Registers to Driverlib Functions
  27. 25Controller Area Network (CAN)
    1. 25.1  Introduction
      1. 25.1.1 DCAN Related Collateral
      2. 25.1.2 Features
      3. 25.1.3 Block Diagram
        1. 25.1.3.1 CAN Core
        2. 25.1.3.2 Message Handler
        3. 25.1.3.3 Message RAM
        4. 25.1.3.4 Registers and Message Object Access (IFx)
    2. 25.2  Functional Description
      1. 25.2.1 Configuring Device Pins
      2. 25.2.2 Address/Data Bus Bridge
    3. 25.3  Operating Modes
      1. 25.3.1 Initialization
      2. 25.3.2 CAN Message Transfer (Normal Operation)
        1. 25.3.2.1 Disabled Automatic Retransmission
        2. 25.3.2.2 Auto-Bus-On
      3. 25.3.3 Test Modes
        1. 25.3.3.1 Silent Mode
        2. 25.3.3.2 Loopback Mode
        3. 25.3.3.3 External Loopback Mode
        4. 25.3.3.4 Loopback Combined with Silent Mode
    4. 25.4  Multiple Clock Source
    5. 25.5  Interrupt Functionality
      1. 25.5.1 Message Object Interrupts
      2. 25.5.2 Status Change Interrupts
      3. 25.5.3 Error Interrupts
      4. 25.5.4 Peripheral Interrupt Expansion (PIE) Module Nomenclature for DCAN Interrupts
      5. 25.5.5 Interrupt Topologies
    6. 25.6  DMA Functionality
    7. 25.7  Parity Check Mechanism
      1. 25.7.1 Behavior on Parity Error
    8. 25.8  Debug Mode
    9. 25.9  Module Initialization
    10. 25.10 Configuration of Message Objects
      1. 25.10.1 Configuration of a Transmit Object for Data Frames
      2. 25.10.2 Configuration of a Transmit Object for Remote Frames
      3. 25.10.3 Configuration of a Single Receive Object for Data Frames
      4. 25.10.4 Configuration of a Single Receive Object for Remote Frames
      5. 25.10.5 Configuration of a FIFO Buffer
    11. 25.11 Message Handling
      1. 25.11.1  Message Handler Overview
      2. 25.11.2  Receive/Transmit Priority
      3. 25.11.3  Transmission of Messages in Event Driven CAN Communication
      4. 25.11.4  Updating a Transmit Object
      5. 25.11.5  Changing a Transmit Object
      6. 25.11.6  Acceptance Filtering of Received Messages
      7. 25.11.7  Reception of Data Frames
      8. 25.11.8  Reception of Remote Frames
      9. 25.11.9  Reading Received Messages
      10. 25.11.10 Requesting New Data for a Receive Object
      11. 25.11.11 Storing Received Messages in FIFO Buffers
      12. 25.11.12 Reading from a FIFO Buffer
    12. 25.12 CAN Bit Timing
      1. 25.12.1 Bit Time and Bit Rate
        1. 25.12.1.1 Synchronization Segment
        2. 25.12.1.2 Propagation Time Segment
        3. 25.12.1.3 Phase Buffer Segments and Synchronization
        4. 25.12.1.4 Oscillator Tolerance Range
      2. 25.12.2 Configuration of the CAN Bit Timing
        1. 25.12.2.1 Calculation of the Bit Timing Parameters
        2. 25.12.2.2 Example for Bit Timing at High Baudrate
        3. 25.12.2.3 Example for Bit Timing at Low Baudrate
    13. 25.13 Message Interface Register Sets
      1. 25.13.1 Message Interface Register Sets 1 and 2 (IF1 and IF2)
      2. 25.13.2 Message Interface Register Set 3 (IF3)
    14. 25.14 Message RAM
      1. 25.14.1 Structure of Message Objects
      2. 25.14.2 Addressing Message Objects in RAM
      3. 25.14.3 Message RAM Representation in Debug Mode
    15. 25.15 Software
      1. 25.15.1 CAN Examples
        1. 25.15.1.1  CAN Dual Core Example - C28X_DUAL
        2. 25.15.1.2  CAN External Loopback
        3. 25.15.1.3  CAN External Loopback - C28X_DUAL
        4. 25.15.1.4  CAN External Loopback with Interrupts
        5. 25.15.1.5  CAN External Loopback with Interrupts - C28X_DUAL
        6. 25.15.1.6  CAN External Loopback with DMA
        7. 25.15.1.7  CAN Transmit and Receive Configurations
        8. 25.15.1.8  CAN Error Generation Example
        9. 25.15.1.9  CAN Remote Request Loopback
        10. 25.15.1.10 CAN example that illustrates the usage of Mask registers
    16. 25.16 CAN Registers
      1. 25.16.1 CAN Base Address Table
      2. 25.16.2 CAN_REGS Registers
      3. 25.16.3 CAN Registers to Driverlib Functions
  28. 26EtherCAT® SubordinateDevice Controller (ESC)
    1. 26.1 Introduction
      1. 26.1.1  ECAT Related Collateral
      2. 26.1.2  ESC Features
      3. 26.1.3  ESC Subsystem Integrated Features
      4. 26.1.4  F28P65x ESC versus Beckhoff ET1100
      5. 26.1.5  EtherCAT IP Block Diagram
      6. 26.1.6  ESC Functional Blocks
        1. 26.1.6.1  Interface to EtherCAT MainDevice
        2. 26.1.6.2  Process Data Interface
        3. 26.1.6.3  General-Purpose Inputs and Outputs
        4. 26.1.6.4  EtherCAT Processing Unit (EPU)
        5. 26.1.6.5  Fieldbus Memory Management Unit (FMMU)
        6. 26.1.6.6  Sync Manager
        7. 26.1.6.7  Monitoring
        8. 26.1.6.8  Reset Controller
        9. 26.1.6.9  PHY Management
        10. 26.1.6.10 Distributed Clock (DC)
        11. 26.1.6.11 EEPROM
        12. 26.1.6.12 Status / LEDs
      7. 26.1.7  EtherCAT Physical Layer
        1. 26.1.7.1 MII Interface
        2. 26.1.7.2 PHY Management Interface
          1. 26.1.7.2.1 PHY Address Configuration
          2. 26.1.7.2.2 PHY Reset Signal
          3. 26.1.7.2.3 PHY Clock
      8. 26.1.8  EtherCAT Protocol
      9. 26.1.9  EtherCAT State Machine (ESM)
      10. 26.1.10 More Information on EtherCAT
      11. 26.1.11 Beckhoff® Automation EtherCAT IP Errata
    2. 26.2 ESC and ESCSS Description
      1. 26.2.1  ESC RAM Parity and Memory Address Maps
        1. 26.2.1.1 ESC RAM Parity Logic
        2. 26.2.1.2 CPU1 and CPU2 ESC Memory Address Map
      2. 26.2.2  Local Host Communication
        1. 26.2.2.1 Byte Accessibility Through PDI
        2. 26.2.2.2 Software Details for Operation Across Clock Domains
      3. 26.2.3  Debug Emulation Mode Operation
      4. 26.2.4  ESC SubSystem
        1. 26.2.4.1 CPU1 Bus Interface
        2. 26.2.4.2 CPU2 Bus Interface
      5. 26.2.5  Interrupts and Interrupt Mapping
      6. 26.2.6  Power, Clocks, and Resets
        1. 26.2.6.1 Power
        2. 26.2.6.2 Clocking
        3. 26.2.6.3 Resets
          1. 26.2.6.3.1 Chip-Level Reset
          2. 26.2.6.3.2 EtherCAT Soft Resets
          3. 26.2.6.3.3 Reset Out (RESET_OUT)
      7. 26.2.7  LED Controls
      8. 26.2.8  SubordinateDevice Node Configuration and EEPROM
      9. 26.2.9  General-Purpose Inputs and Outputs
        1. 26.2.9.1 General-Purpose Inputs
        2. 26.2.9.2 General-Purpose Output
      10. 26.2.10 Distributed Clocks – Sync and Latch
        1. 26.2.10.1 Clock Synchronization
        2. 26.2.10.2 SYNC Signals
          1. 26.2.10.2.1 Seeking Host Intervention
        3. 26.2.10.3 LATCH Signals
          1. 26.2.10.3.1 Timestamping
        4. 26.2.10.4 Device Control and Synchronization
          1. 26.2.10.4.1 Synchronization of PWM
          2. 26.2.10.4.2 ECAP SYNC Inputs
          3. 26.2.10.4.3 SYNC Signal Conditioning and Rerouting
    3. 26.3 Software Initialization Sequence and Allocating Ownership
    4. 26.4 ESC Configuration Constants
    5. 26.5 EtherCAT IP Registers
      1. 26.5.1 ETHERCAT Base Address Table
      2. 26.5.2 ESCSS_REGS Registers
      3. 26.5.3 ESCSS_CONFIG_REGS Registers
      4. 26.5.4 ESC_SS Registers to Driverlib Functions
  29. 27Fast Serial Interface (FSI)
    1. 27.1 Introduction
      1. 27.1.1 FSI Related Collateral
      2. 27.1.2 FSI Features
    2. 27.2 System-level Integration
      1. 27.2.1 CPU Interface
      2. 27.2.2 Signal Description
        1. 27.2.2.1 Configuring Device Pins
      3. 27.2.3 FSI Interrupts
        1. 27.2.3.1 Transmitter Interrupts
        2. 27.2.3.2 Receiver Interrupts
        3. 27.2.3.3 Configuring Interrupts
        4. 27.2.3.4 Handling Interrupts
      4. 27.2.4 CLA Task Triggering
      5. 27.2.5 DMA Interface
      6. 27.2.6 External Frame Trigger Mux
    3. 27.3 FSI Functional Description
      1. 27.3.1  Introduction to Operation
      2. 27.3.2  FSI Transmitter Module
        1. 27.3.2.1 Initialization
        2. 27.3.2.2 FSI_TX Clocking
        3. 27.3.2.3 Transmitting Frames
          1. 27.3.2.3.1 Software Triggered Frames
          2. 27.3.2.3.2 Externally Triggered Frames
          3. 27.3.2.3.3 Ping Frame Generation
            1. 27.3.2.3.3.1 Automatic Ping Frames
            2. 27.3.2.3.3.2 Software Triggered Ping Frame
            3. 27.3.2.3.3.3 Externally Triggered Ping Frame
          4. 27.3.2.3.4 Transmitting Frames with DMA
        4. 27.3.2.4 Transmit Buffer Management
        5. 27.3.2.5 CRC Submodule
        6. 27.3.2.6 Conditions in Which the Transmitter Must Undergo a Soft Reset
        7. 27.3.2.7 Reset
      3. 27.3.3  FSI Receiver Module
        1. 27.3.3.1  Initialization
        2. 27.3.3.2  FSI_RX Clocking
        3. 27.3.3.3  Receiving Frames
          1. 27.3.3.3.1 Receiving Frames with DMA
        4. 27.3.3.4  Ping Frame Watchdog
        5. 27.3.3.5  Frame Watchdog
        6. 27.3.3.6  Delay Line Control
        7. 27.3.3.7  Buffer Management
        8. 27.3.3.8  CRC Submodule
        9. 27.3.3.9  Using the Zero Bits of the Receiver Tag Registers
        10. 27.3.3.10 Conditions in Which the Receiver Must Undergo a Soft Reset
        11. 27.3.3.11 FSI_RX Reset
      4. 27.3.4  Frame Format
        1. 27.3.4.1 FSI Frame Phases
        2. 27.3.4.2 Frame Types
          1. 27.3.4.2.1 Ping Frames
          2. 27.3.4.2.2 Error Frames
          3. 27.3.4.2.3 Data Frames
        3. 27.3.4.3 Multi-Lane Transmission
      5. 27.3.5  Flush Sequence
      6. 27.3.6  Internal Loopback
      7. 27.3.7  CRC Generation
      8. 27.3.8  ECC Module
      9. 27.3.9  Tag Matching
      10. 27.3.10 User Data Filtering (UDATA Matching)
      11. 27.3.11 TDM Configurations
      12. 27.3.12 FSI Trigger Generation
      13. 27.3.13 FSI-SPI Compatibility Mode
        1. 27.3.13.1 Available SPI Modes
          1. 27.3.13.1.1 FSITX as SPI Controller, Transmit Only
            1. 27.3.13.1.1.1 Initialization
            2. 27.3.13.1.1.2 Operation
          2. 27.3.13.1.2 FSIRX as SPI Peripheral, Receive Only
            1. 27.3.13.1.2.1 Initialization
            2. 27.3.13.1.2.2 Operation
          3. 27.3.13.1.3 FSITX and FSIRX Emulating a Full Duplex SPI Controller
            1. 27.3.13.1.3.1 Initialization
            2. 27.3.13.1.3.2 Operation
    4. 27.4 FSI Programing Guide
      1. 27.4.1 Establishing the Communication Link
        1. 27.4.1.1 Establishing the Communication Link from the Main Device
        2. 27.4.1.2 Establishing the Communication Link from the Remote Device
      2. 27.4.2 Register Protection
      3. 27.4.3 Emulation Mode
    5. 27.5 Software
      1. 27.5.1 FSI Examples
        1. 27.5.1.1 FSI Loopback:CPU Control - SINGLE_CORE
        2. 27.5.1.2 FSI data transfers upon CPU Timer event - SINGLE_CORE
    6. 27.6 FSI Registers
      1. 27.6.1 FSI Base Address Table
      2. 27.6.2 FSI_TX_REGS Registers
      3. 27.6.3 FSI_RX_REGS Registers
      4. 27.6.4 FSI Registers to Driverlib Functions
  30. 28Inter-Integrated Circuit Module (I2C)
    1. 28.1 Introduction
      1. 28.1.1 I2C Related Collateral
      2. 28.1.2 Features
      3. 28.1.3 Features Not Supported
      4. 28.1.4 Functional Overview
      5. 28.1.5 Clock Generation
      6. 28.1.6 I2C Clock Divider Registers (I2CCLKL and I2CCLKH)
        1. 28.1.6.1 Formula for the Controller Clock Period
    2. 28.2 Configuring Device Pins
    3. 28.3 I2C Module Operational Details
      1. 28.3.1  Input and Output Voltage Levels
      2. 28.3.2  Selecting Pullup Resistors
      3. 28.3.3  Data Validity
      4. 28.3.4  Operating Modes
      5. 28.3.5  I2C Module START and STOP Conditions
      6. 28.3.6  Non-repeat Mode versus Repeat Mode
      7. 28.3.7  Serial Data Formats
        1. 28.3.7.1 7-Bit Addressing Format
        2. 28.3.7.2 10-Bit Addressing Format
        3. 28.3.7.3 Free Data Format
        4. 28.3.7.4 Using a Repeated START Condition
      8. 28.3.8  Clock Synchronization
      9. 28.3.9  Arbitration
      10. 28.3.10 Digital Loopback Mode
      11. 28.3.11 NACK Bit Generation
    4. 28.4 Interrupt Requests Generated by the I2C Module
      1. 28.4.1 Basic I2C Interrupt Requests
      2. 28.4.2 I2C FIFO Interrupts
    5. 28.5 Resetting or Disabling the I2C Module
    6. 28.6 Software
      1. 28.6.1 I2C Examples
        1. 28.6.1.1 I2C Digital Loopback with FIFO Interrupts - SINGLE_CORE
        2. 28.6.1.2 I2C EEPROM - SINGLE_CORE
        3. 28.6.1.3 I2C Digital External Loopback with FIFO Interrupts - SINGLE_CORE
        4. 28.6.1.4 I2C Extended Clock Stretching Controller TX - SINGLE_CORE
        5. 28.6.1.5 I2C Extended Clock Stretching Target RX - SINGLE_CORE
    7. 28.7 I2C Registers
      1. 28.7.1 I2C Base Address Table
      2. 28.7.2 I2C_REGS Registers
      3. 28.7.3 I2C Registers to Driverlib Functions
  31. 29Power Management Bus Module (PMBus)
    1. 29.1 Introduction
      1. 29.1.1 PMBUS Related Collateral
      2. 29.1.2 Features
      3. 29.1.3 Block Diagram
    2. 29.2 Configuring Device Pins
    3. 29.3 Target Mode Operation
      1. 29.3.1 Configuration
      2. 29.3.2 Message Handling
        1. 29.3.2.1  Quick Command
        2. 29.3.2.2  Send Byte
        3. 29.3.2.3  Receive Byte
        4. 29.3.2.4  Write Byte and Write Word
        5. 29.3.2.5  Read Byte and Read Word
        6. 29.3.2.6  Process Call
        7. 29.3.2.7  Block Write
        8. 29.3.2.8  Block Read
        9. 29.3.2.9  Block Write-Block Read Process Call
        10. 29.3.2.10 Alert Response
        11. 29.3.2.11 Extended Command
        12. 29.3.2.12 Group Command
    4. 29.4 Controller Mode Operation
      1. 29.4.1 Configuration
      2. 29.4.2 Message Handling
        1. 29.4.2.1  Quick Command
        2. 29.4.2.2  Send Byte
        3. 29.4.2.3  Receive Byte
        4. 29.4.2.4  Write Byte and Write Word
        5. 29.4.2.5  Read Byte and Read Word
        6. 29.4.2.6  Process Call
        7. 29.4.2.7  Block Write
        8. 29.4.2.8  Block Read
        9. 29.4.2.9  Block Write-Block Read Process Call
        10. 29.4.2.10 Alert Response
        11. 29.4.2.11 Extended Command
        12. 29.4.2.12 Group Command
    5. 29.5 PMBUS Registers
      1. 29.5.1 PMBUS Base Address Table
      2. 29.5.2 PMBUS_REGS Registers
      3. 29.5.3 PMBUS Registers to Driverlib Functions
  32. 30Serial Communications Interface (SCI)
    1. 30.1  Introduction
      1. 30.1.1 Features
      2. 30.1.2 SCI Related Collateral
      3. 30.1.3 Block Diagram
    2. 30.2  Architecture
    3. 30.3  SCI Module Signal Summary
    4. 30.4  Configuring Device Pins
    5. 30.5  Multiprocessor and Asynchronous Communication Modes
    6. 30.6  SCI Programmable Data Format
    7. 30.7  SCI Multiprocessor Communication
      1. 30.7.1 Recognizing the Address Byte
      2. 30.7.2 Controlling the SCI TX and RX Features
      3. 30.7.3 Receipt Sequence
    8. 30.8  Idle-Line Multiprocessor Mode
      1. 30.8.1 Idle-Line Mode Steps
      2. 30.8.2 Block Start Signal
      3. 30.8.3 Wake-Up Temporary (WUT) Flag
        1. 30.8.3.1 Sending a Block Start Signal
      4. 30.8.4 Receiver Operation
    9. 30.9  Address-Bit Multiprocessor Mode
      1. 30.9.1 Sending an Address
    10. 30.10 SCI Communication Format
      1. 30.10.1 Receiver Signals in Communication Modes
      2. 30.10.2 Transmitter Signals in Communication Modes
    11. 30.11 SCI Port Interrupts
      1. 30.11.1 Break Detect
    12. 30.12 SCI Baud Rate Calculations
    13. 30.13 SCI Enhanced Features
      1. 30.13.1 SCI FIFO Description
      2. 30.13.2 SCI Auto-Baud
      3. 30.13.3 Autobaud-Detect Sequence
    14. 30.14 Software
      1. 30.14.1 SCI Examples
        1. 30.14.1.1 Tune Baud Rate via UART Example
        2. 30.14.1.2 SCI FIFO Digital Loop Back
        3. 30.14.1.3 SCI Digital Loop Back with Interrupts
        4. 30.14.1.4 SCI Echoback
        5. 30.14.1.5 stdout redirect example
    15. 30.15 SCI Registers
      1. 30.15.1 SCI Base Address Table
      2. 30.15.2 SCI_REGS Registers
      3. 30.15.3 SCI Registers to Driverlib Functions
  33. 31Serial Peripheral Interface (SPI)
    1. 31.1 Introduction
      1. 31.1.1 Features
      2. 31.1.2 SPI Related Collateral
      3. 31.1.3 Block Diagram
    2. 31.2 System-Level Integration
      1. 31.2.1 SPI Module Signals
      2. 31.2.2 Configuring Device Pins
        1. 31.2.2.1 GPIOs Required for High-Speed Mode
      3. 31.2.3 SPI Interrupts
      4. 31.2.4 DMA Support
    3. 31.3 SPI Operation
      1. 31.3.1  Introduction to Operation
      2. 31.3.2  Controller Mode
      3. 31.3.3  Peripheral Mode
      4. 31.3.4  Data Format
        1. 31.3.4.1 Transmission of Bit from SPIRXBUF
      5. 31.3.5  Baud Rate Selection
        1. 31.3.5.1 Baud Rate Determination
        2. 31.3.5.2 Baud Rate Calculation in Non-High Speed Mode (HS_MODE = 0)
      6. 31.3.6  SPI Clocking Schemes
      7. 31.3.7  SPI FIFO Description
      8. 31.3.8  SPI DMA Transfers
        1. 31.3.8.1 Transmitting Data Using SPI with DMA
        2. 31.3.8.2 Receiving Data Using SPI with DMA
      9. 31.3.9  SPI High-Speed Mode
      10. 31.3.10 SPI 3-Wire Mode Description
    4. 31.4 Programming Procedure
      1. 31.4.1 Initialization Upon Reset
      2. 31.4.2 Configuring the SPI
      3. 31.4.3 Configuring the SPI for High-Speed Mode
      4. 31.4.4 Data Transfer Example
      5. 31.4.5 SPI 3-Wire Mode Code Examples
        1. 31.4.5.1 3-Wire Controller Mode Transmit
        2.       1721
          1. 31.4.5.2.1 3-Wire Controller Mode Receive
        3.       1723
          1. 31.4.5.2.1 3-Wire Peripheral Mode Transmit
        4.       1725
          1. 31.4.5.2.1 3-Wire Peripheral Mode Receive
      6. 31.4.6 SPI STEINV Bit in Digital Audio Transfers
    5. 31.5 Software
      1. 31.5.1 SPI Examples
        1. 31.5.1.1 SPI Digital Loopback - SINGLE_CORE
        2. 31.5.1.2 SPI Digital Loopback with FIFO Interrupts - SINGLE_CORE
        3. 31.5.1.3 SPI Digital External Loopback without FIFO Interrupts - SINGLE_CORE
        4. 31.5.1.4 SPI Digital External Loopback with FIFO Interrupts - SINGLE_CORE
        5. 31.5.1.5 SPI Digital Loopback with DMA - SINGLE_CORE
    6. 31.6 SPI Registers
      1. 31.6.1 SPI Base Address Table
      2. 31.6.2 SPI_REGS Registers
      3. 31.6.3 SPI Registers to Driverlib Functions
  34. 32Universal Serial Bus (USB) Controller
    1. 32.1 Introduction
      1. 32.1.1 Features
      2. 32.1.2 USB Related Collateral
      3. 32.1.3 Block Diagram
        1. 32.1.3.1 Signal Description
        2. 32.1.3.2 VBus Recommendations
    2. 32.2 Functional Description
      1. 32.2.1 Operation as a Device
        1. 32.2.1.1 Control and Configurable Endpoints
          1. 32.2.1.1.1 IN Transactions as a Device
          2. 32.2.1.1.2 Out Transactions as a Device
          3. 32.2.1.1.3 Scheduling
          4. 32.2.1.1.4 Additional Actions
          5. 32.2.1.1.5 Device Mode Suspend
          6. 32.2.1.1.6 Start of Frame
          7. 32.2.1.1.7 USB Reset
          8. 32.2.1.1.8 Connect/Disconnect
      2. 32.2.2 Operation as a Host
        1. 32.2.2.1 Endpoint Registers
        2. 32.2.2.2 IN Transactions as a Host
        3. 32.2.2.3 OUT Transactions as a Host
        4. 32.2.2.4 Transaction Scheduling
        5. 32.2.2.5 USB Hubs
        6. 32.2.2.6 Babble
        7. 32.2.2.7 Host SUSPEND
        8. 32.2.2.8 USB RESET
        9. 32.2.2.9 Connect/Disconnect
      3. 32.2.3 DMA Operation
      4. 32.2.4 Address/Data Bus Bridge
    3. 32.3 Initialization and Configuration
      1. 32.3.1 Pin Configuration
      2. 32.3.2 Endpoint Configuration
    4. 32.4 USB Global Interrupts
    5. 32.5 Software
      1. 32.5.1 USB Examples
        1. 32.5.1.1  USB CDC serial example
        2. 32.5.1.2  USB HID Mouse Device
        3. 32.5.1.3  USB Device Keyboard
        4. 32.5.1.4  USB Generic Bulk Device
        5. 32.5.1.5  USB HID Mouse Host
        6. 32.5.1.6  USB HID Keyboard Host
        7. 32.5.1.7  USB Mass Storage Class Host
        8. 32.5.1.8  USB Dual Detect
        9. 32.5.1.9  USB Throughput Bulk Device Example (usb_ex9_throughput_dev_bulk)
        10. 32.5.1.10 USB HUB Host example
    6. 32.6 USB Registers
      1. 32.6.1 USB Base Address Table
      2. 32.6.2 USB_REGS Registers
      3. 32.6.3 USB Registers to Driverlib Functions
  35. 33Advanced Encryption Standard (AES) Accelerator
    1. 33.1 Introduction
      1. 33.1.1 AES Block Diagram
        1. 33.1.1.1 Interfaces
        2. 33.1.1.2 AES Subsystem
        3. 33.1.1.3 AES Wide-Bus Engine
      2. 33.1.2 AES Algorithm
    2. 33.2 AES Operating Modes
      1. 33.2.1  GCM Operation
      2. 33.2.2  CCM Operation
      3. 33.2.3  XTS Operation
      4. 33.2.4  ECB Feedback Mode
      5. 33.2.5  CBC Feedback Mode
      6. 33.2.6  CTR and ICM Feedback Modes
      7. 33.2.7  CFB Mode
      8. 33.2.8  F8 Mode
      9. 33.2.9  F9 Operation
      10. 33.2.10 CBC-MAC Operation
    3. 33.3 Extended and Combined Modes of Operations
      1. 33.3.1 GCM Protocol Operation
      2. 33.3.2 CCM Protocol Operation
      3. 33.3.3 Hardware Requests
    4. 33.4 AES Module Programming Guide
      1. 33.4.1 AES Low-Level Programming Models
        1. 33.4.1.1 Global Initialization
        2. 33.4.1.2 AES Operating Modes Configuration
        3. 33.4.1.3 AES Mode Configurations
        4. 33.4.1.4 AES Events Servicing
    5. 33.5 Software
      1. 33.5.1 AES Examples
        1. 33.5.1.1 AES ECB Encryption Example
        2. 33.5.1.2 AES ECB De-cryption Example
        3. 33.5.1.3 AES GCM Encryption Example
        4. 33.5.1.4 AES GCM Decryption Example
    6. 33.6 AES Registers
      1. 33.6.1 AES Base Address Table
      2. 33.6.2 AES_REGS Registers
      3. 33.6.3 AES_SS_REGS Registers
      4. 33.6.4 Register to Driverlib Function Mapping
        1. 33.6.4.1 AES Registers to Driverlib Functions
        2. 33.6.4.2 AES_SS Registers to Driverlib Functions
  36. 34Embedded Pattern Generator (EPG)
    1. 34.1 Introduction
      1. 34.1.1 Features
      2. 34.1.2 EPG Block Diagram
      3. 34.1.3 EPG Related Collateral
    2. 34.2 Clock Generator Modules
      1. 34.2.1 DCLK (50% duty cycle clock)
      2. 34.2.2 Clock Stop
    3. 34.3 Signal Generator Module
    4. 34.4 EPG Peripheral Signal Mux Selection
    5. 34.5 Application Software Notes
    6. 34.6 EPG Example Use Cases
      1. 34.6.1 EPG Example: Synchronous Clocks with Offset
        1. 34.6.1.1 Synchronous Clocks with Offset Register Configuration
      2. 34.6.2 EPG Example: Serial Data Bit Stream (LSB first)
        1. 34.6.2.1 Serial Data Bit Stream (LSB first) Register Configuration
      3. 34.6.3 EPG Example: Serial Data Bit Stream (MSB first)
        1. 34.6.3.1 Serial Data Bit Stream (MSB first) Register Configuration
      4. 34.6.4 EPG Example: Clock and Data Pair
        1. 34.6.4.1 Clock and Data Pair Register Configuration
      5. 34.6.5 EPG Example: Clock and Skewed Data Pair
        1. 34.6.5.1 Clock and Skewed Data Pair Register Configuration
      6. 34.6.6 EPG Example: Capturing Serial Data with a Known Baud Rate
        1. 34.6.6.1 Capturing Serial Data with a Known Baud Rate Register Configuration
    7. 34.7 EPG Interrupt
    8. 34.8 Software
      1. 34.8.1 EPG Examples
        1. 34.8.1.1 EPG Generating Synchronous Clocks - SINGLE_CORE
        2. 34.8.1.2 EPG Generating Two Offset Clocks - SINGLE_CORE
        3. 34.8.1.3 EPG Generating Two Offset Clocks With SIGGEN - SINGLE_CORE
        4. 34.8.1.4 EPG Generate Serial Data - SINGLE_CORE
        5. 34.8.1.5 EPG Generate Serial Data Shift Mode - SINGLE_CORE
    9. 34.9 EPG Registers
      1. 34.9.1 EPG Base Address Table
      2. 34.9.2 EPG_REGS Registers
      3. 34.9.3 EPG_MUX_REGS Registers
      4. 34.9.4 EPG Registers to Driverlib Functions
  37. 35Modular Controller Area Network (MCAN)
    1. 35.1 MCAN Introduction
      1. 35.1.1 MCAN Related Collateral
      2. 35.1.2 MCAN Features
    2. 35.2 MCAN Environment
    3. 35.3 CAN Network Basics
    4. 35.4 MCAN Integration
    5. 35.5 MCAN Functional Description
      1. 35.5.1  Module Clocking Requirements
      2. 35.5.2  Interrupt Requests
      3. 35.5.3  Operating Modes
        1. 35.5.3.1 Software Initialization
        2. 35.5.3.2 Normal Operation
        3. 35.5.3.3 CAN FD Operation
      4. 35.5.4  Transmitter Delay Compensation
        1. 35.5.4.1 Description
        2. 35.5.4.2 Transmitter Delay Compensation Measurement
      5. 35.5.5  Restricted Operation Mode
      6. 35.5.6  Bus Monitoring Mode
      7. 35.5.7  Disabled Automatic Retransmission (DAR) Mode
        1. 35.5.7.1 Frame Transmission in DAR Mode
      8. 35.5.8  Clock Stop Mode
        1. 35.5.8.1 Suspend Mode
        2. 35.5.8.2 Wakeup Request
      9. 35.5.9  Test Modes
        1. 35.5.9.1 External Loop Back Mode
        2. 35.5.9.2 Internal Loop Back Mode
      10. 35.5.10 Timestamp Generation
        1. 35.5.10.1 External Timestamp Counter
      11. 35.5.11 Timeout Counter
      12. 35.5.12 Safety
        1. 35.5.12.1 ECC Wrapper
        2. 35.5.12.2 ECC Aggregator
          1. 35.5.12.2.1 ECC Aggregator Overview
          2. 35.5.12.2.2 ECC Aggregator Registers
        3. 35.5.12.3 Reads to ECC Control and Status Registers
        4. 35.5.12.4 ECC Interrupts
      13. 35.5.13 Rx Handling
        1. 35.5.13.1 Acceptance Filtering
          1. 35.5.13.1.1 Range Filter
          2. 35.5.13.1.2 Filter for Specific IDs
          3. 35.5.13.1.3 Classic Bit Mask Filter
          4. 35.5.13.1.4 Standard Message ID Filtering
          5. 35.5.13.1.5 Extended Message ID Filtering
        2. 35.5.13.2 Rx FIFOs
          1. 35.5.13.2.1 Rx FIFO Blocking Mode
          2. 35.5.13.2.2 Rx FIFO Overwrite Mode
        3. 35.5.13.3 Dedicated Rx Buffers
          1. 35.5.13.3.1 Rx Buffer Handling
      14. 35.5.14 Tx Handling
        1. 35.5.14.1 Transmit Pause
        2. 35.5.14.2 Dedicated Tx Buffers
        3. 35.5.14.3 Tx FIFO
        4. 35.5.14.4 Tx Queue
        5. 35.5.14.5 Mixed Dedicated Tx Buffers/Tx FIFO
        6. 35.5.14.6 Mixed Dedicated Tx Buffers/Tx Queue
        7. 35.5.14.7 Transmit Cancellation
        8. 35.5.14.8 Tx Event Handling
      15. 35.5.15 FIFO Acknowledge Handling
      16. 35.5.16 Message RAM
        1. 35.5.16.1 Message RAM Configuration
        2. 35.5.16.2 Rx Buffer and FIFO Element
        3. 35.5.16.3 Tx Buffer Element
        4. 35.5.16.4 Tx Event FIFO Element
        5. 35.5.16.5 Standard Message ID Filter Element
        6. 35.5.16.6 Extended Message ID Filter Element
    6. 35.6 Software
      1. 35.6.1 MCAN Examples
        1. 35.6.1.1 MCAN Loopback with Interrupts Example Using SYSCONFIG Tool - SINGLE_CORE
        2. 35.6.1.2 MCAN Loopback with Polling Example Using SYSCONFIG Tool - SINGLE_CORE
    7. 35.7 MCAN Registers
      1. 35.7.1 MCAN Base Address Table
      2. 35.7.2 MCANSS_REGS Registers
      3. 35.7.3 MCAN_REGS Registers
      4. 35.7.4 MCAN_ERROR_REGS Registers
      5. 35.7.5 MCAN Registers to Driverlib Functions
  38. 36Universal Asynchronous Receiver/Transmitter (UART)
    1. 36.1 Introduction
      1. 36.1.1 Features
      2. 36.1.2 Block Diagram
    2. 36.2 Functional Description
      1. 36.2.1 Transmit and Receive Logic
      2. 36.2.2 Baud-Rate Generation
      3. 36.2.3 Data Transmission
      4. 36.2.4 Serial IR (SIR)
      5. 36.2.5 9-Bit UART Mode
      6. 36.2.6 FIFO Operation
      7. 36.2.7 Interrupts
      8. 36.2.8 Loopback Operation
      9. 36.2.9 DMA Operation
        1. 36.2.9.1 Receiving Data Using UART with DMA
        2. 36.2.9.2 Transmitting Data Using UART with DMA
    3. 36.3 Initialization and Configuration
    4. 36.4 Software
      1. 36.4.1 UART Examples
        1. 36.4.1.1 UART Loopback - SINGLE_CORE
        2. 36.4.1.2 UART Loopback with Interrupt - SINGLE_CORE
        3. 36.4.1.3 UART Loopback with DMA - SINGLE_CORE
    5. 36.5 UART Registers
      1. 36.5.1 UART Base Address Table
      2. 36.5.2 UART_REGS Registers
      3. 36.5.3 UART_REGS_WRITE Registers
      4. 36.5.4 UART Registers to Driverlib Functions
  39. 37Local Interconnect Network (LIN)
    1. 37.1 LIN Overview
      1. 37.1.1 SCI Features
      2. 37.1.2 LIN Features
      3. 37.1.3 LIN Related Collateral
      4. 37.1.4 Block Diagram
    2. 37.2 Serial Communications Interface Module
      1. 37.2.1 SCI Communication Formats
        1. 37.2.1.1 SCI Frame Formats
        2. 37.2.1.2 SCI Asynchronous Timing Mode
        3. 37.2.1.3 SCI Baud Rate
          1. 37.2.1.3.1 Superfractional Divider, SCI Asynchronous Mode
        4. 37.2.1.4 SCI Multiprocessor Communication Modes
          1. 37.2.1.4.1 Idle-Line Multiprocessor Modes
          2. 37.2.1.4.2 Address-Bit Multiprocessor Mode
        5. 37.2.1.5 SCI Multibuffered Mode
      2. 37.2.2 SCI Interrupts
        1. 37.2.2.1 Transmit Interrupt
        2. 37.2.2.2 Receive Interrupt
        3. 37.2.2.3 WakeUp Interrupt
        4. 37.2.2.4 Error Interrupts
      3. 37.2.3 SCI DMA Interface
        1. 37.2.3.1 Receive DMA Requests
        2. 37.2.3.2 Transmit DMA Requests
      4. 37.2.4 SCI Configurations
        1. 37.2.4.1 Receiving Data
          1. 37.2.4.1.1 Receiving Data in Single-Buffer Mode
          2. 37.2.4.1.2 Receiving Data in Multibuffer Mode
        2. 37.2.4.2 Transmitting Data
          1. 37.2.4.2.1 Transmitting Data in Single-Buffer Mode
          2. 37.2.4.2.2 Transmitting Data in Multibuffer Mode
      5. 37.2.5 SCI Low-Power Mode
        1. 37.2.5.1 Sleep Mode for Multiprocessor Communication
    3. 37.3 Local Interconnect Network Module
      1. 37.3.1 LIN Communication Formats
        1. 37.3.1.1  LIN Standards
        2. 37.3.1.2  Message Frame
          1. 37.3.1.2.1 Message Header
          2. 37.3.1.2.2 Response
        3. 37.3.1.3  Synchronizer
        4. 37.3.1.4  Baud Rate
          1. 37.3.1.4.1 Fractional Divider
          2. 37.3.1.4.2 Superfractional Divider
            1. 37.3.1.4.2.1 Superfractional Divider In LIN Mode
        5. 37.3.1.5  Header Generation
          1. 37.3.1.5.1 Event Triggered Frame Handling
          2. 37.3.1.5.2 Header Reception and Adaptive Baud Rate
        6. 37.3.1.6  Extended Frames Handling
        7. 37.3.1.7  Timeout Control
          1. 37.3.1.7.1 No-Response Error (NRE)
          2. 37.3.1.7.2 Bus Idle Detection
          3. 37.3.1.7.3 Timeout After Wakeup Signal and Timeout After Three Wakeup Signals
        8. 37.3.1.8  TXRX Error Detector (TED)
          1. 37.3.1.8.1 Bit Errors
          2. 37.3.1.8.2 Physical Bus Errors
          3. 37.3.1.8.3 ID Parity Errors
          4. 37.3.1.8.4 Checksum Errors
        9. 37.3.1.9  Message Filtering and Validation
        10. 37.3.1.10 Receive Buffers
        11. 37.3.1.11 Transmit Buffers
      2. 37.3.2 LIN Interrupts
      3. 37.3.3 Servicing LIN Interrupts
      4. 37.3.4 LIN DMA Interface
        1. 37.3.4.1 LIN Receive DMA Requests
        2. 37.3.4.2 LIN Transmit DMA Requests
      5. 37.3.5 LIN Configurations
        1. 37.3.5.1 Receiving Data
          1. 37.3.5.1.1 Receiving Data in Single-Buffer Mode
          2. 37.3.5.1.2 Receiving Data in Multibuffer Mode
        2. 37.3.5.2 Transmitting Data
          1. 37.3.5.2.1 Transmitting Data in Single-Buffer Mode
          2. 37.3.5.2.2 Transmitting Data in Multibuffer Mode
    4. 37.4 Low-Power Mode
      1. 37.4.1 Entering Sleep Mode
      2. 37.4.2 Wakeup
      3. 37.4.3 Wakeup Timeouts
    5. 37.5 Emulation Mode
    6. 37.6 Software
      1. 37.6.1 LIN Examples
        1. 37.6.1.1 LIN Internal Loopback with Interrupts - SINGLE_CORE
        2. 37.6.1.2 LIN SCI Mode Internal Loopback with Interrupts - SINGLE_CORE
        3. 37.6.1.3 LIN SCI MODE Internal Loopback with DMA - SINGLE_CORE
        4. 37.6.1.4 LIN Internal Loopback without interrupts (polled mode) - SINGLE_CORE
        5. 37.6.1.5 LIN SCI MODE (Single Buffer) Internal Loopback with DMA - SINGLE_CORE
    7. 37.7 SCI/LIN Registers
      1. 37.7.1 LIN Base Address Table
      2. 37.7.2 LIN_REGS Registers
      3. 37.7.3 LIN Registers to Driverlib Functions
  40. 38Lockstep Compare Module (LCM)
    1. 38.1 Introduction
      1. 38.1.1 Features
      2. 38.1.2 Block Diagram
    2. 38.2 Enabling LCM Comparators
    3. 38.3 Disabling LCM Redundant Module
    4. 38.4 LCM Error Handling
    5. 38.5 LCM Error Flags
    6. 38.6 Debug Mode with LCM
    7. 38.7 Register Parity Error Protection
    8. 38.8 Functional Logic
      1. 38.8.1 Comparator Logic
      2. 38.8.2 Self-Test Logic
        1. 38.8.2.1 Match Test Mode
        2. 38.8.2.2 Mismatch Test Mode
      3. 38.8.3 Error Injection Tests
        1. 38.8.3.1 Comparator Error Force Test
        2. 38.8.3.2 Register Parity Error Test
    9. 38.9 LCM Registers
      1. 38.9.1 LCM Base Address Table
      2. 38.9.2 LCM_REGS Registers
      3. 38.9.3 LCM Registers to Driverlib Functions
  41. 39Revision History

16.3.8 OUTPUT_XBAR_EXT64_REGS Registers

Table 16-181 lists the memory-mapped registers for the OUTPUT_XBAR_EXT64_REGS registers. All register offset addresses not listed in Table 16-181 should be considered as reserved locations and the register contents should not be modified.

Table 16-181 OUTPUT_XBAR_EXT64_REGS Registers
OffsetAcronymRegister NameWrite ProtectionSection
0hOUTPUT1MUX0TO15CFGOutput X-BAR Mux Configuration for Output 1EALLOWGo
2hOUTPUT1MUX16TO31CFGOutput X-BAR Mux Configuration for Output 1EALLOWGo
4hOUTPUT1MUX32TO47CFGOutput X-BAR Mux Configuration for Output 1EALLOWGo
6hOUTPUT1MUX48TO63CFGOutput X-BAR Mux Configuration for Output 1EALLOWGo
8hOUTPUT2MUX0TO15CFGOutput X-BAR Mux Configuration for Output 2EALLOWGo
AhOUTPUT2MUX16TO31CFGOutput X-BAR Mux Configuration for Output 2EALLOWGo
ChOUTPUT2MUX32TO47CFGOutput X-BAR Mux Configuration for Output 2EALLOWGo
EhOUTPUT2MUX48TO63CFGOutput X-BAR Mux Configuration for Output 2EALLOWGo
10hOUTPUT3MUX0TO15CFGOutput X-BAR Mux Configuration for Output 3EALLOWGo
12hOUTPUT3MUX16TO31CFGOutput X-BAR Mux Configuration for Output 3EALLOWGo
14hOUTPUT3MUX32TO47CFGOutput X-BAR Mux Configuration for Output 3EALLOWGo
16hOUTPUT3MUX48TO63CFGOutput X-BAR Mux Configuration for Output 3EALLOWGo
18hOUTPUT4MUX0TO15CFGOutput X-BAR Mux Configuration for Output 4EALLOWGo
1AhOUTPUT4MUX16TO31CFGOutput X-BAR Mux Configuration for Output 4EALLOWGo
1ChOUTPUT4MUX32TO47CFGOutput X-BAR Mux Configuration for Output 4EALLOWGo
1EhOUTPUT4MUX48TO63CFGOutput X-BAR Mux Configuration for Output 4EALLOWGo
20hOUTPUT5MUX0TO15CFGOutput X-BAR Mux Configuration for Output 5EALLOWGo
22hOUTPUT5MUX16TO31CFGOutput X-BAR Mux Configuration for Output 5EALLOWGo
24hOUTPUT5MUX32TO47CFGOutput X-BAR Mux Configuration for Output 5EALLOWGo
26hOUTPUT5MUX48TO63CFGOutput X-BAR Mux Configuration for Output 5EALLOWGo
28hOUTPUT6MUX0TO15CFGOutput X-BAR Mux Configuration for Output 6EALLOWGo
2AhOUTPUT6MUX16TO31CFGOutput X-BAR Mux Configuration for Output 6EALLOWGo
2ChOUTPUT6MUX32TO47CFGOutput X-BAR Mux Configuration for Output 6EALLOWGo
2EhOUTPUT6MUX48TO63CFGOutput X-BAR Mux Configuration for Output 6EALLOWGo
30hOUTPUT7MUX0TO15CFGOutput X-BAR Mux Configuration for Output 7EALLOWGo
32hOUTPUT7MUX16TO31CFGOutput X-BAR Mux Configuration for Output 7EALLOWGo
34hOUTPUT7MUX32TO47CFGOutput X-BAR Mux Configuration for Output 7EALLOWGo
36hOUTPUT7MUX48TO63CFGOutput X-BAR Mux Configuration for Output 7EALLOWGo
38hOUTPUT8MUX0TO15CFGOutput X-BAR Mux Configuration for Output 8EALLOWGo
3AhOUTPUT8MUX16TO31CFGOutput X-BAR Mux Configuration for Output 8EALLOWGo
3ChOUTPUT8MUX32TO47CFGOutput X-BAR Mux Configuration for Output 8EALLOWGo
3EhOUTPUT8MUX48TO63CFGOutput X-BAR Mux Configuration for Output 8EALLOWGo
40hOUTPUT1MUXENABLEOutput X-BAR Mux Enable for Output 1EALLOWGo
42hOUTPUT1MUXENABLE32TO63Output X-BAR Mux Enable for Output 1EALLOWGo
44hOUTPUT2MUXENABLEOutput X-BAR Mux Enable for Output 2EALLOWGo
46hOUTPUT2MUXENABLE32TO63Output X-BAR Mux Enable for Output 2EALLOWGo
48hOUTPUT3MUXENABLEOutput X-BAR Mux Enable for Output 3EALLOWGo
4AhOUTPUT3MUXENABLE32TO63Output X-BAR Mux Enable for Output 3EALLOWGo
4ChOUTPUT4MUXENABLEOutput X-BAR Mux Enable for Output 4EALLOWGo
4EhOUTPUT4MUXENABLE32TO63Output X-BAR Mux Enable for Output 4EALLOWGo
50hOUTPUT5MUXENABLEOutput X-BAR Mux Enable for Output 5EALLOWGo
52hOUTPUT5MUXENABLE32TO63Output X-BAR Mux Enable for Output 5EALLOWGo
54hOUTPUT6MUXENABLEOutput X-BAR Mux Enable for Output 6EALLOWGo
56hOUTPUT6MUXENABLE32TO63Output X-BAR Mux Enable for Output 6EALLOWGo
58hOUTPUT7MUXENABLEOutput X-BAR Mux Enable for Output 7EALLOWGo
5AhOUTPUT7MUXENABLE32TO63Output X-BAR Mux Enable for Output 7EALLOWGo
5ChOUTPUT8MUXENABLEOutput X-BAR Mux Enable for Output 8EALLOWGo
5EhOUTPUT8MUXENABLE32TO63Output X-BAR Mux Enable for Output 8EALLOWGo
60hOUTPUTLATCHOutput X-BAR Output LatchGo
62hOUTPUTLATCHCLROutput X-BAR Output Latch ClearGo
64hOUTPUTLATCHFRCOutput X-BAR Output Latch ClearGo
66hOUTPUTLATCHENABLEOutput X-BAR Output Latch EnableEALLOWGo
68hOUTPUTINVOutput X-BAR Output InversionEALLOWGo
6EhOUTPUTLOCKOutput X-BAR Configuration Lock registerEALLOWGo

Complex bit access types are encoded to fit into small table cells. Table 16-182 shows the codes that are used for access types in this section.

Table 16-182 OUTPUT_XBAR_EXT64_REGS Access Type Codes
Access TypeCodeDescription
Read Type
RRRead
R-0R
-0		Read
Returns 0s
Write Type
WWWrite
W1SW
1S		Write
1 to set
WSonceW
Sonce		Write
Set once
Reset or Default Value
-nValue after reset or the default value
Register Array Variables
i,j,k,l,m,nWhen these variables are used in a register name, an offset, or an address, they refer to the value of a register array where the register is part of a group of repeating registers. The register groups form a hierarchical structure and the array is represented with a formula.
yWhen this variable is used in a register name, an offset, or an address it refers to the value of a register array.

16.3.8.1 OUTPUT1MUX0TO15CFG Register (Offset = 0h) [Reset = 00000000h]

OUTPUT1MUX0TO15CFG is shown in Figure 16-167 and described in Table 16-183.

Return to the Summary Table.

Output X-BAR Mux Configuration for Output 1

Figure 16-167 OUTPUT1MUX0TO15CFG Register
31302928272625242322212019181716
MUX15MUX14MUX13MUX12MUX11MUX10MUX9MUX8
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
1514131211109876543210
MUX7MUX6MUX5MUX4MUX3MUX2MUX1MUX0
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 16-183 OUTPUT1MUX0TO15CFG Register Field Descriptions
BitFieldTypeResetDescription
31-30MUX15R/W0hSelect Bits for OUTPUT1 Mux15:

00 : Select .0 input for Mux15
01 : Select .1 input for Mux15
10 : Select .2 input for Mux15
11 : Select .3 input for Mux15

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29-28MUX14R/W0hSelect Bits for OUTPUT1 Mux14:

00 : Select .0 input for Mux14
01 : Select .1 input for Mux14
10 : Select .2 input for Mux14
11 : Select .3 input for Mux14

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27-26MUX13R/W0hSelect Bits for OUTPUT1 Mux13:

00 : Select .0 input for Mux13
01 : Select .1 input for Mux13
10 : Select .2 input for Mux13
11 : Select .3 input for Mux13

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25-24MUX12R/W0hSelect Bits for OUTPUT1 Mux12:

00 : Select .0 input for Mux12
01 : Select .1 input for Mux12
10 : Select .2 input for Mux12
11 : Select .3 input for Mux12

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23-22MUX11R/W0hSelect Bits for OUTPUT1 Mux11:

00 : Select .0 input for Mux11
01 : Select .1 input for Mux11
10 : Select .2 input for Mux11
11 : Select .3 input for Mux11

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21-20MUX10R/W0hSelect Bits for OUTPUT1 Mux10:

00 : Select .0 input for Mux10
01 : Select .1 input for Mux10
10 : Select .2 input for Mux10
11 : Select .3 input for Mux10

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19-18MUX9R/W0hSelect Bits for OUTPUT1 Mux9:

00 : Select .0 input for Mux9
01 : Select .1 input for Mux9
10 : Select .2 input for Mux9
11 : Select .3 input for Mux9

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17-16MUX8R/W0hSelect Bits for OUTPUT1 Mux8:

00 : Select .0 input for Mux8
01 : Select .1 input for Mux8
10 : Select .2 input for Mux8
11 : Select .3 input for Mux8

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15-14MUX7R/W0hSelect Bits for OUTPUT1 Mux7:

00 : Select .0 input for Mux7
01 : Select .1 input for Mux7
10 : Select .2 input for Mux7
11 : Select .3 input for Mux7

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13-12MUX6R/W0hSelect Bits for OUTPUT1 Mux6:

00 : Select .0 input for Mux6
01 : Select .1 input for Mux6
10 : Select .2 input for Mux6
11 : Select .3 input for Mux6

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11-10MUX5R/W0hSelect Bits for OUTPUT1 Mux5:

00 : Select .0 input for Mux5
01 : Select .1 input for Mux5
10 : Select .2 input for Mux5
11 : Select .3 input for Mux5

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9-8MUX4R/W0hSelect Bits for OUTPUT1 Mux4:

00 : Select .0 input for Mux4
01 : Select .1 input for Mux4
10 : Select .2 input for Mux4
11 : Select .3 input for Mux4

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7-6MUX3R/W0hSelect Bits for OUTPUT1 Mux3:

00 : Select .0 input for Mux3
01 : Select .1 input for Mux3
10 : Select .2 input for Mux3
11 : Select .3 input for Mux3

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5-4MUX2R/W0hSelect Bits for OUTPUT1 Mux2:

00 : Select .0 input for Mux2
01 : Select .1 input for Mux2
10 : Select .2 input for Mux2
11 : Select .3 input for Mux2

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3-2MUX1R/W0hSelect Bits for OUTPUT1 Mux1:

00 : Select .0 input for Mux1
01 : Select .1 input for Mux1
10 : Select .2 input for Mux1
11 : Select .3 input for Mux1

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1-0MUX0R/W0hSelect Bits for OUTPUT1 Mux0:

00 : Select .0 input for Mux0
01 : Select .1 input for Mux0
10 : Select .2 input for Mux0
11 : Select .3 input for Mux0

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16.3.8.2 OUTPUT1MUX16TO31CFG Register (Offset = 2h) [Reset = 00000000h]

OUTPUT1MUX16TO31CFG is shown in Figure 16-168 and described in Table 16-184.

Return to the Summary Table.

Output X-BAR Mux Configuration for Output 1

Figure 16-168 OUTPUT1MUX16TO31CFG Register
31302928272625242322212019181716
MUX31MUX30MUX29MUX28MUX27MUX26MUX25MUX24
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
1514131211109876543210
MUX23MUX22MUX21MUX20MUX19MUX18MUX17MUX16
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 16-184 OUTPUT1MUX16TO31CFG Register Field Descriptions
BitFieldTypeResetDescription
31-30MUX31R/W0hSelect Bits for OUTPUT1 Mux31:

00 : Select .0 input for Mux31
01 : Select .1 input for Mux31
10 : Select .2 input for Mux31
11 : Select .3 input for Mux31

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29-28MUX30R/W0hSelect Bits for OUTPUT1 Mux30:

00 : Select .0 input for Mux30
01 : Select .1 input for Mux30
10 : Select .2 input for Mux30
11 : Select .3 input for Mux30

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27-26MUX29R/W0hSelect Bits for OUTPUT1 Mux29:

00 : Select .0 input for Mux29
01 : Select .1 input for Mux29
10 : Select .2 input for Mux29
11 : Select .3 input for Mux29

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25-24MUX28R/W0hSelect Bits for OUTPUT1 Mux28:

00 : Select .0 input for Mux28
01 : Select .1 input for Mux28
10 : Select .2 input for Mux28
11 : Select .3 input for Mux28

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23-22MUX27R/W0hSelect Bits for OUTPUT1 Mux27:

00 : Select .0 input for Mux27
01 : Select .1 input for Mux27
10 : Select .2 input for Mux27
11 : Select .3 input for Mux27

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21-20MUX26R/W0hSelect Bits for OUTPUT1 Mux26:

00 : Select .0 input for Mux26
01 : Select .1 input for Mux26
10 : Select .2 input for Mux26
11 : Select .3 input for Mux26

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19-18MUX25R/W0hSelect Bits for OUTPUT1 Mux25:

00 : Select .0 input for Mux25
01 : Select .1 input for Mux25
10 : Select .2 input for Mux25
11 : Select .3 input for Mux25

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17-16MUX24R/W0hSelect Bits for OUTPUT1 Mux24:

00 : Select .0 input for Mux24
01 : Select .1 input for Mux24
10 : Select .2 input for Mux24
11 : Select .3 input for Mux24

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15-14MUX23R/W0hSelect Bits for OUTPUT1 Mux23:

00 : Select .0 input for Mux23
01 : Select .1 input for Mux23
10 : Select .2 input for Mux23
11 : Select .3 input for Mux23

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13-12MUX22R/W0hSelect Bits for OUTPUT1 Mux22:

00 : Select .0 input for Mux22
01 : Select .1 input for Mux22
10 : Select .2 input for Mux22
11 : Select .3 input for Mux22

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11-10MUX21R/W0hSelect Bits for OUTPUT1 Mux21:

00 : Select .0 input for Mux21
01 : Select .1 input for Mux21
10 : Select .2 input for Mux21
11 : Select .3 input for Mux21

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9-8MUX20R/W0hSelect Bits for OUTPUT1 Mux20:

00 : Select .0 input for Mux20
01 : Select .1 input for Mux20
10 : Select .2 input for Mux20
11 : Select .3 input for Mux20

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7-6MUX19R/W0hSelect Bits for OUTPUT1 Mux19:

00 : Select .0 input for Mux19
01 : Select .1 input for Mux19
10 : Select .2 input for Mux19
11 : Select .3 input for Mux19

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5-4MUX18R/W0hSelect Bits for OUTPUT1 Mux18:

00 : Select .0 input for Mux18
01 : Select .1 input for Mux18
10 : Select .2 input for Mux18
11 : Select .3 input for Mux18

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3-2MUX17R/W0hSelect Bits for OUTPUT1 Mux17:

00 : Select .0 input for Mux17
01 : Select .1 input for Mux17
10 : Select .2 input for Mux17
11 : Select .3 input for Mux17

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1-0MUX16R/W0hSelect Bits for OUTPUT1 Mux16:

00 : Select .0 input for Mux16
01 : Select .1 input for Mux16
10 : Select .2 input for Mux16
11 : Select .3 input for Mux16

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16.3.8.3 OUTPUT1MUX32TO47CFG Register (Offset = 4h) [Reset = 00000000h]

OUTPUT1MUX32TO47CFG is shown in Figure 16-169 and described in Table 16-185.

Return to the Summary Table.

Output X-BAR Mux Configuration for Output 1

Figure 16-169 OUTPUT1MUX32TO47CFG Register
31302928272625242322212019181716
MUX47MUX46MUX45MUX44MUX43MUX42MUX41MUX40
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
1514131211109876543210
MUX39MUX38MUX37MUX36MUX35MUX34MUX33MUX32
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 16-185 OUTPUT1MUX32TO47CFG Register Field Descriptions
BitFieldTypeResetDescription
31-30MUX47R/W0hSelect Bits for OUTPUT1 MUX47:

00 : Select .0 input for MUX47
01 : Select .1 input for MUX47
10 : Select .2 input for MUX47
11: Select .3 input for MUX47

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29-28MUX46R/W0hSelect Bits for OUTPUT1 MUX46:

00 : Select .0 input for MUX46
01 : Select .1 input for MUX46
10 : Select .2 input for MUX46
11: Select .3 input for MUX46

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27-26MUX45R/W0hSelect Bits for OUTPUT1 MUX45:

00 : Select .0 input for MUX45
01 : Select .1 input for MUX45
10 : Select .2 input for MUX45
11: Select .3 input for MUX45

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25-24MUX44R/W0hSelect Bits for OUTPUT1 MUX44:

00 : Select .0 input for MUX44
01 : Select .1 input for MUX44
10 : Select .2 input for MUX44
11: Select .3 input for MUX44

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23-22MUX43R/W0hSelect Bits for OUTPUT1 MUX43:

00 : Select .0 input for MUX43
01 : Select .1 input for MUX43
10 : Select .2 input for MUX43
11: Select .3 input for MUX43

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21-20MUX42R/W0hSelect Bits for OUTPUT1 MUX42:

00 : Select .0 input for MUX42
01 : Select .1 input for MUX42
10 : Select .2 input for MUX42
11: Select .3 input for MUX42

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19-18MUX41R/W0hSelect Bits for OUTPUT1 MUX41:

00 : Select .0 input for MUX41
01 : Select .1 input for MUX41
10 : Select .2 input for MUX41
11: Select .3 input for MUX41

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17-16MUX40R/W0hSelect Bits for OUTPUT1 MUX40:

00 : Select .0 input for MUX40
01 : Select .1 input for MUX40
10 : Select .2 input for MUX40
11: Select .3 input for MUX40

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15-14MUX39R/W0hSelect Bits for OUTPUT1 MUX39:

00 : Select .0 input for MUX39
01 : Select .1 input for MUX39
10 : Select .2 input for MUX39
11: Select .3 input for MUX39

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13-12MUX38R/W0hSelect Bits for OUTPUT1 MUX38:

00 : Select .0 input for MUX38
01 : Select .1 input for MUX38
10 : Select .2 input for MUX38
11: Select .3 input for MUX38

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11-10MUX37R/W0hSelect Bits for OUTPUT1 MUX37:

00 : Select .0 input for MUX37
01 : Select .1 input for MUX37
10 : Select .2 input for MUX37
11: Select .3 input for MUX37

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9-8MUX36R/W0hSelect Bits for OUTPUT1 MUX36:

00 : Select .0 input for MUX36
01 : Select .1 input for MUX36
10 : Select .2 input for MUX36
11: Select .3 input for MUX36

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7-6MUX35R/W0hSelect Bits for OUTPUT1 MUX35:

00 : Select .0 input for MUX35
01 : Select .1 input for MUX35
10 : Select .2 input for MUX35
11: Select .3 input for MUX35

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5-4MUX34R/W0hSelect Bits for OUTPUT1 MUX34:

00 : Select .0 input for MUX34
01 : Select .1 input for MUX34
10 : Select .2 input for MUX34
11: Select .3 input for MUX34

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3-2MUX33R/W0hSelect Bits for OUTPUT1 MUX33:

00 : Select .0 input for MUX33
01 : Select .1 input for MUX33
10 : Select .2 input for MUX33
11: Select .3 input for MUX33

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1-0MUX32R/W0hSelect Bits for OUTPUT1 MUX32:

00 : Select .0 input for MUX32
01 : Select .1 input for MUX32
10 : Select .2 input for MUX32
11: Select .3 input for MUX32

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16.3.8.4 OUTPUT1MUX48TO63CFG Register (Offset = 6h) [Reset = 00000000h]

OUTPUT1MUX48TO63CFG is shown in Figure 16-170 and described in Table 16-186.

Return to the Summary Table.

Output X-BAR Mux Configuration for Output 1

Figure 16-170 OUTPUT1MUX48TO63CFG Register
31302928272625242322212019181716
MUX63MUX62MUX61MUX60MUX59MUX58MUX57MUX56
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
1514131211109876543210
MUX55MUX54MUX53MUX52MUX51MUX50MUX49MUX48
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 16-186 OUTPUT1MUX48TO63CFG Register Field Descriptions
BitFieldTypeResetDescription
31-30MUX63R/W0hSelect Bits for OUTPUT1 MUX63:

00 : Select .0 input for MUX63
01 : Select .1 input for MUX63
10 : Select .2 input for MUX63
11: Select .3 input for MUX63

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29-28MUX62R/W0hSelect Bits for OUTPUT1 MUX62:

00 : Select .0 input for MUX62
01 : Select .1 input for MUX62
10 : Select .2 input for MUX62
11: Select .3 input for MUX62

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27-26MUX61R/W0hSelect Bits for OUTPUT1 MUX61:

00 : Select .0 input for MUX61
01 : Select .1 input for MUX61
10 : Select .2 input for MUX61
11: Select .3 input for MUX61

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25-24MUX60R/W0hSelect Bits for OUTPUT1 MUX60:

00 : Select .0 input for MUX60
01 : Select .1 input for MUX60
10 : Select .2 input for MUX60
11: Select .3 input for MUX60

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23-22MUX59R/W0hSelect Bits for OUTPUT1 MUX59:

00 : Select .0 input for MUX59
01 : Select .1 input for MUX59
10 : Select .2 input for MUX59
11: Select .3 input for MUX59

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21-20MUX58R/W0hSelect Bits for OUTPUT1 MUX58:

00 : Select .0 input for MUX58
01 : Select .1 input for MUX58
10 : Select .2 input for MUX58
11: Select .3 input for MUX58

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19-18MUX57R/W0hSelect Bits for OUTPUT1 MUX57:

00 : Select .0 input for MUX57
01 : Select .1 input for MUX57
10 : Select .2 input for MUX57
11: Select .3 input for MUX57

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17-16MUX56R/W0hSelect Bits for OUTPUT1 MUX56:

00 : Select .0 input for MUX56
01 : Select .1 input for MUX56
10 : Select .2 input for MUX56
11: Select .3 input for MUX56

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15-14MUX55R/W0hSelect Bits for OUTPUT1 MUX55:

00 : Select .0 input for MUX55
01 : Select .1 input for MUX55
10 : Select .2 input for MUX55
11: Select .3 input for MUX55

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13-12MUX54R/W0hSelect Bits for OUTPUT1 MUX54:

00 : Select .0 input for MUX54
01 : Select .1 input for MUX54
10 : Select .2 input for MUX54
11: Select .3 input for MUX54

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11-10MUX53R/W0hSelect Bits for OUTPUT1 MUX53:

00 : Select .0 input for MUX53
01 : Select .1 input for MUX53
10 : Select .2 input for MUX53
11: Select .3 input for MUX53

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9-8MUX52R/W0hSelect Bits for OUTPUT1 MUX52:

00 : Select .0 input for MUX52
01 : Select .1 input for MUX52
10 : Select .2 input for MUX52
11: Select .3 input for MUX52

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7-6MUX51R/W0hSelect Bits for OUTPUT1 MUX51:

00 : Select .0 input for MUX51
01 : Select .1 input for MUX51
10 : Select .2 input for MUX51
11: Select .3 input for MUX51

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5-4MUX50R/W0hSelect Bits for OUTPUT1 MUX50:

00 : Select .0 input for MUX50
01 : Select .1 input for MUX50
10 : Select .2 input for MUX50
11: Select .3 input for MUX50

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3-2MUX49R/W0hSelect Bits for OUTPUT1 MUX49:

00 : Select .0 input for MUX49
01 : Select .1 input for MUX49
10 : Select .2 input for MUX49
11: Select .3 input for MUX49

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1-0MUX48R/W0hSelect Bits for OUTPUT1 MUX48:

00 : Select .0 input for MUX48
01 : Select .1 input for MUX48
10 : Select .2 input for MUX48
11: Select .3 input for MUX48

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16.3.8.5 OUTPUT2MUX0TO15CFG Register (Offset = 8h) [Reset = 00000000h]

OUTPUT2MUX0TO15CFG is shown in Figure 16-171 and described in Table 16-187.

Return to the Summary Table.

Output X-BAR Mux Configuration for Output 2

Figure 16-171 OUTPUT2MUX0TO15CFG Register
31302928272625242322212019181716
MUX15MUX14MUX13MUX12MUX11MUX10MUX9MUX8
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
1514131211109876543210
MUX7MUX6MUX5MUX4MUX3MUX2MUX1MUX0
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 16-187 OUTPUT2MUX0TO15CFG Register Field Descriptions
BitFieldTypeResetDescription
31-30MUX15R/W0hSelect Bits for OUTPUT2 Mux15:

00 : Select .0 input for Mux15
01 : Select .1 input for Mux15
10 : Select .2 input for Mux15
11 : Select .3 input for Mux15

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29-28MUX14R/W0hSelect Bits for OUTPUT2 Mux14:

00 : Select .0 input for Mux14
01 : Select .1 input for Mux14
10 : Select .2 input for Mux14
11 : Select .3 input for Mux14

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27-26MUX13R/W0hSelect Bits for OUTPUT2 Mux13:

00 : Select .0 input for Mux13
01 : Select .1 input for Mux13
10 : Select .2 input for Mux13
11 : Select .3 input for Mux13

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25-24MUX12R/W0hSelect Bits for OUTPUT2 Mux12:

00 : Select .0 input for Mux12
01 : Select .1 input for Mux12
10 : Select .2 input for Mux12
11 : Select .3 input for Mux12

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23-22MUX11R/W0hSelect Bits for OUTPUT2 Mux11:

00 : Select .0 input for Mux11
01 : Select .1 input for Mux11
10 : Select .2 input for Mux11
11 : Select .3 input for Mux11

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21-20MUX10R/W0hSelect Bits for OUTPUT2 Mux10:

00 : Select .0 input for Mux10
01 : Select .1 input for Mux10
10 : Select .2 input for Mux10
11 : Select .3 input for Mux10

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19-18MUX9R/W0hSelect Bits for OUTPUT2 Mux9:

00 : Select .0 input for Mux9
01 : Select .1 input for Mux9
10 : Select .2 input for Mux9
11 : Select .3 input for Mux9

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17-16MUX8R/W0hSelect Bits for OUTPUT2 Mux8:

00 : Select .0 input for Mux8
01 : Select .1 input for Mux8
10 : Select .2 input for Mux8
11 : Select .3 input for Mux8

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15-14MUX7R/W0hSelect Bits for OUTPUT2 Mux7:

00 : Select .0 input for Mux7
01 : Select .1 input for Mux7
10 : Select .2 input for Mux7
11 : Select .3 input for Mux7

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13-12MUX6R/W0hSelect Bits for OUTPUT2 Mux6:

00 : Select .0 input for Mux6
01 : Select .1 input for Mux6
10 : Select .2 input for Mux6
11 : Select .3 input for Mux6

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11-10MUX5R/W0hSelect Bits for OUTPUT2 Mux5:

00 : Select .0 input for Mux5
01 : Select .1 input for Mux5
10 : Select .2 input for Mux5
11 : Select .3 input for Mux5

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9-8MUX4R/W0hSelect Bits for OUTPUT2 Mux4:

00 : Select .0 input for Mux4
01 : Select .1 input for Mux4
10 : Select .2 input for Mux4
11 : Select .3 input for Mux4

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7-6MUX3R/W0hSelect Bits for OUTPUT2 Mux3:

00 : Select .0 input for Mux3
01 : Select .1 input for Mux3
10 : Select .2 input for Mux3
11 : Select .3 input for Mux3

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5-4MUX2R/W0hSelect Bits for OUTPUT2 Mux2:

00 : Select .0 input for Mux2
01 : Select .1 input for Mux2
10 : Select .2 input for Mux2
11 : Select .3 input for Mux2

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3-2MUX1R/W0hSelect Bits for OUTPUT2 Mux1:

00 : Select .0 input for Mux1
01 : Select .1 input for Mux1
10 : Select .2 input for Mux1
11 : Select .3 input for Mux1

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1-0MUX0R/W0hSelect Bits for OUTPUT2 Mux0:

00 : Select .0 input for Mux0
01 : Select .1 input for Mux0
10 : Select .2 input for Mux0
11 : Select .3 input for Mux0

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16.3.8.6 OUTPUT2MUX16TO31CFG Register (Offset = Ah) [Reset = 00000000h]

OUTPUT2MUX16TO31CFG is shown in Figure 16-172 and described in Table 16-188.

Return to the Summary Table.

Output X-BAR Mux Configuration for Output 2

Figure 16-172 OUTPUT2MUX16TO31CFG Register
31302928272625242322212019181716
MUX31MUX30MUX29MUX28MUX27MUX26MUX25MUX24
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
1514131211109876543210
MUX23MUX22MUX21MUX20MUX19MUX18MUX17MUX16
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 16-188 OUTPUT2MUX16TO31CFG Register Field Descriptions
BitFieldTypeResetDescription
31-30MUX31R/W0hSelect Bits for OUTPUT2 Mux31:

00 : Select .0 input for Mux31
01 : Select .1 input for Mux31
10 : Select .2 input for Mux31
11 : Select .3 input for Mux31

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29-28MUX30R/W0hSelect Bits for OUTPUT2 Mux30:

00 : Select .0 input for Mux30
01 : Select .1 input for Mux30
10 : Select .2 input for Mux30
11 : Select .3 input for Mux30

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27-26MUX29R/W0hSelect Bits for OUTPUT2 Mux29:

00 : Select .0 input for Mux29
01 : Select .1 input for Mux29
10 : Select .2 input for Mux29
11 : Select .3 input for Mux29

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25-24MUX28R/W0hSelect Bits for OUTPUT2 Mux28:

00 : Select .0 input for Mux28
01 : Select .1 input for Mux28
10 : Select .2 input for Mux28
11 : Select .3 input for Mux28

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23-22MUX27R/W0hSelect Bits for OUTPUT2 Mux27:

00 : Select .0 input for Mux27
01 : Select .1 input for Mux27
10 : Select .2 input for Mux27
11 : Select .3 input for Mux27

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21-20MUX26R/W0hSelect Bits for OUTPUT2 Mux26:

00 : Select .0 input for Mux26
01 : Select .1 input for Mux26
10 : Select .2 input for Mux26
11 : Select .3 input for Mux26

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19-18MUX25R/W0hSelect Bits for OUTPUT2 Mux25:

00 : Select .0 input for Mux25
01 : Select .1 input for Mux25
10 : Select .2 input for Mux25
11 : Select .3 input for Mux25

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17-16MUX24R/W0hSelect Bits for OUTPUT2 Mux24:

00 : Select .0 input for Mux24
01 : Select .1 input for Mux24
10 : Select .2 input for Mux24
11 : Select .3 input for Mux24

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15-14MUX23R/W0hSelect Bits for OUTPUT2 Mux23:

00 : Select .0 input for Mux23
01 : Select .1 input for Mux23
10 : Select .2 input for Mux23
11 : Select .3 input for Mux23

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13-12MUX22R/W0hSelect Bits for OUTPUT2 Mux22:

00 : Select .0 input for Mux22
01 : Select .1 input for Mux22
10 : Select .2 input for Mux22
11 : Select .3 input for Mux22

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11-10MUX21R/W0hSelect Bits for OUTPUT2 Mux21:

00 : Select .0 input for Mux21
01 : Select .1 input for Mux21
10 : Select .2 input for Mux21
11 : Select .3 input for Mux21

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9-8MUX20R/W0hSelect Bits for OUTPUT2 Mux20:

00 : Select .0 input for Mux20
01 : Select .1 input for Mux20
10 : Select .2 input for Mux20
11 : Select .3 input for Mux20

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7-6MUX19R/W0hSelect Bits for OUTPUT2 Mux19:

00 : Select .0 input for Mux19
01 : Select .1 input for Mux19
10 : Select .2 input for Mux19
11 : Select .3 input for Mux19

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5-4MUX18R/W0hSelect Bits for OUTPUT2 Mux18:

00 : Select .0 input for Mux18
01 : Select .1 input for Mux18
10 : Select .2 input for Mux18
11 : Select .3 input for Mux18

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3-2MUX17R/W0hSelect Bits for OUTPUT2 Mux17:

00 : Select .0 input for Mux17
01 : Select .1 input for Mux17
10 : Select .2 input for Mux17
11 : Select .3 input for Mux17

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1-0MUX16R/W0hSelect Bits for OUTPUT2 Mux16:

00 : Select .0 input for Mux16
01 : Select .1 input for Mux16
10 : Select .2 input for Mux16
11 : Select .3 input for Mux16

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16.3.8.7 OUTPUT2MUX32TO47CFG Register (Offset = Ch) [Reset = 00000000h]

OUTPUT2MUX32TO47CFG is shown in Figure 16-173 and described in Table 16-189.

Return to the Summary Table.

Output X-BAR Mux Configuration for Output 2

Figure 16-173 OUTPUT2MUX32TO47CFG Register
31302928272625242322212019181716
MUX47MUX46MUX45MUX44MUX43MUX42MUX41MUX40
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
1514131211109876543210
MUX39MUX38MUX37MUX36MUX35MUX34MUX33MUX32
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 16-189 OUTPUT2MUX32TO47CFG Register Field Descriptions
BitFieldTypeResetDescription
31-30MUX47R/W0hSelect Bits for OUTPUT2 MUX47:

00 : Select .0 input for MUX47
01 : Select .1 input for MUX47
10 : Select .2 input for MUX47
11: Select .3 input for MUX47

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29-28MUX46R/W0hSelect Bits for OUTPUT2 MUX46:

00 : Select .0 input for MUX46
01 : Select .1 input for MUX46
10 : Select .2 input for MUX46
11: Select .3 input for MUX46

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27-26MUX45R/W0hSelect Bits for OUTPUT2 MUX45:

00 : Select .0 input for MUX45
01 : Select .1 input for MUX45
10 : Select .2 input for MUX45
11: Select .3 input for MUX45

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25-24MUX44R/W0hSelect Bits for OUTPUT2 MUX44:

00 : Select .0 input for MUX44
01 : Select .1 input for MUX44
10 : Select .2 input for MUX44
11: Select .3 input for MUX44

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23-22MUX43R/W0hSelect Bits for OUTPUT2 MUX43:

00 : Select .0 input for MUX43
01 : Select .1 input for MUX43
10 : Select .2 input for MUX43
11: Select .3 input for MUX43

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21-20MUX42R/W0hSelect Bits for OUTPUT2 MUX42:

00 : Select .0 input for MUX42
01 : Select .1 input for MUX42
10 : Select .2 input for MUX42
11: Select .3 input for MUX42

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19-18MUX41R/W0hSelect Bits for OUTPUT2 MUX41:

00 : Select .0 input for MUX41
01 : Select .1 input for MUX41
10 : Select .2 input for MUX41
11: Select .3 input for MUX41

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17-16MUX40R/W0hSelect Bits for OUTPUT2 MUX40:

00 : Select .0 input for MUX40
01 : Select .1 input for MUX40
10 : Select .2 input for MUX40
11: Select .3 input for MUX40

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15-14MUX39R/W0hSelect Bits for OUTPUT2 MUX39:

00 : Select .0 input for MUX39
01 : Select .1 input for MUX39
10 : Select .2 input for MUX39
11: Select .3 input for MUX39

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13-12MUX38R/W0hSelect Bits for OUTPUT2 MUX38:

00 : Select .0 input for MUX38
01 : Select .1 input for MUX38
10 : Select .2 input for MUX38
11: Select .3 input for MUX38

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11-10MUX37R/W0hSelect Bits for OUTPUT2 MUX37:

00 : Select .0 input for MUX37
01 : Select .1 input for MUX37
10 : Select .2 input for MUX37
11: Select .3 input for MUX37

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9-8MUX36R/W0hSelect Bits for OUTPUT2 MUX36:

00 : Select .0 input for MUX36
01 : Select .1 input for MUX36
10 : Select .2 input for MUX36
11: Select .3 input for MUX36

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7-6MUX35R/W0hSelect Bits for OUTPUT2 MUX35:

00 : Select .0 input for MUX35
01 : Select .1 input for MUX35
10 : Select .2 input for MUX35
11: Select .3 input for MUX35

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5-4MUX34R/W0hSelect Bits for OUTPUT2 MUX34:

00 : Select .0 input for MUX34
01 : Select .1 input for MUX34
10 : Select .2 input for MUX34
11: Select .3 input for MUX34

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3-2MUX33R/W0hSelect Bits for OUTPUT2 MUX33:

00 : Select .0 input for MUX33
01 : Select .1 input for MUX33
10 : Select .2 input for MUX33
11: Select .3 input for MUX33

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1-0MUX32R/W0hSelect Bits for OUTPUT2 MUX32:

00 : Select .0 input for MUX32
01 : Select .1 input for MUX32
10 : Select .2 input for MUX32
11: Select .3 input for MUX32

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16.3.8.8 OUTPUT2MUX48TO63CFG Register (Offset = Eh) [Reset = 00000000h]

OUTPUT2MUX48TO63CFG is shown in Figure 16-174 and described in Table 16-190.

Return to the Summary Table.

Output X-BAR Mux Configuration for Output 2

Figure 16-174 OUTPUT2MUX48TO63CFG Register
31302928272625242322212019181716
MUX63MUX62MUX61MUX60MUX59MUX58MUX57MUX56
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
1514131211109876543210
MUX55MUX54MUX53MUX52MUX51MUX50MUX49MUX48
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 16-190 OUTPUT2MUX48TO63CFG Register Field Descriptions
BitFieldTypeResetDescription
31-30MUX63R/W0hSelect Bits for OUTPUT2 MUX63:

00 : Select .0 input for MUX63
01 : Select .1 input for MUX63
10 : Select .2 input for MUX63
11: Select .3 input for MUX63

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29-28MUX62R/W0hSelect Bits for OUTPUT2 MUX62:

00 : Select .0 input for MUX62
01 : Select .1 input for MUX62
10 : Select .2 input for MUX62
11: Select .3 input for MUX62

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27-26MUX61R/W0hSelect Bits for OUTPUT2 MUX61:

00 : Select .0 input for MUX61
01 : Select .1 input for MUX61
10 : Select .2 input for MUX61
11: Select .3 input for MUX61

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25-24MUX60R/W0hSelect Bits for OUTPUT2 MUX60:

00 : Select .0 input for MUX60
01 : Select .1 input for MUX60
10 : Select .2 input for MUX60
11: Select .3 input for MUX60

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23-22MUX59R/W0hSelect Bits for OUTPUT2 MUX59:

00 : Select .0 input for MUX59
01 : Select .1 input for MUX59
10 : Select .2 input for MUX59
11: Select .3 input for MUX59

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21-20MUX58R/W0hSelect Bits for OUTPUT2 MUX58:

00 : Select .0 input for MUX58
01 : Select .1 input for MUX58
10 : Select .2 input for MUX58
11: Select .3 input for MUX58

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19-18MUX57R/W0hSelect Bits for OUTPUT2 MUX57:

00 : Select .0 input for MUX57
01 : Select .1 input for MUX57
10 : Select .2 input for MUX57
11: Select .3 input for MUX57

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17-16MUX56R/W0hSelect Bits for OUTPUT2 MUX56:

00 : Select .0 input for MUX56
01 : Select .1 input for MUX56
10 : Select .2 input for MUX56
11: Select .3 input for MUX56

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15-14MUX55R/W0hSelect Bits for OUTPUT2 MUX55:

00 : Select .0 input for MUX55
01 : Select .1 input for MUX55
10 : Select .2 input for MUX55
11: Select .3 input for MUX55

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13-12MUX54R/W0hSelect Bits for OUTPUT2 MUX54:

00 : Select .0 input for MUX54
01 : Select .1 input for MUX54
10 : Select .2 input for MUX54
11: Select .3 input for MUX54

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11-10MUX53R/W0hSelect Bits for OUTPUT2 MUX53:

00 : Select .0 input for MUX53
01 : Select .1 input for MUX53
10 : Select .2 input for MUX53
11: Select .3 input for MUX53

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9-8MUX52R/W0hSelect Bits for OUTPUT2 MUX52:

00 : Select .0 input for MUX52
01 : Select .1 input for MUX52
10 : Select .2 input for MUX52
11: Select .3 input for MUX52

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7-6MUX51R/W0hSelect Bits for OUTPUT2 MUX51:

00 : Select .0 input for MUX51
01 : Select .1 input for MUX51
10 : Select .2 input for MUX51
11: Select .3 input for MUX51

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5-4MUX50R/W0hSelect Bits for OUTPUT2 MUX50:

00 : Select .0 input for MUX50
01 : Select .1 input for MUX50
10 : Select .2 input for MUX50
11: Select .3 input for MUX50

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3-2MUX49R/W0hSelect Bits for OUTPUT2 MUX49:

00 : Select .0 input for MUX49
01 : Select .1 input for MUX49
10 : Select .2 input for MUX49
11: Select .3 input for MUX49

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1-0MUX48R/W0hSelect Bits for OUTPUT2 MUX48:

00 : Select .0 input for MUX48
01 : Select .1 input for MUX48
10 : Select .2 input for MUX48
11: Select .3 input for MUX48

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16.3.8.9 OUTPUT3MUX0TO15CFG Register (Offset = 10h) [Reset = 00000000h]

OUTPUT3MUX0TO15CFG is shown in Figure 16-175 and described in Table 16-191.

Return to the Summary Table.

Output X-BAR Mux Configuration for Output 3

Figure 16-175 OUTPUT3MUX0TO15CFG Register
31302928272625242322212019181716
MUX15MUX14MUX13MUX12MUX11MUX10MUX9MUX8
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
1514131211109876543210
MUX7MUX6MUX5MUX4MUX3MUX2MUX1MUX0
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 16-191 OUTPUT3MUX0TO15CFG Register Field Descriptions
BitFieldTypeResetDescription
31-30MUX15R/W0hSelect Bits for OUTPUT3 Mux15:

00 : Select .0 input for Mux15
01 : Select .1 input for Mux15
10 : Select .2 input for Mux15
11 : Select .3 input for Mux15

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29-28MUX14R/W0hSelect Bits for OUTPUT3 Mux14:

00 : Select .0 input for Mux14
01 : Select .1 input for Mux14
10 : Select .2 input for Mux14
11 : Select .3 input for Mux14

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27-26MUX13R/W0hSelect Bits for OUTPUT3 Mux13:

00 : Select .0 input for Mux13
01 : Select .1 input for Mux13
10 : Select .2 input for Mux13
11 : Select .3 input for Mux13

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25-24MUX12R/W0hSelect Bits for OUTPUT3 Mux12:

00 : Select .0 input for Mux12
01 : Select .1 input for Mux12
10 : Select .2 input for Mux12
11 : Select .3 input for Mux12

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23-22MUX11R/W0hSelect Bits for OUTPUT3 Mux11:

00 : Select .0 input for Mux11
01 : Select .1 input for Mux11
10 : Select .2 input for Mux11
11 : Select .3 input for Mux11

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21-20MUX10R/W0hSelect Bits for OUTPUT3 Mux10:

00 : Select .0 input for Mux10
01 : Select .1 input for Mux10
10 : Select .2 input for Mux10
11 : Select .3 input for Mux10

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19-18MUX9R/W0hSelect Bits for OUTPUT3 Mux9:

00 : Select .0 input for Mux9
01 : Select .1 input for Mux9
10 : Select .2 input for Mux9
11 : Select .3 input for Mux9

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17-16MUX8R/W0hSelect Bits for OUTPUT3 Mux8:

00 : Select .0 input for Mux8
01 : Select .1 input for Mux8
10 : Select .2 input for Mux8
11 : Select .3 input for Mux8

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15-14MUX7R/W0hSelect Bits for OUTPUT3 Mux7:

00 : Select .0 input for Mux7
01 : Select .1 input for Mux7
10 : Select .2 input for Mux7
11 : Select .3 input for Mux7

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13-12MUX6R/W0hSelect Bits for OUTPUT3 Mux6:

00 : Select .0 input for Mux6
01 : Select .1 input for Mux6
10 : Select .2 input for Mux6
11 : Select .3 input for Mux6

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11-10MUX5R/W0hSelect Bits for OUTPUT3 Mux5:

00 : Select .0 input for Mux5
01 : Select .1 input for Mux5
10 : Select .2 input for Mux5
11 : Select .3 input for Mux5

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9-8MUX4R/W0hSelect Bits for OUTPUT3 Mux4:

00 : Select .0 input for Mux4
01 : Select .1 input for Mux4
10 : Select .2 input for Mux4
11 : Select .3 input for Mux4

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7-6MUX3R/W0hSelect Bits for OUTPUT3 Mux3:

00 : Select .0 input for Mux3
01 : Select .1 input for Mux3
10 : Select .2 input for Mux3
11 : Select .3 input for Mux3

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5-4MUX2R/W0hSelect Bits for OUTPUT3 Mux2:

00 : Select .0 input for Mux2
01 : Select .1 input for Mux2
10 : Select .2 input for Mux2
11 : Select .3 input for Mux2

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3-2MUX1R/W0hSelect Bits for OUTPUT3 Mux1:

00 : Select .0 input for Mux1
01 : Select .1 input for Mux1
10 : Select .2 input for Mux1
11 : Select .3 input for Mux1

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1-0MUX0R/W0hSelect Bits for OUTPUT3 Mux0:

00 : Select .0 input for Mux0
01 : Select .1 input for Mux0
10 : Select .2 input for Mux0
11 : Select .3 input for Mux0

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16.3.8.10 OUTPUT3MUX16TO31CFG Register (Offset = 12h) [Reset = 00000000h]

OUTPUT3MUX16TO31CFG is shown in Figure 16-176 and described in Table 16-192.

Return to the Summary Table.

Output X-BAR Mux Configuration for Output 3

Figure 16-176 OUTPUT3MUX16TO31CFG Register
31302928272625242322212019181716
MUX31MUX30MUX29MUX28MUX27MUX26MUX25MUX24
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
1514131211109876543210
MUX23MUX22MUX21MUX20MUX19MUX18MUX17MUX16
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 16-192 OUTPUT3MUX16TO31CFG Register Field Descriptions
BitFieldTypeResetDescription
31-30MUX31R/W0hSelect Bits for OUTPUT3 Mux31:

00 : Select .0 input for Mux31
01 : Select .1 input for Mux31
10 : Select .2 input for Mux31
11 : Select .3 input for Mux31

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29-28MUX30R/W0hSelect Bits for OUTPUT3 Mux30:

00 : Select .0 input for Mux30
01 : Select .1 input for Mux30
10 : Select .2 input for Mux30
11 : Select .3 input for Mux30

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27-26MUX29R/W0hSelect Bits for OUTPUT3 Mux29:

00 : Select .0 input for Mux29
01 : Select .1 input for Mux29
10 : Select .2 input for Mux29
11 : Select .3 input for Mux29

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25-24MUX28R/W0hSelect Bits for OUTPUT3 Mux28:

00 : Select .0 input for Mux28
01 : Select .1 input for Mux28
10 : Select .2 input for Mux28
11 : Select .3 input for Mux28

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23-22MUX27R/W0hSelect Bits for OUTPUT3 Mux27:

00 : Select .0 input for Mux27
01 : Select .1 input for Mux27
10 : Select .2 input for Mux27
11 : Select .3 input for Mux27

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21-20MUX26R/W0hSelect Bits for OUTPUT3 Mux26:

00 : Select .0 input for Mux26
01 : Select .1 input for Mux26
10 : Select .2 input for Mux26
11 : Select .3 input for Mux26

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19-18MUX25R/W0hSelect Bits for OUTPUT3 Mux25:

00 : Select .0 input for Mux25
01 : Select .1 input for Mux25
10 : Select .2 input for Mux25
11 : Select .3 input for Mux25

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17-16MUX24R/W0hSelect Bits for OUTPUT3 Mux24:

00 : Select .0 input for Mux24
01 : Select .1 input for Mux24
10 : Select .2 input for Mux24
11 : Select .3 input for Mux24

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15-14MUX23R/W0hSelect Bits for OUTPUT3 Mux23:

00 : Select .0 input for Mux23
01 : Select .1 input for Mux23
10 : Select .2 input for Mux23
11 : Select .3 input for Mux23

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13-12MUX22R/W0hSelect Bits for OUTPUT3 Mux22:

00 : Select .0 input for Mux22
01 : Select .1 input for Mux22
10 : Select .2 input for Mux22
11 : Select .3 input for Mux22

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11-10MUX21R/W0hSelect Bits for OUTPUT3 Mux21:

00 : Select .0 input for Mux21
01 : Select .1 input for Mux21
10 : Select .2 input for Mux21
11 : Select .3 input for Mux21

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9-8MUX20R/W0hSelect Bits for OUTPUT3 Mux20:

00 : Select .0 input for Mux20
01 : Select .1 input for Mux20
10 : Select .2 input for Mux20
11 : Select .3 input for Mux20

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7-6MUX19R/W0hSelect Bits for OUTPUT3 Mux19:

00 : Select .0 input for Mux19
01 : Select .1 input for Mux19
10 : Select .2 input for Mux19
11 : Select .3 input for Mux19

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5-4MUX18R/W0hSelect Bits for OUTPUT3 Mux18:

00 : Select .0 input for Mux18
01 : Select .1 input for Mux18
10 : Select .2 input for Mux18
11 : Select .3 input for Mux18

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3-2MUX17R/W0hSelect Bits for OUTPUT3 Mux17:

00 : Select .0 input for Mux17
01 : Select .1 input for Mux17
10 : Select .2 input for Mux17
11 : Select .3 input for Mux17

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1-0MUX16R/W0hSelect Bits for OUTPUT3 Mux16:

00 : Select .0 input for Mux16
01 : Select .1 input for Mux16
10 : Select .2 input for Mux16
11 : Select .3 input for Mux16

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16.3.8.11 OUTPUT3MUX32TO47CFG Register (Offset = 14h) [Reset = 00000000h]

OUTPUT3MUX32TO47CFG is shown in Figure 16-177 and described in Table 16-193.

Return to the Summary Table.

Output X-BAR Mux Configuration for Output 3

Figure 16-177 OUTPUT3MUX32TO47CFG Register
31302928272625242322212019181716
MUX47MUX46MUX45MUX44MUX43MUX42MUX41MUX40
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
1514131211109876543210
MUX39MUX38MUX37MUX36MUX35MUX34MUX33MUX32
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 16-193 OUTPUT3MUX32TO47CFG Register Field Descriptions
BitFieldTypeResetDescription
31-30MUX47R/W0hSelect Bits for OUTPUT3 MUX47:

00 : Select .0 input for MUX47
01 : Select .1 input for MUX47
10 : Select .2 input for MUX47
11: Select .3 input for MUX47

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29-28MUX46R/W0hSelect Bits for OUTPUT3 MUX46:

00 : Select .0 input for MUX46
01 : Select .1 input for MUX46
10 : Select .2 input for MUX46
11: Select .3 input for MUX46

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27-26MUX45R/W0hSelect Bits for OUTPUT3 MUX45:

00 : Select .0 input for MUX45
01 : Select .1 input for MUX45
10 : Select .2 input for MUX45
11: Select .3 input for MUX45

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25-24MUX44R/W0hSelect Bits for OUTPUT3 MUX44:

00 : Select .0 input for MUX44
01 : Select .1 input for MUX44
10 : Select .2 input for MUX44
11: Select .3 input for MUX44

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23-22MUX43R/W0hSelect Bits for OUTPUT3 MUX43:

00 : Select .0 input for MUX43
01 : Select .1 input for MUX43
10 : Select .2 input for MUX43
11: Select .3 input for MUX43

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21-20MUX42R/W0hSelect Bits for OUTPUT3 MUX42:

00 : Select .0 input for MUX42
01 : Select .1 input for MUX42
10 : Select .2 input for MUX42
11: Select .3 input for MUX42

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19-18MUX41R/W0hSelect Bits for OUTPUT3 MUX41:

00 : Select .0 input for MUX41
01 : Select .1 input for MUX41
10 : Select .2 input for MUX41
11: Select .3 input for MUX41

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17-16MUX40R/W0hSelect Bits for OUTPUT3 MUX40:

00 : Select .0 input for MUX40
01 : Select .1 input for MUX40
10 : Select .2 input for MUX40
11: Select .3 input for MUX40

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15-14MUX39R/W0hSelect Bits for OUTPUT3 MUX39:

00 : Select .0 input for MUX39
01 : Select .1 input for MUX39
10 : Select .2 input for MUX39
11: Select .3 input for MUX39

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13-12MUX38R/W0hSelect Bits for OUTPUT3 MUX38:

00 : Select .0 input for MUX38
01 : Select .1 input for MUX38
10 : Select .2 input for MUX38
11: Select .3 input for MUX38

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11-10MUX37R/W0hSelect Bits for OUTPUT3 MUX37:

00 : Select .0 input for MUX37
01 : Select .1 input for MUX37
10 : Select .2 input for MUX37
11: Select .3 input for MUX37

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9-8MUX36R/W0hSelect Bits for OUTPUT3 MUX36:

00 : Select .0 input for MUX36
01 : Select .1 input for MUX36
10 : Select .2 input for MUX36
11: Select .3 input for MUX36

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7-6MUX35R/W0hSelect Bits for OUTPUT3 MUX35:

00 : Select .0 input for MUX35
01 : Select .1 input for MUX35
10 : Select .2 input for MUX35
11: Select .3 input for MUX35

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5-4MUX34R/W0hSelect Bits for OUTPUT3 MUX34:

00 : Select .0 input for MUX34
01 : Select .1 input for MUX34
10 : Select .2 input for MUX34
11: Select .3 input for MUX34

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3-2MUX33R/W0hSelect Bits for OUTPUT3 MUX33:

00 : Select .0 input for MUX33
01 : Select .1 input for MUX33
10 : Select .2 input for MUX33
11: Select .3 input for MUX33

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1-0MUX32R/W0hSelect Bits for OUTPUT3 MUX32:

00 : Select .0 input for MUX32
01 : Select .1 input for MUX32
10 : Select .2 input for MUX32
11: Select .3 input for MUX32

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16.3.8.12 OUTPUT3MUX48TO63CFG Register (Offset = 16h) [Reset = 00000000h]

OUTPUT3MUX48TO63CFG is shown in Figure 16-178 and described in Table 16-194.

Return to the Summary Table.

Output X-BAR Mux Configuration for Output 3

Figure 16-178 OUTPUT3MUX48TO63CFG Register
31302928272625242322212019181716
MUX63MUX62MUX61MUX60MUX59MUX58MUX57MUX56
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
1514131211109876543210
MUX55MUX54MUX53MUX52MUX51MUX50MUX49MUX48
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 16-194 OUTPUT3MUX48TO63CFG Register Field Descriptions
BitFieldTypeResetDescription
31-30MUX63R/W0hSelect Bits for OUTPUT3 MUX63:

00 : Select .0 input for MUX63
01 : Select .1 input for MUX63
10 : Select .2 input for MUX63
11: Select .3 input for MUX63

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29-28MUX62R/W0hSelect Bits for OUTPUT3 MUX62:

00 : Select .0 input for MUX62
01 : Select .1 input for MUX62
10 : Select .2 input for MUX62
11: Select .3 input for MUX62

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27-26MUX61R/W0hSelect Bits for OUTPUT3 MUX61:

00 : Select .0 input for MUX61
01 : Select .1 input for MUX61
10 : Select .2 input for MUX61
11: Select .3 input for MUX61

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25-24MUX60R/W0hSelect Bits for OUTPUT3 MUX60:

00 : Select .0 input for MUX60
01 : Select .1 input for MUX60
10 : Select .2 input for MUX60
11: Select .3 input for MUX60

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23-22MUX59R/W0hSelect Bits for OUTPUT3 MUX59:

00 : Select .0 input for MUX59
01 : Select .1 input for MUX59
10 : Select .2 input for MUX59
11: Select .3 input for MUX59

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21-20MUX58R/W0hSelect Bits for OUTPUT3 MUX58:

00 : Select .0 input for MUX58
01 : Select .1 input for MUX58
10 : Select .2 input for MUX58
11: Select .3 input for MUX58

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19-18MUX57R/W0hSelect Bits for OUTPUT3 MUX57:

00 : Select .0 input for MUX57
01 : Select .1 input for MUX57
10 : Select .2 input for MUX57
11: Select .3 input for MUX57

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17-16MUX56R/W0hSelect Bits for OUTPUT3 MUX56:

00 : Select .0 input for MUX56
01 : Select .1 input for MUX56
10 : Select .2 input for MUX56
11: Select .3 input for MUX56

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15-14MUX55R/W0hSelect Bits for OUTPUT3 MUX55:

00 : Select .0 input for MUX55
01 : Select .1 input for MUX55
10 : Select .2 input for MUX55
11: Select .3 input for MUX55

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13-12MUX54R/W0hSelect Bits for OUTPUT3 MUX54:

00 : Select .0 input for MUX54
01 : Select .1 input for MUX54
10 : Select .2 input for MUX54
11: Select .3 input for MUX54

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11-10MUX53R/W0hSelect Bits for OUTPUT3 MUX53:

00 : Select .0 input for MUX53
01 : Select .1 input for MUX53
10 : Select .2 input for MUX53
11: Select .3 input for MUX53

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9-8MUX52R/W0hSelect Bits for OUTPUT3 MUX52:

00 : Select .0 input for MUX52
01 : Select .1 input for MUX52
10 : Select .2 input for MUX52
11: Select .3 input for MUX52

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7-6MUX51R/W0hSelect Bits for OUTPUT3 MUX51:

00 : Select .0 input for MUX51
01 : Select .1 input for MUX51
10 : Select .2 input for MUX51
11: Select .3 input for MUX51

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5-4MUX50R/W0hSelect Bits for OUTPUT3 MUX50:

00 : Select .0 input for MUX50
01 : Select .1 input for MUX50
10 : Select .2 input for MUX50
11: Select .3 input for MUX50

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3-2MUX49R/W0hSelect Bits for OUTPUT3 MUX49:

00 : Select .0 input for MUX49
01 : Select .1 input for MUX49
10 : Select .2 input for MUX49
11: Select .3 input for MUX49

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1-0MUX48R/W0hSelect Bits for OUTPUT3 MUX48:

00 : Select .0 input for MUX48
01 : Select .1 input for MUX48
10 : Select .2 input for MUX48
11: Select .3 input for MUX48

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16.3.8.13 OUTPUT4MUX0TO15CFG Register (Offset = 18h) [Reset = 00000000h]

OUTPUT4MUX0TO15CFG is shown in Figure 16-179 and described in Table 16-195.

Return to the Summary Table.

Output X-BAR Mux Configuration for Output 4

Figure 16-179 OUTPUT4MUX0TO15CFG Register
31302928272625242322212019181716
MUX15MUX14MUX13MUX12MUX11MUX10MUX9MUX8
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
1514131211109876543210
MUX7MUX6MUX5MUX4MUX3MUX2MUX1MUX0
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 16-195 OUTPUT4MUX0TO15CFG Register Field Descriptions
BitFieldTypeResetDescription
31-30MUX15R/W0hSelect Bits for OUTPUT4 Mux15:

00 : Select .0 input for Mux15
01 : Select .1 input for Mux15
10 : Select .2 input for Mux15
11 : Select .3 input for Mux15

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29-28MUX14R/W0hSelect Bits for OUTPUT4 Mux14:

00 : Select .0 input for Mux14
01 : Select .1 input for Mux14
10 : Select .2 input for Mux14
11 : Select .3 input for Mux14

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27-26MUX13R/W0hSelect Bits for OUTPUT4 Mux13:

00 : Select .0 input for Mux13
01 : Select .1 input for Mux13
10 : Select .2 input for Mux13
11 : Select .3 input for Mux13

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25-24MUX12R/W0hSelect Bits for OUTPUT4 Mux12:

00 : Select .0 input for Mux12
01 : Select .1 input for Mux12
10 : Select .2 input for Mux12
11 : Select .3 input for Mux12

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23-22MUX11R/W0hSelect Bits for OUTPUT4 Mux11:

00 : Select .0 input for Mux11
01 : Select .1 input for Mux11
10 : Select .2 input for Mux11
11 : Select .3 input for Mux11

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21-20MUX10R/W0hSelect Bits for OUTPUT4 Mux10:

00 : Select .0 input for Mux10
01 : Select .1 input for Mux10
10 : Select .2 input for Mux10
11 : Select .3 input for Mux10

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19-18MUX9R/W0hSelect Bits for OUTPUT4 Mux9:

00 : Select .0 input for Mux9
01 : Select .1 input for Mux9
10 : Select .2 input for Mux9
11 : Select .3 input for Mux9

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17-16MUX8R/W0hSelect Bits for OUTPUT4 Mux8:

00 : Select .0 input for Mux8
01 : Select .1 input for Mux8
10 : Select .2 input for Mux8
11 : Select .3 input for Mux8

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15-14MUX7R/W0hSelect Bits for OUTPUT4 Mux7:

00 : Select .0 input for Mux7
01 : Select .1 input for Mux7
10 : Select .2 input for Mux7
11 : Select .3 input for Mux7

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13-12MUX6R/W0hSelect Bits for OUTPUT4 Mux6:

00 : Select .0 input for Mux6
01 : Select .1 input for Mux6
10 : Select .2 input for Mux6
11 : Select .3 input for Mux6

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11-10MUX5R/W0hSelect Bits for OUTPUT4 Mux5:

00 : Select .0 input for Mux5
01 : Select .1 input for Mux5
10 : Select .2 input for Mux5
11 : Select .3 input for Mux5

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9-8MUX4R/W0hSelect Bits for OUTPUT4 Mux4:

00 : Select .0 input for Mux4
01 : Select .1 input for Mux4
10 : Select .2 input for Mux4
11 : Select .3 input for Mux4

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7-6MUX3R/W0hSelect Bits for OUTPUT4 Mux3:

00 : Select .0 input for Mux3
01 : Select .1 input for Mux3
10 : Select .2 input for Mux3
11 : Select .3 input for Mux3

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5-4MUX2R/W0hSelect Bits for OUTPUT4 Mux2:

00 : Select .0 input for Mux2
01 : Select .1 input for Mux2
10 : Select .2 input for Mux2
11 : Select .3 input for Mux2

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3-2MUX1R/W0hSelect Bits for OUTPUT4 Mux1:

00 : Select .0 input for Mux1
01 : Select .1 input for Mux1
10 : Select .2 input for Mux1
11 : Select .3 input for Mux1

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1-0MUX0R/W0hSelect Bits for OUTPUT4 Mux0:

00 : Select .0 input for Mux0
01 : Select .1 input for Mux0
10 : Select .2 input for Mux0
11 : Select .3 input for Mux0

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16.3.8.14 OUTPUT4MUX16TO31CFG Register (Offset = 1Ah) [Reset = 00000000h]

OUTPUT4MUX16TO31CFG is shown in Figure 16-180 and described in Table 16-196.

Return to the Summary Table.

Output X-BAR Mux Configuration for Output 4

Figure 16-180 OUTPUT4MUX16TO31CFG Register
31302928272625242322212019181716
MUX31MUX30MUX29MUX28MUX27MUX26MUX25MUX24
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
1514131211109876543210
MUX23MUX22MUX21MUX20MUX19MUX18MUX17MUX16
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 16-196 OUTPUT4MUX16TO31CFG Register Field Descriptions
BitFieldTypeResetDescription
31-30MUX31R/W0hSelect Bits for OUTPUT4 Mux31:

00 : Select .0 input for Mux31
01 : Select .1 input for Mux31
10 : Select .2 input for Mux31
11 : Select .3 input for Mux31

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29-28MUX30R/W0hSelect Bits for OUTPUT4 Mux30:

00 : Select .0 input for Mux30
01 : Select .1 input for Mux30
10 : Select .2 input for Mux30
11 : Select .3 input for Mux30

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27-26MUX29R/W0hSelect Bits for OUTPUT4 Mux29:

00 : Select .0 input for Mux29
01 : Select .1 input for Mux29
10 : Select .2 input for Mux29
11 : Select .3 input for Mux29

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25-24MUX28R/W0hSelect Bits for OUTPUT4 Mux28:

00 : Select .0 input for Mux28
01 : Select .1 input for Mux28
10 : Select .2 input for Mux28
11 : Select .3 input for Mux28

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23-22MUX27R/W0hSelect Bits for OUTPUT4 Mux27:

00 : Select .0 input for Mux27
01 : Select .1 input for Mux27
10 : Select .2 input for Mux27
11 : Select .3 input for Mux27

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21-20MUX26R/W0hSelect Bits for OUTPUT4 Mux26:

00 : Select .0 input for Mux26
01 : Select .1 input for Mux26
10 : Select .2 input for Mux26
11 : Select .3 input for Mux26

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19-18MUX25R/W0hSelect Bits for OUTPUT4 Mux25:

00 : Select .0 input for Mux25
01 : Select .1 input for Mux25
10 : Select .2 input for Mux25
11 : Select .3 input for Mux25

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17-16MUX24R/W0hSelect Bits for OUTPUT4 Mux24:

00 : Select .0 input for Mux24
01 : Select .1 input for Mux24
10 : Select .2 input for Mux24
11 : Select .3 input for Mux24

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15-14MUX23R/W0hSelect Bits for OUTPUT4 Mux23:

00 : Select .0 input for Mux23
01 : Select .1 input for Mux23
10 : Select .2 input for Mux23
11 : Select .3 input for Mux23

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13-12MUX22R/W0hSelect Bits for OUTPUT4 Mux22:

00 : Select .0 input for Mux22
01 : Select .1 input for Mux22
10 : Select .2 input for Mux22
11 : Select .3 input for Mux22

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11-10MUX21R/W0hSelect Bits for OUTPUT4 Mux21:

00 : Select .0 input for Mux21
01 : Select .1 input for Mux21
10 : Select .2 input for Mux21
11 : Select .3 input for Mux21

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9-8MUX20R/W0hSelect Bits for OUTPUT4 Mux20:

00 : Select .0 input for Mux20
01 : Select .1 input for Mux20
10 : Select .2 input for Mux20
11 : Select .3 input for Mux20

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7-6MUX19R/W0hSelect Bits for OUTPUT4 Mux19:

00 : Select .0 input for Mux19
01 : Select .1 input for Mux19
10 : Select .2 input for Mux19
11 : Select .3 input for Mux19

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5-4MUX18R/W0hSelect Bits for OUTPUT4 Mux18:

00 : Select .0 input for Mux18
01 : Select .1 input for Mux18
10 : Select .2 input for Mux18
11 : Select .3 input for Mux18

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3-2MUX17R/W0hSelect Bits for OUTPUT4 Mux17:

00 : Select .0 input for Mux17
01 : Select .1 input for Mux17
10 : Select .2 input for Mux17
11 : Select .3 input for Mux17

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1-0MUX16R/W0hSelect Bits for OUTPUT4 Mux16:

00 : Select .0 input for Mux16
01 : Select .1 input for Mux16
10 : Select .2 input for Mux16
11 : Select .3 input for Mux16

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16.3.8.15 OUTPUT4MUX32TO47CFG Register (Offset = 1Ch) [Reset = 00000000h]

OUTPUT4MUX32TO47CFG is shown in Figure 16-181 and described in Table 16-197.

Return to the Summary Table.

Output X-BAR Mux Configuration for Output 4

Figure 16-181 OUTPUT4MUX32TO47CFG Register
31302928272625242322212019181716
MUX47MUX46MUX45MUX44MUX43MUX42MUX41MUX40
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
1514131211109876543210
MUX39MUX38MUX37MUX36MUX35MUX34MUX33MUX32
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 16-197 OUTPUT4MUX32TO47CFG Register Field Descriptions
BitFieldTypeResetDescription
31-30MUX47R/W0hSelect Bits for OUTPUT4 MUX47:

00 : Select .0 input for MUX47
01 : Select .1 input for MUX47
10 : Select .2 input for MUX47
11: Select .3 input for MUX47

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29-28MUX46R/W0hSelect Bits for OUTPUT4 MUX46:

00 : Select .0 input for MUX46
01 : Select .1 input for MUX46
10 : Select .2 input for MUX46
11: Select .3 input for MUX46

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27-26MUX45R/W0hSelect Bits for OUTPUT4 MUX45:

00 : Select .0 input for MUX45
01 : Select .1 input for MUX45
10 : Select .2 input for MUX45
11: Select .3 input for MUX45

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25-24MUX44R/W0hSelect Bits for OUTPUT4 MUX44:

00 : Select .0 input for MUX44
01 : Select .1 input for MUX44
10 : Select .2 input for MUX44
11: Select .3 input for MUX44

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23-22MUX43R/W0hSelect Bits for OUTPUT4 MUX43:

00 : Select .0 input for MUX43
01 : Select .1 input for MUX43
10 : Select .2 input for MUX43
11: Select .3 input for MUX43

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21-20MUX42R/W0hSelect Bits for OUTPUT4 MUX42:

00 : Select .0 input for MUX42
01 : Select .1 input for MUX42
10 : Select .2 input for MUX42
11: Select .3 input for MUX42

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19-18MUX41R/W0hSelect Bits for OUTPUT4 MUX41:

00 : Select .0 input for MUX41
01 : Select .1 input for MUX41
10 : Select .2 input for MUX41
11: Select .3 input for MUX41

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17-16MUX40R/W0hSelect Bits for OUTPUT4 MUX40:

00 : Select .0 input for MUX40
01 : Select .1 input for MUX40
10 : Select .2 input for MUX40
11: Select .3 input for MUX40

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15-14MUX39R/W0hSelect Bits for OUTPUT4 MUX39:

00 : Select .0 input for MUX39
01 : Select .1 input for MUX39
10 : Select .2 input for MUX39
11: Select .3 input for MUX39

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13-12MUX38R/W0hSelect Bits for OUTPUT4 MUX38:

00 : Select .0 input for MUX38
01 : Select .1 input for MUX38
10 : Select .2 input for MUX38
11: Select .3 input for MUX38

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11-10MUX37R/W0hSelect Bits for OUTPUT4 MUX37:

00 : Select .0 input for MUX37
01 : Select .1 input for MUX37
10 : Select .2 input for MUX37
11: Select .3 input for MUX37

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9-8MUX36R/W0hSelect Bits for OUTPUT4 MUX36:

00 : Select .0 input for MUX36
01 : Select .1 input for MUX36
10 : Select .2 input for MUX36
11: Select .3 input for MUX36

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7-6MUX35R/W0hSelect Bits for OUTPUT4 MUX35:

00 : Select .0 input for MUX35
01 : Select .1 input for MUX35
10 : Select .2 input for MUX35
11: Select .3 input for MUX35

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5-4MUX34R/W0hSelect Bits for OUTPUT4 MUX34:

00 : Select .0 input for MUX34
01 : Select .1 input for MUX34
10 : Select .2 input for MUX34
11: Select .3 input for MUX34

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3-2MUX33R/W0hSelect Bits for OUTPUT4 MUX33:

00 : Select .0 input for MUX33
01 : Select .1 input for MUX33
10 : Select .2 input for MUX33
11: Select .3 input for MUX33

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1-0MUX32R/W0hSelect Bits for OUTPUT4 MUX32:

00 : Select .0 input for MUX32
01 : Select .1 input for MUX32
10 : Select .2 input for MUX32
11: Select .3 input for MUX32

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16.3.8.16 OUTPUT4MUX48TO63CFG Register (Offset = 1Eh) [Reset = 00000000h]

OUTPUT4MUX48TO63CFG is shown in Figure 16-182 and described in Table 16-198.

Return to the Summary Table.

Output X-BAR Mux Configuration for Output 4

Figure 16-182 OUTPUT4MUX48TO63CFG Register
31302928272625242322212019181716
MUX63MUX62MUX61MUX60MUX59MUX58MUX57MUX56
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
1514131211109876543210
MUX55MUX54MUX53MUX52MUX51MUX50MUX49MUX48
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 16-198 OUTPUT4MUX48TO63CFG Register Field Descriptions
BitFieldTypeResetDescription
31-30MUX63R/W0hSelect Bits for OUTPUT4 MUX63:

00 : Select .0 input for MUX63
01 : Select .1 input for MUX63
10 : Select .2 input for MUX63
11: Select .3 input for MUX63

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29-28MUX62R/W0hSelect Bits for OUTPUT4 MUX62:

00 : Select .0 input for MUX62
01 : Select .1 input for MUX62
10 : Select .2 input for MUX62
11: Select .3 input for MUX62

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27-26MUX61R/W0hSelect Bits for OUTPUT4 MUX61:

00 : Select .0 input for MUX61
01 : Select .1 input for MUX61
10 : Select .2 input for MUX61
11: Select .3 input for MUX61

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25-24MUX60R/W0hSelect Bits for OUTPUT4 MUX60:

00 : Select .0 input for MUX60
01 : Select .1 input for MUX60
10 : Select .2 input for MUX60
11: Select .3 input for MUX60

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23-22MUX59R/W0hSelect Bits for OUTPUT4 MUX59:

00 : Select .0 input for MUX59
01 : Select .1 input for MUX59
10 : Select .2 input for MUX59
11: Select .3 input for MUX59

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21-20MUX58R/W0hSelect Bits for OUTPUT4 MUX58:

00 : Select .0 input for MUX58
01 : Select .1 input for MUX58
10 : Select .2 input for MUX58
11: Select .3 input for MUX58

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19-18MUX57R/W0hSelect Bits for OUTPUT4 MUX57:

00 : Select .0 input for MUX57
01 : Select .1 input for MUX57
10 : Select .2 input for MUX57
11: Select .3 input for MUX57

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17-16MUX56R/W0hSelect Bits for OUTPUT4 MUX56:

00 : Select .0 input for MUX56
01 : Select .1 input for MUX56
10 : Select .2 input for MUX56
11: Select .3 input for MUX56

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15-14MUX55R/W0hSelect Bits for OUTPUT4 MUX55:

00 : Select .0 input for MUX55
01 : Select .1 input for MUX55
10 : Select .2 input for MUX55
11: Select .3 input for MUX55

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13-12MUX54R/W0hSelect Bits for OUTPUT4 MUX54:

00 : Select .0 input for MUX54
01 : Select .1 input for MUX54
10 : Select .2 input for MUX54
11: Select .3 input for MUX54

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11-10MUX53R/W0hSelect Bits for OUTPUT4 MUX53:

00 : Select .0 input for MUX53
01 : Select .1 input for MUX53
10 : Select .2 input for MUX53
11: Select .3 input for MUX53

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9-8MUX52R/W0hSelect Bits for OUTPUT4 MUX52:

00 : Select .0 input for MUX52
01 : Select .1 input for MUX52
10 : Select .2 input for MUX52
11: Select .3 input for MUX52

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7-6MUX51R/W0hSelect Bits for OUTPUT4 MUX51:

00 : Select .0 input for MUX51
01 : Select .1 input for MUX51
10 : Select .2 input for MUX51
11: Select .3 input for MUX51

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5-4MUX50R/W0hSelect Bits for OUTPUT4 MUX50:

00 : Select .0 input for MUX50
01 : Select .1 input for MUX50
10 : Select .2 input for MUX50
11: Select .3 input for MUX50

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3-2MUX49R/W0hSelect Bits for OUTPUT4 MUX49:

00 : Select .0 input for MUX49
01 : Select .1 input for MUX49
10 : Select .2 input for MUX49
11: Select .3 input for MUX49

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1-0MUX48R/W0hSelect Bits for OUTPUT4 MUX48:

00 : Select .0 input for MUX48
01 : Select .1 input for MUX48
10 : Select .2 input for MUX48
11: Select .3 input for MUX48

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16.3.8.17 OUTPUT5MUX0TO15CFG Register (Offset = 20h) [Reset = 00000000h]

OUTPUT5MUX0TO15CFG is shown in Figure 16-183 and described in Table 16-199.

Return to the Summary Table.

Output X-BAR Mux Configuration for Output 5

Figure 16-183 OUTPUT5MUX0TO15CFG Register
31302928272625242322212019181716
MUX15MUX14MUX13MUX12MUX11MUX10MUX9MUX8
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
1514131211109876543210
MUX7MUX6MUX5MUX4MUX3MUX2MUX1MUX0
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 16-199 OUTPUT5MUX0TO15CFG Register Field Descriptions
BitFieldTypeResetDescription
31-30MUX15R/W0hSelect Bits for OUTPUT5 Mux15:

00 : Select .0 input for Mux15
01 : Select .1 input for Mux15
10 : Select .2 input for Mux15
11 : Select .3 input for Mux15

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29-28MUX14R/W0hSelect Bits for OUTPUT5 Mux14:

00 : Select .0 input for Mux14
01 : Select .1 input for Mux14
10 : Select .2 input for Mux14
11 : Select .3 input for Mux14

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27-26MUX13R/W0hSelect Bits for OUTPUT5 Mux13:

00 : Select .0 input for Mux13
01 : Select .1 input for Mux13
10 : Select .2 input for Mux13
11 : Select .3 input for Mux13

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25-24MUX12R/W0hSelect Bits for OUTPUT5 Mux12:

00 : Select .0 input for Mux12
01 : Select .1 input for Mux12
10 : Select .2 input for Mux12
11 : Select .3 input for Mux12

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23-22MUX11R/W0hSelect Bits for OUTPUT5 Mux11:

00 : Select .0 input for Mux11
01 : Select .1 input for Mux11
10 : Select .2 input for Mux11
11 : Select .3 input for Mux11

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21-20MUX10R/W0hSelect Bits for OUTPUT5 Mux10:

00 : Select .0 input for Mux10
01 : Select .1 input for Mux10
10 : Select .2 input for Mux10
11 : Select .3 input for Mux10

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19-18MUX9R/W0hSelect Bits for OUTPUT5 Mux9:

00 : Select .0 input for Mux9
01 : Select .1 input for Mux9
10 : Select .2 input for Mux9
11 : Select .3 input for Mux9

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17-16MUX8R/W0hSelect Bits for OUTPUT5 Mux8:

00 : Select .0 input for Mux8
01 : Select .1 input for Mux8
10 : Select .2 input for Mux8
11 : Select .3 input for Mux8

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15-14MUX7R/W0hSelect Bits for OUTPUT5 Mux7:

00 : Select .0 input for Mux7
01 : Select .1 input for Mux7
10 : Select .2 input for Mux7
11 : Select .3 input for Mux7

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13-12MUX6R/W0hSelect Bits for OUTPUT5 Mux6:

00 : Select .0 input for Mux6
01 : Select .1 input for Mux6
10 : Select .2 input for Mux6
11 : Select .3 input for Mux6

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11-10MUX5R/W0hSelect Bits for OUTPUT5 Mux5:

00 : Select .0 input for Mux5
01 : Select .1 input for Mux5
10 : Select .2 input for Mux5
11 : Select .3 input for Mux5

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9-8MUX4R/W0hSelect Bits for OUTPUT5 Mux4:

00 : Select .0 input for Mux4
01 : Select .1 input for Mux4
10 : Select .2 input for Mux4
11 : Select .3 input for Mux4

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7-6MUX3R/W0hSelect Bits for OUTPUT5 Mux3:

00 : Select .0 input for Mux3
01 : Select .1 input for Mux3
10 : Select .2 input for Mux3
11 : Select .3 input for Mux3

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5-4MUX2R/W0hSelect Bits for OUTPUT5 Mux2:

00 : Select .0 input for Mux2
01 : Select .1 input for Mux2
10 : Select .2 input for Mux2
11 : Select .3 input for Mux2

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3-2MUX1R/W0hSelect Bits for OUTPUT5 Mux1:

00 : Select .0 input for Mux1
01 : Select .1 input for Mux1
10 : Select .2 input for Mux1
11 : Select .3 input for Mux1

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1-0MUX0R/W0hSelect Bits for OUTPUT5 Mux0:

00 : Select .0 input for Mux0
01 : Select .1 input for Mux0
10 : Select .2 input for Mux0
11 : Select .3 input for Mux0

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16.3.8.18 OUTPUT5MUX16TO31CFG Register (Offset = 22h) [Reset = 00000000h]

OUTPUT5MUX16TO31CFG is shown in Figure 16-184 and described in Table 16-200.

Return to the Summary Table.

Output X-BAR Mux Configuration for Output 5

Figure 16-184 OUTPUT5MUX16TO31CFG Register
31302928272625242322212019181716
MUX31MUX30MUX29MUX28MUX27MUX26MUX25MUX24
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
1514131211109876543210
MUX23MUX22MUX21MUX20MUX19MUX18MUX17MUX16
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 16-200 OUTPUT5MUX16TO31CFG Register Field Descriptions
BitFieldTypeResetDescription
31-30MUX31R/W0hSelect Bits for OUTPUT5 Mux31:

00 : Select .0 input for Mux31
01 : Select .1 input for Mux31
10 : Select .2 input for Mux31
11 : Select .3 input for Mux31

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29-28MUX30R/W0hSelect Bits for OUTPUT5 Mux30:

00 : Select .0 input for Mux30
01 : Select .1 input for Mux30
10 : Select .2 input for Mux30
11 : Select .3 input for Mux30

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27-26MUX29R/W0hSelect Bits for OUTPUT5 Mux29:

00 : Select .0 input for Mux29
01 : Select .1 input for Mux29
10 : Select .2 input for Mux29
11 : Select .3 input for Mux29

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25-24MUX28R/W0hSelect Bits for OUTPUT5 Mux28:

00 : Select .0 input for Mux28
01 : Select .1 input for Mux28
10 : Select .2 input for Mux28
11 : Select .3 input for Mux28

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23-22MUX27R/W0hSelect Bits for OUTPUT5 Mux27:

00 : Select .0 input for Mux27
01 : Select .1 input for Mux27
10 : Select .2 input for Mux27
11 : Select .3 input for Mux27

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21-20MUX26R/W0hSelect Bits for OUTPUT5 Mux26:

00 : Select .0 input for Mux26
01 : Select .1 input for Mux26
10 : Select .2 input for Mux26
11 : Select .3 input for Mux26

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19-18MUX25R/W0hSelect Bits for OUTPUT5 Mux25:

00 : Select .0 input for Mux25
01 : Select .1 input for Mux25
10 : Select .2 input for Mux25
11 : Select .3 input for Mux25

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17-16MUX24R/W0hSelect Bits for OUTPUT5 Mux24:

00 : Select .0 input for Mux24
01 : Select .1 input for Mux24
10 : Select .2 input for Mux24
11 : Select .3 input for Mux24

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15-14MUX23R/W0hSelect Bits for OUTPUT5 Mux23:

00 : Select .0 input for Mux23
01 : Select .1 input for Mux23
10 : Select .2 input for Mux23
11 : Select .3 input for Mux23

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13-12MUX22R/W0hSelect Bits for OUTPUT5 Mux22:

00 : Select .0 input for Mux22
01 : Select .1 input for Mux22
10 : Select .2 input for Mux22
11 : Select .3 input for Mux22

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11-10MUX21R/W0hSelect Bits for OUTPUT5 Mux21:

00 : Select .0 input for Mux21
01 : Select .1 input for Mux21
10 : Select .2 input for Mux21
11 : Select .3 input for Mux21

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9-8MUX20R/W0hSelect Bits for OUTPUT5 Mux20:

00 : Select .0 input for Mux20
01 : Select .1 input for Mux20
10 : Select .2 input for Mux20
11 : Select .3 input for Mux20

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7-6MUX19R/W0hSelect Bits for OUTPUT5 Mux19:

00 : Select .0 input for Mux19
01 : Select .1 input for Mux19
10 : Select .2 input for Mux19
11 : Select .3 input for Mux19

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5-4MUX18R/W0hSelect Bits for OUTPUT5 Mux18:

00 : Select .0 input for Mux18
01 : Select .1 input for Mux18
10 : Select .2 input for Mux18
11 : Select .3 input for Mux18

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3-2MUX17R/W0hSelect Bits for OUTPUT5 Mux17:

00 : Select .0 input for Mux17
01 : Select .1 input for Mux17
10 : Select .2 input for Mux17
11 : Select .3 input for Mux17

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1-0MUX16R/W0hSelect Bits for OUTPUT5 Mux16:

00 : Select .0 input for Mux16
01 : Select .1 input for Mux16
10 : Select .2 input for Mux16
11 : Select .3 input for Mux16

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16.3.8.19 OUTPUT5MUX32TO47CFG Register (Offset = 24h) [Reset = 00000000h]

OUTPUT5MUX32TO47CFG is shown in Figure 16-185 and described in Table 16-201.

Return to the Summary Table.

Output X-BAR Mux Configuration for Output 5

Figure 16-185 OUTPUT5MUX32TO47CFG Register
31302928272625242322212019181716
MUX47MUX46MUX45MUX44MUX43MUX42MUX41MUX40
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
1514131211109876543210
MUX39MUX38MUX37MUX36MUX35MUX34MUX33MUX32
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 16-201 OUTPUT5MUX32TO47CFG Register Field Descriptions
BitFieldTypeResetDescription
31-30MUX47R/W0hSelect Bits for OUTPUT5 MUX47:

00 : Select .0 input for MUX47
01 : Select .1 input for MUX47
10 : Select .2 input for MUX47
11: Select .3 input for MUX47

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29-28MUX46R/W0hSelect Bits for OUTPUT5 MUX46:

00 : Select .0 input for MUX46
01 : Select .1 input for MUX46
10 : Select .2 input for MUX46
11: Select .3 input for MUX46

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27-26MUX45R/W0hSelect Bits for OUTPUT5 MUX45:

00 : Select .0 input for MUX45
01 : Select .1 input for MUX45
10 : Select .2 input for MUX45
11: Select .3 input for MUX45

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25-24MUX44R/W0hSelect Bits for OUTPUT5 MUX44:

00 : Select .0 input for MUX44
01 : Select .1 input for MUX44
10 : Select .2 input for MUX44
11: Select .3 input for MUX44

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23-22MUX43R/W0hSelect Bits for OUTPUT5 MUX43:

00 : Select .0 input for MUX43
01 : Select .1 input for MUX43
10 : Select .2 input for MUX43
11: Select .3 input for MUX43

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21-20MUX42R/W0hSelect Bits for OUTPUT5 MUX42:

00 : Select .0 input for MUX42
01 : Select .1 input for MUX42
10 : Select .2 input for MUX42
11: Select .3 input for MUX42

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19-18MUX41R/W0hSelect Bits for OUTPUT5 MUX41:

00 : Select .0 input for MUX41
01 : Select .1 input for MUX41
10 : Select .2 input for MUX41
11: Select .3 input for MUX41

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17-16MUX40R/W0hSelect Bits for OUTPUT5 MUX40:

00 : Select .0 input for MUX40
01 : Select .1 input for MUX40
10 : Select .2 input for MUX40
11: Select .3 input for MUX40

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15-14MUX39R/W0hSelect Bits for OUTPUT5 MUX39:

00 : Select .0 input for MUX39
01 : Select .1 input for MUX39
10 : Select .2 input for MUX39
11: Select .3 input for MUX39

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13-12MUX38R/W0hSelect Bits for OUTPUT5 MUX38:

00 : Select .0 input for MUX38
01 : Select .1 input for MUX38
10 : Select .2 input for MUX38
11: Select .3 input for MUX38

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11-10MUX37R/W0hSelect Bits for OUTPUT5 MUX37:

00 : Select .0 input for MUX37
01 : Select .1 input for MUX37
10 : Select .2 input for MUX37
11: Select .3 input for MUX37

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9-8MUX36R/W0hSelect Bits for OUTPUT5 MUX36:

00 : Select .0 input for MUX36
01 : Select .1 input for MUX36
10 : Select .2 input for MUX36
11: Select .3 input for MUX36

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7-6MUX35R/W0hSelect Bits for OUTPUT5 MUX35:

00 : Select .0 input for MUX35
01 : Select .1 input for MUX35
10 : Select .2 input for MUX35
11: Select .3 input for MUX35

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5-4MUX34R/W0hSelect Bits for OUTPUT5 MUX34:

00 : Select .0 input for MUX34
01 : Select .1 input for MUX34
10 : Select .2 input for MUX34
11: Select .3 input for MUX34

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3-2MUX33R/W0hSelect Bits for OUTPUT5 MUX33:

00 : Select .0 input for MUX33
01 : Select .1 input for MUX33
10 : Select .2 input for MUX33
11: Select .3 input for MUX33

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1-0MUX32R/W0hSelect Bits for OUTPUT5 MUX32:

00 : Select .0 input for MUX32
01 : Select .1 input for MUX32
10 : Select .2 input for MUX32
11: Select .3 input for MUX32

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16.3.8.20 OUTPUT5MUX48TO63CFG Register (Offset = 26h) [Reset = 00000000h]

OUTPUT5MUX48TO63CFG is shown in Figure 16-186 and described in Table 16-202.

Return to the Summary Table.

Output X-BAR Mux Configuration for Output 5

Figure 16-186 OUTPUT5MUX48TO63CFG Register
31302928272625242322212019181716
MUX63MUX62MUX61MUX60MUX59MUX58MUX57MUX56
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
1514131211109876543210
MUX55MUX54MUX53MUX52MUX51MUX50MUX49MUX48
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 16-202 OUTPUT5MUX48TO63CFG Register Field Descriptions
BitFieldTypeResetDescription
31-30MUX63R/W0hSelect Bits for OUTPUT5 MUX63:

00 : Select .0 input for MUX63
01 : Select .1 input for MUX63
10 : Select .2 input for MUX63
11: Select .3 input for MUX63

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29-28MUX62R/W0hSelect Bits for OUTPUT5 MUX62:

00 : Select .0 input for MUX62
01 : Select .1 input for MUX62
10 : Select .2 input for MUX62
11: Select .3 input for MUX62

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27-26MUX61R/W0hSelect Bits for OUTPUT5 MUX61:

00 : Select .0 input for MUX61
01 : Select .1 input for MUX61
10 : Select .2 input for MUX61
11: Select .3 input for MUX61

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25-24MUX60R/W0hSelect Bits for OUTPUT5 MUX60:

00 : Select .0 input for MUX60
01 : Select .1 input for MUX60
10 : Select .2 input for MUX60
11: Select .3 input for MUX60

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23-22MUX59R/W0hSelect Bits for OUTPUT5 MUX59:

00 : Select .0 input for MUX59
01 : Select .1 input for MUX59
10 : Select .2 input for MUX59
11: Select .3 input for MUX59

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21-20MUX58R/W0hSelect Bits for OUTPUT5 MUX58:

00 : Select .0 input for MUX58
01 : Select .1 input for MUX58
10 : Select .2 input for MUX58
11: Select .3 input for MUX58

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19-18MUX57R/W0hSelect Bits for OUTPUT5 MUX57:

00 : Select .0 input for MUX57
01 : Select .1 input for MUX57
10 : Select .2 input for MUX57
11: Select .3 input for MUX57

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17-16MUX56R/W0hSelect Bits for OUTPUT5 MUX56:

00 : Select .0 input for MUX56
01 : Select .1 input for MUX56
10 : Select .2 input for MUX56
11: Select .3 input for MUX56

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15-14MUX55R/W0hSelect Bits for OUTPUT5 MUX55:

00 : Select .0 input for MUX55
01 : Select .1 input for MUX55
10 : Select .2 input for MUX55
11: Select .3 input for MUX55

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13-12MUX54R/W0hSelect Bits for OUTPUT5 MUX54:

00 : Select .0 input for MUX54
01 : Select .1 input for MUX54
10 : Select .2 input for MUX54
11: Select .3 input for MUX54

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11-10MUX53R/W0hSelect Bits for OUTPUT5 MUX53:

00 : Select .0 input for MUX53
01 : Select .1 input for MUX53
10 : Select .2 input for MUX53
11: Select .3 input for MUX53

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9-8MUX52R/W0hSelect Bits for OUTPUT5 MUX52:

00 : Select .0 input for MUX52
01 : Select .1 input for MUX52
10 : Select .2 input for MUX52
11: Select .3 input for MUX52

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7-6MUX51R/W0hSelect Bits for OUTPUT5 MUX51:

00 : Select .0 input for MUX51
01 : Select .1 input for MUX51
10 : Select .2 input for MUX51
11: Select .3 input for MUX51

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5-4MUX50R/W0hSelect Bits for OUTPUT5 MUX50:

00 : Select .0 input for MUX50
01 : Select .1 input for MUX50
10 : Select .2 input for MUX50
11: Select .3 input for MUX50

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3-2MUX49R/W0hSelect Bits for OUTPUT5 MUX49:

00 : Select .0 input for MUX49
01 : Select .1 input for MUX49
10 : Select .2 input for MUX49
11: Select .3 input for MUX49

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1-0MUX48R/W0hSelect Bits for OUTPUT5 MUX48:

00 : Select .0 input for MUX48
01 : Select .1 input for MUX48
10 : Select .2 input for MUX48
11: Select .3 input for MUX48

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16.3.8.21 OUTPUT6MUX0TO15CFG Register (Offset = 28h) [Reset = 00000000h]

OUTPUT6MUX0TO15CFG is shown in Figure 16-187 and described in Table 16-203.

Return to the Summary Table.

Output X-BAR Mux Configuration for Output 6

Figure 16-187 OUTPUT6MUX0TO15CFG Register
31302928272625242322212019181716
MUX15MUX14MUX13MUX12MUX11MUX10MUX9MUX8
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
1514131211109876543210
MUX7MUX6MUX5MUX4MUX3MUX2MUX1MUX0
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 16-203 OUTPUT6MUX0TO15CFG Register Field Descriptions
BitFieldTypeResetDescription
31-30MUX15R/W0hSelect Bits for OUTPUT6 Mux15:

00 : Select .0 input for Mux15
01 : Select .1 input for Mux15
10 : Select .2 input for Mux15
11 : Select .3 input for Mux15

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29-28MUX14R/W0hSelect Bits for OUTPUT6 Mux14:

00 : Select .0 input for Mux14
01 : Select .1 input for Mux14
10 : Select .2 input for Mux14
11 : Select .3 input for Mux14

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27-26MUX13R/W0hSelect Bits for OUTPUT6 Mux13:

00 : Select .0 input for Mux13
01 : Select .1 input for Mux13
10 : Select .2 input for Mux13
11 : Select .3 input for Mux13

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25-24MUX12R/W0hSelect Bits for OUTPUT6 Mux12:

00 : Select .0 input for Mux12
01 : Select .1 input for Mux12
10 : Select .2 input for Mux12
11 : Select .3 input for Mux12

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23-22MUX11R/W0hSelect Bits for OUTPUT6 Mux11:

00 : Select .0 input for Mux11
01 : Select .1 input for Mux11
10 : Select .2 input for Mux11
11 : Select .3 input for Mux11

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21-20MUX10R/W0hSelect Bits for OUTPUT6 Mux10:

00 : Select .0 input for Mux10
01 : Select .1 input for Mux10
10 : Select .2 input for Mux10
11 : Select .3 input for Mux10

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19-18MUX9R/W0hSelect Bits for OUTPUT6 Mux9:

00 : Select .0 input for Mux9
01 : Select .1 input for Mux9
10 : Select .2 input for Mux9
11 : Select .3 input for Mux9

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17-16MUX8R/W0hSelect Bits for OUTPUT6 Mux8:

00 : Select .0 input for Mux8
01 : Select .1 input for Mux8
10 : Select .2 input for Mux8
11 : Select .3 input for Mux8

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15-14MUX7R/W0hSelect Bits for OUTPUT6 Mux7:

00 : Select .0 input for Mux7
01 : Select .1 input for Mux7
10 : Select .2 input for Mux7
11 : Select .3 input for Mux7

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13-12MUX6R/W0hSelect Bits for OUTPUT6 Mux6:

00 : Select .0 input for Mux6
01 : Select .1 input for Mux6
10 : Select .2 input for Mux6
11 : Select .3 input for Mux6

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11-10MUX5R/W0hSelect Bits for OUTPUT6 Mux5:

00 : Select .0 input for Mux5
01 : Select .1 input for Mux5
10 : Select .2 input for Mux5
11 : Select .3 input for Mux5

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9-8MUX4R/W0hSelect Bits for OUTPUT6 Mux4:

00 : Select .0 input for Mux4
01 : Select .1 input for Mux4
10 : Select .2 input for Mux4
11 : Select .3 input for Mux4

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7-6MUX3R/W0hSelect Bits for OUTPUT6 Mux3:

00 : Select .0 input for Mux3
01 : Select .1 input for Mux3
10 : Select .2 input for Mux3
11 : Select .3 input for Mux3

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5-4MUX2R/W0hSelect Bits for OUTPUT6 Mux2:

00 : Select .0 input for Mux2
01 : Select .1 input for Mux2
10 : Select .2 input for Mux2
11 : Select .3 input for Mux2

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3-2MUX1R/W0hSelect Bits for OUTPUT6 Mux1:

00 : Select .0 input for Mux1
01 : Select .1 input for Mux1
10 : Select .2 input for Mux1
11 : Select .3 input for Mux1

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1-0MUX0R/W0hSelect Bits for OUTPUT6 Mux0:

00 : Select .0 input for Mux0
01 : Select .1 input for Mux0
10 : Select .2 input for Mux0
11 : Select .3 input for Mux0

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16.3.8.22 OUTPUT6MUX16TO31CFG Register (Offset = 2Ah) [Reset = 00000000h]

OUTPUT6MUX16TO31CFG is shown in Figure 16-188 and described in Table 16-204.

Return to the Summary Table.

Output X-BAR Mux Configuration for Output 6

Figure 16-188 OUTPUT6MUX16TO31CFG Register
31302928272625242322212019181716
MUX31MUX30MUX29MUX28MUX27MUX26MUX25MUX24
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
1514131211109876543210
MUX23MUX22MUX21MUX20MUX19MUX18MUX17MUX16
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 16-204 OUTPUT6MUX16TO31CFG Register Field Descriptions
BitFieldTypeResetDescription
31-30MUX31R/W0hSelect Bits for OUTPUT6 Mux31:

00 : Select .0 input for Mux31
01 : Select .1 input for Mux31
10 : Select .2 input for Mux31
11 : Select .3 input for Mux31

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29-28MUX30R/W0hSelect Bits for OUTPUT6 Mux30:

00 : Select .0 input for Mux30
01 : Select .1 input for Mux30
10 : Select .2 input for Mux30
11 : Select .3 input for Mux30

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27-26MUX29R/W0hSelect Bits for OUTPUT6 Mux29:

00 : Select .0 input for Mux29
01 : Select .1 input for Mux29
10 : Select .2 input for Mux29
11 : Select .3 input for Mux29

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25-24MUX28R/W0hSelect Bits for OUTPUT6 Mux28:

00 : Select .0 input for Mux28
01 : Select .1 input for Mux28
10 : Select .2 input for Mux28
11 : Select .3 input for Mux28

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23-22MUX27R/W0hSelect Bits for OUTPUT6 Mux27:

00 : Select .0 input for Mux27
01 : Select .1 input for Mux27
10 : Select .2 input for Mux27
11 : Select .3 input for Mux27

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21-20MUX26R/W0hSelect Bits for OUTPUT6 Mux26:

00 : Select .0 input for Mux26
01 : Select .1 input for Mux26
10 : Select .2 input for Mux26
11 : Select .3 input for Mux26

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19-18MUX25R/W0hSelect Bits for OUTPUT6 Mux25:

00 : Select .0 input for Mux25
01 : Select .1 input for Mux25
10 : Select .2 input for Mux25
11 : Select .3 input for Mux25

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17-16MUX24R/W0hSelect Bits for OUTPUT6 Mux24:

00 : Select .0 input for Mux24
01 : Select .1 input for Mux24
10 : Select .2 input for Mux24
11 : Select .3 input for Mux24

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15-14MUX23R/W0hSelect Bits for OUTPUT6 Mux23:

00 : Select .0 input for Mux23
01 : Select .1 input for Mux23
10 : Select .2 input for Mux23
11 : Select .3 input for Mux23

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13-12MUX22R/W0hSelect Bits for OUTPUT6 Mux22:

00 : Select .0 input for Mux22
01 : Select .1 input for Mux22
10 : Select .2 input for Mux22
11 : Select .3 input for Mux22

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11-10MUX21R/W0hSelect Bits for OUTPUT6 Mux21:

00 : Select .0 input for Mux21
01 : Select .1 input for Mux21
10 : Select .2 input for Mux21
11 : Select .3 input for Mux21

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9-8MUX20R/W0hSelect Bits for OUTPUT6 Mux20:

00 : Select .0 input for Mux20
01 : Select .1 input for Mux20
10 : Select .2 input for Mux20
11 : Select .3 input for Mux20

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7-6MUX19R/W0hSelect Bits for OUTPUT6 Mux19:

00 : Select .0 input for Mux19
01 : Select .1 input for Mux19
10 : Select .2 input for Mux19
11 : Select .3 input for Mux19

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5-4MUX18R/W0hSelect Bits for OUTPUT6 Mux18:

00 : Select .0 input for Mux18
01 : Select .1 input for Mux18
10 : Select .2 input for Mux18
11 : Select .3 input for Mux18

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3-2MUX17R/W0hSelect Bits for OUTPUT6 Mux17:

00 : Select .0 input for Mux17
01 : Select .1 input for Mux17
10 : Select .2 input for Mux17
11 : Select .3 input for Mux17

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1-0MUX16R/W0hSelect Bits for OUTPUT6 Mux16:

00 : Select .0 input for Mux16
01 : Select .1 input for Mux16
10 : Select .2 input for Mux16
11 : Select .3 input for Mux16

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16.3.8.23 OUTPUT6MUX32TO47CFG Register (Offset = 2Ch) [Reset = 00000000h]

OUTPUT6MUX32TO47CFG is shown in Figure 16-189 and described in Table 16-205.

Return to the Summary Table.

Output X-BAR Mux Configuration for Output 6

Figure 16-189 OUTPUT6MUX32TO47CFG Register
31302928272625242322212019181716
MUX47MUX46MUX45MUX44MUX43MUX42MUX41MUX40
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
1514131211109876543210
MUX39MUX38MUX37MUX36MUX35MUX34MUX33MUX32
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 16-205 OUTPUT6MUX32TO47CFG Register Field Descriptions
BitFieldTypeResetDescription
31-30MUX47R/W0hSelect Bits for OUTPUT6 MUX47:

00 : Select .0 input for MUX47
01 : Select .1 input for MUX47
10 : Select .2 input for MUX47
11: Select .3 input for MUX47

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29-28MUX46R/W0hSelect Bits for OUTPUT6 MUX46:

00 : Select .0 input for MUX46
01 : Select .1 input for MUX46
10 : Select .2 input for MUX46
11: Select .3 input for MUX46

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27-26MUX45R/W0hSelect Bits for OUTPUT6 MUX45:

00 : Select .0 input for MUX45
01 : Select .1 input for MUX45
10 : Select .2 input for MUX45
11: Select .3 input for MUX45

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25-24MUX44R/W0hSelect Bits for OUTPUT6 MUX44:

00 : Select .0 input for MUX44
01 : Select .1 input for MUX44
10 : Select .2 input for MUX44
11: Select .3 input for MUX44

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23-22MUX43R/W0hSelect Bits for OUTPUT6 MUX43:

00 : Select .0 input for MUX43
01 : Select .1 input for MUX43
10 : Select .2 input for MUX43
11: Select .3 input for MUX43

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21-20MUX42R/W0hSelect Bits for OUTPUT6 MUX42:

00 : Select .0 input for MUX42
01 : Select .1 input for MUX42
10 : Select .2 input for MUX42
11: Select .3 input for MUX42

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19-18MUX41R/W0hSelect Bits for OUTPUT6 MUX41:

00 : Select .0 input for MUX41
01 : Select .1 input for MUX41
10 : Select .2 input for MUX41
11: Select .3 input for MUX41

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17-16MUX40R/W0hSelect Bits for OUTPUT6 MUX40:

00 : Select .0 input for MUX40
01 : Select .1 input for MUX40
10 : Select .2 input for MUX40
11: Select .3 input for MUX40

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15-14MUX39R/W0hSelect Bits for OUTPUT6 MUX39:

00 : Select .0 input for MUX39
01 : Select .1 input for MUX39
10 : Select .2 input for MUX39
11: Select .3 input for MUX39

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13-12MUX38R/W0hSelect Bits for OUTPUT6 MUX38:

00 : Select .0 input for MUX38
01 : Select .1 input for MUX38
10 : Select .2 input for MUX38
11: Select .3 input for MUX38

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11-10MUX37R/W0hSelect Bits for OUTPUT6 MUX37:

00 : Select .0 input for MUX37
01 : Select .1 input for MUX37
10 : Select .2 input for MUX37
11: Select .3 input for MUX37

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9-8MUX36R/W0hSelect Bits for OUTPUT6 MUX36:

00 : Select .0 input for MUX36
01 : Select .1 input for MUX36
10 : Select .2 input for MUX36
11: Select .3 input for MUX36

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7-6MUX35R/W0hSelect Bits for OUTPUT6 MUX35:

00 : Select .0 input for MUX35
01 : Select .1 input for MUX35
10 : Select .2 input for MUX35
11: Select .3 input for MUX35

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5-4MUX34R/W0hSelect Bits for OUTPUT6 MUX34:

00 : Select .0 input for MUX34
01 : Select .1 input for MUX34
10 : Select .2 input for MUX34
11: Select .3 input for MUX34

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3-2MUX33R/W0hSelect Bits for OUTPUT6 MUX33:

00 : Select .0 input for MUX33
01 : Select .1 input for MUX33
10 : Select .2 input for MUX33
11: Select .3 input for MUX33

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1-0MUX32R/W0hSelect Bits for OUTPUT6 MUX32:

00 : Select .0 input for MUX32
01 : Select .1 input for MUX32
10 : Select .2 input for MUX32
11: Select .3 input for MUX32

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16.3.8.24 OUTPUT6MUX48TO63CFG Register (Offset = 2Eh) [Reset = 00000000h]

OUTPUT6MUX48TO63CFG is shown in Figure 16-190 and described in Table 16-206.

Return to the Summary Table.

Output X-BAR Mux Configuration for Output 6

Figure 16-190 OUTPUT6MUX48TO63CFG Register
31302928272625242322212019181716
MUX63MUX62MUX61MUX60MUX59MUX58MUX57MUX56
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
1514131211109876543210
MUX55MUX54MUX53MUX52MUX51MUX50MUX49MUX48
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 16-206 OUTPUT6MUX48TO63CFG Register Field Descriptions
BitFieldTypeResetDescription
31-30MUX63R/W0hSelect Bits for OUTPUT6 MUX63:

00 : Select .0 input for MUX63
01 : Select .1 input for MUX63
10 : Select .2 input for MUX63
11: Select .3 input for MUX63

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29-28MUX62R/W0hSelect Bits for OUTPUT6 MUX62:

00 : Select .0 input for MUX62
01 : Select .1 input for MUX62
10 : Select .2 input for MUX62
11: Select .3 input for MUX62

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27-26MUX61R/W0hSelect Bits for OUTPUT6 MUX61:

00 : Select .0 input for MUX61
01 : Select .1 input for MUX61
10 : Select .2 input for MUX61
11: Select .3 input for MUX61

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25-24MUX60R/W0hSelect Bits for OUTPUT6 MUX60:

00 : Select .0 input for MUX60
01 : Select .1 input for MUX60
10 : Select .2 input for MUX60
11: Select .3 input for MUX60

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23-22MUX59R/W0hSelect Bits for OUTPUT6 MUX59:

00 : Select .0 input for MUX59
01 : Select .1 input for MUX59
10 : Select .2 input for MUX59
11: Select .3 input for MUX59

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21-20MUX58R/W0hSelect Bits for OUTPUT6 MUX58:

00 : Select .0 input for MUX58
01 : Select .1 input for MUX58
10 : Select .2 input for MUX58
11: Select .3 input for MUX58

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19-18MUX57R/W0hSelect Bits for OUTPUT6 MUX57:

00 : Select .0 input for MUX57
01 : Select .1 input for MUX57
10 : Select .2 input for MUX57
11: Select .3 input for MUX57

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17-16MUX56R/W0hSelect Bits for OUTPUT6 MUX56:

00 : Select .0 input for MUX56
01 : Select .1 input for MUX56
10 : Select .2 input for MUX56
11: Select .3 input for MUX56

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15-14MUX55R/W0hSelect Bits for OUTPUT6 MUX55:

00 : Select .0 input for MUX55
01 : Select .1 input for MUX55
10 : Select .2 input for MUX55
11: Select .3 input for MUX55

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13-12MUX54R/W0hSelect Bits for OUTPUT6 MUX54:

00 : Select .0 input for MUX54
01 : Select .1 input for MUX54
10 : Select .2 input for MUX54
11: Select .3 input for MUX54

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11-10MUX53R/W0hSelect Bits for OUTPUT6 MUX53:

00 : Select .0 input for MUX53
01 : Select .1 input for MUX53
10 : Select .2 input for MUX53
11: Select .3 input for MUX53

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9-8MUX52R/W0hSelect Bits for OUTPUT6 MUX52:

00 : Select .0 input for MUX52
01 : Select .1 input for MUX52
10 : Select .2 input for MUX52
11: Select .3 input for MUX52

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7-6MUX51R/W0hSelect Bits for OUTPUT6 MUX51:

00 : Select .0 input for MUX51
01 : Select .1 input for MUX51
10 : Select .2 input for MUX51
11: Select .3 input for MUX51

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5-4MUX50R/W0hSelect Bits for OUTPUT6 MUX50:

00 : Select .0 input for MUX50
01 : Select .1 input for MUX50
10 : Select .2 input for MUX50
11: Select .3 input for MUX50

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3-2MUX49R/W0hSelect Bits for OUTPUT6 MUX49:

00 : Select .0 input for MUX49
01 : Select .1 input for MUX49
10 : Select .2 input for MUX49
11: Select .3 input for MUX49

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1-0MUX48R/W0hSelect Bits for OUTPUT6 MUX48:

00 : Select .0 input for MUX48
01 : Select .1 input for MUX48
10 : Select .2 input for MUX48
11: Select .3 input for MUX48

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16.3.8.25 OUTPUT7MUX0TO15CFG Register (Offset = 30h) [Reset = 00000000h]

OUTPUT7MUX0TO15CFG is shown in Figure 16-191 and described in Table 16-207.

Return to the Summary Table.

Output X-BAR Mux Configuration for Output 7

Figure 16-191 OUTPUT7MUX0TO15CFG Register
31302928272625242322212019181716
MUX15MUX14MUX13MUX12MUX11MUX10MUX9MUX8
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
1514131211109876543210
MUX7MUX6MUX5MUX4MUX3MUX2MUX1MUX0
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 16-207 OUTPUT7MUX0TO15CFG Register Field Descriptions
BitFieldTypeResetDescription
31-30MUX15R/W0hSelect Bits for OUTPUT7 Mux15:

00 : Select .0 input for Mux15
01 : Select .1 input for Mux15
10 : Select .2 input for Mux15
11 : Select .3 input for Mux15

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29-28MUX14R/W0hSelect Bits for OUTPUT7 Mux14:

00 : Select .0 input for Mux14
01 : Select .1 input for Mux14
10 : Select .2 input for Mux14
11 : Select .3 input for Mux14

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27-26MUX13R/W0hSelect Bits for OUTPUT7 Mux13:

00 : Select .0 input for Mux13
01 : Select .1 input for Mux13
10 : Select .2 input for Mux13
11 : Select .3 input for Mux13

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25-24MUX12R/W0hSelect Bits for OUTPUT7 Mux12:

00 : Select .0 input for Mux12
01 : Select .1 input for Mux12
10 : Select .2 input for Mux12
11 : Select .3 input for Mux12

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23-22MUX11R/W0hSelect Bits for OUTPUT7 Mux11:

00 : Select .0 input for Mux11
01 : Select .1 input for Mux11
10 : Select .2 input for Mux11
11 : Select .3 input for Mux11

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21-20MUX10R/W0hSelect Bits for OUTPUT7 Mux10:

00 : Select .0 input for Mux10
01 : Select .1 input for Mux10
10 : Select .2 input for Mux10
11 : Select .3 input for Mux10

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19-18MUX9R/W0hSelect Bits for OUTPUT7 Mux9:

00 : Select .0 input for Mux9
01 : Select .1 input for Mux9
10 : Select .2 input for Mux9
11 : Select .3 input for Mux9

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17-16MUX8R/W0hSelect Bits for OUTPUT7 Mux8:

00 : Select .0 input for Mux8
01 : Select .1 input for Mux8
10 : Select .2 input for Mux8
11 : Select .3 input for Mux8

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15-14MUX7R/W0hSelect Bits for OUTPUT7 Mux7:

00 : Select .0 input for Mux7
01 : Select .1 input for Mux7
10 : Select .2 input for Mux7
11 : Select .3 input for Mux7

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13-12MUX6R/W0hSelect Bits for OUTPUT7 Mux6:

00 : Select .0 input for Mux6
01 : Select .1 input for Mux6
10 : Select .2 input for Mux6
11 : Select .3 input for Mux6

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11-10MUX5R/W0hSelect Bits for OUTPUT7 Mux5:

00 : Select .0 input for Mux5
01 : Select .1 input for Mux5
10 : Select .2 input for Mux5
11 : Select .3 input for Mux5

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9-8MUX4R/W0hSelect Bits for OUTPUT7 Mux4:

00 : Select .0 input for Mux4
01 : Select .1 input for Mux4
10 : Select .2 input for Mux4
11 : Select .3 input for Mux4

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7-6MUX3R/W0hSelect Bits for OUTPUT7 Mux3:

00 : Select .0 input for Mux3
01 : Select .1 input for Mux3
10 : Select .2 input for Mux3
11 : Select .3 input for Mux3

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5-4MUX2R/W0hSelect Bits for OUTPUT7 Mux2:

00 : Select .0 input for Mux2
01 : Select .1 input for Mux2
10 : Select .2 input for Mux2
11 : Select .3 input for Mux2

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3-2MUX1R/W0hSelect Bits for OUTPUT7 Mux1:

00 : Select .0 input for Mux1
01 : Select .1 input for Mux1
10 : Select .2 input for Mux1
11 : Select .3 input for Mux1

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1-0MUX0R/W0hSelect Bits for OUTPUT7 Mux0:

00 : Select .0 input for Mux0
01 : Select .1 input for Mux0
10 : Select .2 input for Mux0
11 : Select .3 input for Mux0

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16.3.8.26 OUTPUT7MUX16TO31CFG Register (Offset = 32h) [Reset = 00000000h]

OUTPUT7MUX16TO31CFG is shown in Figure 16-192 and described in Table 16-208.

Return to the Summary Table.

Output X-BAR Mux Configuration for Output 7

Figure 16-192 OUTPUT7MUX16TO31CFG Register
31302928272625242322212019181716
MUX31MUX30MUX29MUX28MUX27MUX26MUX25MUX24
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
1514131211109876543210
MUX23MUX22MUX21MUX20MUX19MUX18MUX17MUX16
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 16-208 OUTPUT7MUX16TO31CFG Register Field Descriptions
BitFieldTypeResetDescription
31-30MUX31R/W0hSelect Bits for OUTPUT7 Mux31:

00 : Select .0 input for Mux31
01 : Select .1 input for Mux31
10 : Select .2 input for Mux31
11 : Select .3 input for Mux31

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29-28MUX30R/W0hSelect Bits for OUTPUT7 Mux30:

00 : Select .0 input for Mux30
01 : Select .1 input for Mux30
10 : Select .2 input for Mux30
11 : Select .3 input for Mux30

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27-26MUX29R/W0hSelect Bits for OUTPUT7 Mux29:

00 : Select .0 input for Mux29
01 : Select .1 input for Mux29
10 : Select .2 input for Mux29
11 : Select .3 input for Mux29

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25-24MUX28R/W0hSelect Bits for OUTPUT7 Mux28:

00 : Select .0 input for Mux28
01 : Select .1 input for Mux28
10 : Select .2 input for Mux28
11 : Select .3 input for Mux28

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23-22MUX27R/W0hSelect Bits for OUTPUT7 Mux27:

00 : Select .0 input for Mux27
01 : Select .1 input for Mux27
10 : Select .2 input for Mux27
11 : Select .3 input for Mux27

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21-20MUX26R/W0hSelect Bits for OUTPUT7 Mux26:

00 : Select .0 input for Mux26
01 : Select .1 input for Mux26
10 : Select .2 input for Mux26
11 : Select .3 input for Mux26

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19-18MUX25R/W0hSelect Bits for OUTPUT7 Mux25:

00 : Select .0 input for Mux25
01 : Select .1 input for Mux25
10 : Select .2 input for Mux25
11 : Select .3 input for Mux25

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17-16MUX24R/W0hSelect Bits for OUTPUT7 Mux24:

00 : Select .0 input for Mux24
01 : Select .1 input for Mux24
10 : Select .2 input for Mux24
11 : Select .3 input for Mux24

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15-14MUX23R/W0hSelect Bits for OUTPUT7 Mux23:

00 : Select .0 input for Mux23
01 : Select .1 input for Mux23
10 : Select .2 input for Mux23
11 : Select .3 input for Mux23

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13-12MUX22R/W0hSelect Bits for OUTPUT7 Mux22:

00 : Select .0 input for Mux22
01 : Select .1 input for Mux22
10 : Select .2 input for Mux22
11 : Select .3 input for Mux22

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11-10MUX21R/W0hSelect Bits for OUTPUT7 Mux21:

00 : Select .0 input for Mux21
01 : Select .1 input for Mux21
10 : Select .2 input for Mux21
11 : Select .3 input for Mux21

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9-8MUX20R/W0hSelect Bits for OUTPUT7 Mux20:

00 : Select .0 input for Mux20
01 : Select .1 input for Mux20
10 : Select .2 input for Mux20
11 : Select .3 input for Mux20

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7-6MUX19R/W0hSelect Bits for OUTPUT7 Mux19:

00 : Select .0 input for Mux19
01 : Select .1 input for Mux19
10 : Select .2 input for Mux19
11 : Select .3 input for Mux19

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5-4MUX18R/W0hSelect Bits for OUTPUT7 Mux18:

00 : Select .0 input for Mux18
01 : Select .1 input for Mux18
10 : Select .2 input for Mux18
11 : Select .3 input for Mux18

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3-2MUX17R/W0hSelect Bits for OUTPUT7 Mux17:

00 : Select .0 input for Mux17
01 : Select .1 input for Mux17
10 : Select .2 input for Mux17
11 : Select .3 input for Mux17

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1-0MUX16R/W0hSelect Bits for OUTPUT7 Mux16:

00 : Select .0 input for Mux16
01 : Select .1 input for Mux16
10 : Select .2 input for Mux16
11 : Select .3 input for Mux16

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16.3.8.27 OUTPUT7MUX32TO47CFG Register (Offset = 34h) [Reset = 00000000h]

OUTPUT7MUX32TO47CFG is shown in Figure 16-193 and described in Table 16-209.

Return to the Summary Table.

Output X-BAR Mux Configuration for Output 7

Figure 16-193 OUTPUT7MUX32TO47CFG Register
31302928272625242322212019181716
MUX47MUX46MUX45MUX44MUX43MUX42MUX41MUX40
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
1514131211109876543210
MUX39MUX38MUX37MUX36MUX35MUX34MUX33MUX32
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 16-209 OUTPUT7MUX32TO47CFG Register Field Descriptions
BitFieldTypeResetDescription
31-30MUX47R/W0hSelect Bits for OUTPUT7 MUX47:

00 : Select .0 input for MUX47
01 : Select .1 input for MUX47
10 : Select .2 input for MUX47
11: Select .3 input for MUX47

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29-28MUX46R/W0hSelect Bits for OUTPUT7 MUX46:

00 : Select .0 input for MUX46
01 : Select .1 input for MUX46
10 : Select .2 input for MUX46
11: Select .3 input for MUX46

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27-26MUX45R/W0hSelect Bits for OUTPUT7 MUX45:

00 : Select .0 input for MUX45
01 : Select .1 input for MUX45
10 : Select .2 input for MUX45
11: Select .3 input for MUX45

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25-24MUX44R/W0hSelect Bits for OUTPUT7 MUX44:

00 : Select .0 input for MUX44
01 : Select .1 input for MUX44
10 : Select .2 input for MUX44
11: Select .3 input for MUX44

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23-22MUX43R/W0hSelect Bits for OUTPUT7 MUX43:

00 : Select .0 input for MUX43
01 : Select .1 input for MUX43
10 : Select .2 input for MUX43
11: Select .3 input for MUX43

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21-20MUX42R/W0hSelect Bits for OUTPUT7 MUX42:

00 : Select .0 input for MUX42
01 : Select .1 input for MUX42
10 : Select .2 input for MUX42
11: Select .3 input for MUX42

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19-18MUX41R/W0hSelect Bits for OUTPUT7 MUX41:

00 : Select .0 input for MUX41
01 : Select .1 input for MUX41
10 : Select .2 input for MUX41
11: Select .3 input for MUX41

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17-16MUX40R/W0hSelect Bits for OUTPUT7 MUX40:

00 : Select .0 input for MUX40
01 : Select .1 input for MUX40
10 : Select .2 input for MUX40
11: Select .3 input for MUX40

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15-14MUX39R/W0hSelect Bits for OUTPUT7 MUX39:

00 : Select .0 input for MUX39
01 : Select .1 input for MUX39
10 : Select .2 input for MUX39
11: Select .3 input for MUX39

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13-12MUX38R/W0hSelect Bits for OUTPUT7 MUX38:

00 : Select .0 input for MUX38
01 : Select .1 input for MUX38
10 : Select .2 input for MUX38
11: Select .3 input for MUX38

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11-10MUX37R/W0hSelect Bits for OUTPUT7 MUX37:

00 : Select .0 input for MUX37
01 : Select .1 input for MUX37
10 : Select .2 input for MUX37
11: Select .3 input for MUX37

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9-8MUX36R/W0hSelect Bits for OUTPUT7 MUX36:

00 : Select .0 input for MUX36
01 : Select .1 input for MUX36
10 : Select .2 input for MUX36
11: Select .3 input for MUX36

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7-6MUX35R/W0hSelect Bits for OUTPUT7 MUX35:

00 : Select .0 input for MUX35
01 : Select .1 input for MUX35
10 : Select .2 input for MUX35
11: Select .3 input for MUX35

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5-4MUX34R/W0hSelect Bits for OUTPUT7 MUX34:

00 : Select .0 input for MUX34
01 : Select .1 input for MUX34
10 : Select .2 input for MUX34
11: Select .3 input for MUX34

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3-2MUX33R/W0hSelect Bits for OUTPUT7 MUX33:

00 : Select .0 input for MUX33
01 : Select .1 input for MUX33
10 : Select .2 input for MUX33
11: Select .3 input for MUX33

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1-0MUX32R/W0hSelect Bits for OUTPUT7 MUX32:

00 : Select .0 input for MUX32
01 : Select .1 input for MUX32
10 : Select .2 input for MUX32
11: Select .3 input for MUX32

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16.3.8.28 OUTPUT7MUX48TO63CFG Register (Offset = 36h) [Reset = 00000000h]

OUTPUT7MUX48TO63CFG is shown in Figure 16-194 and described in Table 16-210.

Return to the Summary Table.

Output X-BAR Mux Configuration for Output 7

Figure 16-194 OUTPUT7MUX48TO63CFG Register
31302928272625242322212019181716
MUX63MUX62MUX61MUX60MUX59MUX58MUX57MUX56
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
1514131211109876543210
MUX55MUX54MUX53MUX52MUX51MUX50MUX49MUX48
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 16-210 OUTPUT7MUX48TO63CFG Register Field Descriptions
BitFieldTypeResetDescription
31-30MUX63R/W0hSelect Bits for OUTPUT7 MUX63:

00 : Select .0 input for MUX63
01 : Select .1 input for MUX63
10 : Select .2 input for MUX63
11: Select .3 input for MUX63

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29-28MUX62R/W0hSelect Bits for OUTPUT7 MUX62:

00 : Select .0 input for MUX62
01 : Select .1 input for MUX62
10 : Select .2 input for MUX62
11: Select .3 input for MUX62

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27-26MUX61R/W0hSelect Bits for OUTPUT7 MUX61:

00 : Select .0 input for MUX61
01 : Select .1 input for MUX61
10 : Select .2 input for MUX61
11: Select .3 input for MUX61

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25-24MUX60R/W0hSelect Bits for OUTPUT7 MUX60:

00 : Select .0 input for MUX60
01 : Select .1 input for MUX60
10 : Select .2 input for MUX60
11: Select .3 input for MUX60

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23-22MUX59R/W0hSelect Bits for OUTPUT7 MUX59:

00 : Select .0 input for MUX59
01 : Select .1 input for MUX59
10 : Select .2 input for MUX59
11: Select .3 input for MUX59

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21-20MUX58R/W0hSelect Bits for OUTPUT7 MUX58:

00 : Select .0 input for MUX58
01 : Select .1 input for MUX58
10 : Select .2 input for MUX58
11: Select .3 input for MUX58

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19-18MUX57R/W0hSelect Bits for OUTPUT7 MUX57:

00 : Select .0 input for MUX57
01 : Select .1 input for MUX57
10 : Select .2 input for MUX57
11: Select .3 input for MUX57

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17-16MUX56R/W0hSelect Bits for OUTPUT7 MUX56:

00 : Select .0 input for MUX56
01 : Select .1 input for MUX56
10 : Select .2 input for MUX56
11: Select .3 input for MUX56

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15-14MUX55R/W0hSelect Bits for OUTPUT7 MUX55:

00 : Select .0 input for MUX55
01 : Select .1 input for MUX55
10 : Select .2 input for MUX55
11: Select .3 input for MUX55

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13-12MUX54R/W0hSelect Bits for OUTPUT7 MUX54:

00 : Select .0 input for MUX54
01 : Select .1 input for MUX54
10 : Select .2 input for MUX54
11: Select .3 input for MUX54

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11-10MUX53R/W0hSelect Bits for OUTPUT7 MUX53:

00 : Select .0 input for MUX53
01 : Select .1 input for MUX53
10 : Select .2 input for MUX53
11: Select .3 input for MUX53

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9-8MUX52R/W0hSelect Bits for OUTPUT7 MUX52:

00 : Select .0 input for MUX52
01 : Select .1 input for MUX52
10 : Select .2 input for MUX52
11: Select .3 input for MUX52

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7-6MUX51R/W0hSelect Bits for OUTPUT7 MUX51:

00 : Select .0 input for MUX51
01 : Select .1 input for MUX51
10 : Select .2 input for MUX51
11: Select .3 input for MUX51

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5-4MUX50R/W0hSelect Bits for OUTPUT7 MUX50:

00 : Select .0 input for MUX50
01 : Select .1 input for MUX50
10 : Select .2 input for MUX50
11: Select .3 input for MUX50

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3-2MUX49R/W0hSelect Bits for OUTPUT7 MUX49:

00 : Select .0 input for MUX49
01 : Select .1 input for MUX49
10 : Select .2 input for MUX49
11: Select .3 input for MUX49

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1-0MUX48R/W0hSelect Bits for OUTPUT7 MUX48:

00 : Select .0 input for MUX48
01 : Select .1 input for MUX48
10 : Select .2 input for MUX48
11: Select .3 input for MUX48

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16.3.8.29 OUTPUT8MUX0TO15CFG Register (Offset = 38h) [Reset = 00000000h]

OUTPUT8MUX0TO15CFG is shown in Figure 16-195 and described in Table 16-211.

Return to the Summary Table.

Output X-BAR Mux Configuration for Output 8

Figure 16-195 OUTPUT8MUX0TO15CFG Register
31302928272625242322212019181716
MUX15MUX14MUX13MUX12MUX11MUX10MUX9MUX8
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
1514131211109876543210
MUX7MUX6MUX5MUX4MUX3MUX2MUX1MUX0
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 16-211 OUTPUT8MUX0TO15CFG Register Field Descriptions
BitFieldTypeResetDescription
31-30MUX15R/W0hSelect Bits for OUTPUT8 Mux15:

00 : Select .0 input for Mux15
01 : Select .1 input for Mux15
10 : Select .2 input for Mux15
11 : Select .3 input for Mux15

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29-28MUX14R/W0hSelect Bits for OUTPUT8 Mux14:

00 : Select .0 input for Mux14
01 : Select .1 input for Mux14
10 : Select .2 input for Mux14
11 : Select .3 input for Mux14

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27-26MUX13R/W0hSelect Bits for OUTPUT8 Mux13:

00 : Select .0 input for Mux13
01 : Select .1 input for Mux13
10 : Select .2 input for Mux13
11 : Select .3 input for Mux13

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25-24MUX12R/W0hSelect Bits for OUTPUT8 Mux12:

00 : Select .0 input for Mux12
01 : Select .1 input for Mux12
10 : Select .2 input for Mux12
11 : Select .3 input for Mux12

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23-22MUX11R/W0hSelect Bits for OUTPUT8 Mux11:

00 : Select .0 input for Mux11
01 : Select .1 input for Mux11
10 : Select .2 input for Mux11
11 : Select .3 input for Mux11

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21-20MUX10R/W0hSelect Bits for OUTPUT8 Mux10:

00 : Select .0 input for Mux10
01 : Select .1 input for Mux10
10 : Select .2 input for Mux10
11 : Select .3 input for Mux10

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19-18MUX9R/W0hSelect Bits for OUTPUT8 Mux9:

00 : Select .0 input for Mux9
01 : Select .1 input for Mux9
10 : Select .2 input for Mux9
11 : Select .3 input for Mux9

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17-16MUX8R/W0hSelect Bits for OUTPUT8 Mux8:

00 : Select .0 input for Mux8
01 : Select .1 input for Mux8
10 : Select .2 input for Mux8
11 : Select .3 input for Mux8

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15-14MUX7R/W0hSelect Bits for OUTPUT8 Mux7:

00 : Select .0 input for Mux7
01 : Select .1 input for Mux7
10 : Select .2 input for Mux7
11 : Select .3 input for Mux7

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13-12MUX6R/W0hSelect Bits for OUTPUT8 Mux6:

00 : Select .0 input for Mux6
01 : Select .1 input for Mux6
10 : Select .2 input for Mux6
11 : Select .3 input for Mux6

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11-10MUX5R/W0hSelect Bits for OUTPUT8 Mux5:

00 : Select .0 input for Mux5
01 : Select .1 input for Mux5
10 : Select .2 input for Mux5
11 : Select .3 input for Mux5

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9-8MUX4R/W0hSelect Bits for OUTPUT8 Mux4:

00 : Select .0 input for Mux4
01 : Select .1 input for Mux4
10 : Select .2 input for Mux4
11 : Select .3 input for Mux4

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7-6MUX3R/W0hSelect Bits for OUTPUT8 Mux3:

00 : Select .0 input for Mux3
01 : Select .1 input for Mux3
10 : Select .2 input for Mux3
11 : Select .3 input for Mux3

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5-4MUX2R/W0hSelect Bits for OUTPUT8 Mux2:

00 : Select .0 input for Mux2
01 : Select .1 input for Mux2
10 : Select .2 input for Mux2
11 : Select .3 input for Mux2

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3-2MUX1R/W0hSelect Bits for OUTPUT8 Mux1:

00 : Select .0 input for Mux1
01 : Select .1 input for Mux1
10 : Select .2 input for Mux1
11 : Select .3 input for Mux1

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1-0MUX0R/W0hSelect Bits for OUTPUT8 Mux0:

00 : Select .0 input for Mux0
01 : Select .1 input for Mux0
10 : Select .2 input for Mux0
11 : Select .3 input for Mux0

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16.3.8.30 OUTPUT8MUX16TO31CFG Register (Offset = 3Ah) [Reset = 00000000h]

OUTPUT8MUX16TO31CFG is shown in Figure 16-196 and described in Table 16-212.

Return to the Summary Table.

Output X-BAR Mux Configuration for Output 8

Figure 16-196 OUTPUT8MUX16TO31CFG Register
31302928272625242322212019181716
MUX31MUX30MUX29MUX28MUX27MUX26MUX25MUX24
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
1514131211109876543210
MUX23MUX22MUX21MUX20MUX19MUX18MUX17MUX16
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 16-212 OUTPUT8MUX16TO31CFG Register Field Descriptions
BitFieldTypeResetDescription
31-30MUX31R/W0hSelect Bits for OUTPUT8 Mux31:

00 : Select .0 input for Mux31
01 : Select .1 input for Mux31
10 : Select .2 input for Mux31
11 : Select .3 input for Mux31

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29-28MUX30R/W0hSelect Bits for OUTPUT8 Mux30:

00 : Select .0 input for Mux30
01 : Select .1 input for Mux30
10 : Select .2 input for Mux30
11 : Select .3 input for Mux30

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27-26MUX29R/W0hSelect Bits for OUTPUT8 Mux29:

00 : Select .0 input for Mux29
01 : Select .1 input for Mux29
10 : Select .2 input for Mux29
11 : Select .3 input for Mux29

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25-24MUX28R/W0hSelect Bits for OUTPUT8 Mux28:

00 : Select .0 input for Mux28
01 : Select .1 input for Mux28
10 : Select .2 input for Mux28
11 : Select .3 input for Mux28

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23-22MUX27R/W0hSelect Bits for OUTPUT8 Mux27:

00 : Select .0 input for Mux27
01 : Select .1 input for Mux27
10 : Select .2 input for Mux27
11 : Select .3 input for Mux27

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21-20MUX26R/W0hSelect Bits for OUTPUT8 Mux26:

00 : Select .0 input for Mux26
01 : Select .1 input for Mux26
10 : Select .2 input for Mux26
11 : Select .3 input for Mux26

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19-18MUX25R/W0hSelect Bits for OUTPUT8 Mux25:

00 : Select .0 input for Mux25
01 : Select .1 input for Mux25
10 : Select .2 input for Mux25
11 : Select .3 input for Mux25

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17-16MUX24R/W0hSelect Bits for OUTPUT8 Mux24:

00 : Select .0 input for Mux24
01 : Select .1 input for Mux24
10 : Select .2 input for Mux24
11 : Select .3 input for Mux24

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15-14MUX23R/W0hSelect Bits for OUTPUT8 Mux23:

00 : Select .0 input for Mux23
01 : Select .1 input for Mux23
10 : Select .2 input for Mux23
11 : Select .3 input for Mux23

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13-12MUX22R/W0hSelect Bits for OUTPUT8 Mux22:

00 : Select .0 input for Mux22
01 : Select .1 input for Mux22
10 : Select .2 input for Mux22
11 : Select .3 input for Mux22

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11-10MUX21R/W0hSelect Bits for OUTPUT8 Mux21:

00 : Select .0 input for Mux21
01 : Select .1 input for Mux21
10 : Select .2 input for Mux21
11 : Select .3 input for Mux21

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9-8MUX20R/W0hSelect Bits for OUTPUT8 Mux20:

00 : Select .0 input for Mux20
01 : Select .1 input for Mux20
10 : Select .2 input for Mux20
11 : Select .3 input for Mux20

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7-6MUX19R/W0hSelect Bits for OUTPUT8 Mux19:

00 : Select .0 input for Mux19
01 : Select .1 input for Mux19
10 : Select .2 input for Mux19
11 : Select .3 input for Mux19

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5-4MUX18R/W0hSelect Bits for OUTPUT8 Mux18:

00 : Select .0 input for Mux18
01 : Select .1 input for Mux18
10 : Select .2 input for Mux18
11 : Select .3 input for Mux18

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3-2MUX17R/W0hSelect Bits for OUTPUT8 Mux17:

00 : Select .0 input for Mux17
01 : Select .1 input for Mux17
10 : Select .2 input for Mux17
11 : Select .3 input for Mux17

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1-0MUX16R/W0hSelect Bits for OUTPUT8 Mux16:

00 : Select .0 input for Mux16
01 : Select .1 input for Mux16
10 : Select .2 input for Mux16
11 : Select .3 input for Mux16

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16.3.8.31 OUTPUT8MUX32TO47CFG Register (Offset = 3Ch) [Reset = 00000000h]

OUTPUT8MUX32TO47CFG is shown in Figure 16-197 and described in Table 16-213.

Return to the Summary Table.

Output X-BAR Mux Configuration for Output 8

Figure 16-197 OUTPUT8MUX32TO47CFG Register
31302928272625242322212019181716
MUX47MUX46MUX45MUX44MUX43MUX42MUX41MUX40
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
1514131211109876543210
MUX39MUX38MUX37MUX36MUX35MUX34MUX33MUX32
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 16-213 OUTPUT8MUX32TO47CFG Register Field Descriptions
BitFieldTypeResetDescription
31-30MUX47R/W0hSelect Bits for OUTPUT8 MUX47:

00 : Select .0 input for MUX47
01 : Select .1 input for MUX47
10 : Select .2 input for MUX47
11: Select .3 input for MUX47

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29-28MUX46R/W0hSelect Bits for OUTPUT8 MUX46:

00 : Select .0 input for MUX46
01 : Select .1 input for MUX46
10 : Select .2 input for MUX46
11: Select .3 input for MUX46

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27-26MUX45R/W0hSelect Bits for OUTPUT8 MUX45:

00 : Select .0 input for MUX45
01 : Select .1 input for MUX45
10 : Select .2 input for MUX45
11: Select .3 input for MUX45

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25-24MUX44R/W0hSelect Bits for OUTPUT8 MUX44:

00 : Select .0 input for MUX44
01 : Select .1 input for MUX44
10 : Select .2 input for MUX44
11: Select .3 input for MUX44

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23-22MUX43R/W0hSelect Bits for OUTPUT8 MUX43:

00 : Select .0 input for MUX43
01 : Select .1 input for MUX43
10 : Select .2 input for MUX43
11: Select .3 input for MUX43

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21-20MUX42R/W0hSelect Bits for OUTPUT8 MUX42:

00 : Select .0 input for MUX42
01 : Select .1 input for MUX42
10 : Select .2 input for MUX42
11: Select .3 input for MUX42

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19-18MUX41R/W0hSelect Bits for OUTPUT8 MUX41:

00 : Select .0 input for MUX41
01 : Select .1 input for MUX41
10 : Select .2 input for MUX41
11: Select .3 input for MUX41

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17-16MUX40R/W0hSelect Bits for OUTPUT8 MUX40:

00 : Select .0 input for MUX40
01 : Select .1 input for MUX40
10 : Select .2 input for MUX40
11: Select .3 input for MUX40

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15-14MUX39R/W0hSelect Bits for OUTPUT8 MUX39:

00 : Select .0 input for MUX39
01 : Select .1 input for MUX39
10 : Select .2 input for MUX39
11: Select .3 input for MUX39

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13-12MUX38R/W0hSelect Bits for OUTPUT8 MUX38:

00 : Select .0 input for MUX38
01 : Select .1 input for MUX38
10 : Select .2 input for MUX38
11: Select .3 input for MUX38

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11-10MUX37R/W0hSelect Bits for OUTPUT8 MUX37:

00 : Select .0 input for MUX37
01 : Select .1 input for MUX37
10 : Select .2 input for MUX37
11: Select .3 input for MUX37

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9-8MUX36R/W0hSelect Bits for OUTPUT8 MUX36:

00 : Select .0 input for MUX36
01 : Select .1 input for MUX36
10 : Select .2 input for MUX36
11: Select .3 input for MUX36

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7-6MUX35R/W0hSelect Bits for OUTPUT8 MUX35:

00 : Select .0 input for MUX35
01 : Select .1 input for MUX35
10 : Select .2 input for MUX35
11: Select .3 input for MUX35

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5-4MUX34R/W0hSelect Bits for OUTPUT8 MUX34:

00 : Select .0 input for MUX34
01 : Select .1 input for MUX34
10 : Select .2 input for MUX34
11: Select .3 input for MUX34

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3-2MUX33R/W0hSelect Bits for OUTPUT8 MUX33:

00 : Select .0 input for MUX33
01 : Select .1 input for MUX33
10 : Select .2 input for MUX33
11: Select .3 input for MUX33

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1-0MUX32R/W0hSelect Bits for OUTPUT8 MUX32:

00 : Select .0 input for MUX32
01 : Select .1 input for MUX32
10 : Select .2 input for MUX32
11: Select .3 input for MUX32

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16.3.8.32 OUTPUT8MUX48TO63CFG Register (Offset = 3Eh) [Reset = 00000000h]

OUTPUT8MUX48TO63CFG is shown in Figure 16-198 and described in Table 16-214.

Return to the Summary Table.

Output X-BAR Mux Configuration for Output 8

Figure 16-198 OUTPUT8MUX48TO63CFG Register
31302928272625242322212019181716
MUX63MUX62MUX61MUX60MUX59MUX58MUX57MUX56
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
1514131211109876543210
MUX55MUX54MUX53MUX52MUX51MUX50MUX49MUX48
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 16-214 OUTPUT8MUX48TO63CFG Register Field Descriptions
BitFieldTypeResetDescription
31-30MUX63R/W0hSelect Bits for OUTPUT8 MUX63:

00 : Select .0 input for MUX63
01 : Select .1 input for MUX63
10 : Select .2 input for MUX63
11: Select .3 input for MUX63

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29-28MUX62R/W0hSelect Bits for OUTPUT8 MUX62:

00 : Select .0 input for MUX62
01 : Select .1 input for MUX62
10 : Select .2 input for MUX62
11: Select .3 input for MUX62

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27-26MUX61R/W0hSelect Bits for OUTPUT8 MUX61:

00 : Select .0 input for MUX61
01 : Select .1 input for MUX61
10 : Select .2 input for MUX61
11: Select .3 input for MUX61

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25-24MUX60R/W0hSelect Bits for OUTPUT8 MUX60:

00 : Select .0 input for MUX60
01 : Select .1 input for MUX60
10 : Select .2 input for MUX60
11: Select .3 input for MUX60

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23-22MUX59R/W0hSelect Bits for OUTPUT8 MUX59:

00 : Select .0 input for MUX59
01 : Select .1 input for MUX59
10 : Select .2 input for MUX59
11: Select .3 input for MUX59

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21-20MUX58R/W0hSelect Bits for OUTPUT8 MUX58:

00 : Select .0 input for MUX58
01 : Select .1 input for MUX58
10 : Select .2 input for MUX58
11: Select .3 input for MUX58

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19-18MUX57R/W0hSelect Bits for OUTPUT8 MUX57:

00 : Select .0 input for MUX57
01 : Select .1 input for MUX57
10 : Select .2 input for MUX57
11: Select .3 input for MUX57

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17-16MUX56R/W0hSelect Bits for OUTPUT8 MUX56:

00 : Select .0 input for MUX56
01 : Select .1 input for MUX56
10 : Select .2 input for MUX56
11: Select .3 input for MUX56

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15-14MUX55R/W0hSelect Bits for OUTPUT8 MUX55:

00 : Select .0 input for MUX55
01 : Select .1 input for MUX55
10 : Select .2 input for MUX55
11: Select .3 input for MUX55

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13-12MUX54R/W0hSelect Bits for OUTPUT8 MUX54:

00 : Select .0 input for MUX54
01 : Select .1 input for MUX54
10 : Select .2 input for MUX54
11: Select .3 input for MUX54

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11-10MUX53R/W0hSelect Bits for OUTPUT8 MUX53:

00 : Select .0 input for MUX53
01 : Select .1 input for MUX53
10 : Select .2 input for MUX53
11: Select .3 input for MUX53

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9-8MUX52R/W0hSelect Bits for OUTPUT8 MUX52:

00 : Select .0 input for MUX52
01 : Select .1 input for MUX52
10 : Select .2 input for MUX52
11: Select .3 input for MUX52

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7-6MUX51R/W0hSelect Bits for OUTPUT8 MUX51:

00 : Select .0 input for MUX51
01 : Select .1 input for MUX51
10 : Select .2 input for MUX51
11: Select .3 input for MUX51

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5-4MUX50R/W0hSelect Bits for OUTPUT8 MUX50:

00 : Select .0 input for MUX50
01 : Select .1 input for MUX50
10 : Select .2 input for MUX50
11: Select .3 input for MUX50

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3-2MUX49R/W0hSelect Bits for OUTPUT8 MUX49:

00 : Select .0 input for MUX49
01 : Select .1 input for MUX49
10 : Select .2 input for MUX49
11: Select .3 input for MUX49

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1-0MUX48R/W0hSelect Bits for OUTPUT8 MUX48:

00 : Select .0 input for MUX48
01 : Select .1 input for MUX48
10 : Select .2 input for MUX48
11: Select .3 input for MUX48

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16.3.8.33 OUTPUT1MUXENABLE Register (Offset = 40h) [Reset = 00000000h]

OUTPUT1MUXENABLE is shown in Figure 16-199 and described in Table 16-215.

Return to the Summary Table.

Output X-BAR Mux Enable for Output 1

Figure 16-199 OUTPUT1MUXENABLE Register
3130292827262524
MUX31MUX30MUX29MUX28MUX27MUX26MUX25MUX24
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
2322212019181716
MUX23MUX22MUX21MUX20MUX19MUX18MUX17MUX16
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
15141312111098
MUX15MUX14MUX13MUX12MUX11MUX10MUX9MUX8
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
76543210
MUX7MUX6MUX5MUX4MUX3MUX2MUX1MUX0
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 16-215 OUTPUT1MUXENABLE Register Field Descriptions
BitFieldTypeResetDescription
31MUX31R/W0hSelects the output of Mux31 to drive OUTPUT1 of OUTPUT-XBAR

0: Respective output of Mux31 is disabled to drive the OUTPUT1 of OUTPUT-XBAR
1: Respective output of Mux31 is enabled to drive the OUTPUT1 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

30MUX30R/W0hSelects the output of Mux30 to drive OUTPUT1 of OUTPUT-XBAR

0: Respective output of Mux30 is disabled to drive the OUTPUT1 of OUTPUT-XBAR
1: Respective output of Mux30 is enabled to drive the OUTPUT1 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29MUX29R/W0hSelects the output of Mux29 to drive OUTPUT1 of OUTPUT-XBAR

0: Respective output of Mux29 is disabled to drive the OUTPUT1 of OUTPUT-XBAR
1: Respective output of Mux29 is enabled to drive the OUTPUT1 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

28MUX28R/W0hSelects the output of Mux28 to drive OUTPUT1 of OUTPUT-XBAR

0: Respective output of Mux28 is disabled to drive the OUTPUT1 of OUTPUT-XBAR
1: Respective output of Mux28 is enabled to drive the OUTPUT1 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27MUX27R/W0hSelects the output of Mux27 to drive OUTPUT1 of OUTPUT-XBAR

0: Respective output of Mux27 is disabled to drive the OUTPUT1 of OUTPUT-XBAR
1: Respective output of Mux27 is enabled to drive the OUTPUT1 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

26MUX26R/W0hSelects the output of Mux26 to drive OUTPUT1 of OUTPUT-XBAR

0: Respective output of Mux26 is disabled to drive the OUTPUT1 of OUTPUT-XBAR
1: Respective output of Mux26 is enabled to drive the OUTPUT1 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25MUX25R/W0hSelects the output of Mux25 to drive OUTPUT1 of OUTPUT-XBAR

0: Respective output of Mux25 is disabled to drive the OUTPUT1 of OUTPUT-XBAR
1: Respective output of Mux25 is enabled to drive the OUTPUT1 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

24MUX24R/W0hSelects the output of Mux24 to drive OUTPUT1 of OUTPUT-XBAR

0: Respective output of Mux24 is disabled to drive the OUTPUT1 of OUTPUT-XBAR
1: Respective output of Mux24 is enabled to drive the OUTPUT1 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23MUX23R/W0hSelects the output of Mux23 to drive OUTPUT1 of OUTPUT-XBAR

0: Respective output of Mux23 is disabled to drive the OUTPUT1 of OUTPUT-XBAR
1: Respective output of Mux23 is enabled to drive the OUTPUT1 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

22MUX22R/W0hSelects the output of Mux22 to drive OUTPUT1 of OUTPUT-XBAR

0: Respective output of Mux22 is disabled to drive the OUTPUT1 of OUTPUT-XBAR
1: Respective output of Mux22 is enabled to drive the OUTPUT1 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21MUX21R/W0hSelects the output of Mux21 to drive OUTPUT1 of OUTPUT-XBAR

0: Respective output of Mux21 is disabled to drive the OUTPUT1 of OUTPUT-XBAR
1: Respective output of Mux21 is enabled to drive the OUTPUT1 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

20MUX20R/W0hSelects the output of Mux20 to drive OUTPUT1 of OUTPUT-XBAR

0: Respective output of Mux20 is disabled to drive the OUTPUT1 of OUTPUT-XBAR
1: Respective output of Mux20 is enabled to drive the OUTPUT1 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19MUX19R/W0hSelects the output of Mux19 to drive OUTPUT1 of OUTPUT-XBAR

0: Respective output of Mux19 is disabled to drive the OUTPUT1 of OUTPUT-XBAR
1: Respective output of Mux19 is enabled to drive the OUTPUT1 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

18MUX18R/W0hSelects the output of Mux18 to drive OUTPUT1 of OUTPUT-XBAR

0: Respective output of Mux18 is disabled to drive the OUTPUT1 of OUTPUT-XBAR
1: Respective output of Mux18 is enabled to drive the OUTPUT1 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17MUX17R/W0hSelects the output of Mux17 to drive OUTPUT1 of OUTPUT-XBAR

0: Respective output of Mux17 is disabled to drive the OUTPUT1 of OUTPUT-XBAR
1: Respective output of Mux17 is enabled to drive the OUTPUT1 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16MUX16R/W0hSelects the output of Mux16 to drive OUTPUT1 of OUTPUT-XBAR

0: Respective output of Mux16 is disabled to drive the OUTPUT1 of OUTPUT-XBAR
1: Respective output of Mux16 is enabled to drive the OUTPUT1 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15MUX15R/W0hSelects the output of Mux15 to drive OUTPUT1 of OUTPUT-XBAR

0: Respective output of Mux15 is disabled to drive the OUTPUT1 of OUTPUT-XBAR
1: Respective output of Mux15 is enabled to drive the OUTPUT1 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

14MUX14R/W0hSelects the output of Mux14 to drive OUTPUT1 of OUTPUT-XBAR

0: Respective output of Mux14 is disabled to drive the OUTPUT1 of OUTPUT-XBAR
1: Respective output of Mux14 is enabled to drive the OUTPUT1 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13MUX13R/W0hSelects the output of Mux13 to drive OUTPUT1 of OUTPUT-XBAR

0: Respective output of Mux13 is disabled to drive the OUTPUT1 of OUTPUT-XBAR
1: Respective output of Mux13 is enabled to drive the OUTPUT1 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

12MUX12R/W0hSelects the output of Mux12 to drive OUTPUT1 of OUTPUT-XBAR

0: Respective output of Mux12 is disabled to drive the OUTPUT1 of OUTPUT-XBAR
1: Respective output of Mux12 is enabled to drive the OUTPUT1 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11MUX11R/W0hSelects the output of Mux11 to drive OUTPUT1 of OUTPUT-XBAR

0: Respective output of Mux11 is disabled to drive the OUTPUT1 of OUTPUT-XBAR
1: Respective output of Mux11 is enabled to drive the OUTPUT1 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

10MUX10R/W0hSelects the output of Mux10 to drive OUTPUT1 of OUTPUT-XBAR

0: Respective output of Mux10 is disabled to drive the OUTPUT1 of OUTPUT-XBAR
1: Respective output of Mux10 is enabled to drive the OUTPUT1 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9MUX9R/W0hSelects the output of Mux9 to drive OUTPUT1 of OUTPUT-XBAR

0: Respective output of Mux9 is disabled to drive the OUTPUT1 of OUTPUT-XBAR
1: Respective output of Mux9 is enabled to drive the OUTPUT1 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

8MUX8R/W0hSelects the output of Mux8 to drive OUTPUT1 of OUTPUT-XBAR

0: Respective output of Mux8 is disabled to drive the OUTPUT1 of OUTPUT-XBAR
1: Respective output of Mux8 is enabled to drive the OUTPUT1 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7MUX7R/W0hSelects the output of Mux7 to drive OUTPUT1 of OUTPUT-XBAR

0: Respective output of Mux7 is disabled to drive the OUTPUT1 of OUTPUT-XBAR
1: Respective output of Mux7 is enabled to drive the OUTPUT1 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

6MUX6R/W0hSelects the output of Mux6 to drive OUTPUT1 of OUTPUT-XBAR

0: Respective output of Mux6 is disabled to drive the OUTPUT1 of OUTPUT-XBAR
1: Respective output of Mux6 is enabled to drive the OUTPUT1 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5MUX5R/W0hSelects the output of Mux5 to drive OUTPUT1 of OUTPUT-XBAR

0: Respective output of Mux5 is disabled to drive the OUTPUT1 of OUTPUT-XBAR
1: Respective output of Mux5 is enabled to drive the OUTPUT1 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

4MUX4R/W0hSelects the output of Mux4 to drive OUTPUT1 of OUTPUT-XBAR

0: Respective output of Mux4 is disabled to drive the OUTPUT1 of OUTPUT-XBAR
1: Respective output of Mux4 is enabled to drive the OUTPUT1 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3MUX3R/W0hSelects the output of Mux3 to drive OUTPUT1 of OUTPUT-XBAR

0: Respective output of Mux3 is disabled to drive the OUTPUT1 of OUTPUT-XBAR
1: Respective output of Mux3 is enabled to drive the OUTPUT1 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

2MUX2R/W0hSelects the output of Mux2 to drive OUTPUT1 of OUTPUT-XBAR

0: Respective output of Mux2 is disabled to drive the OUTPUT1 of OUTPUT-XBAR
1: Respective output of Mux2 is enabled to drive the OUTPUT1 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1MUX1R/W0hSelects the output of Mux1 to drive OUTPUT1 of OUTPUT-XBAR

0: Respective output of Mux1 is disabled to drive the OUTPUT1 of OUTPUT-XBAR
1: Respective output of Mux1 is enabled to drive the OUTPUT1 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

0MUX0R/W0hSelects the output of mux0 to drive OUTPUT1 of OUTPUT-XBAR

0: Respective output of Mux0 is disabled to drive the OUTPUT1 of OUTPUT-XBAR
1: Respective output of Mux0 is enabled to drive the OUTPUT1 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16.3.8.34 OUTPUT1MUXENABLE32TO63 Register (Offset = 42h) [Reset = 00000000h]

OUTPUT1MUXENABLE32TO63 is shown in Figure 16-200 and described in Table 16-216.

Return to the Summary Table.

Output X-BAR Mux Enable for Output 1

Figure 16-200 OUTPUT1MUXENABLE32TO63 Register
3130292827262524
MUX63MUX62MUX61MUX60MUX59MUX58MUX57MUX56
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
2322212019181716
MUX55MUX54MUX53MUX52MUX51MUX50MUX49MUX48
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
15141312111098
MUX47MUX46MUX45MUX44MUX43MUX42MUX41MUX40
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
76543210
MUX39MUX38MUX37MUX36MUX35MUX34MUX33MUX32
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 16-216 OUTPUT1MUXENABLE32TO63 Register Field Descriptions
BitFieldTypeResetDescription
31MUX63R/W0hSelects the output of MUX63 to drive OUTPUT1 of OUTPUT-XBAR
0: Respective output of MUX63 is disabled to drive the OUTPUT1 of OUTPUT-XBAR
1: Respective output of MUX63 is enabled to drive the OUTPUT1 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

30MUX62R/W0hSelects the output of MUX62 to drive OUTPUT1 of OUTPUT-XBAR
0: Respective output of MUX62 is disabled to drive the OUTPUT1 of OUTPUT-XBAR
1: Respective output of MUX62 is enabled to drive the OUTPUT1 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29MUX61R/W0hSelects the output of MUX61 to drive OUTPUT1 of OUTPUT-XBAR
0: Respective output of MUX61 is disabled to drive the OUTPUT1 of OUTPUT-XBAR
1: Respective output of MUX61 is enabled to drive the OUTPUT1 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

28MUX60R/W0hSelects the output of MUX60 to drive OUTPUT1 of OUTPUT-XBAR
0: Respective output of MUX60 is disabled to drive the OUTPUT1 of OUTPUT-XBAR
1: Respective output of MUX60 is enabled to drive the OUTPUT1 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27MUX59R/W0hSelects the output of MUX59 to drive OUTPUT1 of OUTPUT-XBAR
0: Respective output of MUX59 is disabled to drive the OUTPUT1 of OUTPUT-XBAR
1: Respective output of MUX59 is enabled to drive the OUTPUT1 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

26MUX58R/W0hSelects the output of MUX58 to drive OUTPUT1 of OUTPUT-XBAR
0: Respective output of MUX58 is disabled to drive the OUTPUT1 of OUTPUT-XBAR
1: Respective output of MUX58 is enabled to drive the OUTPUT1 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25MUX57R/W0hSelects the output of MUX57 to drive OUTPUT1 of OUTPUT-XBAR
0: Respective output of MUX57 is disabled to drive the OUTPUT1 of OUTPUT-XBAR
1: Respective output of MUX57 is enabled to drive the OUTPUT1 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

24MUX56R/W0hSelects the output of MUX56 to drive OUTPUT1 of OUTPUT-XBAR
0: Respective output of MUX56 is disabled to drive the OUTPUT1 of OUTPUT-XBAR
1: Respective output of MUX56 is enabled to drive the OUTPUT1 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23MUX55R/W0hSelects the output of MUX55 to drive OUTPUT1 of OUTPUT-XBAR
0: Respective output of MUX55 is disabled to drive the OUTPUT1 of OUTPUT-XBAR
1: Respective output of MUX55 is enabled to drive the OUTPUT1 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

22MUX54R/W0hSelects the output of MUX54 to drive OUTPUT1 of OUTPUT-XBAR
0: Respective output of MUX54 is disabled to drive the OUTPUT1 of OUTPUT-XBAR
1: Respective output of MUX54 is enabled to drive the OUTPUT1 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21MUX53R/W0hSelects the output of MUX53 to drive OUTPUT1 of OUTPUT-XBAR
0: Respective output of MUX53 is disabled to drive the OUTPUT1 of OUTPUT-XBAR
1: Respective output of MUX53 is enabled to drive the OUTPUT1 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

20MUX52R/W0hSelects the output of MUX52 to drive OUTPUT1 of OUTPUT-XBAR
0: Respective output of MUX52 is disabled to drive the OUTPUT1 of OUTPUT-XBAR
1: Respective output of MUX52 is enabled to drive the OUTPUT1 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19MUX51R/W0hSelects the output of MUX51 to drive OUTPUT1 of OUTPUT-XBAR
0: Respective output of MUX51 is disabled to drive the OUTPUT1 of OUTPUT-XBAR
1: Respective output of MUX51 is enabled to drive the OUTPUT1 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

18MUX50R/W0hSelects the output of MUX50 to drive OUTPUT1 of OUTPUT-XBAR
0: Respective output of MUX50 is disabled to drive the OUTPUT1 of OUTPUT-XBAR
1: Respective output of MUX50 is enabled to drive the OUTPUT1 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17MUX49R/W0hSelects the output of MUX49 to drive OUTPUT1 of OUTPUT-XBAR
0: Respective output of MUX49 is disabled to drive the OUTPUT1 of OUTPUT-XBAR
1: Respective output of MUX49 is enabled to drive the OUTPUT1 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16MUX48R/W0hSelects the output of MUX48 to drive OUTPUT1 of OUTPUT-XBAR
0: Respective output of MUX48 is disabled to drive the OUTPUT1 of OUTPUT-XBAR
1: Respective output of MUX48 is enabled to drive the OUTPUT1 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15MUX47R/W0hSelects the output of MUX47 to drive OUTPUT1 of OUTPUT-XBAR
0: Respective output of MUX47 is disabled to drive the OUTPUT1 of OUTPUT-XBAR
1: Respective output of MUX47 is enabled to drive the OUTPUT1 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

14MUX46R/W0hSelects the output of MUX46 to drive OUTPUT1 of OUTPUT-XBAR
0: Respective output of MUX46 is disabled to drive the OUTPUT1 of OUTPUT-XBAR
1: Respective output of MUX46 is enabled to drive the OUTPUT1 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13MUX45R/W0hSelects the output of MUX45 to drive OUTPUT1 of OUTPUT-XBAR
0: Respective output of MUX45 is disabled to drive the OUTPUT1 of OUTPUT-XBAR
1: Respective output of MUX45 is enabled to drive the OUTPUT1 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

12MUX44R/W0hSelects the output of MUX44 to drive OUTPUT1 of OUTPUT-XBAR
0: Respective output of MUX44 is disabled to drive the OUTPUT1 of OUTPUT-XBAR
1: Respective output of MUX44 is enabled to drive the OUTPUT1 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11MUX43R/W0hSelects the output of MUX43 to drive OUTPUT1 of OUTPUT-XBAR
0: Respective output of MUX43 is disabled to drive the OUTPUT1 of OUTPUT-XBAR
1: Respective output of MUX43 is enabled to drive the OUTPUT1 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

10MUX42R/W0hSelects the output of MUX42 to drive OUTPUT1 of OUTPUT-XBAR
0: Respective output of MUX42 is disabled to drive the OUTPUT1 of OUTPUT-XBAR
1: Respective output of MUX42 is enabled to drive the OUTPUT1 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9MUX41R/W0hSelects the output of MUX41 to drive OUTPUT1 of OUTPUT-XBAR
0: Respective output of MUX41 is disabled to drive the OUTPUT1 of OUTPUT-XBAR
1: Respective output of MUX41 is enabled to drive the OUTPUT1 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

8MUX40R/W0hSelects the output of MUX40 to drive OUTPUT1 of OUTPUT-XBAR
0: Respective output of MUX40 is disabled to drive the OUTPUT1 of OUTPUT-XBAR
1: Respective output of MUX40 is enabled to drive the OUTPUT1 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7MUX39R/W0hSelects the output of MUX39 to drive OUTPUT1 of OUTPUT-XBAR
0: Respective output of MUX39 is disabled to drive the OUTPUT1 of OUTPUT-XBAR
1: Respective output of MUX39 is enabled to drive the OUTPUT1 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

6MUX38R/W0hSelects the output of MUX38 to drive OUTPUT1 of OUTPUT-XBAR
0: Respective output of MUX38 is disabled to drive the OUTPUT1 of OUTPUT-XBAR
1: Respective output of MUX38 is enabled to drive the OUTPUT1 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5MUX37R/W0hSelects the output of MUX37 to drive OUTPUT1 of OUTPUT-XBAR
0: Respective output of MUX37 is disabled to drive the OUTPUT1 of OUTPUT-XBAR
1: Respective output of MUX37 is enabled to drive the OUTPUT1 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

4MUX36R/W0hSelects the output of MUX36 to drive OUTPUT1 of OUTPUT-XBAR
0: Respective output of MUX36 is disabled to drive the OUTPUT1 of OUTPUT-XBAR
1: Respective output of MUX36 is enabled to drive the OUTPUT1 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3MUX35R/W0hSelects the output of MUX35 to drive OUTPUT1 of OUTPUT-XBAR
0: Respective output of MUX35 is disabled to drive the OUTPUT1 of OUTPUT-XBAR
1: Respective output of MUX35 is enabled to drive the OUTPUT1 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

2MUX34R/W0hSelects the output of MUX34 to drive OUTPUT1 of OUTPUT-XBAR
0: Respective output of MUX34 is disabled to drive the OUTPUT1 of OUTPUT-XBAR
1: Respective output of MUX34 is enabled to drive the OUTPUT1 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1MUX33R/W0hSelects the output of MUX33 to drive OUTPUT1 of OUTPUT-XBAR
0: Respective output of MUX33 is disabled to drive the OUTPUT1 of OUTPUT-XBAR
1: Respective output of MUX33 is enabled to drive the OUTPUT1 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

0MUX32R/W0hSelects the output of MUX32 to drive OUTPUT1 of OUTPUT-XBAR
0: Respective output of MUX32 is disabled to drive the OUTPUT1 of OUTPUT-XBAR
1: Respective output of MUX32 is enabled to drive the OUTPUT1 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16.3.8.35 OUTPUT2MUXENABLE Register (Offset = 44h) [Reset = 00000000h]

OUTPUT2MUXENABLE is shown in Figure 16-201 and described in Table 16-217.

Return to the Summary Table.

Output X-BAR Mux Enable for Output 2

Figure 16-201 OUTPUT2MUXENABLE Register
3130292827262524
MUX31MUX30MUX29MUX28MUX27MUX26MUX25MUX24
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
2322212019181716
MUX23MUX22MUX21MUX20MUX19MUX18MUX17MUX16
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
15141312111098
MUX15MUX14MUX13MUX12MUX11MUX10MUX9MUX8
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
76543210
MUX7MUX6MUX5MUX4MUX3MUX2MUX1MUX0
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 16-217 OUTPUT2MUXENABLE Register Field Descriptions
BitFieldTypeResetDescription
31MUX31R/W0hSelects the output of Mux31 to drive OUTPUT2 of OUTPUT-XBAR

0: Respective output of Mux31 is disabled to drive the OUTPUT2 of OUTPUT-XBAR
1: Respective output of Mux31 is enabled to drive the OUTPUT2 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

30MUX30R/W0hSelects the output of Mux30 to drive OUTPUT2 of OUTPUT-XBAR

0: Respective output of Mux30 is disabled to drive the OUTPUT2 of OUTPUT-XBAR
1: Respective output of Mux30 is enabled to drive the OUTPUT2 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29MUX29R/W0hSelects the output of Mux29 to drive OUTPUT2 of OUTPUT-XBAR

0: Respective output of Mux29 is disabled to drive the OUTPUT2 of OUTPUT-XBAR
1: Respective output of Mux29 is enabled to drive the OUTPUT2 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

28MUX28R/W0hSelects the output of Mux28 to drive OUTPUT2 of OUTPUT-XBAR

0: Respective output of Mux28 is disabled to drive the OUTPUT2 of OUTPUT-XBAR
1: Respective output of Mux28 is enabled to drive the OUTPUT2 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27MUX27R/W0hSelects the output of Mux27 to drive OUTPUT2 of OUTPUT-XBAR

0: Respective output of Mux27 is disabled to drive the OUTPUT2 of OUTPUT-XBAR
1: Respective output of Mux27 is enabled to drive the OUTPUT2 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

26MUX26R/W0hSelects the output of Mux26 to drive OUTPUT2 of OUTPUT-XBAR

0: Respective output of Mux26 is disabled to drive the OUTPUT2 of OUTPUT-XBAR
1: Respective output of Mux26 is enabled to drive the OUTPUT2 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25MUX25R/W0hSelects the output of Mux25 to drive OUTPUT2 of OUTPUT-XBAR

0: Respective output of Mux25 is disabled to drive the OUTPUT2 of OUTPUT-XBAR
1: Respective output of Mux25 is enabled to drive the OUTPUT2 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

24MUX24R/W0hSelects the output of Mux24 to drive OUTPUT2 of OUTPUT-XBAR

0: Respective output of Mux24 is disabled to drive the OUTPUT2 of OUTPUT-XBAR
1: Respective output of Mux24 is enabled to drive the OUTPUT2 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23MUX23R/W0hSelects the output of Mux23 to drive OUTPUT2 of OUTPUT-XBAR

0: Respective output of Mux23 is disabled to drive the OUTPUT2 of OUTPUT-XBAR
1: Respective output of Mux23 is enabled to drive the OUTPUT2 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

22MUX22R/W0hSelects the output of Mux22 to drive OUTPUT2 of OUTPUT-XBAR

0: Respective output of Mux22 is disabled to drive the OUTPUT2 of OUTPUT-XBAR
1: Respective output of Mux22 is enabled to drive the OUTPUT2 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21MUX21R/W0hSelects the output of Mux21 to drive OUTPUT2 of OUTPUT-XBAR

0: Respective output of Mux21 is disabled to drive the OUTPUT2 of OUTPUT-XBAR
1: Respective output of Mux21 is enabled to drive the OUTPUT2 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

20MUX20R/W0hSelects the output of Mux20 to drive OUTPUT2 of OUTPUT-XBAR

0: Respective output of Mux20 is disabled to drive the OUTPUT2 of OUTPUT-XBAR
1: Respective output of Mux20 is enabled to drive the OUTPUT2 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19MUX19R/W0hSelects the output of Mux19 to drive OUTPUT2 of OUTPUT-XBAR

0: Respective output of Mux19 is disabled to drive the OUTPUT2 of OUTPUT-XBAR
1: Respective output of Mux19 is enabled to drive the OUTPUT2 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

18MUX18R/W0hSelects the output of Mux18 to drive OUTPUT2 of OUTPUT-XBAR

0: Respective output of Mux18 is disabled to drive the OUTPUT2 of OUTPUT-XBAR
1: Respective output of Mux18 is enabled to drive the OUTPUT2 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17MUX17R/W0hSelects the output of Mux17 to drive OUTPUT2 of OUTPUT-XBAR

0: Respective output of Mux17 is disabled to drive the OUTPUT2 of OUTPUT-XBAR
1: Respective output of Mux17 is enabled to drive the OUTPUT2 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16MUX16R/W0hSelects the output of Mux16 to drive OUTPUT2 of OUTPUT-XBAR

0: Respective output of Mux16 is disabled to drive the OUTPUT2 of OUTPUT-XBAR
1: Respective output of Mux16 is enabled to drive the OUTPUT2 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15MUX15R/W0hSelects the output of Mux15 to drive OUTPUT2 of OUTPUT-XBAR

0: Respective output of Mux15 is disabled to drive the OUTPUT2 of OUTPUT-XBAR
1: Respective output of Mux15 is enabled to drive the OUTPUT2 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

14MUX14R/W0hSelects the output of Mux14 to drive OUTPUT2 of OUTPUT-XBAR

0: Respective output of Mux14 is disabled to drive the OUTPUT2 of OUTPUT-XBAR
1: Respective output of Mux14 is enabled to drive the OUTPUT2 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13MUX13R/W0hSelects the output of Mux13 to drive OUTPUT2 of OUTPUT-XBAR

0: Respective output of Mux13 is disabled to drive the OUTPUT2 of OUTPUT-XBAR
1: Respective output of Mux13 is enabled to drive the OUTPUT2 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

12MUX12R/W0hSelects the output of Mux12 to drive OUTPUT2 of OUTPUT-XBAR

0: Respective output of Mux12 is disabled to drive the OUTPUT2 of OUTPUT-XBAR
1: Respective output of Mux12 is enabled to drive the OUTPUT2 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11MUX11R/W0hSelects the output of Mux11 to drive OUTPUT2 of OUTPUT-XBAR

0: Respective output of Mux11 is disabled to drive the OUTPUT2 of OUTPUT-XBAR
1: Respective output of Mux11 is enabled to drive the OUTPUT2 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

10MUX10R/W0hSelects the output of Mux10 to drive OUTPUT2 of OUTPUT-XBAR

0: Respective output of Mux10 is disabled to drive the OUTPUT2 of OUTPUT-XBAR
1: Respective output of Mux10 is enabled to drive the OUTPUT2 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9MUX9R/W0hSelects the output of Mux9 to drive OUTPUT2 of OUTPUT-XBAR

0: Respective output of Mux9 is disabled to drive the OUTPUT2 of OUTPUT-XBAR
1: Respective output of Mux9 is enabled to drive the OUTPUT2 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

8MUX8R/W0hSelects the output of Mux8 to drive OUTPUT2 of OUTPUT-XBAR

0: Respective output of Mux8 is disabled to drive the OUTPUT2 of OUTPUT-XBAR
1: Respective output of Mux8 is enabled to drive the OUTPUT2 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7MUX7R/W0hSelects the output of Mux7 to drive OUTPUT2 of OUTPUT-XBAR

0: Respective output of Mux7 is disabled to drive the OUTPUT2 of OUTPUT-XBAR
1: Respective output of Mux7 is enabled to drive the OUTPUT2 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

6MUX6R/W0hSelects the output of Mux6 to drive OUTPUT2 of OUTPUT-XBAR

0: Respective output of Mux6 is disabled to drive the OUTPUT2 of OUTPUT-XBAR
1: Respective output of Mux6 is enabled to drive the OUTPUT2 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5MUX5R/W0hSelects the output of Mux5 to drive OUTPUT2 of OUTPUT-XBAR

0: Respective output of Mux5 is disabled to drive the OUTPUT2 of OUTPUT-XBAR
1: Respective output of Mux5 is enabled to drive the OUTPUT2 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

4MUX4R/W0hSelects the output of Mux4 to drive OUTPUT2 of OUTPUT-XBAR

0: Respective output of Mux4 is disabled to drive the OUTPUT2 of OUTPUT-XBAR
1: Respective output of Mux4 is enabled to drive the OUTPUT2 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3MUX3R/W0hSelects the output of Mux3 to drive OUTPUT2 of OUTPUT-XBAR

0: Respective output of Mux3 is disabled to drive the OUTPUT2 of OUTPUT-XBAR
1: Respective output of Mux3 is enabled to drive the OUTPUT2 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

2MUX2R/W0hSelects the output of Mux2 to drive OUTPUT2 of OUTPUT-XBAR

0: Respective output of Mux2 is disabled to drive the OUTPUT2 of OUTPUT-XBAR
1: Respective output of Mux2 is enabled to drive the OUTPUT2 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1MUX1R/W0hSelects the output of Mux1 to drive OUTPUT2 of OUTPUT-XBAR

0: Respective output of Mux1 is disabled to drive the OUTPUT2 of OUTPUT-XBAR
1: Respective output of Mux1 is enabled to drive the OUTPUT2 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

0MUX0R/W0hSelects the output of mux0 to drive OUTPUT2 of OUTPUT-XBAR

0: Respective output of Mux0 is disabled to drive the OUTPUT2 of OUTPUT-XBAR
1: Respective output of Mux0 is enabled to drive the OUTPUT2 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16.3.8.36 OUTPUT2MUXENABLE32TO63 Register (Offset = 46h) [Reset = 00000000h]

OUTPUT2MUXENABLE32TO63 is shown in Figure 16-202 and described in Table 16-218.

Return to the Summary Table.

Output X-BAR Mux Enable for Output 2

Figure 16-202 OUTPUT2MUXENABLE32TO63 Register
3130292827262524
MUX63MUX62MUX61MUX60MUX59MUX58MUX57MUX56
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
2322212019181716
MUX55MUX54MUX53MUX52MUX51MUX50MUX49MUX48
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
15141312111098
MUX47MUX46MUX45MUX44MUX43MUX42MUX41MUX40
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
76543210
MUX39MUX38MUX37MUX36MUX35MUX34MUX33MUX32
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 16-218 OUTPUT2MUXENABLE32TO63 Register Field Descriptions
BitFieldTypeResetDescription
31MUX63R/W0hSelects the output of MUX63 to drive OUTPUT2 of OUTPUT-XBAR
0: Respective output of MUX63 is disabled to drive the OUTPUT2 of OUTPUT-XBAR
1: Respective output of MUX63 is enabled to drive the OUTPUT2 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

30MUX62R/W0hSelects the output of MUX62 to drive OUTPUT2 of OUTPUT-XBAR
0: Respective output of MUX62 is disabled to drive the OUTPUT2 of OUTPUT-XBAR
1: Respective output of MUX62 is enabled to drive the OUTPUT2 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29MUX61R/W0hSelects the output of MUX61 to drive OUTPUT2 of OUTPUT-XBAR
0: Respective output of MUX61 is disabled to drive the OUTPUT2 of OUTPUT-XBAR
1: Respective output of MUX61 is enabled to drive the OUTPUT2 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

28MUX60R/W0hSelects the output of MUX60 to drive OUTPUT2 of OUTPUT-XBAR
0: Respective output of MUX60 is disabled to drive the OUTPUT2 of OUTPUT-XBAR
1: Respective output of MUX60 is enabled to drive the OUTPUT2 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27MUX59R/W0hSelects the output of MUX59 to drive OUTPUT2 of OUTPUT-XBAR
0: Respective output of MUX59 is disabled to drive the OUTPUT2 of OUTPUT-XBAR
1: Respective output of MUX59 is enabled to drive the OUTPUT2 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

26MUX58R/W0hSelects the output of MUX58 to drive OUTPUT2 of OUTPUT-XBAR
0: Respective output of MUX58 is disabled to drive the OUTPUT2 of OUTPUT-XBAR
1: Respective output of MUX58 is enabled to drive the OUTPUT2 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25MUX57R/W0hSelects the output of MUX57 to drive OUTPUT2 of OUTPUT-XBAR
0: Respective output of MUX57 is disabled to drive the OUTPUT2 of OUTPUT-XBAR
1: Respective output of MUX57 is enabled to drive the OUTPUT2 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

24MUX56R/W0hSelects the output of MUX56 to drive OUTPUT2 of OUTPUT-XBAR
0: Respective output of MUX56 is disabled to drive the OUTPUT2 of OUTPUT-XBAR
1: Respective output of MUX56 is enabled to drive the OUTPUT2 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23MUX55R/W0hSelects the output of MUX55 to drive OUTPUT2 of OUTPUT-XBAR
0: Respective output of MUX55 is disabled to drive the OUTPUT2 of OUTPUT-XBAR
1: Respective output of MUX55 is enabled to drive the OUTPUT2 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

22MUX54R/W0hSelects the output of MUX54 to drive OUTPUT2 of OUTPUT-XBAR
0: Respective output of MUX54 is disabled to drive the OUTPUT2 of OUTPUT-XBAR
1: Respective output of MUX54 is enabled to drive the OUTPUT2 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21MUX53R/W0hSelects the output of MUX53 to drive OUTPUT2 of OUTPUT-XBAR
0: Respective output of MUX53 is disabled to drive the OUTPUT2 of OUTPUT-XBAR
1: Respective output of MUX53 is enabled to drive the OUTPUT2 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

20MUX52R/W0hSelects the output of MUX52 to drive OUTPUT2 of OUTPUT-XBAR
0: Respective output of MUX52 is disabled to drive the OUTPUT2 of OUTPUT-XBAR
1: Respective output of MUX52 is enabled to drive the OUTPUT2 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19MUX51R/W0hSelects the output of MUX51 to drive OUTPUT2 of OUTPUT-XBAR
0: Respective output of MUX51 is disabled to drive the OUTPUT2 of OUTPUT-XBAR
1: Respective output of MUX51 is enabled to drive the OUTPUT2 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

18MUX50R/W0hSelects the output of MUX50 to drive OUTPUT2 of OUTPUT-XBAR
0: Respective output of MUX50 is disabled to drive the OUTPUT2 of OUTPUT-XBAR
1: Respective output of MUX50 is enabled to drive the OUTPUT2 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17MUX49R/W0hSelects the output of MUX49 to drive OUTPUT2 of OUTPUT-XBAR
0: Respective output of MUX49 is disabled to drive the OUTPUT2 of OUTPUT-XBAR
1: Respective output of MUX49 is enabled to drive the OUTPUT2 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16MUX48R/W0hSelects the output of MUX48 to drive OUTPUT2 of OUTPUT-XBAR
0: Respective output of MUX48 is disabled to drive the OUTPUT2 of OUTPUT-XBAR
1: Respective output of MUX48 is enabled to drive the OUTPUT2 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15MUX47R/W0hSelects the output of MUX47 to drive OUTPUT2 of OUTPUT-XBAR
0: Respective output of MUX47 is disabled to drive the OUTPUT2 of OUTPUT-XBAR
1: Respective output of MUX47 is enabled to drive the OUTPUT2 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

14MUX46R/W0hSelects the output of MUX46 to drive OUTPUT2 of OUTPUT-XBAR
0: Respective output of MUX46 is disabled to drive the OUTPUT2 of OUTPUT-XBAR
1: Respective output of MUX46 is enabled to drive the OUTPUT2 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13MUX45R/W0hSelects the output of MUX45 to drive OUTPUT2 of OUTPUT-XBAR
0: Respective output of MUX45 is disabled to drive the OUTPUT2 of OUTPUT-XBAR
1: Respective output of MUX45 is enabled to drive the OUTPUT2 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

12MUX44R/W0hSelects the output of MUX44 to drive OUTPUT2 of OUTPUT-XBAR
0: Respective output of MUX44 is disabled to drive the OUTPUT2 of OUTPUT-XBAR
1: Respective output of MUX44 is enabled to drive the OUTPUT2 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11MUX43R/W0hSelects the output of MUX43 to drive OUTPUT2 of OUTPUT-XBAR
0: Respective output of MUX43 is disabled to drive the OUTPUT2 of OUTPUT-XBAR
1: Respective output of MUX43 is enabled to drive the OUTPUT2 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

10MUX42R/W0hSelects the output of MUX42 to drive OUTPUT2 of OUTPUT-XBAR
0: Respective output of MUX42 is disabled to drive the OUTPUT2 of OUTPUT-XBAR
1: Respective output of MUX42 is enabled to drive the OUTPUT2 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9MUX41R/W0hSelects the output of MUX41 to drive OUTPUT2 of OUTPUT-XBAR
0: Respective output of MUX41 is disabled to drive the OUTPUT2 of OUTPUT-XBAR
1: Respective output of MUX41 is enabled to drive the OUTPUT2 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

8MUX40R/W0hSelects the output of MUX40 to drive OUTPUT2 of OUTPUT-XBAR
0: Respective output of MUX40 is disabled to drive the OUTPUT2 of OUTPUT-XBAR
1: Respective output of MUX40 is enabled to drive the OUTPUT2 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7MUX39R/W0hSelects the output of MUX39 to drive OUTPUT2 of OUTPUT-XBAR
0: Respective output of MUX39 is disabled to drive the OUTPUT2 of OUTPUT-XBAR
1: Respective output of MUX39 is enabled to drive the OUTPUT2 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

6MUX38R/W0hSelects the output of MUX38 to drive OUTPUT2 of OUTPUT-XBAR
0: Respective output of MUX38 is disabled to drive the OUTPUT2 of OUTPUT-XBAR
1: Respective output of MUX38 is enabled to drive the OUTPUT2 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5MUX37R/W0hSelects the output of MUX37 to drive OUTPUT2 of OUTPUT-XBAR
0: Respective output of MUX37 is disabled to drive the OUTPUT2 of OUTPUT-XBAR
1: Respective output of MUX37 is enabled to drive the OUTPUT2 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

4MUX36R/W0hSelects the output of MUX36 to drive OUTPUT2 of OUTPUT-XBAR
0: Respective output of MUX36 is disabled to drive the OUTPUT2 of OUTPUT-XBAR
1: Respective output of MUX36 is enabled to drive the OUTPUT2 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3MUX35R/W0hSelects the output of MUX35 to drive OUTPUT2 of OUTPUT-XBAR
0: Respective output of MUX35 is disabled to drive the OUTPUT2 of OUTPUT-XBAR
1: Respective output of MUX35 is enabled to drive the OUTPUT2 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

2MUX34R/W0hSelects the output of MUX34 to drive OUTPUT2 of OUTPUT-XBAR
0: Respective output of MUX34 is disabled to drive the OUTPUT2 of OUTPUT-XBAR
1: Respective output of MUX34 is enabled to drive the OUTPUT2 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1MUX33R/W0hSelects the output of MUX33 to drive OUTPUT2 of OUTPUT-XBAR
0: Respective output of MUX33 is disabled to drive the OUTPUT2 of OUTPUT-XBAR
1: Respective output of MUX33 is enabled to drive the OUTPUT2 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

0MUX32R/W0hSelects the output of MUX32 to drive OUTPUT2 of OUTPUT-XBAR
0: Respective output of MUX32 is disabled to drive the OUTPUT2 of OUTPUT-XBAR
1: Respective output of MUX32 is enabled to drive the OUTPUT2 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16.3.8.37 OUTPUT3MUXENABLE Register (Offset = 48h) [Reset = 00000000h]

OUTPUT3MUXENABLE is shown in Figure 16-203 and described in Table 16-219.

Return to the Summary Table.

Output X-BAR Mux Enable for Output 3

Figure 16-203 OUTPUT3MUXENABLE Register
3130292827262524
MUX31MUX30MUX29MUX28MUX27MUX26MUX25MUX24
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
2322212019181716
MUX23MUX22MUX21MUX20MUX19MUX18MUX17MUX16
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
15141312111098
MUX15MUX14MUX13MUX12MUX11MUX10MUX9MUX8
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
76543210
MUX7MUX6MUX5MUX4MUX3MUX2MUX1MUX0
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 16-219 OUTPUT3MUXENABLE Register Field Descriptions
BitFieldTypeResetDescription
31MUX31R/W0hSelects the output of Mux31 to drive OUTPUT3 of OUTPUT-XBAR

0: Respective output of Mux31 is disabled to drive the OUTPUT3 of OUTPUT-XBAR
1: Respective output of Mux31 is enabled to drive the OUTPUT3 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

30MUX30R/W0hSelects the output of Mux30 to drive OUTPUT3 of OUTPUT-XBAR

0: Respective output of Mux30 is disabled to drive the OUTPUT3 of OUTPUT-XBAR
1: Respective output of Mux30 is enabled to drive the OUTPUT3 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29MUX29R/W0hSelects the output of Mux29 to drive OUTPUT3 of OUTPUT-XBAR

0: Respective output of Mux29 is disabled to drive the OUTPUT3 of OUTPUT-XBAR
1: Respective output of Mux29 is enabled to drive the OUTPUT3 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

28MUX28R/W0hSelects the output of Mux28 to drive OUTPUT3 of OUTPUT-XBAR

0: Respective output of Mux28 is disabled to drive the OUTPUT3 of OUTPUT-XBAR
1: Respective output of Mux28 is enabled to drive the OUTPUT3 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27MUX27R/W0hSelects the output of Mux27 to drive OUTPUT3 of OUTPUT-XBAR

0: Respective output of Mux27 is disabled to drive the OUTPUT3 of OUTPUT-XBAR
1: Respective output of Mux27 is enabled to drive the OUTPUT3 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

26MUX26R/W0hSelects the output of Mux26 to drive OUTPUT3 of OUTPUT-XBAR

0: Respective output of Mux26 is disabled to drive the OUTPUT3 of OUTPUT-XBAR
1: Respective output of Mux26 is enabled to drive the OUTPUT3 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25MUX25R/W0hSelects the output of Mux25 to drive OUTPUT3 of OUTPUT-XBAR

0: Respective output of Mux25 is disabled to drive the OUTPUT3 of OUTPUT-XBAR
1: Respective output of Mux25 is enabled to drive the OUTPUT3 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

24MUX24R/W0hSelects the output of Mux24 to drive OUTPUT3 of OUTPUT-XBAR

0: Respective output of Mux24 is disabled to drive the OUTPUT3 of OUTPUT-XBAR
1: Respective output of Mux24 is enabled to drive the OUTPUT3 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23MUX23R/W0hSelects the output of Mux23 to drive OUTPUT3 of OUTPUT-XBAR

0: Respective output of Mux23 is disabled to drive the OUTPUT3 of OUTPUT-XBAR
1: Respective output of Mux23 is enabled to drive the OUTPUT3 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

22MUX22R/W0hSelects the output of Mux22 to drive OUTPUT3 of OUTPUT-XBAR

0: Respective output of Mux22 is disabled to drive the OUTPUT3 of OUTPUT-XBAR
1: Respective output of Mux22 is enabled to drive the OUTPUT3 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21MUX21R/W0hSelects the output of Mux21 to drive OUTPUT3 of OUTPUT-XBAR

0: Respective output of Mux21 is disabled to drive the OUTPUT3 of OUTPUT-XBAR
1: Respective output of Mux21 is enabled to drive the OUTPUT3 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

20MUX20R/W0hSelects the output of Mux20 to drive OUTPUT3 of OUTPUT-XBAR

0: Respective output of Mux20 is disabled to drive the OUTPUT3 of OUTPUT-XBAR
1: Respective output of Mux20 is enabled to drive the OUTPUT3 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19MUX19R/W0hSelects the output of Mux19 to drive OUTPUT3 of OUTPUT-XBAR

0: Respective output of Mux19 is disabled to drive the OUTPUT3 of OUTPUT-XBAR
1: Respective output of Mux19 is enabled to drive the OUTPUT3 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

18MUX18R/W0hSelects the output of Mux18 to drive OUTPUT3 of OUTPUT-XBAR

0: Respective output of Mux18 is disabled to drive the OUTPUT3 of OUTPUT-XBAR
1: Respective output of Mux18 is enabled to drive the OUTPUT3 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17MUX17R/W0hSelects the output of Mux17 to drive OUTPUT3 of OUTPUT-XBAR

0: Respective output of Mux17 is disabled to drive the OUTPUT3 of OUTPUT-XBAR
1: Respective output of Mux17 is enabled to drive the OUTPUT3 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16MUX16R/W0hSelects the output of Mux16 to drive OUTPUT3 of OUTPUT-XBAR

0: Respective output of Mux16 is disabled to drive the OUTPUT3 of OUTPUT-XBAR
1: Respective output of Mux16 is enabled to drive the OUTPUT3 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15MUX15R/W0hSelects the output of Mux15 to drive OUTPUT3 of OUTPUT-XBAR

0: Respective output of Mux15 is disabled to drive the OUTPUT3 of OUTPUT-XBAR
1: Respective output of Mux15 is enabled to drive the OUTPUT3 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

14MUX14R/W0hSelects the output of Mux14 to drive OUTPUT3 of OUTPUT-XBAR

0: Respective output of Mux14 is disabled to drive the OUTPUT3 of OUTPUT-XBAR
1: Respective output of Mux14 is enabled to drive the OUTPUT3 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13MUX13R/W0hSelects the output of Mux13 to drive OUTPUT3 of OUTPUT-XBAR

0: Respective output of Mux13 is disabled to drive the OUTPUT3 of OUTPUT-XBAR
1: Respective output of Mux13 is enabled to drive the OUTPUT3 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

12MUX12R/W0hSelects the output of Mux12 to drive OUTPUT3 of OUTPUT-XBAR

0: Respective output of Mux12 is disabled to drive the OUTPUT3 of OUTPUT-XBAR
1: Respective output of Mux12 is enabled to drive the OUTPUT3 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11MUX11R/W0hSelects the output of Mux11 to drive OUTPUT3 of OUTPUT-XBAR

0: Respective output of Mux11 is disabled to drive the OUTPUT3 of OUTPUT-XBAR
1: Respective output of Mux11 is enabled to drive the OUTPUT3 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

10MUX10R/W0hSelects the output of Mux10 to drive OUTPUT3 of OUTPUT-XBAR

0: Respective output of Mux10 is disabled to drive the OUTPUT3 of OUTPUT-XBAR
1: Respective output of Mux10 is enabled to drive the OUTPUT3 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9MUX9R/W0hSelects the output of Mux9 to drive OUTPUT3 of OUTPUT-XBAR

0: Respective output of Mux9 is disabled to drive the OUTPUT3 of OUTPUT-XBAR
1: Respective output of Mux9 is enabled to drive the OUTPUT3 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

8MUX8R/W0hSelects the output of Mux8 to drive OUTPUT3 of OUTPUT-XBAR

0: Respective output of Mux8 is disabled to drive the OUTPUT3 of OUTPUT-XBAR
1: Respective output of Mux8 is enabled to drive the OUTPUT3 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7MUX7R/W0hSelects the output of Mux7 to drive OUTPUT3 of OUTPUT-XBAR

0: Respective output of Mux7 is disabled to drive the OUTPUT3 of OUTPUT-XBAR
1: Respective output of Mux7 is enabled to drive the OUTPUT3 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

6MUX6R/W0hSelects the output of Mux6 to drive OUTPUT3 of OUTPUT-XBAR

0: Respective output of Mux6 is disabled to drive the OUTPUT3 of OUTPUT-XBAR
1: Respective output of Mux6 is enabled to drive the OUTPUT3 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5MUX5R/W0hSelects the output of Mux5 to drive OUTPUT3 of OUTPUT-XBAR

0: Respective output of Mux5 is disabled to drive the OUTPUT3 of OUTPUT-XBAR
1: Respective output of Mux5 is enabled to drive the OUTPUT3 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

4MUX4R/W0hSelects the output of Mux4 to drive OUTPUT3 of OUTPUT-XBAR

0: Respective output of Mux4 is disabled to drive the OUTPUT3 of OUTPUT-XBAR
1: Respective output of Mux4 is enabled to drive the OUTPUT3 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3MUX3R/W0hSelects the output of Mux3 to drive OUTPUT3 of OUTPUT-XBAR

0: Respective output of Mux3 is disabled to drive the OUTPUT3 of OUTPUT-XBAR
1: Respective output of Mux3 is enabled to drive the OUTPUT3 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

2MUX2R/W0hSelects the output of Mux2 to drive OUTPUT3 of OUTPUT-XBAR

0: Respective output of Mux2 is disabled to drive the OUTPUT3 of OUTPUT-XBAR
1: Respective output of Mux2 is enabled to drive the OUTPUT3 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1MUX1R/W0hSelects the output of Mux1 to drive OUTPUT3 of OUTPUT-XBAR

0: Respective output of Mux1 is disabled to drive the OUTPUT3 of OUTPUT-XBAR
1: Respective output of Mux1 is enabled to drive the OUTPUT3 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

0MUX0R/W0hSelects the output of mux0 to drive OUTPUT3 of OUTPUT-XBAR

0: Respective output of Mux0 is disabled to drive the OUTPUT3 of OUTPUT-XBAR
1: Respective output of Mux0 is enabled to drive the OUTPUT3 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16.3.8.38 OUTPUT3MUXENABLE32TO63 Register (Offset = 4Ah) [Reset = 00000000h]

OUTPUT3MUXENABLE32TO63 is shown in Figure 16-204 and described in Table 16-220.

Return to the Summary Table.

Output X-BAR Mux Enable for Output 3

Figure 16-204 OUTPUT3MUXENABLE32TO63 Register
3130292827262524
MUX63MUX62MUX61MUX60MUX59MUX58MUX57MUX56
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
2322212019181716
MUX55MUX54MUX53MUX52MUX51MUX50MUX49MUX48
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
15141312111098
MUX47MUX46MUX45MUX44MUX43MUX42MUX41MUX40
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
76543210
MUX39MUX38MUX37MUX36MUX35MUX34MUX33MUX32
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 16-220 OUTPUT3MUXENABLE32TO63 Register Field Descriptions
BitFieldTypeResetDescription
31MUX63R/W0hSelects the output of MUX63 to drive OUTPUT3 of OUTPUT-XBAR
0: Respective output of MUX63 is disabled to drive the OUTPUT3 of OUTPUT-XBAR
1: Respective output of MUX63 is enabled to drive the OUTPUT3 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

30MUX62R/W0hSelects the output of MUX62 to drive OUTPUT3 of OUTPUT-XBAR
0: Respective output of MUX62 is disabled to drive the OUTPUT3 of OUTPUT-XBAR
1: Respective output of MUX62 is enabled to drive the OUTPUT3 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29MUX61R/W0hSelects the output of MUX61 to drive OUTPUT3 of OUTPUT-XBAR
0: Respective output of MUX61 is disabled to drive the OUTPUT3 of OUTPUT-XBAR
1: Respective output of MUX61 is enabled to drive the OUTPUT3 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

28MUX60R/W0hSelects the output of MUX60 to drive OUTPUT3 of OUTPUT-XBAR
0: Respective output of MUX60 is disabled to drive the OUTPUT3 of OUTPUT-XBAR
1: Respective output of MUX60 is enabled to drive the OUTPUT3 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27MUX59R/W0hSelects the output of MUX59 to drive OUTPUT3 of OUTPUT-XBAR
0: Respective output of MUX59 is disabled to drive the OUTPUT3 of OUTPUT-XBAR
1: Respective output of MUX59 is enabled to drive the OUTPUT3 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

26MUX58R/W0hSelects the output of MUX58 to drive OUTPUT3 of OUTPUT-XBAR
0: Respective output of MUX58 is disabled to drive the OUTPUT3 of OUTPUT-XBAR
1: Respective output of MUX58 is enabled to drive the OUTPUT3 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25MUX57R/W0hSelects the output of MUX57 to drive OUTPUT3 of OUTPUT-XBAR
0: Respective output of MUX57 is disabled to drive the OUTPUT3 of OUTPUT-XBAR
1: Respective output of MUX57 is enabled to drive the OUTPUT3 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

24MUX56R/W0hSelects the output of MUX56 to drive OUTPUT3 of OUTPUT-XBAR
0: Respective output of MUX56 is disabled to drive the OUTPUT3 of OUTPUT-XBAR
1: Respective output of MUX56 is enabled to drive the OUTPUT3 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23MUX55R/W0hSelects the output of MUX55 to drive OUTPUT3 of OUTPUT-XBAR
0: Respective output of MUX55 is disabled to drive the OUTPUT3 of OUTPUT-XBAR
1: Respective output of MUX55 is enabled to drive the OUTPUT3 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

22MUX54R/W0hSelects the output of MUX54 to drive OUTPUT3 of OUTPUT-XBAR
0: Respective output of MUX54 is disabled to drive the OUTPUT3 of OUTPUT-XBAR
1: Respective output of MUX54 is enabled to drive the OUTPUT3 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21MUX53R/W0hSelects the output of MUX53 to drive OUTPUT3 of OUTPUT-XBAR
0: Respective output of MUX53 is disabled to drive the OUTPUT3 of OUTPUT-XBAR
1: Respective output of MUX53 is enabled to drive the OUTPUT3 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

20MUX52R/W0hSelects the output of MUX52 to drive OUTPUT3 of OUTPUT-XBAR
0: Respective output of MUX52 is disabled to drive the OUTPUT3 of OUTPUT-XBAR
1: Respective output of MUX52 is enabled to drive the OUTPUT3 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19MUX51R/W0hSelects the output of MUX51 to drive OUTPUT3 of OUTPUT-XBAR
0: Respective output of MUX51 is disabled to drive the OUTPUT3 of OUTPUT-XBAR
1: Respective output of MUX51 is enabled to drive the OUTPUT3 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

18MUX50R/W0hSelects the output of MUX50 to drive OUTPUT3 of OUTPUT-XBAR
0: Respective output of MUX50 is disabled to drive the OUTPUT3 of OUTPUT-XBAR
1: Respective output of MUX50 is enabled to drive the OUTPUT3 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17MUX49R/W0hSelects the output of MUX49 to drive OUTPUT3 of OUTPUT-XBAR
0: Respective output of MUX49 is disabled to drive the OUTPUT3 of OUTPUT-XBAR
1: Respective output of MUX49 is enabled to drive the OUTPUT3 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16MUX48R/W0hSelects the output of MUX48 to drive OUTPUT3 of OUTPUT-XBAR
0: Respective output of MUX48 is disabled to drive the OUTPUT3 of OUTPUT-XBAR
1: Respective output of MUX48 is enabled to drive the OUTPUT3 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15MUX47R/W0hSelects the output of MUX47 to drive OUTPUT3 of OUTPUT-XBAR
0: Respective output of MUX47 is disabled to drive the OUTPUT3 of OUTPUT-XBAR
1: Respective output of MUX47 is enabled to drive the OUTPUT3 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

14MUX46R/W0hSelects the output of MUX46 to drive OUTPUT3 of OUTPUT-XBAR
0: Respective output of MUX46 is disabled to drive the OUTPUT3 of OUTPUT-XBAR
1: Respective output of MUX46 is enabled to drive the OUTPUT3 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13MUX45R/W0hSelects the output of MUX45 to drive OUTPUT3 of OUTPUT-XBAR
0: Respective output of MUX45 is disabled to drive the OUTPUT3 of OUTPUT-XBAR
1: Respective output of MUX45 is enabled to drive the OUTPUT3 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

12MUX44R/W0hSelects the output of MUX44 to drive OUTPUT3 of OUTPUT-XBAR
0: Respective output of MUX44 is disabled to drive the OUTPUT3 of OUTPUT-XBAR
1: Respective output of MUX44 is enabled to drive the OUTPUT3 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11MUX43R/W0hSelects the output of MUX43 to drive OUTPUT3 of OUTPUT-XBAR
0: Respective output of MUX43 is disabled to drive the OUTPUT3 of OUTPUT-XBAR
1: Respective output of MUX43 is enabled to drive the OUTPUT3 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

10MUX42R/W0hSelects the output of MUX42 to drive OUTPUT3 of OUTPUT-XBAR
0: Respective output of MUX42 is disabled to drive the OUTPUT3 of OUTPUT-XBAR
1: Respective output of MUX42 is enabled to drive the OUTPUT3 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9MUX41R/W0hSelects the output of MUX41 to drive OUTPUT3 of OUTPUT-XBAR
0: Respective output of MUX41 is disabled to drive the OUTPUT3 of OUTPUT-XBAR
1: Respective output of MUX41 is enabled to drive the OUTPUT3 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

8MUX40R/W0hSelects the output of MUX40 to drive OUTPUT3 of OUTPUT-XBAR
0: Respective output of MUX40 is disabled to drive the OUTPUT3 of OUTPUT-XBAR
1: Respective output of MUX40 is enabled to drive the OUTPUT3 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7MUX39R/W0hSelects the output of MUX39 to drive OUTPUT3 of OUTPUT-XBAR
0: Respective output of MUX39 is disabled to drive the OUTPUT3 of OUTPUT-XBAR
1: Respective output of MUX39 is enabled to drive the OUTPUT3 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

6MUX38R/W0hSelects the output of MUX38 to drive OUTPUT3 of OUTPUT-XBAR
0: Respective output of MUX38 is disabled to drive the OUTPUT3 of OUTPUT-XBAR
1: Respective output of MUX38 is enabled to drive the OUTPUT3 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5MUX37R/W0hSelects the output of MUX37 to drive OUTPUT3 of OUTPUT-XBAR
0: Respective output of MUX37 is disabled to drive the OUTPUT3 of OUTPUT-XBAR
1: Respective output of MUX37 is enabled to drive the OUTPUT3 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

4MUX36R/W0hSelects the output of MUX36 to drive OUTPUT3 of OUTPUT-XBAR
0: Respective output of MUX36 is disabled to drive the OUTPUT3 of OUTPUT-XBAR
1: Respective output of MUX36 is enabled to drive the OUTPUT3 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3MUX35R/W0hSelects the output of MUX35 to drive OUTPUT3 of OUTPUT-XBAR
0: Respective output of MUX35 is disabled to drive the OUTPUT3 of OUTPUT-XBAR
1: Respective output of MUX35 is enabled to drive the OUTPUT3 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

2MUX34R/W0hSelects the output of MUX34 to drive OUTPUT3 of OUTPUT-XBAR
0: Respective output of MUX34 is disabled to drive the OUTPUT3 of OUTPUT-XBAR
1: Respective output of MUX34 is enabled to drive the OUTPUT3 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1MUX33R/W0hSelects the output of MUX33 to drive OUTPUT3 of OUTPUT-XBAR
0: Respective output of MUX33 is disabled to drive the OUTPUT3 of OUTPUT-XBAR
1: Respective output of MUX33 is enabled to drive the OUTPUT3 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

0MUX32R/W0hSelects the output of MUX32 to drive OUTPUT3 of OUTPUT-XBAR
0: Respective output of MUX32 is disabled to drive the OUTPUT3 of OUTPUT-XBAR
1: Respective output of MUX32 is enabled to drive the OUTPUT3 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16.3.8.39 OUTPUT4MUXENABLE Register (Offset = 4Ch) [Reset = 00000000h]

OUTPUT4MUXENABLE is shown in Figure 16-205 and described in Table 16-221.

Return to the Summary Table.

Output X-BAR Mux Enable for Output 4

Figure 16-205 OUTPUT4MUXENABLE Register
3130292827262524
MUX31MUX30MUX29MUX28MUX27MUX26MUX25MUX24
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
2322212019181716
MUX23MUX22MUX21MUX20MUX19MUX18MUX17MUX16
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
15141312111098
MUX15MUX14MUX13MUX12MUX11MUX10MUX9MUX8
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
76543210
MUX7MUX6MUX5MUX4MUX3MUX2MUX1MUX0
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 16-221 OUTPUT4MUXENABLE Register Field Descriptions
BitFieldTypeResetDescription
31MUX31R/W0hSelects the output of Mux31 to drive OUTPUT4 of OUTPUT-XBAR

0: Respective output of Mux31 is disabled to drive the OUTPUT4 of OUTPUT-XBAR
1: Respective output of Mux31 is enabled to drive the OUTPUT4 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

30MUX30R/W0hSelects the output of Mux30 to drive OUTPUT4 of OUTPUT-XBAR

0: Respective output of Mux30 is disabled to drive the OUTPUT4 of OUTPUT-XBAR
1: Respective output of Mux30 is enabled to drive the OUTPUT4 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29MUX29R/W0hSelects the output of Mux29 to drive OUTPUT4 of OUTPUT-XBAR

0: Respective output of Mux29 is disabled to drive the OUTPUT4 of OUTPUT-XBAR
1: Respective output of Mux29 is enabled to drive the OUTPUT4 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

28MUX28R/W0hSelects the output of Mux28 to drive OUTPUT4 of OUTPUT-XBAR

0: Respective output of Mux28 is disabled to drive the OUTPUT4 of OUTPUT-XBAR
1: Respective output of Mux28 is enabled to drive the OUTPUT4 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27MUX27R/W0hSelects the output of Mux27 to drive OUTPUT4 of OUTPUT-XBAR

0: Respective output of Mux27 is disabled to drive the OUTPUT4 of OUTPUT-XBAR
1: Respective output of Mux27 is enabled to drive the OUTPUT4 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

26MUX26R/W0hSelects the output of Mux26 to drive OUTPUT4 of OUTPUT-XBAR

0: Respective output of Mux26 is disabled to drive the OUTPUT4 of OUTPUT-XBAR
1: Respective output of Mux26 is enabled to drive the OUTPUT4 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25MUX25R/W0hSelects the output of Mux25 to drive OUTPUT4 of OUTPUT-XBAR

0: Respective output of Mux25 is disabled to drive the OUTPUT4 of OUTPUT-XBAR
1: Respective output of Mux25 is enabled to drive the OUTPUT4 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

24MUX24R/W0hSelects the output of Mux24 to drive OUTPUT4 of OUTPUT-XBAR

0: Respective output of Mux24 is disabled to drive the OUTPUT4 of OUTPUT-XBAR
1: Respective output of Mux24 is enabled to drive the OUTPUT4 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23MUX23R/W0hSelects the output of Mux23 to drive OUTPUT4 of OUTPUT-XBAR

0: Respective output of Mux23 is disabled to drive the OUTPUT4 of OUTPUT-XBAR
1: Respective output of Mux23 is enabled to drive the OUTPUT4 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

22MUX22R/W0hSelects the output of Mux22 to drive OUTPUT4 of OUTPUT-XBAR

0: Respective output of Mux22 is disabled to drive the OUTPUT4 of OUTPUT-XBAR
1: Respective output of Mux22 is enabled to drive the OUTPUT4 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21MUX21R/W0hSelects the output of Mux21 to drive OUTPUT4 of OUTPUT-XBAR

0: Respective output of Mux21 is disabled to drive the OUTPUT4 of OUTPUT-XBAR
1: Respective output of Mux21 is enabled to drive the OUTPUT4 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

20MUX20R/W0hSelects the output of Mux20 to drive OUTPUT4 of OUTPUT-XBAR

0: Respective output of Mux20 is disabled to drive the OUTPUT4 of OUTPUT-XBAR
1: Respective output of Mux20 is enabled to drive the OUTPUT4 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19MUX19R/W0hSelects the output of Mux19 to drive OUTPUT4 of OUTPUT-XBAR

0: Respective output of Mux19 is disabled to drive the OUTPUT4 of OUTPUT-XBAR
1: Respective output of Mux19 is enabled to drive the OUTPUT4 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

18MUX18R/W0hSelects the output of Mux18 to drive OUTPUT4 of OUTPUT-XBAR

0: Respective output of Mux18 is disabled to drive the OUTPUT4 of OUTPUT-XBAR
1: Respective output of Mux18 is enabled to drive the OUTPUT4 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17MUX17R/W0hSelects the output of Mux17 to drive OUTPUT4 of OUTPUT-XBAR

0: Respective output of Mux17 is disabled to drive the OUTPUT4 of OUTPUT-XBAR
1: Respective output of Mux17 is enabled to drive the OUTPUT4 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16MUX16R/W0hSelects the output of Mux16 to drive OUTPUT4 of OUTPUT-XBAR

0: Respective output of Mux16 is disabled to drive the OUTPUT4 of OUTPUT-XBAR
1: Respective output of Mux16 is enabled to drive the OUTPUT4 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15MUX15R/W0hSelects the output of Mux15 to drive OUTPUT4 of OUTPUT-XBAR

0: Respective output of Mux15 is disabled to drive the OUTPUT4 of OUTPUT-XBAR
1: Respective output of Mux15 is enabled to drive the OUTPUT4 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

14MUX14R/W0hSelects the output of Mux14 to drive OUTPUT4 of OUTPUT-XBAR

0: Respective output of Mux14 is disabled to drive the OUTPUT4 of OUTPUT-XBAR
1: Respective output of Mux14 is enabled to drive the OUTPUT4 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13MUX13R/W0hSelects the output of Mux13 to drive OUTPUT4 of OUTPUT-XBAR

0: Respective output of Mux13 is disabled to drive the OUTPUT4 of OUTPUT-XBAR
1: Respective output of Mux13 is enabled to drive the OUTPUT4 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

12MUX12R/W0hSelects the output of Mux12 to drive OUTPUT4 of OUTPUT-XBAR

0: Respective output of Mux12 is disabled to drive the OUTPUT4 of OUTPUT-XBAR
1: Respective output of Mux12 is enabled to drive the OUTPUT4 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11MUX11R/W0hSelects the output of Mux11 to drive OUTPUT4 of OUTPUT-XBAR

0: Respective output of Mux11 is disabled to drive the OUTPUT4 of OUTPUT-XBAR
1: Respective output of Mux11 is enabled to drive the OUTPUT4 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

10MUX10R/W0hSelects the output of Mux10 to drive OUTPUT4 of OUTPUT-XBAR

0: Respective output of Mux10 is disabled to drive the OUTPUT4 of OUTPUT-XBAR
1: Respective output of Mux10 is enabled to drive the OUTPUT4 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9MUX9R/W0hSelects the output of Mux9 to drive OUTPUT4 of OUTPUT-XBAR

0: Respective output of Mux9 is disabled to drive the OUTPUT4 of OUTPUT-XBAR
1: Respective output of Mux9 is enabled to drive the OUTPUT4 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

8MUX8R/W0hSelects the output of Mux8 to drive OUTPUT4 of OUTPUT-XBAR

0: Respective output of Mux8 is disabled to drive the OUTPUT4 of OUTPUT-XBAR
1: Respective output of Mux8 is enabled to drive the OUTPUT4 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7MUX7R/W0hSelects the output of Mux7 to drive OUTPUT4 of OUTPUT-XBAR

0: Respective output of Mux7 is disabled to drive the OUTPUT4 of OUTPUT-XBAR
1: Respective output of Mux7 is enabled to drive the OUTPUT4 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

6MUX6R/W0hSelects the output of Mux6 to drive OUTPUT4 of OUTPUT-XBAR

0: Respective output of Mux6 is disabled to drive the OUTPUT4 of OUTPUT-XBAR
1: Respective output of Mux6 is enabled to drive the OUTPUT4 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5MUX5R/W0hSelects the output of Mux5 to drive OUTPUT4 of OUTPUT-XBAR

0: Respective output of Mux5 is disabled to drive the OUTPUT4 of OUTPUT-XBAR
1: Respective output of Mux5 is enabled to drive the OUTPUT4 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

4MUX4R/W0hSelects the output of Mux4 to drive OUTPUT4 of OUTPUT-XBAR

0: Respective output of Mux4 is disabled to drive the OUTPUT4 of OUTPUT-XBAR
1: Respective output of Mux4 is enabled to drive the OUTPUT4 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3MUX3R/W0hSelects the output of Mux3 to drive OUTPUT4 of OUTPUT-XBAR

0: Respective output of Mux3 is disabled to drive the OUTPUT4 of OUTPUT-XBAR
1: Respective output of Mux3 is enabled to drive the OUTPUT4 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

2MUX2R/W0hSelects the output of Mux2 to drive OUTPUT4 of OUTPUT-XBAR

0: Respective output of Mux2 is disabled to drive the OUTPUT4 of OUTPUT-XBAR
1: Respective output of Mux2 is enabled to drive the OUTPUT4 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1MUX1R/W0hSelects the output of Mux1 to drive OUTPUT4 of OUTPUT-XBAR

0: Respective output of Mux1 is disabled to drive the OUTPUT4 of OUTPUT-XBAR
1: Respective output of Mux1 is enabled to drive the OUTPUT4 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

0MUX0R/W0hSelects the output of mux0 to drive OUTPUT4 of OUTPUT-XBAR

0: Respective output of Mux0 is disabled to drive the OUTPUT4 of OUTPUT-XBAR
1: Respective output of Mux0 is enabled to drive the OUTPUT4 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16.3.8.40 OUTPUT4MUXENABLE32TO63 Register (Offset = 4Eh) [Reset = 00000000h]

OUTPUT4MUXENABLE32TO63 is shown in Figure 16-206 and described in Table 16-222.

Return to the Summary Table.

Output X-BAR Mux Enable for Output 4

Figure 16-206 OUTPUT4MUXENABLE32TO63 Register
3130292827262524
MUX63MUX62MUX61MUX60MUX59MUX58MUX57MUX56
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
2322212019181716
MUX55MUX54MUX53MUX52MUX51MUX50MUX49MUX48
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
15141312111098
MUX47MUX46MUX45MUX44MUX43MUX42MUX41MUX40
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
76543210
MUX39MUX38MUX37MUX36MUX35MUX34MUX33MUX32
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 16-222 OUTPUT4MUXENABLE32TO63 Register Field Descriptions
BitFieldTypeResetDescription
31MUX63R/W0hSelects the output of MUX63 to drive OUTPUT4 of OUTPUT-XBAR
0: Respective output of MUX63 is disabled to drive the OUTPUT4 of OUTPUT-XBAR
1: Respective output of MUX63 is enabled to drive the OUTPUT4 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

30MUX62R/W0hSelects the output of MUX62 to drive OUTPUT4 of OUTPUT-XBAR
0: Respective output of MUX62 is disabled to drive the OUTPUT4 of OUTPUT-XBAR
1: Respective output of MUX62 is enabled to drive the OUTPUT4 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29MUX61R/W0hSelects the output of MUX61 to drive OUTPUT4 of OUTPUT-XBAR
0: Respective output of MUX61 is disabled to drive the OUTPUT4 of OUTPUT-XBAR
1: Respective output of MUX61 is enabled to drive the OUTPUT4 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

28MUX60R/W0hSelects the output of MUX60 to drive OUTPUT4 of OUTPUT-XBAR
0: Respective output of MUX60 is disabled to drive the OUTPUT4 of OUTPUT-XBAR
1: Respective output of MUX60 is enabled to drive the OUTPUT4 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27MUX59R/W0hSelects the output of MUX59 to drive OUTPUT4 of OUTPUT-XBAR
0: Respective output of MUX59 is disabled to drive the OUTPUT4 of OUTPUT-XBAR
1: Respective output of MUX59 is enabled to drive the OUTPUT4 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

26MUX58R/W0hSelects the output of MUX58 to drive OUTPUT4 of OUTPUT-XBAR
0: Respective output of MUX58 is disabled to drive the OUTPUT4 of OUTPUT-XBAR
1: Respective output of MUX58 is enabled to drive the OUTPUT4 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25MUX57R/W0hSelects the output of MUX57 to drive OUTPUT4 of OUTPUT-XBAR
0: Respective output of MUX57 is disabled to drive the OUTPUT4 of OUTPUT-XBAR
1: Respective output of MUX57 is enabled to drive the OUTPUT4 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

24MUX56R/W0hSelects the output of MUX56 to drive OUTPUT4 of OUTPUT-XBAR
0: Respective output of MUX56 is disabled to drive the OUTPUT4 of OUTPUT-XBAR
1: Respective output of MUX56 is enabled to drive the OUTPUT4 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23MUX55R/W0hSelects the output of MUX55 to drive OUTPUT4 of OUTPUT-XBAR
0: Respective output of MUX55 is disabled to drive the OUTPUT4 of OUTPUT-XBAR
1: Respective output of MUX55 is enabled to drive the OUTPUT4 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

22MUX54R/W0hSelects the output of MUX54 to drive OUTPUT4 of OUTPUT-XBAR
0: Respective output of MUX54 is disabled to drive the OUTPUT4 of OUTPUT-XBAR
1: Respective output of MUX54 is enabled to drive the OUTPUT4 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21MUX53R/W0hSelects the output of MUX53 to drive OUTPUT4 of OUTPUT-XBAR
0: Respective output of MUX53 is disabled to drive the OUTPUT4 of OUTPUT-XBAR
1: Respective output of MUX53 is enabled to drive the OUTPUT4 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

20MUX52R/W0hSelects the output of MUX52 to drive OUTPUT4 of OUTPUT-XBAR
0: Respective output of MUX52 is disabled to drive the OUTPUT4 of OUTPUT-XBAR
1: Respective output of MUX52 is enabled to drive the OUTPUT4 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19MUX51R/W0hSelects the output of MUX51 to drive OUTPUT4 of OUTPUT-XBAR
0: Respective output of MUX51 is disabled to drive the OUTPUT4 of OUTPUT-XBAR
1: Respective output of MUX51 is enabled to drive the OUTPUT4 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

18MUX50R/W0hSelects the output of MUX50 to drive OUTPUT4 of OUTPUT-XBAR
0: Respective output of MUX50 is disabled to drive the OUTPUT4 of OUTPUT-XBAR
1: Respective output of MUX50 is enabled to drive the OUTPUT4 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17MUX49R/W0hSelects the output of MUX49 to drive OUTPUT4 of OUTPUT-XBAR
0: Respective output of MUX49 is disabled to drive the OUTPUT4 of OUTPUT-XBAR
1: Respective output of MUX49 is enabled to drive the OUTPUT4 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16MUX48R/W0hSelects the output of MUX48 to drive OUTPUT4 of OUTPUT-XBAR
0: Respective output of MUX48 is disabled to drive the OUTPUT4 of OUTPUT-XBAR
1: Respective output of MUX48 is enabled to drive the OUTPUT4 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15MUX47R/W0hSelects the output of MUX47 to drive OUTPUT4 of OUTPUT-XBAR
0: Respective output of MUX47 is disabled to drive the OUTPUT4 of OUTPUT-XBAR
1: Respective output of MUX47 is enabled to drive the OUTPUT4 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

14MUX46R/W0hSelects the output of MUX46 to drive OUTPUT4 of OUTPUT-XBAR
0: Respective output of MUX46 is disabled to drive the OUTPUT4 of OUTPUT-XBAR
1: Respective output of MUX46 is enabled to drive the OUTPUT4 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13MUX45R/W0hSelects the output of MUX45 to drive OUTPUT4 of OUTPUT-XBAR
0: Respective output of MUX45 is disabled to drive the OUTPUT4 of OUTPUT-XBAR
1: Respective output of MUX45 is enabled to drive the OUTPUT4 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

12MUX44R/W0hSelects the output of MUX44 to drive OUTPUT4 of OUTPUT-XBAR
0: Respective output of MUX44 is disabled to drive the OUTPUT4 of OUTPUT-XBAR
1: Respective output of MUX44 is enabled to drive the OUTPUT4 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11MUX43R/W0hSelects the output of MUX43 to drive OUTPUT4 of OUTPUT-XBAR
0: Respective output of MUX43 is disabled to drive the OUTPUT4 of OUTPUT-XBAR
1: Respective output of MUX43 is enabled to drive the OUTPUT4 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

10MUX42R/W0hSelects the output of MUX42 to drive OUTPUT4 of OUTPUT-XBAR
0: Respective output of MUX42 is disabled to drive the OUTPUT4 of OUTPUT-XBAR
1: Respective output of MUX42 is enabled to drive the OUTPUT4 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9MUX41R/W0hSelects the output of MUX41 to drive OUTPUT4 of OUTPUT-XBAR
0: Respective output of MUX41 is disabled to drive the OUTPUT4 of OUTPUT-XBAR
1: Respective output of MUX41 is enabled to drive the OUTPUT4 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

8MUX40R/W0hSelects the output of MUX40 to drive OUTPUT4 of OUTPUT-XBAR
0: Respective output of MUX40 is disabled to drive the OUTPUT4 of OUTPUT-XBAR
1: Respective output of MUX40 is enabled to drive the OUTPUT4 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7MUX39R/W0hSelects the output of MUX39 to drive OUTPUT4 of OUTPUT-XBAR
0: Respective output of MUX39 is disabled to drive the OUTPUT4 of OUTPUT-XBAR
1: Respective output of MUX39 is enabled to drive the OUTPUT4 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

6MUX38R/W0hSelects the output of MUX38 to drive OUTPUT4 of OUTPUT-XBAR
0: Respective output of MUX38 is disabled to drive the OUTPUT4 of OUTPUT-XBAR
1: Respective output of MUX38 is enabled to drive the OUTPUT4 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5MUX37R/W0hSelects the output of MUX37 to drive OUTPUT4 of OUTPUT-XBAR
0: Respective output of MUX37 is disabled to drive the OUTPUT4 of OUTPUT-XBAR
1: Respective output of MUX37 is enabled to drive the OUTPUT4 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

4MUX36R/W0hSelects the output of MUX36 to drive OUTPUT4 of OUTPUT-XBAR
0: Respective output of MUX36 is disabled to drive the OUTPUT4 of OUTPUT-XBAR
1: Respective output of MUX36 is enabled to drive the OUTPUT4 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3MUX35R/W0hSelects the output of MUX35 to drive OUTPUT4 of OUTPUT-XBAR
0: Respective output of MUX35 is disabled to drive the OUTPUT4 of OUTPUT-XBAR
1: Respective output of MUX35 is enabled to drive the OUTPUT4 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

2MUX34R/W0hSelects the output of MUX34 to drive OUTPUT4 of OUTPUT-XBAR
0: Respective output of MUX34 is disabled to drive the OUTPUT4 of OUTPUT-XBAR
1: Respective output of MUX34 is enabled to drive the OUTPUT4 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1MUX33R/W0hSelects the output of MUX33 to drive OUTPUT4 of OUTPUT-XBAR
0: Respective output of MUX33 is disabled to drive the OUTPUT4 of OUTPUT-XBAR
1: Respective output of MUX33 is enabled to drive the OUTPUT4 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

0MUX32R/W0hSelects the output of MUX32 to drive OUTPUT4 of OUTPUT-XBAR
0: Respective output of MUX32 is disabled to drive the OUTPUT4 of OUTPUT-XBAR
1: Respective output of MUX32 is enabled to drive the OUTPUT4 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16.3.8.41 OUTPUT5MUXENABLE Register (Offset = 50h) [Reset = 00000000h]

OUTPUT5MUXENABLE is shown in Figure 16-207 and described in Table 16-223.

Return to the Summary Table.

Output X-BAR Mux Enable for Output 5

Figure 16-207 OUTPUT5MUXENABLE Register
3130292827262524
MUX31MUX30MUX29MUX28MUX27MUX26MUX25MUX24
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
2322212019181716
MUX23MUX22MUX21MUX20MUX19MUX18MUX17MUX16
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
15141312111098
MUX15MUX14MUX13MUX12MUX11MUX10MUX9MUX8
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
76543210
MUX7MUX6MUX5MUX4MUX3MUX2MUX1MUX0
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 16-223 OUTPUT5MUXENABLE Register Field Descriptions
BitFieldTypeResetDescription
31MUX31R/W0hSelects the output of Mux31 to drive OUTPUT5 of OUTPUT-XBAR

0: Respective output of Mux31 is disabled to drive the OUTPUT5 of OUTPUT-XBAR
1: Respective output of Mux31 is enabled to drive the OUTPUT5 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

30MUX30R/W0hSelects the output of Mux30 to drive OUTPUT5 of OUTPUT-XBAR

0: Respective output of Mux30 is disabled to drive the OUTPUT5 of OUTPUT-XBAR
1: Respective output of Mux30 is enabled to drive the OUTPUT5 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29MUX29R/W0hSelects the output of Mux29 to drive OUTPUT5 of OUTPUT-XBAR

0: Respective output of Mux29 is disabled to drive the OUTPUT5 of OUTPUT-XBAR
1: Respective output of Mux29 is enabled to drive the OUTPUT5 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

28MUX28R/W0hSelects the output of Mux28 to drive OUTPUT5 of OUTPUT-XBAR

0: Respective output of Mux28 is disabled to drive the OUTPUT5 of OUTPUT-XBAR
1: Respective output of Mux28 is enabled to drive the OUTPUT5 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27MUX27R/W0hSelects the output of Mux27 to drive OUTPUT5 of OUTPUT-XBAR

0: Respective output of Mux27 is disabled to drive the OUTPUT5 of OUTPUT-XBAR
1: Respective output of Mux27 is enabled to drive the OUTPUT5 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

26MUX26R/W0hSelects the output of Mux26 to drive OUTPUT5 of OUTPUT-XBAR

0: Respective output of Mux26 is disabled to drive the OUTPUT5 of OUTPUT-XBAR
1: Respective output of Mux26 is enabled to drive the OUTPUT5 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25MUX25R/W0hSelects the output of Mux25 to drive OUTPUT5 of OUTPUT-XBAR

0: Respective output of Mux25 is disabled to drive the OUTPUT5 of OUTPUT-XBAR
1: Respective output of Mux25 is enabled to drive the OUTPUT5 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

24MUX24R/W0hSelects the output of Mux24 to drive OUTPUT5 of OUTPUT-XBAR

0: Respective output of Mux24 is disabled to drive the OUTPUT5 of OUTPUT-XBAR
1: Respective output of Mux24 is enabled to drive the OUTPUT5 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23MUX23R/W0hSelects the output of Mux23 to drive OUTPUT5 of OUTPUT-XBAR

0: Respective output of Mux23 is disabled to drive the OUTPUT5 of OUTPUT-XBAR
1: Respective output of Mux23 is enabled to drive the OUTPUT5 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

22MUX22R/W0hSelects the output of Mux22 to drive OUTPUT5 of OUTPUT-XBAR

0: Respective output of Mux22 is disabled to drive the OUTPUT5 of OUTPUT-XBAR
1: Respective output of Mux22 is enabled to drive the OUTPUT5 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21MUX21R/W0hSelects the output of Mux21 to drive OUTPUT5 of OUTPUT-XBAR

0: Respective output of Mux21 is disabled to drive the OUTPUT5 of OUTPUT-XBAR
1: Respective output of Mux21 is enabled to drive the OUTPUT5 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

20MUX20R/W0hSelects the output of Mux20 to drive OUTPUT5 of OUTPUT-XBAR

0: Respective output of Mux20 is disabled to drive the OUTPUT5 of OUTPUT-XBAR
1: Respective output of Mux20 is enabled to drive the OUTPUT5 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19MUX19R/W0hSelects the output of Mux19 to drive OUTPUT5 of OUTPUT-XBAR

0: Respective output of Mux19 is disabled to drive the OUTPUT5 of OUTPUT-XBAR
1: Respective output of Mux19 is enabled to drive the OUTPUT5 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

18MUX18R/W0hSelects the output of Mux18 to drive OUTPUT5 of OUTPUT-XBAR

0: Respective output of Mux18 is disabled to drive the OUTPUT5 of OUTPUT-XBAR
1: Respective output of Mux18 is enabled to drive the OUTPUT5 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17MUX17R/W0hSelects the output of Mux17 to drive OUTPUT5 of OUTPUT-XBAR

0: Respective output of Mux17 is disabled to drive the OUTPUT5 of OUTPUT-XBAR
1: Respective output of Mux17 is enabled to drive the OUTPUT5 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16MUX16R/W0hSelects the output of Mux16 to drive OUTPUT5 of OUTPUT-XBAR

0: Respective output of Mux16 is disabled to drive the OUTPUT5 of OUTPUT-XBAR
1: Respective output of Mux16 is enabled to drive the OUTPUT5 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15MUX15R/W0hSelects the output of Mux15 to drive OUTPUT5 of OUTPUT-XBAR

0: Respective output of Mux15 is disabled to drive the OUTPUT5 of OUTPUT-XBAR
1: Respective output of Mux15 is enabled to drive the OUTPUT5 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

14MUX14R/W0hSelects the output of Mux14 to drive OUTPUT5 of OUTPUT-XBAR

0: Respective output of Mux14 is disabled to drive the OUTPUT5 of OUTPUT-XBAR
1: Respective output of Mux14 is enabled to drive the OUTPUT5 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13MUX13R/W0hSelects the output of Mux13 to drive OUTPUT5 of OUTPUT-XBAR

0: Respective output of Mux13 is disabled to drive the OUTPUT5 of OUTPUT-XBAR
1: Respective output of Mux13 is enabled to drive the OUTPUT5 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

12MUX12R/W0hSelects the output of Mux12 to drive OUTPUT5 of OUTPUT-XBAR

0: Respective output of Mux12 is disabled to drive the OUTPUT5 of OUTPUT-XBAR
1: Respective output of Mux12 is enabled to drive the OUTPUT5 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11MUX11R/W0hSelects the output of Mux11 to drive OUTPUT5 of OUTPUT-XBAR

0: Respective output of Mux11 is disabled to drive the OUTPUT5 of OUTPUT-XBAR
1: Respective output of Mux11 is enabled to drive the OUTPUT5 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

10MUX10R/W0hSelects the output of Mux10 to drive OUTPUT5 of OUTPUT-XBAR

0: Respective output of Mux10 is disabled to drive the OUTPUT5 of OUTPUT-XBAR
1: Respective output of Mux10 is enabled to drive the OUTPUT5 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9MUX9R/W0hSelects the output of Mux9 to drive OUTPUT5 of OUTPUT-XBAR

0: Respective output of Mux9 is disabled to drive the OUTPUT5 of OUTPUT-XBAR
1: Respective output of Mux9 is enabled to drive the OUTPUT5 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

8MUX8R/W0hSelects the output of Mux8 to drive OUTPUT5 of OUTPUT-XBAR

0: Respective output of Mux8 is disabled to drive the OUTPUT5 of OUTPUT-XBAR
1: Respective output of Mux8 is enabled to drive the OUTPUT5 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7MUX7R/W0hSelects the output of Mux7 to drive OUTPUT5 of OUTPUT-XBAR

0: Respective output of Mux7 is disabled to drive the OUTPUT5 of OUTPUT-XBAR
1: Respective output of Mux7 is enabled to drive the OUTPUT5 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

6MUX6R/W0hSelects the output of Mux6 to drive OUTPUT5 of OUTPUT-XBAR

0: Respective output of Mux6 is disabled to drive the OUTPUT5 of OUTPUT-XBAR
1: Respective output of Mux6 is enabled to drive the OUTPUT5 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5MUX5R/W0hSelects the output of Mux5 to drive OUTPUT5 of OUTPUT-XBAR

0: Respective output of Mux5 is disabled to drive the OUTPUT5 of OUTPUT-XBAR
1: Respective output of Mux5 is enabled to drive the OUTPUT5 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

4MUX4R/W0hSelects the output of Mux4 to drive OUTPUT5 of OUTPUT-XBAR

0: Respective output of Mux4 is disabled to drive the OUTPUT5 of OUTPUT-XBAR
1: Respective output of Mux4 is enabled to drive the OUTPUT5 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3MUX3R/W0hSelects the output of Mux3 to drive OUTPUT5 of OUTPUT-XBAR

0: Respective output of Mux3 is disabled to drive the OUTPUT5 of OUTPUT-XBAR
1: Respective output of Mux3 is enabled to drive the OUTPUT5 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

2MUX2R/W0hSelects the output of Mux2 to drive OUTPUT5 of OUTPUT-XBAR

0: Respective output of Mux2 is disabled to drive the OUTPUT5 of OUTPUT-XBAR
1: Respective output of Mux2 is enabled to drive the OUTPUT5 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1MUX1R/W0hSelects the output of Mux1 to drive OUTPUT5 of OUTPUT-XBAR

0: Respective output of Mux1 is disabled to drive the OUTPUT5 of OUTPUT-XBAR
1: Respective output of Mux1 is enabled to drive the OUTPUT5 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

0MUX0R/W0hSelects the output of mux0 to drive OUTPUT5 of OUTPUT-XBAR

0: Respective output of Mux0 is disabled to drive the OUTPUT5 of OUTPUT-XBAR
1: Respective output of Mux0 is enabled to drive the OUTPUT5 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16.3.8.42 OUTPUT5MUXENABLE32TO63 Register (Offset = 52h) [Reset = 00000000h]

OUTPUT5MUXENABLE32TO63 is shown in Figure 16-208 and described in Table 16-224.

Return to the Summary Table.

Output X-BAR Mux Enable for Output 5

Figure 16-208 OUTPUT5MUXENABLE32TO63 Register
3130292827262524
MUX63MUX62MUX61MUX60MUX59MUX58MUX57MUX56
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
2322212019181716
MUX55MUX54MUX53MUX52MUX51MUX50MUX49MUX48
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
15141312111098
MUX47MUX46MUX45MUX44MUX43MUX42MUX41MUX40
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
76543210
MUX39MUX38MUX37MUX36MUX35MUX34MUX33MUX32
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 16-224 OUTPUT5MUXENABLE32TO63 Register Field Descriptions
BitFieldTypeResetDescription
31MUX63R/W0hSelects the output of MUX63 to drive OUTPUT5 of OUTPUT-XBAR
0: Respective output of MUX63 is disabled to drive the OUTPUT5 of OUTPUT-XBAR
1: Respective output of MUX63 is enabled to drive the OUTPUT5 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

30MUX62R/W0hSelects the output of MUX62 to drive OUTPUT5 of OUTPUT-XBAR
0: Respective output of MUX62 is disabled to drive the OUTPUT5 of OUTPUT-XBAR
1: Respective output of MUX62 is enabled to drive the OUTPUT5 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29MUX61R/W0hSelects the output of MUX61 to drive OUTPUT5 of OUTPUT-XBAR
0: Respective output of MUX61 is disabled to drive the OUTPUT5 of OUTPUT-XBAR
1: Respective output of MUX61 is enabled to drive the OUTPUT5 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

28MUX60R/W0hSelects the output of MUX60 to drive OUTPUT5 of OUTPUT-XBAR
0: Respective output of MUX60 is disabled to drive the OUTPUT5 of OUTPUT-XBAR
1: Respective output of MUX60 is enabled to drive the OUTPUT5 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27MUX59R/W0hSelects the output of MUX59 to drive OUTPUT5 of OUTPUT-XBAR
0: Respective output of MUX59 is disabled to drive the OUTPUT5 of OUTPUT-XBAR
1: Respective output of MUX59 is enabled to drive the OUTPUT5 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

26MUX58R/W0hSelects the output of MUX58 to drive OUTPUT5 of OUTPUT-XBAR
0: Respective output of MUX58 is disabled to drive the OUTPUT5 of OUTPUT-XBAR
1: Respective output of MUX58 is enabled to drive the OUTPUT5 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25MUX57R/W0hSelects the output of MUX57 to drive OUTPUT5 of OUTPUT-XBAR
0: Respective output of MUX57 is disabled to drive the OUTPUT5 of OUTPUT-XBAR
1: Respective output of MUX57 is enabled to drive the OUTPUT5 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

24MUX56R/W0hSelects the output of MUX56 to drive OUTPUT5 of OUTPUT-XBAR
0: Respective output of MUX56 is disabled to drive the OUTPUT5 of OUTPUT-XBAR
1: Respective output of MUX56 is enabled to drive the OUTPUT5 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23MUX55R/W0hSelects the output of MUX55 to drive OUTPUT5 of OUTPUT-XBAR
0: Respective output of MUX55 is disabled to drive the OUTPUT5 of OUTPUT-XBAR
1: Respective output of MUX55 is enabled to drive the OUTPUT5 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

22MUX54R/W0hSelects the output of MUX54 to drive OUTPUT5 of OUTPUT-XBAR
0: Respective output of MUX54 is disabled to drive the OUTPUT5 of OUTPUT-XBAR
1: Respective output of MUX54 is enabled to drive the OUTPUT5 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21MUX53R/W0hSelects the output of MUX53 to drive OUTPUT5 of OUTPUT-XBAR
0: Respective output of MUX53 is disabled to drive the OUTPUT5 of OUTPUT-XBAR
1: Respective output of MUX53 is enabled to drive the OUTPUT5 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

20MUX52R/W0hSelects the output of MUX52 to drive OUTPUT5 of OUTPUT-XBAR
0: Respective output of MUX52 is disabled to drive the OUTPUT5 of OUTPUT-XBAR
1: Respective output of MUX52 is enabled to drive the OUTPUT5 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19MUX51R/W0hSelects the output of MUX51 to drive OUTPUT5 of OUTPUT-XBAR
0: Respective output of MUX51 is disabled to drive the OUTPUT5 of OUTPUT-XBAR
1: Respective output of MUX51 is enabled to drive the OUTPUT5 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

18MUX50R/W0hSelects the output of MUX50 to drive OUTPUT5 of OUTPUT-XBAR
0: Respective output of MUX50 is disabled to drive the OUTPUT5 of OUTPUT-XBAR
1: Respective output of MUX50 is enabled to drive the OUTPUT5 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17MUX49R/W0hSelects the output of MUX49 to drive OUTPUT5 of OUTPUT-XBAR
0: Respective output of MUX49 is disabled to drive the OUTPUT5 of OUTPUT-XBAR
1: Respective output of MUX49 is enabled to drive the OUTPUT5 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16MUX48R/W0hSelects the output of MUX48 to drive OUTPUT5 of OUTPUT-XBAR
0: Respective output of MUX48 is disabled to drive the OUTPUT5 of OUTPUT-XBAR
1: Respective output of MUX48 is enabled to drive the OUTPUT5 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15MUX47R/W0hSelects the output of MUX47 to drive OUTPUT5 of OUTPUT-XBAR
0: Respective output of MUX47 is disabled to drive the OUTPUT5 of OUTPUT-XBAR
1: Respective output of MUX47 is enabled to drive the OUTPUT5 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

14MUX46R/W0hSelects the output of MUX46 to drive OUTPUT5 of OUTPUT-XBAR
0: Respective output of MUX46 is disabled to drive the OUTPUT5 of OUTPUT-XBAR
1: Respective output of MUX46 is enabled to drive the OUTPUT5 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13MUX45R/W0hSelects the output of MUX45 to drive OUTPUT5 of OUTPUT-XBAR
0: Respective output of MUX45 is disabled to drive the OUTPUT5 of OUTPUT-XBAR
1: Respective output of MUX45 is enabled to drive the OUTPUT5 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

12MUX44R/W0hSelects the output of MUX44 to drive OUTPUT5 of OUTPUT-XBAR
0: Respective output of MUX44 is disabled to drive the OUTPUT5 of OUTPUT-XBAR
1: Respective output of MUX44 is enabled to drive the OUTPUT5 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11MUX43R/W0hSelects the output of MUX43 to drive OUTPUT5 of OUTPUT-XBAR
0: Respective output of MUX43 is disabled to drive the OUTPUT5 of OUTPUT-XBAR
1: Respective output of MUX43 is enabled to drive the OUTPUT5 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

10MUX42R/W0hSelects the output of MUX42 to drive OUTPUT5 of OUTPUT-XBAR
0: Respective output of MUX42 is disabled to drive the OUTPUT5 of OUTPUT-XBAR
1: Respective output of MUX42 is enabled to drive the OUTPUT5 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9MUX41R/W0hSelects the output of MUX41 to drive OUTPUT5 of OUTPUT-XBAR
0: Respective output of MUX41 is disabled to drive the OUTPUT5 of OUTPUT-XBAR
1: Respective output of MUX41 is enabled to drive the OUTPUT5 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

8MUX40R/W0hSelects the output of MUX40 to drive OUTPUT5 of OUTPUT-XBAR
0: Respective output of MUX40 is disabled to drive the OUTPUT5 of OUTPUT-XBAR
1: Respective output of MUX40 is enabled to drive the OUTPUT5 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7MUX39R/W0hSelects the output of MUX39 to drive OUTPUT5 of OUTPUT-XBAR
0: Respective output of MUX39 is disabled to drive the OUTPUT5 of OUTPUT-XBAR
1: Respective output of MUX39 is enabled to drive the OUTPUT5 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

6MUX38R/W0hSelects the output of MUX38 to drive OUTPUT5 of OUTPUT-XBAR
0: Respective output of MUX38 is disabled to drive the OUTPUT5 of OUTPUT-XBAR
1: Respective output of MUX38 is enabled to drive the OUTPUT5 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5MUX37R/W0hSelects the output of MUX37 to drive OUTPUT5 of OUTPUT-XBAR
0: Respective output of MUX37 is disabled to drive the OUTPUT5 of OUTPUT-XBAR
1: Respective output of MUX37 is enabled to drive the OUTPUT5 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

4MUX36R/W0hSelects the output of MUX36 to drive OUTPUT5 of OUTPUT-XBAR
0: Respective output of MUX36 is disabled to drive the OUTPUT5 of OUTPUT-XBAR
1: Respective output of MUX36 is enabled to drive the OUTPUT5 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3MUX35R/W0hSelects the output of MUX35 to drive OUTPUT5 of OUTPUT-XBAR
0: Respective output of MUX35 is disabled to drive the OUTPUT5 of OUTPUT-XBAR
1: Respective output of MUX35 is enabled to drive the OUTPUT5 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

2MUX34R/W0hSelects the output of MUX34 to drive OUTPUT5 of OUTPUT-XBAR
0: Respective output of MUX34 is disabled to drive the OUTPUT5 of OUTPUT-XBAR
1: Respective output of MUX34 is enabled to drive the OUTPUT5 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1MUX33R/W0hSelects the output of MUX33 to drive OUTPUT5 of OUTPUT-XBAR
0: Respective output of MUX33 is disabled to drive the OUTPUT5 of OUTPUT-XBAR
1: Respective output of MUX33 is enabled to drive the OUTPUT5 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

0MUX32R/W0hSelects the output of MUX32 to drive OUTPUT5 of OUTPUT-XBAR
0: Respective output of MUX32 is disabled to drive the OUTPUT5 of OUTPUT-XBAR
1: Respective output of MUX32 is enabled to drive the OUTPUT5 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16.3.8.43 OUTPUT6MUXENABLE Register (Offset = 54h) [Reset = 00000000h]

OUTPUT6MUXENABLE is shown in Figure 16-209 and described in Table 16-225.

Return to the Summary Table.

Output X-BAR Mux Enable for Output 6

Figure 16-209 OUTPUT6MUXENABLE Register
3130292827262524
MUX31MUX30MUX29MUX28MUX27MUX26MUX25MUX24
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
2322212019181716
MUX23MUX22MUX21MUX20MUX19MUX18MUX17MUX16
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
15141312111098
MUX15MUX14MUX13MUX12MUX11MUX10MUX9MUX8
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
76543210
MUX7MUX6MUX5MUX4MUX3MUX2MUX1MUX0
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 16-225 OUTPUT6MUXENABLE Register Field Descriptions
BitFieldTypeResetDescription
31MUX31R/W0hSelects the output of Mux31 to drive OUTPUT6 of OUTPUT-XBAR

0: Respective output of Mux31 is disabled to drive the OUTPUT6 of OUTPUT-XBAR
1: Respective output of Mux31 is enabled to drive the OUTPUT6 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

30MUX30R/W0hSelects the output of Mux30 to drive OUTPUT6 of OUTPUT-XBAR

0: Respective output of Mux30 is disabled to drive the OUTPUT6 of OUTPUT-XBAR
1: Respective output of Mux30 is enabled to drive the OUTPUT6 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29MUX29R/W0hSelects the output of Mux29 to drive OUTPUT6 of OUTPUT-XBAR

0: Respective output of Mux29 is disabled to drive the OUTPUT6 of OUTPUT-XBAR
1: Respective output of Mux29 is enabled to drive the OUTPUT6 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

28MUX28R/W0hSelects the output of Mux28 to drive OUTPUT6 of OUTPUT-XBAR

0: Respective output of Mux28 is disabled to drive the OUTPUT6 of OUTPUT-XBAR
1: Respective output of Mux28 is enabled to drive the OUTPUT6 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27MUX27R/W0hSelects the output of Mux27 to drive OUTPUT6 of OUTPUT-XBAR

0: Respective output of Mux27 is disabled to drive the OUTPUT6 of OUTPUT-XBAR
1: Respective output of Mux27 is enabled to drive the OUTPUT6 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

26MUX26R/W0hSelects the output of Mux26 to drive OUTPUT6 of OUTPUT-XBAR

0: Respective output of Mux26 is disabled to drive the OUTPUT6 of OUTPUT-XBAR
1: Respective output of Mux26 is enabled to drive the OUTPUT6 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25MUX25R/W0hSelects the output of Mux25 to drive OUTPUT6 of OUTPUT-XBAR

0: Respective output of Mux25 is disabled to drive the OUTPUT6 of OUTPUT-XBAR
1: Respective output of Mux25 is enabled to drive the OUTPUT6 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

24MUX24R/W0hSelects the output of Mux24 to drive OUTPUT6 of OUTPUT-XBAR

0: Respective output of Mux24 is disabled to drive the OUTPUT6 of OUTPUT-XBAR
1: Respective output of Mux24 is enabled to drive the OUTPUT6 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23MUX23R/W0hSelects the output of Mux23 to drive OUTPUT6 of OUTPUT-XBAR

0: Respective output of Mux23 is disabled to drive the OUTPUT6 of OUTPUT-XBAR
1: Respective output of Mux23 is enabled to drive the OUTPUT6 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

22MUX22R/W0hSelects the output of Mux22 to drive OUTPUT6 of OUTPUT-XBAR

0: Respective output of Mux22 is disabled to drive the OUTPUT6 of OUTPUT-XBAR
1: Respective output of Mux22 is enabled to drive the OUTPUT6 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21MUX21R/W0hSelects the output of Mux21 to drive OUTPUT6 of OUTPUT-XBAR

0: Respective output of Mux21 is disabled to drive the OUTPUT6 of OUTPUT-XBAR
1: Respective output of Mux21 is enabled to drive the OUTPUT6 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

20MUX20R/W0hSelects the output of Mux20 to drive OUTPUT6 of OUTPUT-XBAR

0: Respective output of Mux20 is disabled to drive the OUTPUT6 of OUTPUT-XBAR
1: Respective output of Mux20 is enabled to drive the OUTPUT6 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19MUX19R/W0hSelects the output of Mux19 to drive OUTPUT6 of OUTPUT-XBAR

0: Respective output of Mux19 is disabled to drive the OUTPUT6 of OUTPUT-XBAR
1: Respective output of Mux19 is enabled to drive the OUTPUT6 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

18MUX18R/W0hSelects the output of Mux18 to drive OUTPUT6 of OUTPUT-XBAR

0: Respective output of Mux18 is disabled to drive the OUTPUT6 of OUTPUT-XBAR
1: Respective output of Mux18 is enabled to drive the OUTPUT6 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17MUX17R/W0hSelects the output of Mux17 to drive OUTPUT6 of OUTPUT-XBAR

0: Respective output of Mux17 is disabled to drive the OUTPUT6 of OUTPUT-XBAR
1: Respective output of Mux17 is enabled to drive the OUTPUT6 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16MUX16R/W0hSelects the output of Mux16 to drive OUTPUT6 of OUTPUT-XBAR

0: Respective output of Mux16 is disabled to drive the OUTPUT6 of OUTPUT-XBAR
1: Respective output of Mux16 is enabled to drive the OUTPUT6 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15MUX15R/W0hSelects the output of Mux15 to drive OUTPUT6 of OUTPUT-XBAR

0: Respective output of Mux15 is disabled to drive the OUTPUT6 of OUTPUT-XBAR
1: Respective output of Mux15 is enabled to drive the OUTPUT6 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

14MUX14R/W0hSelects the output of Mux14 to drive OUTPUT6 of OUTPUT-XBAR

0: Respective output of Mux14 is disabled to drive the OUTPUT6 of OUTPUT-XBAR
1: Respective output of Mux14 is enabled to drive the OUTPUT6 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13MUX13R/W0hSelects the output of Mux13 to drive OUTPUT6 of OUTPUT-XBAR

0: Respective output of Mux13 is disabled to drive the OUTPUT6 of OUTPUT-XBAR
1: Respective output of Mux13 is enabled to drive the OUTPUT6 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

12MUX12R/W0hSelects the output of Mux12 to drive OUTPUT6 of OUTPUT-XBAR

0: Respective output of Mux12 is disabled to drive the OUTPUT6 of OUTPUT-XBAR
1: Respective output of Mux12 is enabled to drive the OUTPUT6 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11MUX11R/W0hSelects the output of Mux11 to drive OUTPUT6 of OUTPUT-XBAR

0: Respective output of Mux11 is disabled to drive the OUTPUT6 of OUTPUT-XBAR
1: Respective output of Mux11 is enabled to drive the OUTPUT6 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

10MUX10R/W0hSelects the output of Mux10 to drive OUTPUT6 of OUTPUT-XBAR

0: Respective output of Mux10 is disabled to drive the OUTPUT6 of OUTPUT-XBAR
1: Respective output of Mux10 is enabled to drive the OUTPUT6 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9MUX9R/W0hSelects the output of Mux9 to drive OUTPUT6 of OUTPUT-XBAR

0: Respective output of Mux9 is disabled to drive the OUTPUT6 of OUTPUT-XBAR
1: Respective output of Mux9 is enabled to drive the OUTPUT6 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

8MUX8R/W0hSelects the output of Mux8 to drive OUTPUT6 of OUTPUT-XBAR

0: Respective output of Mux8 is disabled to drive the OUTPUT6 of OUTPUT-XBAR
1: Respective output of Mux8 is enabled to drive the OUTPUT6 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7MUX7R/W0hSelects the output of Mux7 to drive OUTPUT6 of OUTPUT-XBAR

0: Respective output of Mux7 is disabled to drive the OUTPUT6 of OUTPUT-XBAR
1: Respective output of Mux7 is enabled to drive the OUTPUT6 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

6MUX6R/W0hSelects the output of Mux6 to drive OUTPUT6 of OUTPUT-XBAR

0: Respective output of Mux6 is disabled to drive the OUTPUT6 of OUTPUT-XBAR
1: Respective output of Mux6 is enabled to drive the OUTPUT6 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5MUX5R/W0hSelects the output of Mux5 to drive OUTPUT6 of OUTPUT-XBAR

0: Respective output of Mux5 is disabled to drive the OUTPUT6 of OUTPUT-XBAR
1: Respective output of Mux5 is enabled to drive the OUTPUT6 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

4MUX4R/W0hSelects the output of Mux4 to drive OUTPUT6 of OUTPUT-XBAR

0: Respective output of Mux4 is disabled to drive the OUTPUT6 of OUTPUT-XBAR
1: Respective output of Mux4 is enabled to drive the OUTPUT6 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3MUX3R/W0hSelects the output of Mux3 to drive OUTPUT6 of OUTPUT-XBAR

0: Respective output of Mux3 is disabled to drive the OUTPUT6 of OUTPUT-XBAR
1: Respective output of Mux3 is enabled to drive the OUTPUT6 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

2MUX2R/W0hSelects the output of Mux2 to drive OUTPUT6 of OUTPUT-XBAR

0: Respective output of Mux2 is disabled to drive the OUTPUT6 of OUTPUT-XBAR
1: Respective output of Mux2 is enabled to drive the OUTPUT6 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1MUX1R/W0hSelects the output of Mux1 to drive OUTPUT6 of OUTPUT-XBAR

0: Respective output of Mux1 is disabled to drive the OUTPUT6 of OUTPUT-XBAR
1: Respective output of Mux1 is enabled to drive the OUTPUT6 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

0MUX0R/W0hSelects the output of mux0 to drive OUTPUT6 of OUTPUT-XBAR

0: Respective output of Mux0 is disabled to drive the OUTPUT6 of OUTPUT-XBAR
1: Respective output of Mux0 is enabled to drive the OUTPUT6 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16.3.8.44 OUTPUT6MUXENABLE32TO63 Register (Offset = 56h) [Reset = 00000000h]

OUTPUT6MUXENABLE32TO63 is shown in Figure 16-210 and described in Table 16-226.

Return to the Summary Table.

Output X-BAR Mux Enable for Output 6

Figure 16-210 OUTPUT6MUXENABLE32TO63 Register
3130292827262524
MUX63MUX62MUX61MUX60MUX59MUX58MUX57MUX56
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
2322212019181716
MUX55MUX54MUX53MUX52MUX51MUX50MUX49MUX48
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
15141312111098
MUX47MUX46MUX45MUX44MUX43MUX42MUX41MUX40
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
76543210
MUX39MUX38MUX37MUX36MUX35MUX34MUX33MUX32
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 16-226 OUTPUT6MUXENABLE32TO63 Register Field Descriptions
BitFieldTypeResetDescription
31MUX63R/W0hSelects the output of MUX63 to drive OUTPUT6 of OUTPUT-XBAR
0: Respective output of MUX63 is disabled to drive the OUTPUT6 of OUTPUT-XBAR
1: Respective output of MUX63 is enabled to drive the OUTPUT6 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

30MUX62R/W0hSelects the output of MUX62 to drive OUTPUT6 of OUTPUT-XBAR
0: Respective output of MUX62 is disabled to drive the OUTPUT6 of OUTPUT-XBAR
1: Respective output of MUX62 is enabled to drive the OUTPUT6 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29MUX61R/W0hSelects the output of MUX61 to drive OUTPUT6 of OUTPUT-XBAR
0: Respective output of MUX61 is disabled to drive the OUTPUT6 of OUTPUT-XBAR
1: Respective output of MUX61 is enabled to drive the OUTPUT6 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

28MUX60R/W0hSelects the output of MUX60 to drive OUTPUT6 of OUTPUT-XBAR
0: Respective output of MUX60 is disabled to drive the OUTPUT6 of OUTPUT-XBAR
1: Respective output of MUX60 is enabled to drive the OUTPUT6 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27MUX59R/W0hSelects the output of MUX59 to drive OUTPUT6 of OUTPUT-XBAR
0: Respective output of MUX59 is disabled to drive the OUTPUT6 of OUTPUT-XBAR
1: Respective output of MUX59 is enabled to drive the OUTPUT6 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

26MUX58R/W0hSelects the output of MUX58 to drive OUTPUT6 of OUTPUT-XBAR
0: Respective output of MUX58 is disabled to drive the OUTPUT6 of OUTPUT-XBAR
1: Respective output of MUX58 is enabled to drive the OUTPUT6 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25MUX57R/W0hSelects the output of MUX57 to drive OUTPUT6 of OUTPUT-XBAR
0: Respective output of MUX57 is disabled to drive the OUTPUT6 of OUTPUT-XBAR
1: Respective output of MUX57 is enabled to drive the OUTPUT6 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

24MUX56R/W0hSelects the output of MUX56 to drive OUTPUT6 of OUTPUT-XBAR
0: Respective output of MUX56 is disabled to drive the OUTPUT6 of OUTPUT-XBAR
1: Respective output of MUX56 is enabled to drive the OUTPUT6 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23MUX55R/W0hSelects the output of MUX55 to drive OUTPUT6 of OUTPUT-XBAR
0: Respective output of MUX55 is disabled to drive the OUTPUT6 of OUTPUT-XBAR
1: Respective output of MUX55 is enabled to drive the OUTPUT6 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

22MUX54R/W0hSelects the output of MUX54 to drive OUTPUT6 of OUTPUT-XBAR
0: Respective output of MUX54 is disabled to drive the OUTPUT6 of OUTPUT-XBAR
1: Respective output of MUX54 is enabled to drive the OUTPUT6 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21MUX53R/W0hSelects the output of MUX53 to drive OUTPUT6 of OUTPUT-XBAR
0: Respective output of MUX53 is disabled to drive the OUTPUT6 of OUTPUT-XBAR
1: Respective output of MUX53 is enabled to drive the OUTPUT6 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

20MUX52R/W0hSelects the output of MUX52 to drive OUTPUT6 of OUTPUT-XBAR
0: Respective output of MUX52 is disabled to drive the OUTPUT6 of OUTPUT-XBAR
1: Respective output of MUX52 is enabled to drive the OUTPUT6 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19MUX51R/W0hSelects the output of MUX51 to drive OUTPUT6 of OUTPUT-XBAR
0: Respective output of MUX51 is disabled to drive the OUTPUT6 of OUTPUT-XBAR
1: Respective output of MUX51 is enabled to drive the OUTPUT6 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

18MUX50R/W0hSelects the output of MUX50 to drive OUTPUT6 of OUTPUT-XBAR
0: Respective output of MUX50 is disabled to drive the OUTPUT6 of OUTPUT-XBAR
1: Respective output of MUX50 is enabled to drive the OUTPUT6 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17MUX49R/W0hSelects the output of MUX49 to drive OUTPUT6 of OUTPUT-XBAR
0: Respective output of MUX49 is disabled to drive the OUTPUT6 of OUTPUT-XBAR
1: Respective output of MUX49 is enabled to drive the OUTPUT6 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16MUX48R/W0hSelects the output of MUX48 to drive OUTPUT6 of OUTPUT-XBAR
0: Respective output of MUX48 is disabled to drive the OUTPUT6 of OUTPUT-XBAR
1: Respective output of MUX48 is enabled to drive the OUTPUT6 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15MUX47R/W0hSelects the output of MUX47 to drive OUTPUT6 of OUTPUT-XBAR
0: Respective output of MUX47 is disabled to drive the OUTPUT6 of OUTPUT-XBAR
1: Respective output of MUX47 is enabled to drive the OUTPUT6 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

14MUX46R/W0hSelects the output of MUX46 to drive OUTPUT6 of OUTPUT-XBAR
0: Respective output of MUX46 is disabled to drive the OUTPUT6 of OUTPUT-XBAR
1: Respective output of MUX46 is enabled to drive the OUTPUT6 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13MUX45R/W0hSelects the output of MUX45 to drive OUTPUT6 of OUTPUT-XBAR
0: Respective output of MUX45 is disabled to drive the OUTPUT6 of OUTPUT-XBAR
1: Respective output of MUX45 is enabled to drive the OUTPUT6 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

12MUX44R/W0hSelects the output of MUX44 to drive OUTPUT6 of OUTPUT-XBAR
0: Respective output of MUX44 is disabled to drive the OUTPUT6 of OUTPUT-XBAR
1: Respective output of MUX44 is enabled to drive the OUTPUT6 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11MUX43R/W0hSelects the output of MUX43 to drive OUTPUT6 of OUTPUT-XBAR
0: Respective output of MUX43 is disabled to drive the OUTPUT6 of OUTPUT-XBAR
1: Respective output of MUX43 is enabled to drive the OUTPUT6 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

10MUX42R/W0hSelects the output of MUX42 to drive OUTPUT6 of OUTPUT-XBAR
0: Respective output of MUX42 is disabled to drive the OUTPUT6 of OUTPUT-XBAR
1: Respective output of MUX42 is enabled to drive the OUTPUT6 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9MUX41R/W0hSelects the output of MUX41 to drive OUTPUT6 of OUTPUT-XBAR
0: Respective output of MUX41 is disabled to drive the OUTPUT6 of OUTPUT-XBAR
1: Respective output of MUX41 is enabled to drive the OUTPUT6 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

8MUX40R/W0hSelects the output of MUX40 to drive OUTPUT6 of OUTPUT-XBAR
0: Respective output of MUX40 is disabled to drive the OUTPUT6 of OUTPUT-XBAR
1: Respective output of MUX40 is enabled to drive the OUTPUT6 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7MUX39R/W0hSelects the output of MUX39 to drive OUTPUT6 of OUTPUT-XBAR
0: Respective output of MUX39 is disabled to drive the OUTPUT6 of OUTPUT-XBAR
1: Respective output of MUX39 is enabled to drive the OUTPUT6 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

6MUX38R/W0hSelects the output of MUX38 to drive OUTPUT6 of OUTPUT-XBAR
0: Respective output of MUX38 is disabled to drive the OUTPUT6 of OUTPUT-XBAR
1: Respective output of MUX38 is enabled to drive the OUTPUT6 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5MUX37R/W0hSelects the output of MUX37 to drive OUTPUT6 of OUTPUT-XBAR
0: Respective output of MUX37 is disabled to drive the OUTPUT6 of OUTPUT-XBAR
1: Respective output of MUX37 is enabled to drive the OUTPUT6 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

4MUX36R/W0hSelects the output of MUX36 to drive OUTPUT6 of OUTPUT-XBAR
0: Respective output of MUX36 is disabled to drive the OUTPUT6 of OUTPUT-XBAR
1: Respective output of MUX36 is enabled to drive the OUTPUT6 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3MUX35R/W0hSelects the output of MUX35 to drive OUTPUT6 of OUTPUT-XBAR
0: Respective output of MUX35 is disabled to drive the OUTPUT6 of OUTPUT-XBAR
1: Respective output of MUX35 is enabled to drive the OUTPUT6 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

2MUX34R/W0hSelects the output of MUX34 to drive OUTPUT6 of OUTPUT-XBAR
0: Respective output of MUX34 is disabled to drive the OUTPUT6 of OUTPUT-XBAR
1: Respective output of MUX34 is enabled to drive the OUTPUT6 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1MUX33R/W0hSelects the output of MUX33 to drive OUTPUT6 of OUTPUT-XBAR
0: Respective output of MUX33 is disabled to drive the OUTPUT6 of OUTPUT-XBAR
1: Respective output of MUX33 is enabled to drive the OUTPUT6 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

0MUX32R/W0hSelects the output of MUX32 to drive OUTPUT6 of OUTPUT-XBAR
0: Respective output of MUX32 is disabled to drive the OUTPUT6 of OUTPUT-XBAR
1: Respective output of MUX32 is enabled to drive the OUTPUT6 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16.3.8.45 OUTPUT7MUXENABLE Register (Offset = 58h) [Reset = 00000000h]

OUTPUT7MUXENABLE is shown in Figure 16-211 and described in Table 16-227.

Return to the Summary Table.

Output X-BAR Mux Enable for Output 7

Figure 16-211 OUTPUT7MUXENABLE Register
3130292827262524
MUX31MUX30MUX29MUX28MUX27MUX26MUX25MUX24
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
2322212019181716
MUX23MUX22MUX21MUX20MUX19MUX18MUX17MUX16
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
15141312111098
MUX15MUX14MUX13MUX12MUX11MUX10MUX9MUX8
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
76543210
MUX7MUX6MUX5MUX4MUX3MUX2MUX1MUX0
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 16-227 OUTPUT7MUXENABLE Register Field Descriptions
BitFieldTypeResetDescription
31MUX31R/W0hSelects the output of Mux31 to drive OUTPUT7 of OUTPUT-XBAR

0: Respective output of Mux31 is disabled to drive the OUTPUT7 of OUTPUT-XBAR
1: Respective output of Mux31 is enabled to drive the OUTPUT7 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

30MUX30R/W0hSelects the output of Mux30 to drive OUTPUT7 of OUTPUT-XBAR

0: Respective output of Mux30 is disabled to drive the OUTPUT7 of OUTPUT-XBAR
1: Respective output of Mux30 is enabled to drive the OUTPUT7 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29MUX29R/W0hSelects the output of Mux29 to drive OUTPUT7 of OUTPUT-XBAR

0: Respective output of Mux29 is disabled to drive the OUTPUT7 of OUTPUT-XBAR
1: Respective output of Mux29 is enabled to drive the OUTPUT7 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

28MUX28R/W0hSelects the output of Mux28 to drive OUTPUT7 of OUTPUT-XBAR

0: Respective output of Mux28 is disabled to drive the OUTPUT7 of OUTPUT-XBAR
1: Respective output of Mux28 is enabled to drive the OUTPUT7 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27MUX27R/W0hSelects the output of Mux27 to drive OUTPUT7 of OUTPUT-XBAR

0: Respective output of Mux27 is disabled to drive the OUTPUT7 of OUTPUT-XBAR
1: Respective output of Mux27 is enabled to drive the OUTPUT7 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

26MUX26R/W0hSelects the output of Mux26 to drive OUTPUT7 of OUTPUT-XBAR

0: Respective output of Mux26 is disabled to drive the OUTPUT7 of OUTPUT-XBAR
1: Respective output of Mux26 is enabled to drive the OUTPUT7 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25MUX25R/W0hSelects the output of Mux25 to drive OUTPUT7 of OUTPUT-XBAR

0: Respective output of Mux25 is disabled to drive the OUTPUT7 of OUTPUT-XBAR
1: Respective output of Mux25 is enabled to drive the OUTPUT7 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

24MUX24R/W0hSelects the output of Mux24 to drive OUTPUT7 of OUTPUT-XBAR

0: Respective output of Mux24 is disabled to drive the OUTPUT7 of OUTPUT-XBAR
1: Respective output of Mux24 is enabled to drive the OUTPUT7 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23MUX23R/W0hSelects the output of Mux23 to drive OUTPUT7 of OUTPUT-XBAR

0: Respective output of Mux23 is disabled to drive the OUTPUT7 of OUTPUT-XBAR
1: Respective output of Mux23 is enabled to drive the OUTPUT7 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

22MUX22R/W0hSelects the output of Mux22 to drive OUTPUT7 of OUTPUT-XBAR

0: Respective output of Mux22 is disabled to drive the OUTPUT7 of OUTPUT-XBAR
1: Respective output of Mux22 is enabled to drive the OUTPUT7 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21MUX21R/W0hSelects the output of Mux21 to drive OUTPUT7 of OUTPUT-XBAR

0: Respective output of Mux21 is disabled to drive the OUTPUT7 of OUTPUT-XBAR
1: Respective output of Mux21 is enabled to drive the OUTPUT7 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

20MUX20R/W0hSelects the output of Mux20 to drive OUTPUT7 of OUTPUT-XBAR

0: Respective output of Mux20 is disabled to drive the OUTPUT7 of OUTPUT-XBAR
1: Respective output of Mux20 is enabled to drive the OUTPUT7 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19MUX19R/W0hSelects the output of Mux19 to drive OUTPUT7 of OUTPUT-XBAR

0: Respective output of Mux19 is disabled to drive the OUTPUT7 of OUTPUT-XBAR
1: Respective output of Mux19 is enabled to drive the OUTPUT7 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

18MUX18R/W0hSelects the output of Mux18 to drive OUTPUT7 of OUTPUT-XBAR

0: Respective output of Mux18 is disabled to drive the OUTPUT7 of OUTPUT-XBAR
1: Respective output of Mux18 is enabled to drive the OUTPUT7 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17MUX17R/W0hSelects the output of Mux17 to drive OUTPUT7 of OUTPUT-XBAR

0: Respective output of Mux17 is disabled to drive the OUTPUT7 of OUTPUT-XBAR
1: Respective output of Mux17 is enabled to drive the OUTPUT7 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16MUX16R/W0hSelects the output of Mux16 to drive OUTPUT7 of OUTPUT-XBAR

0: Respective output of Mux16 is disabled to drive the OUTPUT7 of OUTPUT-XBAR
1: Respective output of Mux16 is enabled to drive the OUTPUT7 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15MUX15R/W0hSelects the output of Mux15 to drive OUTPUT7 of OUTPUT-XBAR

0: Respective output of Mux15 is disabled to drive the OUTPUT7 of OUTPUT-XBAR
1: Respective output of Mux15 is enabled to drive the OUTPUT7 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

14MUX14R/W0hSelects the output of Mux14 to drive OUTPUT7 of OUTPUT-XBAR

0: Respective output of Mux14 is disabled to drive the OUTPUT7 of OUTPUT-XBAR
1: Respective output of Mux14 is enabled to drive the OUTPUT7 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13MUX13R/W0hSelects the output of Mux13 to drive OUTPUT7 of OUTPUT-XBAR

0: Respective output of Mux13 is disabled to drive the OUTPUT7 of OUTPUT-XBAR
1: Respective output of Mux13 is enabled to drive the OUTPUT7 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

12MUX12R/W0hSelects the output of Mux12 to drive OUTPUT7 of OUTPUT-XBAR

0: Respective output of Mux12 is disabled to drive the OUTPUT7 of OUTPUT-XBAR
1: Respective output of Mux12 is enabled to drive the OUTPUT7 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11MUX11R/W0hSelects the output of Mux11 to drive OUTPUT7 of OUTPUT-XBAR

0: Respective output of Mux11 is disabled to drive the OUTPUT7 of OUTPUT-XBAR
1: Respective output of Mux11 is enabled to drive the OUTPUT7 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

10MUX10R/W0hSelects the output of Mux10 to drive OUTPUT7 of OUTPUT-XBAR

0: Respective output of Mux10 is disabled to drive the OUTPUT7 of OUTPUT-XBAR
1: Respective output of Mux10 is enabled to drive the OUTPUT7 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9MUX9R/W0hSelects the output of Mux9 to drive OUTPUT7 of OUTPUT-XBAR

0: Respective output of Mux9 is disabled to drive the OUTPUT7 of OUTPUT-XBAR
1: Respective output of Mux9 is enabled to drive the OUTPUT7 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

8MUX8R/W0hSelects the output of Mux8 to drive OUTPUT7 of OUTPUT-XBAR

0: Respective output of Mux8 is disabled to drive the OUTPUT7 of OUTPUT-XBAR
1: Respective output of Mux8 is enabled to drive the OUTPUT7 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7MUX7R/W0hSelects the output of Mux7 to drive OUTPUT7 of OUTPUT-XBAR

0: Respective output of Mux7 is disabled to drive the OUTPUT7 of OUTPUT-XBAR
1: Respective output of Mux7 is enabled to drive the OUTPUT7 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

6MUX6R/W0hSelects the output of Mux6 to drive OUTPUT7 of OUTPUT-XBAR

0: Respective output of Mux6 is disabled to drive the OUTPUT7 of OUTPUT-XBAR
1: Respective output of Mux6 is enabled to drive the OUTPUT7 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5MUX5R/W0hSelects the output of Mux5 to drive OUTPUT7 of OUTPUT-XBAR

0: Respective output of Mux5 is disabled to drive the OUTPUT7 of OUTPUT-XBAR
1: Respective output of Mux5 is enabled to drive the OUTPUT7 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

4MUX4R/W0hSelects the output of Mux4 to drive OUTPUT7 of OUTPUT-XBAR

0: Respective output of Mux4 is disabled to drive the OUTPUT7 of OUTPUT-XBAR
1: Respective output of Mux4 is enabled to drive the OUTPUT7 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3MUX3R/W0hSelects the output of Mux3 to drive OUTPUT7 of OUTPUT-XBAR

0: Respective output of Mux3 is disabled to drive the OUTPUT7 of OUTPUT-XBAR
1: Respective output of Mux3 is enabled to drive the OUTPUT7 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

2MUX2R/W0hSelects the output of Mux2 to drive OUTPUT7 of OUTPUT-XBAR

0: Respective output of Mux2 is disabled to drive the OUTPUT7 of OUTPUT-XBAR
1: Respective output of Mux2 is enabled to drive the OUTPUT7 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1MUX1R/W0hSelects the output of Mux1 to drive OUTPUT7 of OUTPUT-XBAR

0: Respective output of Mux1 is disabled to drive the OUTPUT7 of OUTPUT-XBAR
1: Respective output of Mux1 is enabled to drive the OUTPUT7 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

0MUX0R/W0hSelects the output of mux0 to drive OUTPUT7 of OUTPUT-XBAR

0: Respective output of Mux0 is disabled to drive the OUTPUT7 of OUTPUT-XBAR
1: Respective output of Mux0 is enabled to drive the OUTPUT7 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16.3.8.46 OUTPUT7MUXENABLE32TO63 Register (Offset = 5Ah) [Reset = 00000000h]

OUTPUT7MUXENABLE32TO63 is shown in Figure 16-212 and described in Table 16-228.

Return to the Summary Table.

Output X-BAR Mux Enable for Output 7

Figure 16-212 OUTPUT7MUXENABLE32TO63 Register
3130292827262524
MUX63MUX62MUX61MUX60MUX59MUX58MUX57MUX56
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
2322212019181716
MUX55MUX54MUX53MUX52MUX51MUX50MUX49MUX48
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
15141312111098
MUX47MUX46MUX45MUX44MUX43MUX42MUX41MUX40
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
76543210
MUX39MUX38MUX37MUX36MUX35MUX34MUX33MUX32
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 16-228 OUTPUT7MUXENABLE32TO63 Register Field Descriptions
BitFieldTypeResetDescription
31MUX63R/W0hSelects the output of MUX63 to drive OUTPUT7 of OUTPUT-XBAR
0: Respective output of MUX63 is disabled to drive the OUTPUT7 of OUTPUT-XBAR
1: Respective output of MUX63 is enabled to drive the OUTPUT7 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

30MUX62R/W0hSelects the output of MUX62 to drive OUTPUT7 of OUTPUT-XBAR
0: Respective output of MUX62 is disabled to drive the OUTPUT7 of OUTPUT-XBAR
1: Respective output of MUX62 is enabled to drive the OUTPUT7 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29MUX61R/W0hSelects the output of MUX61 to drive OUTPUT7 of OUTPUT-XBAR
0: Respective output of MUX61 is disabled to drive the OUTPUT7 of OUTPUT-XBAR
1: Respective output of MUX61 is enabled to drive the OUTPUT7 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

28MUX60R/W0hSelects the output of MUX60 to drive OUTPUT7 of OUTPUT-XBAR
0: Respective output of MUX60 is disabled to drive the OUTPUT7 of OUTPUT-XBAR
1: Respective output of MUX60 is enabled to drive the OUTPUT7 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27MUX59R/W0hSelects the output of MUX59 to drive OUTPUT7 of OUTPUT-XBAR
0: Respective output of MUX59 is disabled to drive the OUTPUT7 of OUTPUT-XBAR
1: Respective output of MUX59 is enabled to drive the OUTPUT7 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

26MUX58R/W0hSelects the output of MUX58 to drive OUTPUT7 of OUTPUT-XBAR
0: Respective output of MUX58 is disabled to drive the OUTPUT7 of OUTPUT-XBAR
1: Respective output of MUX58 is enabled to drive the OUTPUT7 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25MUX57R/W0hSelects the output of MUX57 to drive OUTPUT7 of OUTPUT-XBAR
0: Respective output of MUX57 is disabled to drive the OUTPUT7 of OUTPUT-XBAR
1: Respective output of MUX57 is enabled to drive the OUTPUT7 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

24MUX56R/W0hSelects the output of MUX56 to drive OUTPUT7 of OUTPUT-XBAR
0: Respective output of MUX56 is disabled to drive the OUTPUT7 of OUTPUT-XBAR
1: Respective output of MUX56 is enabled to drive the OUTPUT7 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23MUX55R/W0hSelects the output of MUX55 to drive OUTPUT7 of OUTPUT-XBAR
0: Respective output of MUX55 is disabled to drive the OUTPUT7 of OUTPUT-XBAR
1: Respective output of MUX55 is enabled to drive the OUTPUT7 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

22MUX54R/W0hSelects the output of MUX54 to drive OUTPUT7 of OUTPUT-XBAR
0: Respective output of MUX54 is disabled to drive the OUTPUT7 of OUTPUT-XBAR
1: Respective output of MUX54 is enabled to drive the OUTPUT7 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21MUX53R/W0hSelects the output of MUX53 to drive OUTPUT7 of OUTPUT-XBAR
0: Respective output of MUX53 is disabled to drive the OUTPUT7 of OUTPUT-XBAR
1: Respective output of MUX53 is enabled to drive the OUTPUT7 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

20MUX52R/W0hSelects the output of MUX52 to drive OUTPUT7 of OUTPUT-XBAR
0: Respective output of MUX52 is disabled to drive the OUTPUT7 of OUTPUT-XBAR
1: Respective output of MUX52 is enabled to drive the OUTPUT7 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19MUX51R/W0hSelects the output of MUX51 to drive OUTPUT7 of OUTPUT-XBAR
0: Respective output of MUX51 is disabled to drive the OUTPUT7 of OUTPUT-XBAR
1: Respective output of MUX51 is enabled to drive the OUTPUT7 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

18MUX50R/W0hSelects the output of MUX50 to drive OUTPUT7 of OUTPUT-XBAR
0: Respective output of MUX50 is disabled to drive the OUTPUT7 of OUTPUT-XBAR
1: Respective output of MUX50 is enabled to drive the OUTPUT7 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17MUX49R/W0hSelects the output of MUX49 to drive OUTPUT7 of OUTPUT-XBAR
0: Respective output of MUX49 is disabled to drive the OUTPUT7 of OUTPUT-XBAR
1: Respective output of MUX49 is enabled to drive the OUTPUT7 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16MUX48R/W0hSelects the output of MUX48 to drive OUTPUT7 of OUTPUT-XBAR
0: Respective output of MUX48 is disabled to drive the OUTPUT7 of OUTPUT-XBAR
1: Respective output of MUX48 is enabled to drive the OUTPUT7 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15MUX47R/W0hSelects the output of MUX47 to drive OUTPUT7 of OUTPUT-XBAR
0: Respective output of MUX47 is disabled to drive the OUTPUT7 of OUTPUT-XBAR
1: Respective output of MUX47 is enabled to drive the OUTPUT7 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

14MUX46R/W0hSelects the output of MUX46 to drive OUTPUT7 of OUTPUT-XBAR
0: Respective output of MUX46 is disabled to drive the OUTPUT7 of OUTPUT-XBAR
1: Respective output of MUX46 is enabled to drive the OUTPUT7 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13MUX45R/W0hSelects the output of MUX45 to drive OUTPUT7 of OUTPUT-XBAR
0: Respective output of MUX45 is disabled to drive the OUTPUT7 of OUTPUT-XBAR
1: Respective output of MUX45 is enabled to drive the OUTPUT7 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

12MUX44R/W0hSelects the output of MUX44 to drive OUTPUT7 of OUTPUT-XBAR
0: Respective output of MUX44 is disabled to drive the OUTPUT7 of OUTPUT-XBAR
1: Respective output of MUX44 is enabled to drive the OUTPUT7 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11MUX43R/W0hSelects the output of MUX43 to drive OUTPUT7 of OUTPUT-XBAR
0: Respective output of MUX43 is disabled to drive the OUTPUT7 of OUTPUT-XBAR
1: Respective output of MUX43 is enabled to drive the OUTPUT7 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

10MUX42R/W0hSelects the output of MUX42 to drive OUTPUT7 of OUTPUT-XBAR
0: Respective output of MUX42 is disabled to drive the OUTPUT7 of OUTPUT-XBAR
1: Respective output of MUX42 is enabled to drive the OUTPUT7 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9MUX41R/W0hSelects the output of MUX41 to drive OUTPUT7 of OUTPUT-XBAR
0: Respective output of MUX41 is disabled to drive the OUTPUT7 of OUTPUT-XBAR
1: Respective output of MUX41 is enabled to drive the OUTPUT7 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

8MUX40R/W0hSelects the output of MUX40 to drive OUTPUT7 of OUTPUT-XBAR
0: Respective output of MUX40 is disabled to drive the OUTPUT7 of OUTPUT-XBAR
1: Respective output of MUX40 is enabled to drive the OUTPUT7 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7MUX39R/W0hSelects the output of MUX39 to drive OUTPUT7 of OUTPUT-XBAR
0: Respective output of MUX39 is disabled to drive the OUTPUT7 of OUTPUT-XBAR
1: Respective output of MUX39 is enabled to drive the OUTPUT7 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

6MUX38R/W0hSelects the output of MUX38 to drive OUTPUT7 of OUTPUT-XBAR
0: Respective output of MUX38 is disabled to drive the OUTPUT7 of OUTPUT-XBAR
1: Respective output of MUX38 is enabled to drive the OUTPUT7 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5MUX37R/W0hSelects the output of MUX37 to drive OUTPUT7 of OUTPUT-XBAR
0: Respective output of MUX37 is disabled to drive the OUTPUT7 of OUTPUT-XBAR
1: Respective output of MUX37 is enabled to drive the OUTPUT7 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

4MUX36R/W0hSelects the output of MUX36 to drive OUTPUT7 of OUTPUT-XBAR
0: Respective output of MUX36 is disabled to drive the OUTPUT7 of OUTPUT-XBAR
1: Respective output of MUX36 is enabled to drive the OUTPUT7 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3MUX35R/W0hSelects the output of MUX35 to drive OUTPUT7 of OUTPUT-XBAR
0: Respective output of MUX35 is disabled to drive the OUTPUT7 of OUTPUT-XBAR
1: Respective output of MUX35 is enabled to drive the OUTPUT7 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

2MUX34R/W0hSelects the output of MUX34 to drive OUTPUT7 of OUTPUT-XBAR
0: Respective output of MUX34 is disabled to drive the OUTPUT7 of OUTPUT-XBAR
1: Respective output of MUX34 is enabled to drive the OUTPUT7 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1MUX33R/W0hSelects the output of MUX33 to drive OUTPUT7 of OUTPUT-XBAR
0: Respective output of MUX33 is disabled to drive the OUTPUT7 of OUTPUT-XBAR
1: Respective output of MUX33 is enabled to drive the OUTPUT7 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

0MUX32R/W0hSelects the output of MUX32 to drive OUTPUT7 of OUTPUT-XBAR
0: Respective output of MUX32 is disabled to drive the OUTPUT7 of OUTPUT-XBAR
1: Respective output of MUX32 is enabled to drive the OUTPUT7 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16.3.8.47 OUTPUT8MUXENABLE Register (Offset = 5Ch) [Reset = 00000000h]

OUTPUT8MUXENABLE is shown in Figure 16-213 and described in Table 16-229.

Return to the Summary Table.

Output X-BAR Mux Enable for Output 8

Figure 16-213 OUTPUT8MUXENABLE Register
3130292827262524
MUX31MUX30MUX29MUX28MUX27MUX26MUX25MUX24
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
2322212019181716
MUX23MUX22MUX21MUX20MUX19MUX18MUX17MUX16
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
15141312111098
MUX15MUX14MUX13MUX12MUX11MUX10MUX9MUX8
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
76543210
MUX7MUX6MUX5MUX4MUX3MUX2MUX1MUX0
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 16-229 OUTPUT8MUXENABLE Register Field Descriptions
BitFieldTypeResetDescription
31MUX31R/W0hSelects the output of Mux31 to drive OUTPUT8 of OUTPUT-XBAR

0: Respective output of Mux31 is disabled to drive the OUTPUT8 of OUTPUT-XBAR
1: Respective output of Mux31 is enabled to drive the OUTPUT8 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

30MUX30R/W0hSelects the output of Mux30 to drive OUTPUT8 of OUTPUT-XBAR

0: Respective output of Mux30 is disabled to drive the OUTPUT8 of OUTPUT-XBAR
1: Respective output of Mux30 is enabled to drive the OUTPUT8 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29MUX29R/W0hSelects the output of Mux29 to drive OUTPUT8 of OUTPUT-XBAR

0: Respective output of Mux29 is disabled to drive the OUTPUT8 of OUTPUT-XBAR
1: Respective output of Mux29 is enabled to drive the OUTPUT8 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

28MUX28R/W0hSelects the output of Mux28 to drive OUTPUT8 of OUTPUT-XBAR

0: Respective output of Mux28 is disabled to drive the OUTPUT8 of OUTPUT-XBAR
1: Respective output of Mux28 is enabled to drive the OUTPUT8 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27MUX27R/W0hSelects the output of Mux27 to drive OUTPUT8 of OUTPUT-XBAR

0: Respective output of Mux27 is disabled to drive the OUTPUT8 of OUTPUT-XBAR
1: Respective output of Mux27 is enabled to drive the OUTPUT8 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

26MUX26R/W0hSelects the output of Mux26 to drive OUTPUT8 of OUTPUT-XBAR

0: Respective output of Mux26 is disabled to drive the OUTPUT8 of OUTPUT-XBAR
1: Respective output of Mux26 is enabled to drive the OUTPUT8 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25MUX25R/W0hSelects the output of Mux25 to drive OUTPUT8 of OUTPUT-XBAR

0: Respective output of Mux25 is disabled to drive the OUTPUT8 of OUTPUT-XBAR
1: Respective output of Mux25 is enabled to drive the OUTPUT8 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

24MUX24R/W0hSelects the output of Mux24 to drive OUTPUT8 of OUTPUT-XBAR

0: Respective output of Mux24 is disabled to drive the OUTPUT8 of OUTPUT-XBAR
1: Respective output of Mux24 is enabled to drive the OUTPUT8 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23MUX23R/W0hSelects the output of Mux23 to drive OUTPUT8 of OUTPUT-XBAR

0: Respective output of Mux23 is disabled to drive the OUTPUT8 of OUTPUT-XBAR
1: Respective output of Mux23 is enabled to drive the OUTPUT8 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

22MUX22R/W0hSelects the output of Mux22 to drive OUTPUT8 of OUTPUT-XBAR

0: Respective output of Mux22 is disabled to drive the OUTPUT8 of OUTPUT-XBAR
1: Respective output of Mux22 is enabled to drive the OUTPUT8 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21MUX21R/W0hSelects the output of Mux21 to drive OUTPUT8 of OUTPUT-XBAR

0: Respective output of Mux21 is disabled to drive the OUTPUT8 of OUTPUT-XBAR
1: Respective output of Mux21 is enabled to drive the OUTPUT8 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

20MUX20R/W0hSelects the output of Mux20 to drive OUTPUT8 of OUTPUT-XBAR

0: Respective output of Mux20 is disabled to drive the OUTPUT8 of OUTPUT-XBAR
1: Respective output of Mux20 is enabled to drive the OUTPUT8 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19MUX19R/W0hSelects the output of Mux19 to drive OUTPUT8 of OUTPUT-XBAR

0: Respective output of Mux19 is disabled to drive the OUTPUT8 of OUTPUT-XBAR
1: Respective output of Mux19 is enabled to drive the OUTPUT8 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

18MUX18R/W0hSelects the output of Mux18 to drive OUTPUT8 of OUTPUT-XBAR

0: Respective output of Mux18 is disabled to drive the OUTPUT8 of OUTPUT-XBAR
1: Respective output of Mux18 is enabled to drive the OUTPUT8 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17MUX17R/W0hSelects the output of Mux17 to drive OUTPUT8 of OUTPUT-XBAR

0: Respective output of Mux17 is disabled to drive the OUTPUT8 of OUTPUT-XBAR
1: Respective output of Mux17 is enabled to drive the OUTPUT8 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16MUX16R/W0hSelects the output of Mux16 to drive OUTPUT8 of OUTPUT-XBAR

0: Respective output of Mux16 is disabled to drive the OUTPUT8 of OUTPUT-XBAR
1: Respective output of Mux16 is enabled to drive the OUTPUT8 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15MUX15R/W0hSelects the output of Mux15 to drive OUTPUT8 of OUTPUT-XBAR

0: Respective output of Mux15 is disabled to drive the OUTPUT8 of OUTPUT-XBAR
1: Respective output of Mux15 is enabled to drive the OUTPUT8 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

14MUX14R/W0hSelects the output of Mux14 to drive OUTPUT8 of OUTPUT-XBAR

0: Respective output of Mux14 is disabled to drive the OUTPUT8 of OUTPUT-XBAR
1: Respective output of Mux14 is enabled to drive the OUTPUT8 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13MUX13R/W0hSelects the output of Mux13 to drive OUTPUT8 of OUTPUT-XBAR

0: Respective output of Mux13 is disabled to drive the OUTPUT8 of OUTPUT-XBAR
1: Respective output of Mux13 is enabled to drive the OUTPUT8 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

12MUX12R/W0hSelects the output of Mux12 to drive OUTPUT8 of OUTPUT-XBAR

0: Respective output of Mux12 is disabled to drive the OUTPUT8 of OUTPUT-XBAR
1: Respective output of Mux12 is enabled to drive the OUTPUT8 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11MUX11R/W0hSelects the output of Mux11 to drive OUTPUT8 of OUTPUT-XBAR

0: Respective output of Mux11 is disabled to drive the OUTPUT8 of OUTPUT-XBAR
1: Respective output of Mux11 is enabled to drive the OUTPUT8 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

10MUX10R/W0hSelects the output of Mux10 to drive OUTPUT8 of OUTPUT-XBAR

0: Respective output of Mux10 is disabled to drive the OUTPUT8 of OUTPUT-XBAR
1: Respective output of Mux10 is enabled to drive the OUTPUT8 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9MUX9R/W0hSelects the output of Mux9 to drive OUTPUT8 of OUTPUT-XBAR

0: Respective output of Mux9 is disabled to drive the OUTPUT8 of OUTPUT-XBAR
1: Respective output of Mux9 is enabled to drive the OUTPUT8 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

8MUX8R/W0hSelects the output of Mux8 to drive OUTPUT8 of OUTPUT-XBAR

0: Respective output of Mux8 is disabled to drive the OUTPUT8 of OUTPUT-XBAR
1: Respective output of Mux8 is enabled to drive the OUTPUT8 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7MUX7R/W0hSelects the output of Mux7 to drive OUTPUT8 of OUTPUT-XBAR

0: Respective output of Mux7 is disabled to drive the OUTPUT8 of OUTPUT-XBAR
1: Respective output of Mux7 is enabled to drive the OUTPUT8 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

6MUX6R/W0hSelects the output of Mux6 to drive OUTPUT8 of OUTPUT-XBAR

0: Respective output of Mux6 is disabled to drive the OUTPUT8 of OUTPUT-XBAR
1: Respective output of Mux6 is enabled to drive the OUTPUT8 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5MUX5R/W0hSelects the output of Mux5 to drive OUTPUT8 of OUTPUT-XBAR

0: Respective output of Mux5 is disabled to drive the OUTPUT8 of OUTPUT-XBAR
1: Respective output of Mux5 is enabled to drive the OUTPUT8 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

4MUX4R/W0hSelects the output of Mux4 to drive OUTPUT8 of OUTPUT-XBAR

0: Respective output of Mux4 is disabled to drive the OUTPUT8 of OUTPUT-XBAR
1: Respective output of Mux4 is enabled to drive the OUTPUT8 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3MUX3R/W0hSelects the output of Mux3 to drive OUTPUT8 of OUTPUT-XBAR

0: Respective output of Mux3 is disabled to drive the OUTPUT8 of OUTPUT-XBAR
1: Respective output of Mux3 is enabled to drive the OUTPUT8 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

2MUX2R/W0hSelects the output of Mux2 to drive OUTPUT8 of OUTPUT-XBAR

0: Respective output of Mux2 is disabled to drive the OUTPUT8 of OUTPUT-XBAR
1: Respective output of Mux2 is enabled to drive the OUTPUT8 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1MUX1R/W0hSelects the output of Mux1 to drive OUTPUT8 of OUTPUT-XBAR

0: Respective output of Mux1 is disabled to drive the OUTPUT8 of OUTPUT-XBAR
1: Respective output of Mux1 is enabled to drive the OUTPUT8 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

0MUX0R/W0hSelects the output of mux0 to drive OUTPUT8 of OUTPUT-XBAR

0: Respective output of Mux0 is disabled to drive the OUTPUT8 of OUTPUT-XBAR
1: Respective output of Mux0 is enabled to drive the OUTPUT8 of OUTPUT-XBAR

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16.3.8.48 OUTPUT8MUXENABLE32TO63 Register (Offset = 5Eh) [Reset = 00000000h]

OUTPUT8MUXENABLE32TO63 is shown in Figure 16-214 and described in Table 16-230.

Return to the Summary Table.

Output X-BAR Mux Enable for Output 8

Figure 16-214 OUTPUT8MUXENABLE32TO63 Register
3130292827262524
MUX63MUX62MUX61MUX60MUX59MUX58MUX57MUX56
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
2322212019181716
MUX55MUX54MUX53MUX52MUX51MUX50MUX49MUX48
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
15141312111098
MUX47MUX46MUX45MUX44MUX43MUX42MUX41MUX40
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
76543210
MUX39MUX38MUX37MUX36MUX35MUX34MUX33MUX32
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 16-230 OUTPUT8MUXENABLE32TO63 Register Field Descriptions
BitFieldTypeResetDescription
31MUX63R/W0hSelects the output of MUX63 to drive OUTPUT8 of OUTPUT-XBAR
0: Respective output of MUX63 is disabled to drive the OUTPUT8 of OUTPUT-XBAR
1: Respective output of MUX63 is enabled to drive the OUTPUT8 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

30MUX62R/W0hSelects the output of MUX62 to drive OUTPUT8 of OUTPUT-XBAR
0: Respective output of MUX62 is disabled to drive the OUTPUT8 of OUTPUT-XBAR
1: Respective output of MUX62 is enabled to drive the OUTPUT8 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29MUX61R/W0hSelects the output of MUX61 to drive OUTPUT8 of OUTPUT-XBAR
0: Respective output of MUX61 is disabled to drive the OUTPUT8 of OUTPUT-XBAR
1: Respective output of MUX61 is enabled to drive the OUTPUT8 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

28MUX60R/W0hSelects the output of MUX60 to drive OUTPUT8 of OUTPUT-XBAR
0: Respective output of MUX60 is disabled to drive the OUTPUT8 of OUTPUT-XBAR
1: Respective output of MUX60 is enabled to drive the OUTPUT8 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27MUX59R/W0hSelects the output of MUX59 to drive OUTPUT8 of OUTPUT-XBAR
0: Respective output of MUX59 is disabled to drive the OUTPUT8 of OUTPUT-XBAR
1: Respective output of MUX59 is enabled to drive the OUTPUT8 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

26MUX58R/W0hSelects the output of MUX58 to drive OUTPUT8 of OUTPUT-XBAR
0: Respective output of MUX58 is disabled to drive the OUTPUT8 of OUTPUT-XBAR
1: Respective output of MUX58 is enabled to drive the OUTPUT8 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25MUX57R/W0hSelects the output of MUX57 to drive OUTPUT8 of OUTPUT-XBAR
0: Respective output of MUX57 is disabled to drive the OUTPUT8 of OUTPUT-XBAR
1: Respective output of MUX57 is enabled to drive the OUTPUT8 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

24MUX56R/W0hSelects the output of MUX56 to drive OUTPUT8 of OUTPUT-XBAR
0: Respective output of MUX56 is disabled to drive the OUTPUT8 of OUTPUT-XBAR
1: Respective output of MUX56 is enabled to drive the OUTPUT8 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23MUX55R/W0hSelects the output of MUX55 to drive OUTPUT8 of OUTPUT-XBAR
0: Respective output of MUX55 is disabled to drive the OUTPUT8 of OUTPUT-XBAR
1: Respective output of MUX55 is enabled to drive the OUTPUT8 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

22MUX54R/W0hSelects the output of MUX54 to drive OUTPUT8 of OUTPUT-XBAR
0: Respective output of MUX54 is disabled to drive the OUTPUT8 of OUTPUT-XBAR
1: Respective output of MUX54 is enabled to drive the OUTPUT8 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21MUX53R/W0hSelects the output of MUX53 to drive OUTPUT8 of OUTPUT-XBAR
0: Respective output of MUX53 is disabled to drive the OUTPUT8 of OUTPUT-XBAR
1: Respective output of MUX53 is enabled to drive the OUTPUT8 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

20MUX52R/W0hSelects the output of MUX52 to drive OUTPUT8 of OUTPUT-XBAR
0: Respective output of MUX52 is disabled to drive the OUTPUT8 of OUTPUT-XBAR
1: Respective output of MUX52 is enabled to drive the OUTPUT8 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19MUX51R/W0hSelects the output of MUX51 to drive OUTPUT8 of OUTPUT-XBAR
0: Respective output of MUX51 is disabled to drive the OUTPUT8 of OUTPUT-XBAR
1: Respective output of MUX51 is enabled to drive the OUTPUT8 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

18MUX50R/W0hSelects the output of MUX50 to drive OUTPUT8 of OUTPUT-XBAR
0: Respective output of MUX50 is disabled to drive the OUTPUT8 of OUTPUT-XBAR
1: Respective output of MUX50 is enabled to drive the OUTPUT8 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17MUX49R/W0hSelects the output of MUX49 to drive OUTPUT8 of OUTPUT-XBAR
0: Respective output of MUX49 is disabled to drive the OUTPUT8 of OUTPUT-XBAR
1: Respective output of MUX49 is enabled to drive the OUTPUT8 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16MUX48R/W0hSelects the output of MUX48 to drive OUTPUT8 of OUTPUT-XBAR
0: Respective output of MUX48 is disabled to drive the OUTPUT8 of OUTPUT-XBAR
1: Respective output of MUX48 is enabled to drive the OUTPUT8 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15MUX47R/W0hSelects the output of MUX47 to drive OUTPUT8 of OUTPUT-XBAR
0: Respective output of MUX47 is disabled to drive the OUTPUT8 of OUTPUT-XBAR
1: Respective output of MUX47 is enabled to drive the OUTPUT8 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

14MUX46R/W0hSelects the output of MUX46 to drive OUTPUT8 of OUTPUT-XBAR
0: Respective output of MUX46 is disabled to drive the OUTPUT8 of OUTPUT-XBAR
1: Respective output of MUX46 is enabled to drive the OUTPUT8 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13MUX45R/W0hSelects the output of MUX45 to drive OUTPUT8 of OUTPUT-XBAR
0: Respective output of MUX45 is disabled to drive the OUTPUT8 of OUTPUT-XBAR
1: Respective output of MUX45 is enabled to drive the OUTPUT8 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

12MUX44R/W0hSelects the output of MUX44 to drive OUTPUT8 of OUTPUT-XBAR
0: Respective output of MUX44 is disabled to drive the OUTPUT8 of OUTPUT-XBAR
1: Respective output of MUX44 is enabled to drive the OUTPUT8 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11MUX43R/W0hSelects the output of MUX43 to drive OUTPUT8 of OUTPUT-XBAR
0: Respective output of MUX43 is disabled to drive the OUTPUT8 of OUTPUT-XBAR
1: Respective output of MUX43 is enabled to drive the OUTPUT8 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

10MUX42R/W0hSelects the output of MUX42 to drive OUTPUT8 of OUTPUT-XBAR
0: Respective output of MUX42 is disabled to drive the OUTPUT8 of OUTPUT-XBAR
1: Respective output of MUX42 is enabled to drive the OUTPUT8 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9MUX41R/W0hSelects the output of MUX41 to drive OUTPUT8 of OUTPUT-XBAR
0: Respective output of MUX41 is disabled to drive the OUTPUT8 of OUTPUT-XBAR
1: Respective output of MUX41 is enabled to drive the OUTPUT8 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

8MUX40R/W0hSelects the output of MUX40 to drive OUTPUT8 of OUTPUT-XBAR
0: Respective output of MUX40 is disabled to drive the OUTPUT8 of OUTPUT-XBAR
1: Respective output of MUX40 is enabled to drive the OUTPUT8 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7MUX39R/W0hSelects the output of MUX39 to drive OUTPUT8 of OUTPUT-XBAR
0: Respective output of MUX39 is disabled to drive the OUTPUT8 of OUTPUT-XBAR
1: Respective output of MUX39 is enabled to drive the OUTPUT8 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

6MUX38R/W0hSelects the output of MUX38 to drive OUTPUT8 of OUTPUT-XBAR
0: Respective output of MUX38 is disabled to drive the OUTPUT8 of OUTPUT-XBAR
1: Respective output of MUX38 is enabled to drive the OUTPUT8 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5MUX37R/W0hSelects the output of MUX37 to drive OUTPUT8 of OUTPUT-XBAR
0: Respective output of MUX37 is disabled to drive the OUTPUT8 of OUTPUT-XBAR
1: Respective output of MUX37 is enabled to drive the OUTPUT8 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

4MUX36R/W0hSelects the output of MUX36 to drive OUTPUT8 of OUTPUT-XBAR
0: Respective output of MUX36 is disabled to drive the OUTPUT8 of OUTPUT-XBAR
1: Respective output of MUX36 is enabled to drive the OUTPUT8 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3MUX35R/W0hSelects the output of MUX35 to drive OUTPUT8 of OUTPUT-XBAR
0: Respective output of MUX35 is disabled to drive the OUTPUT8 of OUTPUT-XBAR
1: Respective output of MUX35 is enabled to drive the OUTPUT8 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

2MUX34R/W0hSelects the output of MUX34 to drive OUTPUT8 of OUTPUT-XBAR
0: Respective output of MUX34 is disabled to drive the OUTPUT8 of OUTPUT-XBAR
1: Respective output of MUX34 is enabled to drive the OUTPUT8 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1MUX33R/W0hSelects the output of MUX33 to drive OUTPUT8 of OUTPUT-XBAR
0: Respective output of MUX33 is disabled to drive the OUTPUT8 of OUTPUT-XBAR
1: Respective output of MUX33 is enabled to drive the OUTPUT8 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

0MUX32R/W0hSelects the output of MUX32 to drive OUTPUT8 of OUTPUT-XBAR
0: Respective output of MUX32 is disabled to drive the OUTPUT8 of OUTPUT-XBAR
1: Respective output of MUX32 is enabled to drive the OUTPUT8 of OUTPUT-XBAR
Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16.3.8.49 OUTPUTLATCH Register (Offset = 60h) [Reset = 00000000h]

OUTPUTLATCH is shown in Figure 16-215 and described in Table 16-231.

Return to the Summary Table.

Output X-BAR Output Latch

Figure 16-215 OUTPUTLATCH Register
3130292827262524
RESERVED
R-0-0h
2322212019181716
RESERVED
R-0-0h
15141312111098
RESERVED
R-0-0h
76543210
OUTPUT8OUTPUT7OUTPUT6OUTPUT5OUTPUT4OUTPUT3OUTPUT2OUTPUT1
R-0hR-0hR-0hR-0hR-0hR-0hR-0hR-0h
Table 16-231 OUTPUTLATCH Register Field Descriptions
BitFieldTypeResetDescription
31-16RESERVEDR-00hReserved
15-8RESERVEDR-00hReserved
7OUTPUT8R0hRecords the OUTPUT8 of OUTPUT-XBAR.

0: Respective output has not been triggered
1: Respective output is triggered

Refer to the Output X-BAR section of this chapter for more details.

Note:
[1] setting of this bit has priority over clear by software

Reset type: CPU1.SYSRSn

6OUTPUT7R0hRecords the OUTPUT7 of OUTPUT-XBAR.

0: Respective output has not been triggered
1: Respective output is triggered

Refer to the Output X-BAR section of this chapter for more details.

Note:
[1] setting of this bit has priority over clear by software

Reset type: CPU1.SYSRSn

5OUTPUT6R0hRecords the OUTPUT6 of OUTPUT-XBAR.

0: Respective output has not been triggered
1: Respective output is triggered

Refer to the Output X-BAR section of this chapter for more details.

Note:
[1] setting of this bit has priority over clear by software

Reset type: CPU1.SYSRSn

4OUTPUT5R0hRecords the OUTPUT5 of OUTPUT-XBAR.

0: Respective output has not been triggered
1: Respective output is triggered

Refer to the Output X-BAR section of this chapter for more details.

Note:
[1] setting of this bit has priority over clear by software

Reset type: CPU1.SYSRSn

3OUTPUT4R0hRecords the OUTPUT4 of OUTPUT-XBAR.

0: Respective output has not been triggered
1: Respective output is triggered

Refer to the Output X-BAR section of this chapter for more details.

Note:
[1] setting of this bit has priority over clear by software

Reset type: CPU1.SYSRSn

2OUTPUT3R0hRecords the OUTPUT3 of OUTPUT-XBAR.

0: Respective output has not been triggered
1: Respective output is triggered

Refer to the Output X-BAR section of this chapter for more details.

Note:
[1] setting of this bit has priority over clear by software

Reset type: CPU1.SYSRSn

1OUTPUT2R0hRecords the OUTPUT2 of OUTPUT-XBAR.

0: Respective output has not been triggered
1: Respective output is triggered

Refer to the Output X-BAR section of this chapter for more details.

Note:
[1] setting of this bit has priority over clear by software

Reset type: CPU1.SYSRSn

0OUTPUT1R0hRecords the OUTPUT1 of OUTPUT-XBAR.

0: Respective output has not been triggered
1: Respective output is triggered

Refer to the Output X-BAR section of this chapter for more details.

Note:
[1] setting of this bit has priority over clear by software

Reset type: CPU1.SYSRSn

16.3.8.50 OUTPUTLATCHCLR Register (Offset = 62h) [Reset = 00000000h]

OUTPUTLATCHCLR is shown in Figure 16-216 and described in Table 16-232.

Return to the Summary Table.

Output X-BAR Output Latch Clear

Figure 16-216 OUTPUTLATCHCLR Register
3130292827262524
RESERVED
R-0-0h
2322212019181716
RESERVED
R-0-0h
15141312111098
RESERVED
R-0-0h
76543210
OUTPUT8OUTPUT7OUTPUT6OUTPUT5OUTPUT4OUTPUT3OUTPUT2OUTPUT1
R-0/W1S-0hR-0/W1S-0hR-0/W1S-0hR-0/W1S-0hR-0/W1S-0hR-0/W1S-0hR-0/W1S-0hR-0/W1S-0h
Table 16-232 OUTPUTLATCHCLR Register Field Descriptions
BitFieldTypeResetDescription
31-16RESERVEDR-00hReserved
15-8RESERVEDR-00hReserved
7OUTPUT8R-0/W1S0hClears the Output-Latch for OUTPUT8 of OUTPUT-XBAR

Writing 1 clears the corresponding output latch bit in the OUTPUTLATCH register
Write of 0 has no effect

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

6OUTPUT7R-0/W1S0hClears the Output-Latch for OUTPUT7 of OUTPUT-XBAR

Writing 1 clears the corresponding output latch bit in the OUTPUTLATCH register
Write of 0 has no effect

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5OUTPUT6R-0/W1S0hClears the Output-Latch for OUTPUT6 of OUTPUT-XBAR

Writing 1 clears the corresponding output latch bit in the OUTPUTLATCH register
Write of 0 has no effect

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

4OUTPUT5R-0/W1S0hClears the Output-Latch for OUTPUT5 of OUTPUT-XBAR

Writing 1 clears the corresponding output latch bit in the OUTPUTLATCH register
Write of 0 has no effect

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3OUTPUT4R-0/W1S0hClears the Output-Latch for OUTPUT4 of OUTPUT-XBAR

Writing 1 clears the corresponding output latch bit in the OUTPUTLATCH register
Write of 0 has no effect

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

2OUTPUT3R-0/W1S0hClears the Output-Latch for OUTPUT3 of OUTPUT-XBAR

Writing 1 clears the corresponding output latch bit in the OUTPUTLATCH register
Write of 0 has no effect

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1OUTPUT2R-0/W1S0hClears the Output-Latch for OUTPUT2 of OUTPUT-XBAR

Writing 1 clears the corresponding output latch bit in the OUTPUTLATCH register
Write of 0 has no effect

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

0OUTPUT1R-0/W1S0hClears the Output-Latch for OUTPUT1 of OUTPUT-XBAR

Writing 1 clears the corresponding output latch bit in the OUTPUTLATCH register
Write of 0 has no effect

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16.3.8.51 OUTPUTLATCHFRC Register (Offset = 64h) [Reset = 00000000h]

OUTPUTLATCHFRC is shown in Figure 16-217 and described in Table 16-233.

Return to the Summary Table.

Output X-BAR Output Latch Clear

Figure 16-217 OUTPUTLATCHFRC Register
3130292827262524
RESERVED
R-0-0h
2322212019181716
RESERVED
R-0-0h
15141312111098
RESERVED
R-0-0h
76543210
OUTPUT8OUTPUT7OUTPUT6OUTPUT5OUTPUT4OUTPUT3OUTPUT2OUTPUT1
R-0/W1S-0hR-0/W1S-0hR-0/W1S-0hR-0/W1S-0hR-0/W1S-0hR-0/W1S-0hR-0/W1S-0hR-0/W1S-0h
Table 16-233 OUTPUTLATCHFRC Register Field Descriptions
BitFieldTypeResetDescription
31-16RESERVEDR-00hReserved
15-8RESERVEDR-00hReserved
7OUTPUT8R-0/W1S0hSets the Output-Latch for OUTPUT8 of OUTPUT-XBAR

Writing 1 sets the corresponding output latch bit in the OUTPUTLATCH register
Write of 0 has no effect

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

6OUTPUT7R-0/W1S0hSets the Output-Latch for OUTPUT7 of OUTPUT-XBAR

Writing 1 sets the corresponding output latch bit in the OUTPUTLATCH register
Write of 0 has no effect

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5OUTPUT6R-0/W1S0hSets the Output-Latch for OUTPUT6 of OUTPUT-XBAR

Writing 1 sets the corresponding output latch bit in the OUTPUTLATCH register
Write of 0 has no effect

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

4OUTPUT5R-0/W1S0hSets the Output-Latch for OUTPUT5 of OUTPUT-XBAR

Writing 1 sets the corresponding output latch bit in the OUTPUTLATCH register
Write of 0 has no effect

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3OUTPUT4R-0/W1S0hSets the Output-Latch for OUTPUT4 of OUTPUT-XBAR

Writing 1 sets the corresponding output latch bit in the OUTPUTLATCH register
Write of 0 has no effect

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

2OUTPUT3R-0/W1S0hSets the Output-Latch for OUTPUT3 of OUTPUT-XBAR

Writing 1 sets the corresponding output latch bit in the OUTPUTLATCH register
Write of 0 has no effect

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1OUTPUT2R-0/W1S0hSets the Output-Latch for OUTPUT2 of OUTPUT-XBAR

Writing 1 sets the corresponding output latch bit in the OUTPUTLATCH register
Write of 0 has no effect

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

0OUTPUT1R-0/W1S0hSets the Output-Latch for OUTPUT1 of OUTPUT-XBAR

Writing 1 sets the corresponding output latch bit in the OUTPUTLATCH register
Write of 0 has no effect

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16.3.8.52 OUTPUTLATCHENABLE Register (Offset = 66h) [Reset = 00000000h]

OUTPUTLATCHENABLE is shown in Figure 16-218 and described in Table 16-234.

Return to the Summary Table.

Output X-BAR Output Latch Enable

Figure 16-218 OUTPUTLATCHENABLE Register
3130292827262524
RESERVED
R-0-0h
2322212019181716
RESERVED
R-0-0h
15141312111098
RESERVED
R-0-0h
76543210
OUTPUT8OUTPUT7OUTPUT6OUTPUT5OUTPUT4OUTPUT3OUTPUT2OUTPUT1
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 16-234 OUTPUTLATCHENABLE Register Field Descriptions
BitFieldTypeResetDescription
31-16RESERVEDR-00hReserved
15-8RESERVEDR-00hReserved
7OUTPUT8R/W0hSelects the output latch to drive OUTPUT8 for OUTPUT-XBAR

0: Output Latch is not selected to driven the respective output
1: Output Latch is selected to drive the respective output

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

6OUTPUT7R/W0hSelects the output latch to drive OUTPUT7 for OUTPUT-XBAR

0: Output Latch is not selected to driven the respective output
1: Output Latch is selected to drive the respective output

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5OUTPUT6R/W0hSelects the output latch to drive OUTPUT6 for OUTPUT-XBAR

0: Output Latch is not selected to driven the respective output
1: Output Latch is selected to drive the respective output

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

4OUTPUT5R/W0hSelects the output latch to drive OUTPUT5 for OUTPUT-XBAR

0: Output Latch is not selected to driven the respective output
1: Output Latch is selected to drive the respective output

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3OUTPUT4R/W0hSelects the output latch to drive OUTPUT4 for OUTPUT-XBAR

0: Output Latch is not selected to driven the respective output
1: Output Latch is selected to drive the respective output

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

2OUTPUT3R/W0hSelects the output latch to drive OUTPUT3 for OUTPUT-XBAR

0: Output Latch is not selected to driven the respective output
1: Output Latch is selected to drive the respective output

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1OUTPUT2R/W0hSelects the output latch to drive OUTPUT2 for OUTPUT-XBAR

0: Output Latch is not selected to driven the respective output
1: Output Latch is selected to drive the respective output

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

0OUTPUT1R/W0hSelects the output latch to drive OUTPUT1 for OUTPUT-XBAR

0: Output Latch is not selected to driven the respective output
1: Output Latch is selected to drive the respective output

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16.3.8.53 OUTPUTINV Register (Offset = 68h) [Reset = 00000000h]

OUTPUTINV is shown in Figure 16-219 and described in Table 16-235.

Return to the Summary Table.

Output X-BAR Output Inversion

Figure 16-219 OUTPUTINV Register
3130292827262524
RESERVED
R-0-0h
2322212019181716
RESERVED
R-0-0h
15141312111098
RESERVED
R-0-0h
76543210
OUTPUT8OUTPUT7OUTPUT6OUTPUT5OUTPUT4OUTPUT3OUTPUT2OUTPUT1
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 16-235 OUTPUTINV Register Field Descriptions
BitFieldTypeResetDescription
31-16RESERVEDR-00hReserved
15-8RESERVEDR-00hReserved
7OUTPUT8R/W0hSelects polarity for OUTPUT8 of OUTPUT-XBAR

0: drives active high output
1: drives active-low output

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

6OUTPUT7R/W0hSelects polarity for OUTPUT7 of OUTPUT-XBAR

0: drives active high output
1: drives active-low output

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5OUTPUT6R/W0hSelects polarity for OUTPUT6 of OUTPUT-XBAR

0: drives active high output
1: drives active-low output

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

4OUTPUT5R/W0hSelects polarity for OUTPUT5 of OUTPUT-XBAR

0: drives active high output
1: drives active-low output

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3OUTPUT4R/W0hSelects polarity for OUTPUT4 of OUTPUT-XBAR

0: drives active high output
1: drives active-low output

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

2OUTPUT3R/W0hSelects polarity for OUTPUT3 of OUTPUT-XBAR

0: drives active high output
1: drives active-low output

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1OUTPUT2R/W0hSelects polarity for OUTPUT2 of OUTPUT-XBAR

0: drives active high output
1: drives active-low output

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

0OUTPUT1R/W0hSelects polarity for OUTPUT1 of OUTPUT-XBAR

0: drives active high output
1: drives active-low output

Refer to the Output X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16.3.8.54 OUTPUTLOCK Register (Offset = 6Eh) [Reset = 00000000h]

OUTPUTLOCK is shown in Figure 16-220 and described in Table 16-236.

Return to the Summary Table.

Output X-BAR Configuration Lock register

Figure 16-220 OUTPUTLOCK Register
3130292827262524
KEY
R-0/W1S-0h
2322212019181716
KEY
R-0/W1S-0h
15141312111098
RESERVED
R-0-0h
76543210
RESERVEDLOCK
R-0-0hR/WSonce-0h
Table 16-236 OUTPUTLOCK Register Field Descriptions
BitFieldTypeResetDescription
31-16KEYR-0/W1S0hBit-0 of this register can be set only if KEY= 0x5a5a

Reset type: CPU1.SYSRSn

15-1RESERVEDR-00hReserved
0LOCKR/WSonce0hLocks the configuration for OUTPUT-XBAR. Once the configuration is locked, writes to the below registers for OUTPUT-XBAR is blocked.

Registers Affected by the LOCK mechanism:
OUTPUT-XBAROUTyMUX0TO15CFG
OUTPUT-XBAROUTyMUX16TO31CFG
OUTPUT-XBAROUTyMUXENABLE
OUTPUT-XBAROUTLATENABLE
OUTPUT-XBAROUTINV

0: Writes to the above registers are allowed
1: Writes to the above registers are blocked

Note:
[1] LOCK mechanism only apples to writes. Reads are never blocked.

Reset type: CPU1.SYSRSn