SBASAX4 June   2026 ADS9316 , ADS9317

PRODUCTION DATA  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Pin Configuration and Functions
  6. 5 Specifications
    1. 5.1  Absolute Maximum Ratings
    2. 5.2  ESD Ratings
    3. 5.3  Thermal Information
    4. 5.4  Recommended Operating Conditions
    5. 5.5  Electrical Characteristics 
    6. 5.6  Electrical Characteristics: AVDD = 5V
    7. 5.7  Electrical Characteristics: AVDD = 3.3V
    8. 5.8  Timing Requirements
    9. 5.9  Switching Characteristics
    10. 5.10 Timing Diagrams
    11. 5.11 Typical Characteristics
  7. 6 Detailed Description
    1. 6.1 Overview
    2. 6.2 Functional Block Diagram
    3. 6.3 Feature Description
      1. 6.3.1 Analog Inputs
      2. 6.3.2 Reference
        1. 6.3.2.1 Internal Reference
          1. 6.3.2.1.1 Selectable Internal Reference with 5V AVDD
        2. 6.3.2.2 External Reference
        3. 6.3.2.3 External Reference With External Reference Buffer
      3. 6.3.3 Burst Sample Operation
      4. 6.3.4 ADC Transfer Function
      5. 6.3.5 Programmable Data Averaging Filter
        1. 6.3.5.1 Simple Average
          1. 6.3.5.1.1 Simple Average with Noncontinuous CONVST
        2. 6.3.5.2 Moving Average
      6. 6.3.6 Channel Averaging
      7. 6.3.7 Common-Mode Voltage Output
      8. 6.3.8 ADC Output Data Randomizer
    4. 6.4 Device Functional Modes
      1. 6.4.1 Reset
      2. 6.4.2 Normal Operation
      3. 6.4.3 Low-Latency Mode
      4. 6.4.4 CS-CONVST Short Mode
      5. 6.4.5 Register Read Mode
      6. 6.4.6 Initialization Sequence
    5. 6.5 Programming
      1. 6.5.1  Data Interface
      2. 6.5.2  Data Frame Width
      3. 6.5.3  SPI Modes
      4. 6.5.4  CONVST Inversion
      5. 6.5.5  SCLK Echo Mode
      6. 6.5.6  Daisy-Chain Mode
      7. 6.5.7  SPI Frame Length for Register Operations
      8. 6.5.8  Register Map Lock
      9. 6.5.9  Register Write
      10. 6.5.10 Register Read
  8. 7 Register Map
    1. 7.1 Register Bank 0
    2. 7.2 Register Bank 1
  9. 8 Application and Implementation
    1. 8.1 Application Information
    2. 8.2 Typical Application
      1. 8.2.1 Analog 1VPP Sine-Cosine Encoder Interface
      2. 8.2.2 Design Requirements
      3. 8.2.3 Detailed Design Procedure
    3. 8.3 Power Supply Recommendations
    4. 8.4 Layout
      1. 8.4.1 Layout Guidelines
      2. 8.4.2 Layout Example
  10. 9 Revision History
  11. 10Device and Documentation Support
    1. 10.1 Documentation Support
      1. 10.1.1 Related Documentation
    2. 10.2 Receiving Notification of Documentation Updates
    3. 10.3 Support Resources
    4. 10.4 Trademarks
    5. 10.5 Electrostatic Discharge Caution
    6. 10.6 Glossary
  12. 11Mechanical, Packaging, and Orderable Information
    1. 11.1 Mechanical Data

6.3.6 Channel Averaging

The ADS931x supports channel averaging to create a lower noise output from the original channel data. When channel averaging is enabled, the ADC data output width does not change. In typical use, the signal is applied in parallel to both channels of the device as shown in Figure 6-17. To enable channel averaging, write 1b to CH_AVERAGE in address 0x0D. When enabled, the data output is the average of channel A and channel B. The device output on the data interface corresponding to channel A is identical to the data corresponding to channel B. Either channel A or channel B data can be used to evaluate the conversion result.


ADS9316 ADS9317 Channel Averaging Hardware Connection

Figure 6-17 Channel Averaging Hardware Connection