SLAU858B December   2023  – June 2025 AFE881H1

 

  1.   1
  2.   Description
  3.   Features
  4.   4
  5. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
  6. 2Hardware
    1. 2.1 Hardware Description
      1. 2.1.1 Theory of Operation
      2. 2.1.2 Signal Definitions
    2. 2.2 Hardware Setup
      1. 2.2.1 Electrostatic Discharge Caution
      2. 2.2.2 Power Configuration and Jumper Settings
      3. 2.2.3 Connecting the Hardware
        1. 2.2.3.1 Power Configuration
        2. 2.2.3.2 External SPI and UART Controllers
  7. 3Software
    1. 3.1 Software Setup
    2. 3.2 Software Description
      1. 3.2.1 Starting the Software
      2. 3.2.2 Software Features
        1. 3.2.2.1 High Level Configuration Page
        2. 3.2.2.2 AFE881H1 Register Page
  8. 4Hardware Design Files
    1. 4.1 Board Schematic
    2. 4.2 PCB Layout
    3. 4.3 Bill of Materials
  9. 5Additional Information
    1. 5.1 Trademarks
  10. 6Related Documentation
  11. 7Revision History

Related Documentation

The documents in Table 6-1 provides information regarding Texas Instruments integrated circuits used in the assembly of the AFE881H1EVM. This user's guide is available from the TI web site under literature number SLAU858. Any letter appended to the literature number corresponds to the document revision that is current at the time of the writing of this document. Newer revisions are available from the TI web site at www.ti.com, or call the Texas Instruments Literature Response Center at (800) 477-8924 or the Product Information Center at (972) 644-5580. When ordering, identify the document by both title and literature number.

Table 6-1 Related Documentation
Document Literature Number
AFE881H1 product data sheet SLASEU7
TPS72118 product data sheet SLVS352
TPS73433 product data sheet SBVS089
TXU0202 product data sheet SCES942
TXU0204 product data sheet SCES936
TXU0304 product data sheet SCES935