SLUSG46 March 2026 BQ25785
PRODUCTION DATA
When both VBUS and VBAT exist, setting EN_LEARN=1b to enable learn mode to allow the device to shut off the converter and discharge battery to support the system. In this way, the device can calibrate the battery gas gauge over a complete discharge and charge cycle. When the battery voltage is below the battery depletion threshold, the EC host sets EN_LEARN bit back to 0b to switch the device back in forward mode. When device is under learn mode if CELL_BATPRES pin is pulled lower than VCELL_BATPRES_FALL for 1ms deglitch time, then the device exits LEARN mode and resets the EN_LEARN bit back to 0 automatically.