SLVSKW2 January   2026 ADS1278QML-SP

PRODUCTION DATA  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Pin Configuration and Functions
  6. 5 Specifications
    1. 5.1 Absolute Maximum Ratings
    2. 5.2 ESD Ratings
    3. 5.3 Recommended Operating Conditions
    4. 5.4 Thermal Information
    5. 5.5 Electrical Characteristics
    6. 5.6 Quality Conformance Inspection
    7. 5.7 Timing Requirements: SPI Format
    8. 5.8 Timing Requirements: Frame-Sync Format
    9. 5.9 Typical Characteristics
  7. 6 Detailed Description
    1. 6.1 Overview
    2. 6.2 Functional Block Diagram
    3. 6.3 Feature Description
      1. 6.3.1  Sampling Aperture Matching
      2. 6.3.2  Frequency Response
        1. 6.3.2.1 High-Speed, Low-Power, And Low-Speed Modes
        2. 6.3.2.2 High-Resolution Mode
      3. 6.3.3  Phase Response
      4. 6.3.4  Settling Time
      5. 6.3.5  Data Format
      6. 6.3.6  Analog Inputs (AINP, AINN)
      7. 6.3.7  Voltage Reference Inputs (VREFP, VREFN)
      8. 6.3.8  Clock Input (CLK)
      9. 6.3.9  Mode Selection (MODE)
      10. 6.3.10 Synchronization (SYNC)
      11. 6.3.11 Power-Down ( PWDN)
      12. 6.3.12 Format[2:0]
      13. 6.3.13 Serial Interface Protocols
      14. 6.3.14 SPI Serial Interface
        1. 6.3.14.1 SCLK
        2. 6.3.14.2 DRDY/FSYNC (SPI Format)
        3. 6.3.14.3 DOUT
        4. 6.3.14.4 DIN
      15. 6.3.15 Frame-Sync Serial Interface
        1. 6.3.15.1 SCLK
        2. 6.3.15.2 DRDY/FSYNC (Frame-Sync Format)
        3. 6.3.15.3 DOUT
        4. 6.3.15.4 DIN
      16. 6.3.16 DOUT Modes
        1. 6.3.16.1 TDM Mode
        2. 6.3.16.2 TDM Mode, Fixed-Position Data
        3. 6.3.16.3 TDM Mode, Dynamic Position Data
        4. 6.3.16.4 Discrete Data Output Mode
      17. 6.3.17 Daisy-Chaining
      18. 6.3.18 Modulator Output
      19. 6.3.19 Pin Test Using Test[1:0] Inputs
      20. 6.3.20 VCOM Output
    4. 6.4 Device Functional Modes
  8. 7 Application and Implementation
    1. 7.1 Application Information
    2. 7.2 Typical Application
      1. 7.2.1 Design Requirements
      2. 7.2.2 Detailed Design Procedure
      3. 7.2.3 Application Curve
    3. 7.3 Power Supply Recommendations
    4. 7.4 Layout
      1. 7.4.1 Layout Guidelines
      2. 7.4.2 Layout Example
  9. 8 Device and Documentation Support
    1. 8.1 Receiving Notification of Documentation Updates
    2. 8.2 Community Resources
    3. 8.3 Trademarks
  10. 9 Revision History
  11. 10Mechanical, Packaging, and Orderable Information

6.3.14.2 DRDY/FSYNC (SPI Format)

In the SPI format, this pin functions as the DRDY output. The pin goes low when data are ready for retrieval and then returns high on the falling edge of the first subsequent SCLK. If data are not retrieved (that is, SCLK is held low), DRDY pulses high just before the next conversion data are ready, as shown in Figure 6-19. The new data are loaded within one CLK cycle before DRDY goes low. All data must be shifted out before this time to avoid being overwritten.

ADS1278QML-SP DRDY Timing With No ReadbackFigure 6-19 DRDY Timing With No Readback