SLVUCU5 December 2025 UCD91160 , UCD91320
UCD91xxx provides a System Watchdog timer (WDT), which can be reset by toggling a watchdog input (WDI) pin. If WDI is not toggled within a programmed period, the WDT times out. As a result, a watchdog output (WDO) pin is asserted (generates a pulse) to provide a system reset signal.
The WDI and WDO pins are GPIO pins and are optional.
WDI can be replaced by PMBus command SYSTEM_WATCHDOG_RESET.
WDO can be manifested through LGPO, or its function can be integrated into the System Reset pin (RESET) configured by the System Reset function. See the System Reset for more details.
After a timeout, the WDT can be restarted by toggling the WDI pin or by sending SYSTEM_WATCHDOG_RESET.
The System Watchdog timer can be immediately active at device power-up or after an initial wait time. See SYSTEM_WATCHDOG_CONFIG for configuration details.