SLVUCU5 December 2025 UCD91160 , UCD91320
This R/W Block paged command selects the index of the rail profile that will be used for later VOUT_COMMAND, VOUT_OV_FAULT_LIMIT, VOUT_OV_WARNING_LIMIT, VOUT_MARGIN_HIGH, POWER_GOOD_ON, VOUT_MARGIN_LOW, POWER_GOOD_OFF, VOUT_UV_WARNING_LIMIT and VOUT_UV_FAULT_LIMIT commands. GPIs must assigned to switch the profile based on it asserted/deasserted state.
| Byte Number (Write) | Byte Number (Read) | Payload Index | Description |
|---|---|---|---|
| 0 | CMD = B8 | ||
| 1 | 0 | BYTE_COUNT = 2 | |
| 2 | 1 | 0 | Number Profile |
3 | 2 | 1 | Profile Index |
Bit Description: [7:4]
[3:0]
|