SLVUCU5 December 2025 UCD91160 , UCD91320
This command is added in PMBUS specification 1.2 and is described in section 15.38. It is used to block a status bits from causing the SMBALERT# signal to be asserted. Refer to PMBUS specification document for format details. This command has to be used together with status command codes to write or read the mask of a specific status bit. The status command codes that can be used with this command include:
Another status command code, MFR_STATUS, also needs to work with the SMBALERT_MASK command. However, SMBALERT_MASK can only write/read one byte mask at a time. Since MFR_STATUS contains 48 bits, it is split into 6 sub-commands to work with the SMBALERT_MASK command:
MFR_STATUS_5: for MFR_STATUS bit 47 to 40