SNVU932A March   2025  – August 2025 LP5814 , LP5814I , LP5815

 

  1.   1
  2.   Description
  3.   Get Started
  4.   Features
  5.   Applications
  6.   6
  7. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Device Information
  8. 2Hardware
    1. 2.1 Setup
    2. 2.2 Jumper Information
  9. 3Software
    1. 3.1 Software Description
    2. 3.2 Graphical User Interface (GUI) Installation
    3. 3.3 Graphical User Interface (GUI) Guidance
      1. 3.3.1 Hardware Connection
      2. 3.3.2 Start Page
      3. 3.3.3 Hardware Setup Page
      4. 3.3.4 Home Page
      5. 3.3.5 LED Control Page
        1. 3.3.5.1 Turn ON LED in Manual Mode
        2. 3.3.5.2 Turn On LED in Autonomous Mode
      6. 3.3.6 Enter and Exit Shutdown Mode
      7. 3.3.7 Read Flags
  10. 4Hardware Design Files
    1. 4.1 Schematics
    2. 4.2 PCB Layouts
    3. 4.3 Bill of Materials (BOM)
  11. 5Additional Information
    1. 5.1 Trademarks
  12. 6Revision History

3.3.3 Hardware Setup Page

There are two tabs shown on the Figure 3-7.

  • Connect the EVM to Your PC shows the cable connections between computer and USB2ANY tool and the EVM.

  • Connect the Jumpers shows the default jumpers setting for the EVM.

Click FINISH to jump to the Home Page.

LP5814DRLEVM, LP5815DRLEVM, LP5814YCHEVM and LP5815YCHEVM Hardware Setup Page Figure 3-7 Hardware Setup Page