INA129

AKTIV

Präzise, energieeffiziente Instrumentenverstärker

Jetzt bestellen

Datenblatt

document-pdfAcrobat INA12x Precision, Low-Power Instrumentation Amplifiers datasheet (Rev. G) (Englisch) PDF | HTML

INA129

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Number of channels

1

Vs (max) (V)

36

Vs (min) (V)

4.5

Input offset (±) (max) (µV)

50

Voltage gain (min) (V/V)

1

Voltage gain (max) (V/V)

10000

Noise at 1 kHz (typ) (nV√Hz)

8

Features

Current Feedback, Overvoltage protection

CMRR (min) (dB)

120

Input offset drift (±) (max) (µV/°C)

0.5

Input bias current (±) (max) (nA)

5

Iq (typ) (mA)

0.7

Bandwidth at min gain (typ) (MHz)

1.3

Gain error (±) (max) (%)

0.5

Operating temperature range (°C)

-40 to 125

Rating

Catalog

Type

Resistor

Gain nonlinearity (±) (max) (%)

0.002

Output swing headroom (to negative supply) (typ) (V)

0.8

Output swing headroom (to positive supply) (typ) (V)

-0.9

Input common mode headroom (to negative supply) (typ) (V)

1.7

Input common mode headroom (to positive supply) (typ) (V)

-1.4

Noise at 0.1 Hz to 10 Hz (typ) (µVPP)

0.2

Number of channels

1

Vs (max) (V)

36

Vs (min) (V)

4.5

Input offset (±) (max) (µV)

50

Voltage gain (min) (V/V)

1

Voltage gain (max) (V/V)

10000

Noise at 1 kHz (typ) (nV√Hz)

8

Features

Current Feedback, Overvoltage protection

CMRR (min) (dB)

120

Input offset drift (±) (max) (µV/°C)

0.5

Input bias current (±) (max) (nA)

5

Iq (typ) (mA)

0.7

Bandwidth at min gain (typ) (MHz)

1.3

Gain error (±) (max) (%)

0.5

Operating temperature range (°C)

-40 to 125

Rating

Catalog

Type

Resistor

Gain nonlinearity (±) (max) (%)

0.002

Output swing headroom (to negative supply) (typ) (V)

0.8

Output swing headroom (to positive supply) (typ) (V)

-0.9

Input common mode headroom (to negative supply) (typ) (V)

1.7

Input common mode headroom (to positive supply) (typ) (V)

-1.4

Noise at 0.1 Hz to 10 Hz (typ) (µVPP)

0.2

SOIC (D)

8

29.4 mm² (4.9 mm × 6 mm)

PDIP (P)

8

92.5083 mm² (9.81 mm × 9.43 mm)

Low offset voltage: 50µV, maximum
Low drift: 0.5µV/°C, maximum
Low input bias current:
- 5nA, maximum (CSO: SHE)
- 0.7nA, maximum (CSO: FRE)
Low noise: 8nV/√Hz, 0.2µVpp
High CMR: 120dB, minimum
Bandwidth: 1.3MHz (G = 1)
Inputs protected to ±40V
Wide supply range: ±2.25V to ±18V
Low quiescent current: 700µA
Packages: 8-pin plastic DIP, SO-8

Low offset voltage: 50µV, maximum
Low drift: 0.5µV/°C, maximum
Low input bias current:
- 5nA, maximum (CSO: SHE)
- 0.7nA, maximum (CSO: FRE)
Low noise: 8nV/√Hz, 0.2µVpp
High CMR: 120dB, minimum
Bandwidth: 1.3MHz (G = 1)
Inputs protected to ±40V
Wide supply range: ±2.25V to ±18V
Low quiescent current: 700µA
Packages: 8-pin plastic DIP, SO-8

The INA128 and INA129 (INA12x) are low-power, general-purpose instrumentation amplifiers that offer excellent accuracy. The versatile three op amp design and small size make these amplifiers an excellent choice for a wide range of applications. Current-feedback input circuitry provides wide bandwidth even at high gain (200kHz at G = 100).

A single external resistor sets any gain from 1 to 10,000. The INA128 provides an industry-standard gain equation with a 50kΩ resistor. The INA129 gain equation uses a 49.4kΩ resistor to allow for drop-in replacements of comparable devices.

The INA12x are available in plastic DIP and surface-mount packages, specified for the –40°C to +85°C temperature range. The INA128 is also available in a dual configuration, the INA2128.

The upgraded INA828 offers a lower input bias current (0.6nA, maximum) and lower noise (7nV/√Hz) at the same quiescent current. See the Device Comparison Table for a selection of precision instrumentation amplifiers from Texas Instruments.

The INA128 and INA129 (INA12x) are low-power, general-purpose instrumentation amplifiers that offer excellent accuracy. The versatile three op amp design and small size make these amplifiers an excellent choice for a wide range of applications. Current-feedback input circuitry provides wide bandwidth even at high gain (200kHz at G = 100).

A single external resistor sets any gain from 1 to 10,000. The INA128 provides an industry-standard gain equation with a 50kΩ resistor. The INA129 gain equation uses a 49.4kΩ resistor to allow for drop-in replacements of comparable devices.

The INA12x are available in plastic DIP and surface-mount packages, specified for the –40°C to +85°C temperature range. The INA128 is also available in a dual configuration, the INA2128.

The upgraded INA828 offers a lower input bias current (0.6nA, maximum) and lower noise (7nV/√Hz) at the same quiescent current. See the Device Comparison Table for a selection of precision instrumentation amplifiers from Texas Instruments.

filter

Andere Instrumentenverstärker suchen

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 3

Top-Dokumentation	Typ	Titel	Format-Optionen	Datum
*	Datenblatt	INA12x Precision, Low-Power Instrumentation Amplifiers datasheet (Rev. G)	PDF \| HTML	16.01.2026
	Anwendungshinweis	Importance of Input Bias Current Return Paths in Instrumentation Amplifier Apps	PDF \| HTML	27.07.2021
	E-book	The Signal e-book: A compendium of blog posts on op amp design topics	PDF \| HTML	28.03.2017

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

INAEVM — Universal-Instrumenten-Verstärker – Evaluierungsmodul

The universal INAEVM (Instrumentation Amplifier Evaluation Module) is available in two package options that simplify prototyping precision instrumentation amplifiers in either the SO-8 (D) package or the MSOP-8(DGK) package with the pinout shown. See the chart in the user guide (...)

Benutzerhandbuch: PDF | HTML