Home Schnittstelle IO-Link und Digital-E/A
Home
Schnittstelle
IO-Link und Digital-E/A
NEU

TIOM2212

VORSCHAU
Jetzt bestellen
Datenblatt

TIOM2212

VORSCHAU
Datenblatt Jetzt bestellen

Produktdetails

Type IO-Link Current limit (max) (A) 0.7 Features Configurable current limiter, Dual Channel, Low residual voltage, Remote wakeup, Reverse polarity protection Operating temperature range (°C) -40 to 125
Type IO-Link Current limit (max) (A) 0.7 Features Configurable current limiter, Dual Channel, Low residual voltage, Remote wakeup, Reverse polarity protection Operating temperature range (°C) -40 to 125
VQFN (RGZ) 48 49 mm² (7 mm × 7 mm)
  • Two independent IO-Link PHY channels
    • High performance C/Q driver: 1Ω RDS(on), up to 700mA DC
    • Configurable PNP, NPN, push-pull, or IO-Link 1.1.5 compliant output supporting IEC 61131-9 COM1, COM2, and COM3
  • Integrated IO-Link frame handler simplifies board level signal routing, reducing need for UART
    • Offloads protocol-related processing from the microcontroller/processor
    • Supports up to 25MHz high-speed SPI with optional UART support
      • 1.8V to 5.5V I/O compatibility
    • Integrated diagnostics: overtemperature, overvoltage and undervoltage, C/Q & L+ overcurrent, reverse polarity
    • Hardware interrupt and reset pins
    • Integrated wake-up pulse generation and communication sequencer
    • Ready pulse detection for OSSDe compatibility
  • Integrated gate drivers for external NFETs supporting both L+ and C/Q
    • Capable of driving >4A NFETs for actuator support
    • Capable of L+ and C/Q current sense feedback to external ADC
  • Two outputs configurable to IEC61131-2 digital input channels (type 1 or type 3)
  • Robust protection on all interface pins (C/Q, DI, L+, VCC, S, G, C/QG, C/QS)
    • ±65V DC protection and ±70V transient protection
    • Reverse polarity protection (C/Q and L+)
    • Reverse current blocking (C/Q and L+)
  • 12 LED register controlled PWM drivers (6 per channel)
  • Two independent IO-Link PHY channels
    • High performance C/Q driver: 1Ω RDS(on), up to 700mA DC
    • Configurable PNP, NPN, push-pull, or IO-Link 1.1.5 compliant output supporting IEC 61131-9 COM1, COM2, and COM3
  • Integrated IO-Link frame handler simplifies board level signal routing, reducing need for UART
    • Offloads protocol-related processing from the microcontroller/processor
    • Supports up to 25MHz high-speed SPI with optional UART support
      • 1.8V to 5.5V I/O compatibility
    • Integrated diagnostics: overtemperature, overvoltage and undervoltage, C/Q & L+ overcurrent, reverse polarity
    • Hardware interrupt and reset pins
    • Integrated wake-up pulse generation and communication sequencer
    • Ready pulse detection for OSSDe compatibility
  • Integrated gate drivers for external NFETs supporting both L+ and C/Q
    • Capable of driving >4A NFETs for actuator support
    • Capable of L+ and C/Q current sense feedback to external ADC
  • Two outputs configurable to IEC61131-2 digital input channels (type 1 or type 3)
  • Robust protection on all interface pins (C/Q, DI, L+, VCC, S, G, C/QG, C/QS)
    • ±65V DC protection and ±70V transient protection
    • Reverse polarity protection (C/Q and L+)
    • Reverse current blocking (C/Q and L+)
  • 12 LED register controlled PWM drivers (6 per channel)

The TIOM2212 dual channel IO-Link controller implements two independent IO-Link interfaces for industrial bidirectional, point-to-point communication with an integrated frame handler. The device can be connected to two IO-Link devices through a three-wire interface and integrates automatic wake-up pulse generation, communication sequencer, and ready pulse detection for simplified communication with IO-Link devices. The integrated frame handlers can be controlled via SPI, eliminating the need for external UARTs, but for legacy systems or non-standard frame sizes, a UART interface is available for maximum flexibility.

The TIOM2212 is designed to provide high flexibility and system-level integration for industrial automation. This device supports advanced status indications with integrated LED drivers, external NFET gate drivers for high-power L+ supply and C/Q device actuation, and configurable digital features for port synchronization and system monitoring. The device architecture also enables efficeint, high-speed SPI communication for rapid data updates and maximum system integration.

The TIOM2212 dual channel IO-Link controller implements two independent IO-Link interfaces for industrial bidirectional, point-to-point communication with an integrated frame handler. The device can be connected to two IO-Link devices through a three-wire interface and integrates automatic wake-up pulse generation, communication sequencer, and ready pulse detection for simplified communication with IO-Link devices. The integrated frame handlers can be controlled via SPI, eliminating the need for external UARTs, but for legacy systems or non-standard frame sizes, a UART interface is available for maximum flexibility.

The TIOM2212 is designed to provide high flexibility and system-level integration for industrial automation. This device supports advanced status indications with integrated LED drivers, external NFET gate drivers for high-power L+ supply and C/Q device actuation, and configurable digital features for port synchronization and system monitoring. The device architecture also enables efficeint, high-speed SPI communication for rapid data updates and maximum system integration.
filter Andere IO-Link und Digital-E/A suchen
Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 1
Top-Dokumentation Typ Titel Format-Optionen Neueste englische Version herunterladen Datum
* Datenblatt TIOM2212 Dual Channel IO-Link Master With Integrated Frame Handler, Supply Controller and Diagnostics datasheet PDF | HTML 05.10.2026

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

TIOL221EVM — TIOL221 – Evaluierungsmodul

Das TIOL221-Evaluierungsmodul (EVM) ist eine Plattform zum Evaluieren der Hauptfunktionen und der Leistung des TIOL221, sowohl in der Pin-Contol- als auch in der SPI-Konfiguration. Das EVM enthält einen vierpoligen M12-Anschluss gemäß Industriestandard mit einer Zweikanalkonfiguration der Klasse A (...)
Benutzerhandbuch: PDF | HTML
Unterstützte Produkte und Hardware
Vorrätig
Limit:
??asset.out-of-stock-ti_de_DE??
Nicht verfügbar
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
VQFN (RGZ) 48 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos