TMS320F28044

AKTIV

Produktdetails

CPU 1 C28 Frequency (MHz) 100 Flash memory (kByte) 128 RAM (kByte) 20 ADC type 12-bit Total processing (MIPS) 100 Features 32-bit CPU timers, Single zone code security, Watchdog timer UART 1 CAN (#) 0 Sigma-delta filter 0 PWM (Ch) 16 Security Secure storage Number of ADC channels 16 Direct memory access (Ch) 0 SPI 1 QEP 1 USB No Hardware accelerators CPU only Edge AI enabled Yes Operating temperature range (°C) -40 to 85 Rating Catalog Communication interface I2C, SCI, SPI Operating system BareMetal (No OS), FreeRTOS, SafeRTOS Nonvolatile memory (kByte) 128 Number of GPIOs 35 Number of I2Cs 1
CPU 1 C28 Frequency (MHz) 100 Flash memory (kByte) 128 RAM (kByte) 20 ADC type 12-bit Total processing (MIPS) 100 Features 32-bit CPU timers, Single zone code security, Watchdog timer UART 1 CAN (#) 0 Sigma-delta filter 0 PWM (Ch) 16 Security Secure storage Number of ADC channels 16 Direct memory access (Ch) 0 SPI 1 QEP 1 USB No Hardware accelerators CPU only Edge AI enabled Yes Operating temperature range (°C) -40 to 85 Rating Catalog Communication interface I2C, SCI, SPI Operating system BareMetal (No OS), FreeRTOS, SafeRTOS Nonvolatile memory (kByte) 128 Number of GPIOs 35 Number of I2Cs 1
LQFP (PZ) 100 256 mm² (16 mm × 16 mm)
  • High-performance 100-MHz (10-ns cycle time) processor
  • TMS320C28x 32-bit CPU
    • Single-cycle 16 × 16 and 32 × 32 multiply-accumulate (MAC) operations
    • Dual 16 × 16 MAC
    • Fast interrupt response
    • Unified memory programming model
  • On-chip memory
    • 64K × 16 flash
    • 10K × 16 SARAM
    • 1K × 16 OTP
    • 4K × 16 Boot ROM
    • Code Security Module protects against unauthorized memory access
  • Clocking
    • On-chip oscillator
    • Clock-Fail-Detect mode
  • Interrupts
    • Support for up to three external core interrupts
    • Peripheral Interrupt Expansion (PIE) block that supports all peripheral interrupts
  • High-speed, 12-bit ADC
    • 80-ns (12.5-MSPS) conversion rate
    • 16 channels
    • Two sample-and-hold
    • Single/simultaneous conversions
    • Internal or external reference
  • High-resolution PWM
    • 16 outputs with 150-ps resolution
    • 14.8 bits at 200-kHz switching
    • 13.4 bits at 500-kHz switching
    • 12.4 bits at 1-MHz switching
  • Endianness: Little endian
  • Communications port peripherals
    • Serial Peripheral Interface (SPI) module
    • Serial Communications Interface (SCI)
    • Inter-Integrated Circuit (I2C) bus
  • Timers
    • Three 32-bit CPU timers
    • Up to 16 16-bit timers
    • Watchdog Timer module
  • Up to 35 General-Purpose Input/Output (GPIO) pins with input filtering
  • On-chip JTAG emulation with real-time debug via hardware
  • JTAG boundary scan support
    • IEEE Standard 1149.1-1990 Standard Test Access Port and Boundary Scan Architecture
  • Low-power IDLE, STANDBY, and HALT modes
  • Development tools
    • Code Composer Studio™ IDE with flash programming plug-in
    • C28x-optimized ANSI C/C++ compiler/assembler/linker
    • SYS/BIOS real-time operating system
    • USB-based JTAG debug probes
      • IEEE Standard 1149.1-1990 Standard Test Access Port and Boundary Scan Architecture
  • Available Software
    • C2000™ Digital Power Supply Software Library
    • C28x IQ Math Library
    • C28x header files with example programs for all peripherals
    • C28x DSP Library
    • C28x Digital Motor Control Software Library
  • Package options
    • 100-pin Low-Profile Quad Flatpack (PZ)
    • 100-pin MicroStar BGA™ (GGM, ZGM)
    • RoHS-compliant, Green packaging
  • Temperature range:
    A: –40°C to 85°C (PZ, GGM, ZGM)
  • High-performance 100-MHz (10-ns cycle time) processor
  • TMS320C28x 32-bit CPU
    • Single-cycle 16 × 16 and 32 × 32 multiply-accumulate (MAC) operations
    • Dual 16 × 16 MAC
    • Fast interrupt response
    • Unified memory programming model
  • On-chip memory
    • 64K × 16 flash
    • 10K × 16 SARAM
    • 1K × 16 OTP
    • 4K × 16 Boot ROM
    • Code Security Module protects against unauthorized memory access
  • Clocking
    • On-chip oscillator
    • Clock-Fail-Detect mode
  • Interrupts
    • Support for up to three external core interrupts
    • Peripheral Interrupt Expansion (PIE) block that supports all peripheral interrupts
  • High-speed, 12-bit ADC
    • 80-ns (12.5-MSPS) conversion rate
    • 16 channels
    • Two sample-and-hold
    • Single/simultaneous conversions
    • Internal or external reference
  • High-resolution PWM
    • 16 outputs with 150-ps resolution
    • 14.8 bits at 200-kHz switching
    • 13.4 bits at 500-kHz switching
    • 12.4 bits at 1-MHz switching
  • Endianness: Little endian
  • Communications port peripherals
    • Serial Peripheral Interface (SPI) module
    • Serial Communications Interface (SCI)
    • Inter-Integrated Circuit (I2C) bus
  • Timers
    • Three 32-bit CPU timers
    • Up to 16 16-bit timers
    • Watchdog Timer module
  • Up to 35 General-Purpose Input/Output (GPIO) pins with input filtering
  • On-chip JTAG emulation with real-time debug via hardware
  • JTAG boundary scan support
    • IEEE Standard 1149.1-1990 Standard Test Access Port and Boundary Scan Architecture
  • Low-power IDLE, STANDBY, and HALT modes
  • Development tools
    • Code Composer Studio™ IDE with flash programming plug-in
    • C28x-optimized ANSI C/C++ compiler/assembler/linker
    • SYS/BIOS real-time operating system
    • USB-based JTAG debug probes
      • IEEE Standard 1149.1-1990 Standard Test Access Port and Boundary Scan Architecture
  • Available Software
    • C2000™ Digital Power Supply Software Library
    • C28x IQ Math Library
    • C28x header files with example programs for all peripherals
    • C28x DSP Library
    • C28x Digital Motor Control Software Library
  • Package options
    • 100-pin Low-Profile Quad Flatpack (PZ)
    • 100-pin MicroStar BGA™ (GGM, ZGM)
    • RoHS-compliant, Green packaging
  • Temperature range:
    A: –40°C to 85°C (PZ, GGM, ZGM)

The TMS320F28044 device, member of the TMS320C28x DSP generation, is a highly integrated, high-performance solution for demanding control applications.

Throughout this document, TMS320F28044 is abbreviated as F28044.

The TMS320F28044 device, member of the TMS320C28x DSP generation, is a highly integrated, high-performance solution for demanding control applications.

Throughout this document, TMS320F28044 is abbreviated as F28044.

Herunterladen Video mit Transkript ansehen Video

Ähnliche Produkte, die für Sie interessant sein könnten

Ähnliche Funktionalität wie der verglichene Baustein.
TMS320F280049 AKTIV C2000™-MCU, 32 Bit, mit 100 MHz, FPU, TMU, 256 KB Flash-Speicher, CLA, PGAs, SDFM This product is the latest 100 MHz / 100-pin series from C2000 real-time controllers.

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 46
Top-Dokumentation Typ Titel Format-Optionen Neueste englische Version herunterladen Datum
* Datenblatt TMS320F28044 Digital Signal Processor datasheet (Rev. D) PDF | HTML 04.06.2020
* Errata TMS320F28044 Digital Signal Processor Silicon Errata (Rev. F) PDF | HTML 04.06.2020
Benutzerhandbuch C2000 Real-Time Control Peripheral Reference Guide (Rev. V) PDF | HTML 06.07.2026
Anwendungshinweis Development Tool Versions for C2000™ Support (Rev. A) PDF | HTML 26.06.2024
Anwendungshinweis Achieve Delayed Protection for Three-Level Inverter With Type 4 EPWM PDF | HTML 29.10.2021
Anwendungshinweis C2000™ Unique Device Number (Rev. B) PDF | HTML 17.09.2020
Anwendungshinweis EEPROM Emulation for Gen 2 C2000 Real-Time MCUs (Rev. A) PDF | HTML 23.07.2020
Benutzerhandbuch SYS/BIOS (TI-RTOS Kernel) User's Guide (Rev. V) 01.06.2020
Anwendungshinweis Calculating Useful Lifetimes of Embedded Processors (Rev. B) PDF | HTML 07.05.2019
Anwendungshinweis MSL Ratings and Reflow Profiles (Rev. A) 13.12.2018
Anwendungshinweis Hardware Design Guidelines for TMS320F28xx and TMS320F28xxx DSCs (Rev. D) 18.11.2018
Anwendungshinweis Programming TMS320x28xx and 28xxx Peripherals in C/C++ (Rev. E) PDF | HTML 19.12.2017
Anwendungshinweis C2000™ MISRA-C Policy 26.09.2017
Anwendungshinweis Copying Compiler Sections from Flash to RAM on the TMS320F28xxx DSCs (Rev. A) PDF | HTML 18.08.2017
Anwendungshinweis Calculator for CAN Bit Timing Parameters PDF | HTML 22.03.2016
Benutzerhandbuch TMS320C28x DSP CPU and Instruction Set (Rev. F) 10.04.2015
Anwendungshinweis Calculating FIT for a Mission Profile 24.03.2015
Benutzerhandbuch TMS320x280x, 2801x, 2804x System Control and Interrupts Reference Guide (Rev. H) 03.10.2012
Benutzerhandbuch TMS320x280x, 2801x, 2804x High Resolution PWM (HRPWM) Reference Guide (Rev. F) 04.10.2011
Benutzerhandbuch TMS320x281x Multichannel Buffered Serial Port (McBSP) Reference Guide (Rev. D) 29.08.2011
Benutzerhandbuch TMS320x280x, 2801x, 2804x Inter-Integrated Circuit (I2C) Reference Guide (Rev. C) 29.06.2011
Benutzerhandbuch TMS320x280x, 2801x, 2804x Serial Communications Interface (SCI) Reference Guide (Rev. B) 19.04.2011
Benutzerhandbuch TMS320x280x 2801x, 2804x Analog-to-Digital Converter(ADC) Module Reference Guide (Rev. D) 26.04.2010
Anwendungshinweis Programming External Nonvolatile Memory Using SDFlash for TMS320C28x Devices 16.11.2009
Benutzerhandbuch TMS320x280x, 2801x, 2804x Enhanced Pulse Width Modulator (ePWM) Module RG (Rev. F) 14.07.2009
Anwendungshinweis Common Object File Format (COFF) 15.04.2009
Anwendungshinweis Migrating from TMS320x2833x/2823x to TMS320x2834x 03.03.2009
Benutzerhandbuch TMS320x280x, 2801x, 2804x Serial Peripheral Interface (SPI) Reference Guide 05.02.2009
Benutzerhandbuch TMS320x280x, 2801x DSP Enhanced Controller Area Network (eCAN) User's Guide 22.01.2009
Benutzerhandbuch TMS320x280x, 2801x, 2804x Enhanced Quadrature Encoder Pulse (eQEP) RG (Rev. D) 18.12.2008
Anwendungshinweis Flash Programming Solutions for the TMS320F28xxx DSCs 19.08.2008
Anwendungshinweis An Overview of Designing Analog Interface With TM320F28xx/28xxx DSCs (Rev. A) 14.05.2008
Anwendungshinweis Microstepping Bipolar Drive of Two-Phase Hybrid Stepping Motor on F2808 DSP 02.05.2008
Anwendungshinweis TMS320F28xx and TMS320F28xxx DSP Power Reference Design (Rev. A) 10.04.2008
Anwendungshinweis Configuring Source of Multiple ePWM Trip-Zone Events 25.10.2007
Benutzerhandbuch TMS320x280x, 2801x, 2804x Enhanced Capture (ECAP) Module Reference Guide (Rev. B) 12.10.2007
Anwendungshinweis Custom Bootloader Options via One-Time Programmable (OTP) Memory 18.09.2007
Anwendungshinweis Interfacing SD/MMC Cards With TMS320F28xxx DSCs 26.07.2007
Anwendungshinweis Configuring the TMS320F280x DSP as an I2C Processor 29.06.2007
Anwendungshinweis Using Enhanced Pulse Width Modulator (ePWM) Module for 0-100% Duty Cycle Control 20.12.2006
Benutzerhandbuch TMS320x281x Boot ROM Reference Guide (Rev. C) 04.12.2006
Anwendungshinweis Using the eQEP Module in TMS320x280x as a Dedicated Capture 30.11.2006
Anwendungshinweis Migrating from TMS320x281x to TMS320x280x/2801x/2804x (Rev. A) 05.10.2006
Benutzerhandbuch TMS320x280x, 2801x, 2804x DSP Boot ROM Reference Guide (Rev. C) 03.10.2006
Anwendungshinweis TMS320F280x DSC USB Connectivity Using TUSB3410 USB-to-UART Bridge Chip 26.05.2006
Anwendungshinweis Online Stack Overflow Detection on the TMS320C28x DSP 02.05.2003

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

ALGO-3P-UISP1-TI — Algocraft μISP1 Programmierer für Texas Instruments-Bausteine

μISP kann entweder an einen Host-PC angeschlossen (RS-232-, USB-, LAN-Verbindungen sind integriert) oder im Standalone-Modus arbeiten.

Die Programmierungszyklusausführung im Standalone-Modus kann durch einfaches Drücken der START-Taste oder über einige TTL-Steuerleitungen erfolgen.

Seine kompakte (...)

Von: Algocraft
Unterstützte Produkte und Hardware
Debug-Tastkopf

TMDSEMU200-U — XDS200-USB-Debug-Tastkopf

Der XDS200 ist ein Debug-Tastkopf (Emulator) zum Debugging von Embedded-Bausteinen von TI. Für die meisten Bausteine wird die Verwendung der neueren, kostengünstigeren XDS110 (www.ti.com/tool/TMDSEMU110-U) empfohlen. Der XDS200 unterstützt eine große Zahl von Standards (IEEE1149.1, IEEE1149.7, SWD) (...)

Unterstützte Produkte und Hardware
Vorrätig
Limit:
??asset.out-of-stock-ti_de_DE??
Nicht verfügbar
Debug-Tastkopf

TMDSEMU560V2STM-U — XDS560™-Software v2 – System-Trace-USB-Debug-Sonde

XDS560v2 ist die Debug-Sonde mit der höchsten Leistung der XDS560™-Produktfamilie und unterstützt sowohl den herkömmlichen JTAG-Standard (IEEE1149.1) als auch cJTAG (IEEE1149.7).  Beachten Sie, dass das Serial Wire Debugging (SWD) nicht unterstützt wird.

Alle XDS-Debug-Sonden unterstützen Core- und (...)

Unterstützte Produkte und Hardware
Vorrätig
Limit:
??asset.out-of-stock-ti_de_DE??
Nicht verfügbar
Debug-Tastkopf

TMDSEMU560V2STM-UE — XDS560v2 System-Trace-USB-und Ethernet-Debug-Tastkopf

The XDS560v2 is the highest performance of the XDS family of debug probes and supports both the traditional JTAG standard (IEEE1149.1) and cJTAG (IEEE1149.7). Note that it does not support serial wire debug (SWD).

All XDS debug probes support Core and System Trace in all ARM and DSP processors that (...)

Unterstützte Produkte und Hardware
Vorrätig
Limit:
??asset.out-of-stock-ti_de_DE??
Nicht verfügbar
Hardware-Programmiertool

ALGO-3P-WRITENOW — Algocraft WriteNow! Programmierer

WriteNow! Die Reihe der systeminternen Programmierer ist ein Durchbruch in der Programmierbranche. Die Programmierer unterstützen eine große Anzahl von Bausteinen (Mikrocontroller, Speicher, CPLDs und andere programmierbare Bausteine) verschiedener Hersteller und verfügen über eine kompakte Größe (...)

Von: Algocraft
Unterstützte Produkte und Hardware
IDE, Konfiguration, Compiler oder Debugger

C2000_CLA_SAFETI_CQKIT_RV — C2000™ and CLA safety compiler qualification kit (leverages compiler release validations)

Das Sicherheits-Compiler-Qualifizierungskit möchte Kunden dabei unterstützen, den Einsatz des ARM C/C++-Compilers C6000, C7000 oder C2000/CLA von TI für funktionale Sicherheitsstandards wie beispielsweise IEC 61508 und ISO 26262 zu qualifizieren.

Das Sicherheits-Compiler-Qualifizierungskit:

  • ist für (...)
Unterstützte Produkte und Hardware
IDE, Konfiguration, Compiler oder Debugger

CCSTUDIO — Code Composer Studio integrated development environment (IDE)

CCStudio™ IDE is part of TI's extensive CCStudio™ development ecosystem and is an integrated development environment for TI's microcontrollers, processors, wireless connectivity devices, and radar sensors. CCStudio IDE is available as desktop or cloud-based applications. The cloud version (...)

Unterstützte Produkte und Hardware
IDE, Konfiguration, Compiler oder Debugger

SOLUTION_ADAPTER — powerSUITE-Adaptertool für digitale Stromversorgungsanwendungen für C2000™-MCUs

The Solution Adapter is one of several tools included in the powerSUITE Digital Power Supply Design Software Tools for C2000™ Microcontrollers.  The Solution Adapter allows you to modify existing code examples from TI digital power kits and configure them to run on a custom digital power (...)

Unterstützte Produkte und Hardware
Erste Schritte

TI-DEVELOPER-ZONE — Start embedded development on your desktop or in the cloud

From evaluation to deployment the TI Developer Zone provides a comprehensive range of software, tools and training to ensure that you have everything you need for each stage of the development process.
Unterstützte Produkte und Hardware
Betriebssystem (BS)

WHIS-3P-SAFERTOS — WITTENSTEIN SAFERTOS Vorzertifiziertes Sicherheits-RTOS

SAFERTOS® ist ein einzigartiges Echtzeitbetriebssystem für Embedded-Prozessoren. Er ist vom TÜV SÜD nach den Normen IEC 61508 SIL3 und ISO 26262 ASILD vorzertifiziert. SAFERTOS® wurde vom Expertenteam von WHIS speziell auf Sicherheit ausgelegt und wird weltweit in sicherheitskritischen Anwendungen (...)

Unterstützte Produkte und Hardware
Software-Programmiertool

UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors

UniFlash ist Teil des umfassenden CCStudio™-Entwicklungsökosystem von TI und ein Softwaretool zur Programmierung des integrierten Flash-Speichers von TI-Mikrocontrollern und drahtlosen Kommunikationsbausteinen sowie des integrierten Flash-Speichers für TI-Prozessoren. UniFlash bietet sowohl (...)

Unterstützte Produkte und Hardware
Support-Software

SPRC324 — C2804x C/C++ Header Files and Peripheral Examples (including F2804x)

Unterstützte Produkte und Hardware
Support-Software

SPRC325 — Download: TMS320F2804x Flash APIs

Are you looking to integrate flash programming into your project?

If so the TMS320F28044 Flash API Release is what you're looking for. This download contains complete example projects and documentation to get you on your way.

Embedded Flash programming offers several opportunities to the system (...)

Unterstützte Produkte und Hardware
Simulationsmodell

F28044 GGM IBIS Model

SPRM447.ZIP (204 KB) - IBIS-Modell
Unterstützte Produkte und Hardware
Simulationsmodell

F28044 GGM/ZGM BSDL Model

SPRM246.ZIP (4 KB) - BSDL-Modell
Unterstützte Produkte und Hardware
Simulationsmodell

F28044 PZ BSDL Model

SPRM247.ZIP (4 KB) - BSDL-Modell
Unterstützte Produkte und Hardware
Simulationsmodell

F28044 PZ IBIS Model

SPRM301.ZIP (225 KB) - IBIS-Modell
Unterstützte Produkte und Hardware
Simulationsmodell

F28044 ZGM IBIS Model

SPRM446.ZIP (204 KB) - IBIS-Modell
Unterstützte Produkte und Hardware
Designtool

C2000-3P-SEARCH — C2000 Drittanbieter-Suchtool

TI has partnered with multiple companies to offer a wide range of solutions and services for TI C2000 devices. These companies can accelerate your path to production using C2000 devices. Download this search tool to quickly browse third-party details and find the right third-party to meet your (...)

Unterstützte Produkte und Hardware
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
LQFP (PZ) 100 Ultra Librarian

Bestellen & Qualität

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos