The TPD1S514 Family consists of single-chip protection solutions for 5-V, 9-V or 12-V USB VBUS lines, or other power buses. The bidirectional nFET switch ensures safe current flow in both charging and host mode while protecting the internal system circuits from any over voltage condition at the VBUS_CON pin. On the VBUS_CON pin, this device can handle over voltage protection up to 30-V DC. After the EN pin toggles low, any device in the TPD1S514 Family waits 20 ms before turning ON the nFET through a soft start delay.
Typical application interfaces for the TPD1S514 Family are VBUS lines in USB connectors typically found in cell phones, tablets, eBooks, and portable media players. The TPD1S514 Family can also be applied to any system using an interface for a 5-V, 9-V, or 12-V power rail.
| Top-Dokumentation | Typ | Titel | Format-Optionen | Neueste englische Version herunterladen | Datum |
|---|---|---|---|---|---|
| * | Datenblatt | TPD1S514x Family USB Charger Overvoltage, Surge and ESD Protection for VBUS PIN datasheet (Rev. F) | PDF | HTML | 08.05.2019 | |
| Benutzerhandbuch | Reading and Understanding an ESD Protection Data Sheet (Rev. A) | PDF | HTML | 19.09.2023 | ||
| Anwendungshinweis | ESD Protection Layout Guide (Rev. A) | PDF | HTML | 07.04.2022 | ||
| Technischer Artikel | Big USB Type-C™ protection for your small application | PDF | HTML | 31.07.2017 | ||
| Auswahlhilfe | ESD by Interface Selection Guide (Rev. A) | 26.06.2017 | |||
| Whitepaper | Designing USB for short-to-battery tolerance in automotive environments | 10.02.2016 | |||
| Benutzerhandbuch | TPD1S514-2EVM User’s Guide | 24.07.2014 | |||
| Analog Design Journal | Design Considerations for System-Level ESD Circuit Protection | 25.09.2012 |
Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.
Texas Instrument’s TPD1S514 evaluation module helps designers evaluate the operation and performance of the TPD1S514 device. The TPD1S514 is a single-chip solution for USB connector’s VBUS line protection. The bi-directional nFET switch ensures safe current flow in both charging and (...)
Texas Instrument’s TPD1S514-3 evaluation module helps designers evaluate the operation and performance of the TPD1S514-3 device. The TPD1S514-3 is a single-chip solution for a USB connector’s VBUS line protection. The bi-directional nFET switch ensures safe current flow in both charging (...)
| Gehäuse | Pins | CAD-Symbole, Footprints und 3D-Modelle |
|---|---|---|
| DSBGA (YZ) | 12 | Ultra Librarian |
Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.
Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support.