Startseite Motortreiber Treiber für optische Laufwerke
Startseite
Motortreiber
Treiber für optische Laufwerke

TPIC2030

AKTIV

Über eine serielle Schnittstelle gesteuerter 7-Kanal-Motortreiber mit 1-Kanal-Abwärtsregler

Jetzt bestellen
Datenblatt

TPIC2030

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Applications CD, DVD Motor driver channels 7 Integrated supply 1 LDO predriver Operating supply (V) 5 Driver supply voltage (V) 5 Operating temperature range (°C) -20 to 75 Rating Catalog
Applications CD, DVD Motor driver channels 7 Integrated supply 1 LDO predriver Operating supply (V) 5 Driver supply voltage (V) 5 Operating temperature range (°C) -20 to 75 Rating Catalog
TSSOP (DBT) 44 71.36 mm² 11.15 x 6.4
  • Serial Peripheral Interface
    • Maximum Read/Write 35 MHz
    • 3.3-V Digital I/O
  • Actuator and Motor Driver
    • PWM Control With H-Bridge Output
    • Focus / Tracking / Tilt Actuator Driver With 12-
      Bit DAC Control
    • Sled Motor Drivers With Current Mode, 10-Bit
      DAC Control
    • Load Driver With 12-Bit DAC Control
    • End Position Sensing for Sled Without Position
      Sensor
  • Spindle Motor Driver
    • Integrated Spindle Current Sense Resistor
    • Sensor-Less: Rotor Position Sense by Motor
      BEMF
    • 12-Bit Spindle DAC
    • Quick Stop by Automatic Controlled Brake
      (Auto Short Brake)
    • LS Mode: Restricted to 25% of Normal Speed
  • On-Chip Thermometer (15°C to 165°C/1.2°C)
  • Software Controlled Switch for LED Driver With
    0.1-A OCP
  • Switch
    • CSW: Low RDS(ON) Current Switch With
      Selectable OCP Limit (Supposing Use <0.2 A)
    • LED: Software Control Current Output Port
      With 0.1-A OCP
  • DC-DC Converter
    • Pin Selectable Conversion Voltage 1.0 V/ 1.2 V/\
      1.5 V/ 3.3 V (or Disable)
    • Improved Efficiency at Low Current With
      Discontinuous Regulation Mode
  • Protection
    • Individual Thermal Protect Circuit on
      LED/CSW, Switch, DCDC Converter, SPM,
      and Actuator
    • Overcurrent Protection
    • Undervoltage Lockout (UVLO) and
      Overvoltage Protection (OVP)
  • Serial Peripheral Interface
    • Maximum Read/Write 35 MHz
    • 3.3-V Digital I/O
  • Actuator and Motor Driver
    • PWM Control With H-Bridge Output
    • Focus / Tracking / Tilt Actuator Driver With 12-
      Bit DAC Control
    • Sled Motor Drivers With Current Mode, 10-Bit
      DAC Control
    • Load Driver With 12-Bit DAC Control
    • End Position Sensing for Sled Without Position
      Sensor
  • Spindle Motor Driver
    • Integrated Spindle Current Sense Resistor
    • Sensor-Less: Rotor Position Sense by Motor
      BEMF
    • 12-Bit Spindle DAC
    • Quick Stop by Automatic Controlled Brake
      (Auto Short Brake)
    • LS Mode: Restricted to 25% of Normal Speed
  • On-Chip Thermometer (15°C to 165°C/1.2°C)
  • Software Controlled Switch for LED Driver With
    0.1-A OCP
  • Switch
    • CSW: Low RDS(ON) Current Switch With
      Selectable OCP Limit (Supposing Use <0.2 A)
    • LED: Software Control Current Output Port
      With 0.1-A OCP
  • DC-DC Converter
    • Pin Selectable Conversion Voltage 1.0 V/ 1.2 V/\
      1.5 V/ 3.3 V (or Disable)
    • Improved Efficiency at Low Current With
      Discontinuous Regulation Mode
  • Protection
    • Individual Thermal Protect Circuit on
      LED/CSW, Switch, DCDC Converter, SPM,
      and Actuator
    • Overcurrent Protection
    • Undervoltage Lockout (UVLO) and
      Overvoltage Protection (OVP)

TPIC2030 is very-low noise type motor driver IC suitable for slim or ultra-slim DVD reader/writer. The integrated current sense resistance for the spindle motor reduces cost and board area in designs. The TPIC2030 is an integrated solution for driving the spindle motor, sled motor, load motor, and Focus / Tracking / Tilt actuators in an optical disk drive. It also integrates a synchronous DC-DC converter to supply 1.0 or 3.3 V. The discontinuous mode regulation feature on the DC-DC converter improves efficiency at low power consumption.

Sensorless control using BEMF allows for self-starting and low-noise operation of the spindle motor without requiring external sensors. In addition, the TPIC2030 has many built-in protection features including: spindle driver output current limiting, thermal shutdown, sled-end detection, and power-reset circuit. It also integrates a thermometer to measure IC temperature.

TPIC2030 is very-low noise type motor driver IC suitable for slim or ultra-slim DVD reader/writer. The integrated current sense resistance for the spindle motor reduces cost and board area in designs. The TPIC2030 is an integrated solution for driving the spindle motor, sled motor, load motor, and Focus / Tracking / Tilt actuators in an optical disk drive. It also integrates a synchronous DC-DC converter to supply 1.0 or 3.3 V. The discontinuous mode regulation feature on the DC-DC converter improves efficiency at low power consumption.

Sensorless control using BEMF allows for self-starting and low-noise operation of the spindle motor without requiring external sensors. In addition, the TPIC2030 has many built-in protection features including: spindle driver output current limiting, thermal shutdown, sled-end detection, and power-reset circuit. It also integrates a thermometer to measure IC temperature.
filter Andere Treiber für optische Laufwerke suchen
Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 1
Typ Titel Datum
* Data sheet TPIC2030 Serial I/F Controlled 7-Channel Motor-Driver With 1-Channel Step Down Regulator datasheet PDF | HTML 16 Dez 2015

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
TSSOP (DBT) 44 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos