Startseite Logik- & Spannungsumsetzung Spannungsumsetzer & Pegelverschieber Umsetzer mit Masseverschiebung
Startseite
Logik- & Spannungsumsetzung
Spannungsumsetzer & Pegelverschieber
Umsetzer mit Masseverschiebung
NEU

TXG8122-Q1

VORSCHAU

Bidirektionaler Massepegelumsetzer für die Automobilindustrie, 80 V, 2 Bit, für I2C-Signale

Jetzt bestellen
Datenblatt

TXG8122-Q1

VORSCHAU
Datenblatt Jetzt bestellen

Produktdetails

Rating Catalog Ground offset voltage (max) (V) 80 Bits (#) 2 Topology Open drain Applications GPIO, I2C, SMBus Forward/reverse channels 2/2 Isolation rating Functional Data rate (max) (Mbps) 2 Prop delay (ns) 69 CMTI (V/µs) 500 Output drive capability (max) (mA) 50 Technology family TXG Vin (min) (V) 3 Vin (max) (V) 5.5 Vout (min) (V) 2.25 Vout (max) (V) 5.5 Current consumption per channel (1 Mbps) (typ) (mA) 4.2 Features AEC Q100
Rating Catalog Ground offset voltage (max) (V) 80 Bits (#) 2 Topology Open drain Applications GPIO, I2C, SMBus Forward/reverse channels 2/2 Isolation rating Functional Data rate (max) (Mbps) 2 Prop delay (ns) 69 CMTI (V/µs) 500 Output drive capability (max) (mA) 50 Technology family TXG Vin (min) (V) 3 Vin (max) (V) 5.5 Vout (min) (V) 2.25 Vout (max) (V) 5.5 Current consumption per channel (1 Mbps) (typ) (mA) 4.2 Features AEC Q100
SOIC (D) 8 29.4 mm² 4.9 x 6
  • AEC-Q100 qualified for automotive applications
  • Bidirectional I2C compatible communication
  • Support for Standard-mode, Fast-mode, and Fast-mode Plus I2C operation
  • Supports DV shifts up to ±80V
  • Data rate up to 1MHz
  • Side 1 Supply Range: 3V to 5.5V
  • Side 2 Supply Range: 2.25V to 5.5V
  • Maximum capacitive load:
    • 80pF (Side 1) and 550pF (Side 2)
  • Open -drain outputs with current sink capability:
    • 3.5mA (Side 1) and 50mA (Side 2)
  • Low power consumption at 400kHz (typical):
    • ICC1 = 3.1mA, ICC2 = 0.7mA
  • Operating temperature from –40°C to +125°C
  • CMTI of 500V/µs
  • Latch-up performance exceeds 100mA per JESD 78, class II
  • ESD protection exceeds JESD 22
    • 2000V human-body model
    • 500V charged-device model
  • Package options provided: SOIC (8D), WSON (8DSG), SOT-23 (8DDF)
  • AEC-Q100 qualified for automotive applications
  • Bidirectional I2C compatible communication
  • Support for Standard-mode, Fast-mode, and Fast-mode Plus I2C operation
  • Supports DV shifts up to ±80V
  • Data rate up to 1MHz
  • Side 1 Supply Range: 3V to 5.5V
  • Side 2 Supply Range: 2.25V to 5.5V
  • Maximum capacitive load:
    • 80pF (Side 1) and 550pF (Side 2)
  • Open -drain outputs with current sink capability:
    • 3.5mA (Side 1) and 50mA (Side 2)
  • Low power consumption at 400kHz (typical):
    • ICC1 = 3.1mA, ICC2 = 0.7mA
  • Operating temperature from –40°C to +125°C
  • CMTI of 500V/µs
  • Latch-up performance exceeds 100mA per JESD 78, class II
  • ESD protection exceeds JESD 22
    • 2000V human-body model
    • 500V charged-device model
  • Package options provided: SOIC (8D), WSON (8DSG), SOT-23 (8DDF)

The TXG8122-Q1 device is a dual bidirectional, non-galvanic based voltage and ground-level translator for I2C. This device supports two separate configurable power-supply rails. Side 1 is designed to track VCC1 which accepts any supply voltage from 3V to 5.5V. Side 2 is designed to track VCC2 which accepts any supply voltage from 2.25V to 5.5V. Compared to traditional level shifters, the TXG8122-Q1 can solve the challenges of voltage translation across different ground levels up to ±80V. Both GNDA or GNDB can have an offset ground as long as the difference between GNDA and GNDB remains -80V to +80V.

The Simplified Block Diagram shows a common use case where DC shift occurs between GNDA to GNDB due to parasitic resistance or capacitance. The TXG8122-Q1 is able to support I2C-based communication between systems that have different supply voltages and different ground references. The leakage between GNDA and GNDB is typically 50nA when VCC to GND is shorted.

The TXG8122-Q1 device is a dual bidirectional, non-galvanic based voltage and ground-level translator for I2C. This device supports two separate configurable power-supply rails. Side 1 is designed to track VCC1 which accepts any supply voltage from 3V to 5.5V. Side 2 is designed to track VCC2 which accepts any supply voltage from 2.25V to 5.5V. Compared to traditional level shifters, the TXG8122-Q1 can solve the challenges of voltage translation across different ground levels up to ±80V. Both GNDA or GNDB can have an offset ground as long as the difference between GNDA and GNDB remains -80V to +80V.

The Simplified Block Diagram shows a common use case where DC shift occurs between GNDA to GNDB due to parasitic resistance or capacitance. The TXG8122-Q1 is able to support I2C-based communication between systems that have different supply voltages and different ground references. The leakage between GNDA and GNDB is typically 50nA when VCC to GND is shorted.
filter Andere Umsetzer mit Masseverschiebung suchen
Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 1
Typ Titel Datum
* Data sheet TXG8122-Q1 ± 80V Bidirectional Ground-Level Translator for I2C datasheet PDF | HTML 06 Jun 2025

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

TXG-4CH-EVM — TXG-Evaluierungsmodul für vierkanaligen Erdungspegelumsetzer

TXG-4CH-EVM ist ein Evaluierungsmodul (EVM) zum Bewerten der vierkanaligen Erdungspegelumsetzer der TXGx04x-Produktfamilie. Das EVM unterstützt mehrere Gehäuseoptionen, darunter das 16-polige DBQ, das 14-polige DYY und das 14-polige RUC. Das EVM verfügt über mehrere Messpunkte und (...)
Benutzerhandbuch: PDF | HTML
Nicht verfügbar auf TI.com
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
SOIC (D) 8 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos