Inicio Interfaz Circuitos integrados Ethernet Capa física (PHY) Ethernet

DP83869HM

ACTIVO

Transceptor PHY Gigabit Ethernet de alta inmunidad y temperatura ampliada con interfaz de cobre y fi

Detalles del producto

Datarate (Mbps) 10/100/1000 Interface type MII, RGMII, SGMII Rating Catalog Number of ports Single Features Bridge mode, Cable diagnostics, EtherCAT, EtherNet/IP, FX support, JTAG1149.1, Media convertor, Profinet I/O supply voltage (typ) (V) 1.8, 2.5, 3.3 Operating temperature range (°C) -40 to 125 Number of LEDs 3 ESD HBM (kV) 8
Datarate (Mbps) 10/100/1000 Interface type MII, RGMII, SGMII Rating Catalog Number of ports Single Features Bridge mode, Cable diagnostics, EtherCAT, EtherNet/IP, FX support, JTAG1149.1, Media convertor, Profinet I/O supply voltage (typ) (V) 1.8, 2.5, 3.3 Operating temperature range (°C) -40 to 125 Number of LEDs 3 ESD HBM (kV) 8
VQFN (RGZ) 48 49 mm² (7 mm × 7 mm)
  • Multiple operating modes
    • Media support: copper and fiber
    • Media conversion between copper and fiber
    • Bridge between RGMII and SGMII
  • Maximum ambient temperature available of 125°C
  • Exceeds 8kV IEC61000-4-2 ESD
  • Low power consumption
    • < 150mW for 1000Base-X
    • < 500mW for 1000Base-T
  • Low RGMII latency
    • Total latency ≤ 384ns for 1000Base-T
    • Total latency ≤ 361ns for 100Base-TX
  • Time Sensitive Network (TSN) compliant
  • Recovered clock output for SyncE
  • Selectable synchronized clock output: 25MHz and 125MHz
  • SFF-8431V4.1, 1000BASE-X and 100BASE-FX compatible
  • IEEE1588 support using SFD
  • Wake on LAN support
  • Configurable IO voltages: 1.8V, 2.5V, and 3.3V
  • SGMII, RGMII, MII MAC interface
  • Jumbo frame support for 1000M and 100M speed
  • Cable diagnostics
    • TDR
    • BIST
  • Programmable RGMII termination impedance
  • Integrated MDI termination resistor
  • Fast link drop modes
  • Conforms to IEEE 802.3 1000Base-T, 100Base-TX, 10Base-Te,1000Base-X, 100Base-FX
  • Multiple operating modes
    • Media support: copper and fiber
    • Media conversion between copper and fiber
    • Bridge between RGMII and SGMII
  • Maximum ambient temperature available of 125°C
  • Exceeds 8kV IEC61000-4-2 ESD
  • Low power consumption
    • < 150mW for 1000Base-X
    • < 500mW for 1000Base-T
  • Low RGMII latency
    • Total latency ≤ 384ns for 1000Base-T
    • Total latency ≤ 361ns for 100Base-TX
  • Time Sensitive Network (TSN) compliant
  • Recovered clock output for SyncE
  • Selectable synchronized clock output: 25MHz and 125MHz
  • SFF-8431V4.1, 1000BASE-X and 100BASE-FX compatible
  • IEEE1588 support using SFD
  • Wake on LAN support
  • Configurable IO voltages: 1.8V, 2.5V, and 3.3V
  • SGMII, RGMII, MII MAC interface
  • Jumbo frame support for 1000M and 100M speed
  • Cable diagnostics
    • TDR
    • BIST
  • Programmable RGMII termination impedance
  • Integrated MDI termination resistor
  • Fast link drop modes
  • Conforms to IEEE 802.3 1000Base-T, 100Base-TX, 10Base-Te,1000Base-X, 100Base-FX

The DP83869HM device is a robust, fully-featured gigabit physical layer (PHY) transceiver with integrated PMD sub-layers that supports 10BASE-Te, 100BASE-TX and 1000BASE-T Ethernet protocols. The DP83869 also supports 1000BASE-X and 100BASE-FX fiber protocols. Optimized for ESD protection, the DP83869HM exceeds 8kV IEC 61000-4-2 (direct contact).This device interfaces to the MAC layer through reduced GMII (RGMII) and SGMII. In 100M mode, the device lets the designer use MII for lower latency. Programmable integrated termination impedance on RGMII/MII helps reduce system BOM.

The DP83869HM supports media conversion in unmanaged mode. In this mode, the DP83869HM can run 1000BASE-X-to-1000BASE-T and 100BASE-FX-to-100BASE-TX conversions.

The DP83869HM can also support bridge conversion from RGMII to SGMII and SGMII to RGMII. The DP83869HM is compliant to TSN standards and offers low latency.

The DP83869HM can also generate IEEE 1588 Sync Frame Detect indications to MAC. This can reduce the jitter in time synchronization and help the system account for asymmetric delays in transmission and reception of packets.

The standard Ethernet system block diagram is shown in the Standard Ethernet System Block Diagram. Designers can also use the DP83869 in Media Convertor mode in RGMII-to-SGMII Bridge and SGMII-RGMII Bridge applications.

The DP83869HM device is a robust, fully-featured gigabit physical layer (PHY) transceiver with integrated PMD sub-layers that supports 10BASE-Te, 100BASE-TX and 1000BASE-T Ethernet protocols. The DP83869 also supports 1000BASE-X and 100BASE-FX fiber protocols. Optimized for ESD protection, the DP83869HM exceeds 8kV IEC 61000-4-2 (direct contact).This device interfaces to the MAC layer through reduced GMII (RGMII) and SGMII. In 100M mode, the device lets the designer use MII for lower latency. Programmable integrated termination impedance on RGMII/MII helps reduce system BOM.

The DP83869HM supports media conversion in unmanaged mode. In this mode, the DP83869HM can run 1000BASE-X-to-1000BASE-T and 100BASE-FX-to-100BASE-TX conversions.

The DP83869HM can also support bridge conversion from RGMII to SGMII and SGMII to RGMII. The DP83869HM is compliant to TSN standards and offers low latency.

The DP83869HM can also generate IEEE 1588 Sync Frame Detect indications to MAC. This can reduce the jitter in time synchronization and help the system account for asymmetric delays in transmission and reception of packets.

The standard Ethernet system block diagram is shown in the Standard Ethernet System Block Diagram. Designers can also use the DP83869 in Media Convertor mode in RGMII-to-SGMII Bridge and SGMII-RGMII Bridge applications.

Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Misma funcionalidad con diferente configuración de pines que el dispositivo comparado
DP83867IS ACTIVO Transceptor PHY gigabit ethernet resistente a temperatura industrial con SGMII This product supports SGMII and operates over an industrial temperature range of -40°C to 85°C
DP83867E ACTIVO Transceptor PHY gigabit ethernet de baja latencia resistente y temperatura ampliada con SGMII This product supports RGMII & SGMII and operates over an extended temperature range of -40°C to 105°C
DP83867IR ACTIVO Transceptor PHY gigabit ethernet resistente a temperatura industrial This product supports rGMII and operates over an industrial temperature range of -40°C to 85°C

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 21
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos DP83869HM High Immunity 10/100/1000 Ethernet Physical Layer Transceiver With Copper and Fiber Interface datasheet (Rev. E) PDF | HTML 15/04/2026
Nota sobre la aplicación DP83869 Troubleshooting Guide (Rev. A) PDF | HTML 1/08/2025
Nota sobre la aplicación How to Configure DP8386x for Ethernet Compliance Testing (Rev. D) PDF | HTML 8/04/2025
Nota sobre la aplicación Ethernet PHY Fiber Debug Guide PDF | HTML 7/04/2025
Nota sobre la aplicación SGMII Troubleshooting Guide PDF | HTML 5/11/2024
Nota sobre la aplicación Optimizing EMC Performance in Industrial Ethernet Application (Rev. A) PDF | HTML 15/10/2024
Nota sobre la aplicación DP838xx Wake-on-LAN (Rev. A) PDF | HTML 4/03/2024
Nota sobre la aplicación How and When to Use Ethernet PHYs in PROFINET Systems PDF | HTML 29/09/2023
Nota sobre la aplicación Time Domain Reflectometry with DP83867 and DP83869 PDF | HTML 2/06/2023
Nota sobre la aplicación How to Pass IEEE Ethernet Compliance Tests PDF | HTML 20/09/2021
Nota sobre la aplicación Ethernet PHY PCB Design Layout Checklist PDF | HTML 1/06/2021
Artículo técnico A history of industrial Ethernet protocols and their benefits PDF | HTML 15/07/2020
Artículo técnico Top 3 considerations for harsh industrial Ethernet PDF | HTML 4/11/2019
Nota sobre la aplicación 88E1512 to DP83867 and DP83869 System Rollover 30/08/2019
Nota sobre la aplicación AR8031 to DP83867 and DP83869 System Rollover 30/08/2019
Artículo técnico Solving synchronization challenges in Industrial Ethernet PDF | HTML 19/07/2019
Nota sobre la aplicación Understanding different modes of operation in DP83869 12/02/2019
Nota sobre la aplicación Selection and specification of crystals for Texas Instruments ethernet physical 6/02/2019
Nota sobre la aplicación DP83869 1000Base-X Link Detection 4/12/2018
Artículo técnico Fiber in industrial applications PDF | HTML 21/04/2016
Artículo técnico Three things you should know about Ethernet PHY PDF | HTML 15/07/2015

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

DP83869EVM — Módulo de evaluación de PHY Ethernet industrial de cobre y fibra

Utilice el módulo de evaluación DP83869EVM (EVM) para probar las distintas características de la Ethernet PHY DP83869HM. El EVM es compatible con protocolos Ethernet de cobre como 10BASE-Te, 100BASE-TX y 1000BASE-T. También es compatible con protocolos de fibra como 100BASE-TX y 1000BASE-T. El (...)
Guía del usuario: PDF | HTML
Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Placa de evaluación

HSEC180ADAPEVM-AM2 — Tarjeta adaptadora HSEC180 para el módulo de evaluación del sistema en módulo (SOM) AM261x

Este módulo de evaluación es un adaptador de tarjeta de borde de alta velocidad (HSEC) de 180 pines para plataformas de sistema en módulo (SOM) AM261x de TI, que permite que las plataformas basadas en SOM tengan compatibilidad con versiones anteriores de EVM basadas en HSEC Sitara™/C2000™. El (...)

Guía del usuario: PDF | HTML
Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Placa de evaluación

LP-AM263P — Kit de desarrollo LaunchPad™ AM263Px MCU de uso general basado en Arm®

El LP-AM263P es una placa de desarrollo de costo optimizado para microcontroladores (MCU) de alto rendimiento de la serie AM263Px de Sitara™. Esta placa es ideal para la evaluación inicial y la creación de prototipos, ya que proporciona una plataforma estandarizada y fácil de usar para desarrollar (...)

Guía del usuario: PDF | HTML
Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Placa de evaluación

TMDS64EVM — Módulo de evaluación AM64x para procesadores Sitara™

El módulo de evaluación (EVM) TMDS64 es una plataforma independiente de pruebas y desarrollo ideal para acelerar la fase de prototipo de su próximo diseño.  El TMDS64EVM está equipado con un procesador Sitara™ AM6442 junto con componentes adicionales que permiten al usuario hacer uso de varias (...)

Guía del usuario: PDF | HTML
Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Tarjeta secundaria

DP8386X-ASPEED-EVM — Tarjeta secundaria DP8386X para placa portadora AST2600

El EVM de PHY Ethernet ASPEED es una tarjeta secundaria para conectarse a la placa de evaluación (EVB) AST2600 de ASPEED para mostrar cómo se pueden usar las PHY Ethernet DP83867 y DP83869 en un sistema de controlador de gestión de placas (BMC). El EVM contiene cuatro PHY, cada una con una (...)

Guía del usuario: PDF | HTML
Productos y hardware compatibles
Controlador o biblioteca

ETHERNET-SW — Controladores y herramientas de PHY Ethernet

Los controladores para transceptores de capa física (PHY) Ethernet de Texas Instruments admiten la comunicación a través de la interfaz de administración en serie (MDC/MDIO) para configurar y leer registros PHY. Puede encontrar controladores Linux y RTOS en nuestro github.

 

Productos y hardware compatibles
Soporte de software

USB-2-MDIO — USB-2-MDIO Tool v1.0

La herramienta de software USB-2-MDIO permite a los PHY Ethernet de Texas Instruments acceder a los registros de estado y control de dispositivos MDIO.  La herramienta USB-2-MDIO incluye un kit de desarrollo LaunchPad™ para los MCU MSP430™ de TI que está conectado con una interfaz gráfica de (...)

Productos y hardware compatibles
Modelo de simulación

DP83869 IBIS Model (Rev. A)

SNLM216A.ZIP (728 KB) - Modelo IBIS
Productos y hardware compatibles
Diseño de referencia

TIDA-00306 — Diseño de referencia de convertidor de medios 100BASE-FX o 1000BASE-X de cobre a fibra para aplicaci

Este diseño de referencia detalla una metodología para utilizar la placa de evaluación DP83849 para implementar un convertidor de medios 10/100BASE-TX a 10/100BASE-FX, lo que permite que los equipos heredados basados en cobre se conecten fácilmente a una red de fibra. Ethernet basado en cobre (...)

Productos y hardware compatibles
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
VQFN (RGZ) 48 Ultra Librarian

Pedidos y calidad

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos