DRV2665

ACTIVO

Controlador háptico para piezoeléctrico con convertidor reforzado de 105 V integrado y DAC

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat DRV2665 Piezo Haptic Driver with Integrated Boost Converter and Digital Front End datasheet (Rev. C) (Inglés) PDF | HTML

DRV2665

ACTIVO

Hoja de datos

Haga su pedido ahora

Detalles del producto

Features

Adjustable current limit, Waveform generation

Haptic actuator type

Piezo

Input signal

Analog, I2C, PWM

Output voltage (max) (V)

200

Shutdown current (ISD) (µA)

10

Boost voltage (max) (V)

105

Vs (max) (V)

5.5

Vs (min) (V)

3

Operating temperature range (°C)

-40 to 70

Rating

Catalog

Features

Adjustable current limit, Waveform generation

Haptic actuator type

Piezo

Input signal

Analog, I2C, PWM

Output voltage (max) (V)

200

Shutdown current (ISD) (µA)

10

Boost voltage (max) (V)

105

Vs (max) (V)

5.5

Vs (min) (V)

3

Operating temperature range (°C)

-40 to 70

Rating

Catalog

VQFN (RGP)

20

16 mm² (4 mm × 4 mm)

Integrated Digital Front End
- Up to 400-kHz I 2C Bus Control
- 100-Byte Internal FIFO Interface
- Immersion TS5000-Compliant
- Optional Analog Inputs
High Voltage Piezo-Haptic Driver
- Drives up to 100 nF at 200 V PP and 300 Hz
- Drives up to 150 nF at 150 V PP and 300 Hz
- Drives up to 330 nF at 100 V PP and 300 Hz
- Drives up to 680 nF at 50 V PP and 300 Hz
- Differential Output
105-V Integrated Boost Converter
- Adjustable Boost Voltage
- Adjustable Boost Current Limit
- Integrated Power FET and Diode
- No Transformer Required
2-ms Fast Start Up Time
3.3- to 5.5-V Wide Supply Voltage Range
1.8-V Compatible, V DD Tolerant Digital Pins

Integrated Digital Front End
- Up to 400-kHz I 2C Bus Control
- 100-Byte Internal FIFO Interface
- Immersion TS5000-Compliant
- Optional Analog Inputs
High Voltage Piezo-Haptic Driver
- Drives up to 100 nF at 200 V PP and 300 Hz
- Drives up to 150 nF at 150 V PP and 300 Hz
- Drives up to 330 nF at 100 V PP and 300 Hz
- Drives up to 680 nF at 50 V PP and 300 Hz
- Differential Output
105-V Integrated Boost Converter
- Adjustable Boost Voltage
- Adjustable Boost Current Limit
- Integrated Power FET and Diode
- No Transformer Required
2-ms Fast Start Up Time
3.3- to 5.5-V Wide Supply Voltage Range
1.8-V Compatible, V DD Tolerant Digital Pins

The DRV2665 device is a piezo haptic driver with integrated 105-V boost switch, integrated power diode, integrated fully-differential amplifier, and integrated digital front end. This versatile device is capable of driving both high-voltage and low-voltage piezo haptic actuators. The input signal can be driven as haptic packets over the I 2C port or through the analog inputs.

The digital interface of the DRV2665 device is available through an I 2C compatible bus. A digital interface relieves the costly processor burden of the PWM generation or additional analog channel requirements in the host system. Any writes to the internal first-in, first-out buffer (FIFO) will automatically wake up the device and begin playing the waveform after the 2 ms internal start-up procedure. When the data flow stops or the FIFO under-runs, the DRV2665 device will automatically enter a pop-less shutdown procedure.

The boost voltage is set using two external resistors, and the boost current limit is programmable through the R EXT resistor. A typical start-up time of 2 ms makes the DRV2665 device an ideal piezo driver for fast haptic responses. Thermal overload protection prevents the device from being damaged when overdriven.

The DRV2665 device is a piezo haptic driver with integrated 105-V boost switch, integrated power diode, integrated fully-differential amplifier, and integrated digital front end. This versatile device is capable of driving both high-voltage and low-voltage piezo haptic actuators. The input signal can be driven as haptic packets over the I 2C port or through the analog inputs.

The digital interface of the DRV2665 device is available through an I 2C compatible bus. A digital interface relieves the costly processor burden of the PWM generation or additional analog channel requirements in the host system. Any writes to the internal first-in, first-out buffer (FIFO) will automatically wake up the device and begin playing the waveform after the 2 ms internal start-up procedure. When the data flow stops or the FIFO under-runs, the DRV2665 device will automatically enter a pop-less shutdown procedure.

The boost voltage is set using two external resistors, and the boost current limit is programmable through the R EXT resistor. A typical start-up time of 2 ms makes the DRV2665 device an ideal piezo driver for fast haptic responses. Thermal overload protection prevents the device from being damaged when overdriven.

filter

Buscar otro/a Drivers piezoeléctricos

Descargar Ver vídeo con transcripción Video

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 6

Documentación principal	Tipo	Título	Opciones de formato	Fecha
*	Hoja de datos	DRV2665 Piezo Haptic Driver with Integrated Boost Converter and Digital Front End datasheet (Rev. C)	PDF \| HTML	18/10/2022
	Nota sobre la aplicación	DRV8662, DRV2700, DRV2665, and DRV2667 Configuration Guide (Rev. A)	PDF \| HTML	8/12/2021
	Nota sobre la aplicación	Piezo Haptics With Integrated Waveforms: DRV2605L-Q1 and DRV2700		27/09/2017
	Product overview	Automotive Haptics Solutions		16/09/2013
	Product overview	Haptics: Touch feedback that really moves you (Rev. A)		8/01/2013
	Analog Design Journal	High-definition haptics: Feel the difference!		17/07/2012

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Controlador o biblioteca

DRV2665SW-LINUX — Controlador Linux para DRV2665

The Linux driver supports the DRV2665 haptic motor driver. The Linux driver supports communication through the I2C bus and interfaces with the input sub-system for a forced feedback response.