Inicio Interfaz Serializadores-deserializadores de alta velocidad Serializadores-deserializadores FPD-Link
Inicio
Interfaz
Serializadores-deserializadores de alta velocidad
Serializadores-deserializadores FPD-Link

DS90UB960-Q1

ACTIVO

Deserializador FPD-Link III con hub de cámara cuádruple de 2 MP y puertos de salida CSI-2 dobles

Haga su pedido ahora
Hoja de datos

DS90UB960-Q1

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Applications Advanced Driver Assistance Systems (ADAS) Input compatibility FPD-Link III LVDS Function Deserializer Output compatibility MIPI CSI-2 Color depth (bpp) 12 Features Low-EMI Point-to-Point Communication Signal conditioning Adaptive Equalizer EMI reduction BIST Diagnostics BIST Rating Automotive Operating temperature range (°C) -40 to 105 TI functional safety category Functional Safety-Capable
Applications Advanced Driver Assistance Systems (ADAS) Input compatibility FPD-Link III LVDS Function Deserializer Output compatibility MIPI CSI-2 Color depth (bpp) 12 Features Low-EMI Point-to-Point Communication Signal conditioning Adaptive Equalizer EMI reduction BIST Diagnostics BIST Rating Automotive Operating temperature range (°C) -40 to 105 TI functional safety category Functional Safety-Capable
VQFNP (RTD) 64 81 mm² (9 mm × 9 mm)
  • AEC-Q100 Qualified for Automotive Applications:
    • Device Temperature Grade 2: –40℃ to +105℃ Ambient Operating Temperature Range
  • Quad 4.16-Gbps Deserializer Hub Aggregates Data From up to 4 Sensors Simultaneously
  • Supports 2-Megapixel Sensors With Full HD 1080p Resolution at 60-Hz Frame Rate
  • Precise Multi-Camera Synchronization
  • MIPI D-PHY Version 1.2 / CSI-2 Version 1.3 Compliant
    • 2 × MIPI CSI-2 Output Ports
    • Supports 1, 2, 3, 4 Data Lanes per CSI-2 port
    • CSI-2 Data Rate Scalable for 400 Mbps / 800 Mbps / 1.2 Gbps / 1.5 Gbps / 1.6 Gbps per Data Lane
    • Port Replication Mode
  • Functional Safety-Capable

    • Documentation available to aid ISO 26262 system design

  • Ultra-Low Data and Control Path Latency
  • Supports Single-Ended Coaxial Including Power-over-Coax (PoC) or Shielded Twisted-Pair (STP) Cable
  • Adaptive Receive Equalization
  • Dual I2C Ports With Fast-Mode Plus up to 1 Mbps
  • Flexible GPIOs for Sensor Synchronization and Diagnostics
  • Compatible With DS90UB953-Q1, DS90UB935-Q1, DS90UB933-Q1 , DS90UB913A-Q1 Serializers
  • Internal Programmable Precision Frame Sync Generator
  • Line Fault Detection and Advanced Diagnostics
  • AEC-Q100 Qualified for Automotive Applications:
    • Device Temperature Grade 2: –40℃ to +105℃ Ambient Operating Temperature Range
  • Quad 4.16-Gbps Deserializer Hub Aggregates Data From up to 4 Sensors Simultaneously
  • Supports 2-Megapixel Sensors With Full HD 1080p Resolution at 60-Hz Frame Rate
  • Precise Multi-Camera Synchronization
  • MIPI D-PHY Version 1.2 / CSI-2 Version 1.3 Compliant
    • 2 × MIPI CSI-2 Output Ports
    • Supports 1, 2, 3, 4 Data Lanes per CSI-2 port
    • CSI-2 Data Rate Scalable for 400 Mbps / 800 Mbps / 1.2 Gbps / 1.5 Gbps / 1.6 Gbps per Data Lane
    • Port Replication Mode
  • Functional Safety-Capable

    • Documentation available to aid ISO 26262 system design

  • Ultra-Low Data and Control Path Latency
  • Supports Single-Ended Coaxial Including Power-over-Coax (PoC) or Shielded Twisted-Pair (STP) Cable
  • Adaptive Receive Equalization
  • Dual I2C Ports With Fast-Mode Plus up to 1 Mbps
  • Flexible GPIOs for Sensor Synchronization and Diagnostics
  • Compatible With DS90UB953-Q1, DS90UB935-Q1, DS90UB933-Q1 , DS90UB913A-Q1 Serializers
  • Internal Programmable Precision Frame Sync Generator
  • Line Fault Detection and Advanced Diagnostics

The DS90UB960-Q1 is a versatile sensor hub capable of connecting serialized sensor data received from four independent video data streams through a FPD-Link III interface. When paired with a DS90UB953-Q1 serializer, the DS90UB960-Q1 receives data from sensors such as imagers supporting full HD 1080p/2MP resolution at 60-Hz frame rates. Data is received and aggregated into a MIPI CSI-2 compliant output for interconnect to a downstream processor. A second MIPI CSI-2 output port is available to provide additional bandwidth, or offers a second replicated output for data-logging and parallel processing.

The DS90UB960-Q1 includes four FPD-Link III deserializers, each enabling a connection through cost-effective 50-Ω single-ended coaxial or 100-Ω differential STP cables. The receive equalizers automatically adapt to compensate for cable loss characteristics, including degradation over time.

Each of the FPD-Link III interfaces also includes a separate low latency bidirectional control channel that continuously conveys I2C, GPIOs, and other control information. General-purpose I/O signals such as those required for camera synchronization and diagnostics features also make use of this bidirectional control channel.

The DS90UB960-Q1 is AEC-Q100 qualified for automotive applications and is offered in a cost-effective and space-saving 64-pin VQFN package.

The DS90UB960-Q1 is a versatile sensor hub capable of connecting serialized sensor data received from four independent video data streams through a FPD-Link III interface. When paired with a DS90UB953-Q1 serializer, the DS90UB960-Q1 receives data from sensors such as imagers supporting full HD 1080p/2MP resolution at 60-Hz frame rates. Data is received and aggregated into a MIPI CSI-2 compliant output for interconnect to a downstream processor. A second MIPI CSI-2 output port is available to provide additional bandwidth, or offers a second replicated output for data-logging and parallel processing.

The DS90UB960-Q1 includes four FPD-Link III deserializers, each enabling a connection through cost-effective 50-Ω single-ended coaxial or 100-Ω differential STP cables. The receive equalizers automatically adapt to compensate for cable loss characteristics, including degradation over time.

Each of the FPD-Link III interfaces also includes a separate low latency bidirectional control channel that continuously conveys I2C, GPIOs, and other control information. General-purpose I/O signals such as those required for camera synchronization and diagnostics features also make use of this bidirectional control channel.

The DS90UB960-Q1 is AEC-Q100 qualified for automotive applications and is offered in a cost-effective and space-saving 64-pin VQFN package.
filter Buscar otro/a Serializadores-deserializadores FPD-Link
Descargar Ver vídeo con transcripción Video

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 17
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos DS90UB960-Q1 Quad 4.16-Gbps FPD-Link III Deserializer Hub With Dual MIPI CSI-2 Ports datasheet (Rev. D) PDF | HTML 26/09/2023
Nota sobre la aplicación Building Automotive 360-Degree Surround View Systems Using FPD-Link High-Speed SerDes PDF | HTML 16/07/2026
Nota sobre la aplicación Demystifying CSI-2 Aggregation Bandwidth for FPD-Link III Deserializers (Rev. B) PDF | HTML 13/07/2026
Nota sobre la aplicación FPD-Link ADAS Power-Over-Coax Design Guidelines (Rev. B) PDF | HTML 24/10/2025
Nota sobre la aplicación ADAS in-vehicle camera hot swap mechanism PDF | HTML 10/10/2025
Informe Multiplexing FPD-Link Serializer Deserializer (SerDes) (Rev. A) PDF | HTML 23/02/2024
Nota sobre la aplicación Developing Multiple-Camera Applications on AM6x (Rev. A) PDF | HTML 14/02/2024
Nota sobre la aplicación How to Design a FPD-Link III System Using DS90UB953-Q1 and DS90UB954-Q1 (Rev. A) PDF | HTML 13/06/2019
Nota sobre la aplicación Margin Analysis Program (MAP) and strobe positions for DS90UB954-Q1 and 960-Q1 14/01/2019
Guía del usuario FPD-Link Margin Analysis Program (MAP) user's guide 14/01/2019
Nota sobre la aplicación Power Over Coax Design Guidelines for DS90UB953-Q1 17/04/2018
Artículo técnico Next-generation FPD-Link III devices add speed and flexibility to Advanced Driver PDF | HTML 18/10/2017
Analog Design Journal An EMC/EMI system-design and testing methodology for FPD-Link III SerDes 26/04/2017
Artículo técnico Integrated smart sensor health monitoring for ADAS and autonomous driving PDF | HTML 10/11/2016
Analog Design Journal Ten tips for successfully designing with automotive EMC/EMI requirements 24/07/2015
Nota sobre la aplicación I2C Communication Over FPD-Link III with Bidirectional Control Channel (Rev. A) 26/04/2013
Nota sobre la aplicación I2C Communication over DS90UB913/4 FPD Link-III with BCC 22/04/2013

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

DS90UB960-Q1EVM — Módulo de evaluación de hub de deserializador FPD-Link III cuádruple con puertos MIPI CSI-2 dobles

El módulo de evaluación DS90UB960-Q1EVM de Texas Instruments es un diseño de placa funcional para evaluar el concentrador deserializador DS90UB960-Q1 FPD-Link III, que convierte los datos de sensores serializados a MIPI CSI-2 para su procesamiento. Está configurado para la comunicación con hasta (...)
Guía del usuario: PDF | HTML
Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Módulo óptico

ECON-3P-NEDUCAM — e-con Systems NeduCAM camera modules based on FPD-Link III serializers

NeduCAM is a product family of camera modules based combining various image sensors with an FPD-Link III serializer for supporting multiple remotely located cameras through serial connections to a host processor. 

NeduCAMxx products are the camera module only, which is a fully-assembled 2-board (...)

Desde: e-con Systems Inc.
Productos y hardware compatibles
Software de aplicación y estructura

ALP — Analog LaunchPad Framework Utility

To get started with Analog LaunchPad (ALP) software: Download and install the ALP Framework Utility. Add new device profiles and example scripts with the ALP-PROFILE-UPDATE tool.
Productos y hardware compatibles
Soporte de software

ALP-PROFILE-UPDATE — Analog LaunchPad Profile Update Software

ALP Profile Update contains latest fixes and updates to ALP profiles. If you are installing for the first time please install ALP Profile Update after installing ALP Framework.
Productos y hardware compatibles
Modelo de simulación

DS90UB960 IBIS Model (Rev. B)

SNLM218B.ZIP (110 KB) - Modelo IBIS
Productos y hardware compatibles
Diseño de referencia

TIDA-01323 — Diseño de referencia del centro de sensores múltiples ADAS con FPD-Link III cuádruple de 4 Gbps, dos

El diseño de referencia del concentrador de cámara TIDA-01323 permite la conexión de cuatro cámaras de hasta 2 megapíxeles y 60 fps a través de un cable coaxial. Este diseño utiliza estos cables coaxiales para proporcionar potencia, comunicación de canal de retorno y sincronización del reloj a los (...)
Productos y hardware compatibles
Diseño de referencia

TIDA-01413 — Diseño de ref. del centro de fusión de sensores de 8 canales ADAS c/2 deserializ. cuád. de 4 Gbps

Este diseño de referencia del centro de fusión de sensores permite la conexión de hasta cuatro cámaras de 2 megapíxeles y hasta cuatro módulos de radar a través de un cable coaxial. Este diseño utiliza estos cables coaxiales para proporcionar alimentación, comunicación de canal de retorno y (...)
Productos y hardware compatibles
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
VQFNP (RTD) 64 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos