F28M35M52C

ACTIVO

MCU C2000™ de doble núcleo de 32 bits con 150 MIPS y 1024 KB de memoria Flash

Detalles del producto

CPU 1 C28, 1 Cortex-M3 Frequency (MHz) 75 Flash memory (kByte) 1024 RAM (kByte) 136 ADC type 2 12-bit Total processing (MIPS) 150 UART 6 CAN (#) 2 Sigma-delta filter 0 PWM (Ch) 24 Number of ADC channels 20 Direct memory access (Ch) 1 32-ch DMA, 1 6-Ch DMA SPI 5 QEP 3 USB Yes Hardware accelerators Floating point unit Edge AI enabled Yes Operating temperature range (°C) -40 to 125 Rating Catalog Communication interface CAN, I2C, SPI, UART Operating system BareMetal (No OS), FreeRTOS, SafeRTOS Nonvolatile memory (kByte) 1024 Number of GPIOs 74 Number of I2Cs 2
CPU 1 C28, 1 Cortex-M3 Frequency (MHz) 75 Flash memory (kByte) 1024 RAM (kByte) 136 ADC type 2 12-bit Total processing (MIPS) 150 UART 6 CAN (#) 2 Sigma-delta filter 0 PWM (Ch) 24 Number of ADC channels 20 Direct memory access (Ch) 1 32-ch DMA, 1 6-Ch DMA SPI 5 QEP 3 USB Yes Hardware accelerators Floating point unit Edge AI enabled Yes Operating temperature range (°C) -40 to 125 Rating Catalog Communication interface CAN, I2C, SPI, UART Operating system BareMetal (No OS), FreeRTOS, SafeRTOS Nonvolatile memory (kByte) 1024 Number of GPIOs 74 Number of I2Cs 2
HTQFP (RFP) 144 484 mm² (22 mm × 22 mm)
  • Master Subsystem — Arm Cortex-M3
    • Up to 100 MHz
    • Embedded memory
      • Up to 512KB of flash (ECC)
      • Up to 32KB of RAM (ECC or parity)
      • Up to 64KB of shared RAM
      • 2KB of IPC Message RAM
    • Five Universal Asynchronous Receiver/Transmitters (UARTs)
    • Four Synchronous Serial Interfaces (SSIs) and a Serial Peripheral Interface (SPI)
    • Two Inter-integrated Circuits (I2Cs)
    • Universal Serial Bus On-the-Go (USB-OTG) + PHY
    • 10/100 ENET 1588 MII
    • Two Controller Area Network, D_CAN, modules (pin-bootable)
    • 32-channel Micro Direct Memory Access (µDMA)
    • Dual security zones (128-bit password per zone)
    • External Peripheral Interface (EPI)
    • Micro Cyclic Redundancy Check (µCRC) module
    • Four general-purpose timers
    • Two watchdog timer modules
    • Three external interrupts
    • Endianness: little endian
  • Clocking
    • On-chip crystal oscillator and external clock input
    • Dynamic Phase-Locked Loop (PLL) ratio changes supported
  • 1.2-V digital, 1.8-V analog, 3.3-V I/O design
  • Interprocessor Communications (IPC)
    • 32 handshaking channels
    • Four channels generate IPC interrupts
    • Can be used to coordinate transfer of data through IPC Message RAMs
  • Up to 74 individually programmable, multiplexed General-Purpose Input/Output (GPIO) pins
    • Glitch-free I/Os
  • Control Subsystem — TMS320C28x 32-bit CPU
    • Up to 150 MHz
    • C28x core hardware built-in self-test
    • Embedded memory
      • Up to 512KB of flash (ECC)
      • Up to 36KB of RAM (ECC or parity)
      • Up to 64KB of shared RAM
      • 2KB of IPC Message RAM
    • IEEE-754 single-precision Floating-Point Unit (FPU)
    • Viterbi, Complex Math, CRC Unit (VCU)
    • Serial Communications Interface (SCI)
    • SPI
    • I2C
    • 6-channel Direct Memory Access (DMA)
    • Nine Enhanced Pulse Width Modulator (ePWM) modules
      • 18 outputs (16 high-resolution)
    • Six 32-bit Enhanced Capture (eCAP) modules
    • Three 32-bit Enhanced Quadrature Encoder Pulse (eQEP) modules
    • Multichannel Buffered Serial Port (McBSP)
    • EPI
    • One security zone (128-bit password)
    • Three 32-bit timers
    • Endianness: little endian
  • Analog Subsystem
    • Dual 12-bit Analog-to-Digital Converters (ADCs)
    • Up to 2.88 MSPS
    • Up to 20 channels
    • Four Sample-and-Hold (S/H) circuits
    • Up to six comparators with 10-bit Digital-to-Analog Converter (DAC)
  • Package
    • 144-Pin RFP PowerPAD™ Thermally Enhanced Thin Quad Flatpack (HTQFP)
  • Temperature options:
    • T: –40°C to 105°C Junction
    • S: –40°C to 125°C Junction
    • Q: –40°C to 125°C Free-Air (AEC Q100 qualification for automotive applications)
  • Master Subsystem — Arm Cortex-M3
    • Up to 100 MHz
    • Embedded memory
      • Up to 512KB of flash (ECC)
      • Up to 32KB of RAM (ECC or parity)
      • Up to 64KB of shared RAM
      • 2KB of IPC Message RAM
    • Five Universal Asynchronous Receiver/Transmitters (UARTs)
    • Four Synchronous Serial Interfaces (SSIs) and a Serial Peripheral Interface (SPI)
    • Two Inter-integrated Circuits (I2Cs)
    • Universal Serial Bus On-the-Go (USB-OTG) + PHY
    • 10/100 ENET 1588 MII
    • Two Controller Area Network, D_CAN, modules (pin-bootable)
    • 32-channel Micro Direct Memory Access (µDMA)
    • Dual security zones (128-bit password per zone)
    • External Peripheral Interface (EPI)
    • Micro Cyclic Redundancy Check (µCRC) module
    • Four general-purpose timers
    • Two watchdog timer modules
    • Three external interrupts
    • Endianness: little endian
  • Clocking
    • On-chip crystal oscillator and external clock input
    • Dynamic Phase-Locked Loop (PLL) ratio changes supported
  • 1.2-V digital, 1.8-V analog, 3.3-V I/O design
  • Interprocessor Communications (IPC)
    • 32 handshaking channels
    • Four channels generate IPC interrupts
    • Can be used to coordinate transfer of data through IPC Message RAMs
  • Up to 74 individually programmable, multiplexed General-Purpose Input/Output (GPIO) pins
    • Glitch-free I/Os
  • Control Subsystem — TMS320C28x 32-bit CPU
    • Up to 150 MHz
    • C28x core hardware built-in self-test
    • Embedded memory
      • Up to 512KB of flash (ECC)
      • Up to 36KB of RAM (ECC or parity)
      • Up to 64KB of shared RAM
      • 2KB of IPC Message RAM
    • IEEE-754 single-precision Floating-Point Unit (FPU)
    • Viterbi, Complex Math, CRC Unit (VCU)
    • Serial Communications Interface (SCI)
    • SPI
    • I2C
    • 6-channel Direct Memory Access (DMA)
    • Nine Enhanced Pulse Width Modulator (ePWM) modules
      • 18 outputs (16 high-resolution)
    • Six 32-bit Enhanced Capture (eCAP) modules
    • Three 32-bit Enhanced Quadrature Encoder Pulse (eQEP) modules
    • Multichannel Buffered Serial Port (McBSP)
    • EPI
    • One security zone (128-bit password)
    • Three 32-bit timers
    • Endianness: little endian
  • Analog Subsystem
    • Dual 12-bit Analog-to-Digital Converters (ADCs)
    • Up to 2.88 MSPS
    • Up to 20 channels
    • Four Sample-and-Hold (S/H) circuits
    • Up to six comparators with 10-bit Digital-to-Analog Converter (DAC)
  • Package
    • 144-Pin RFP PowerPAD™ Thermally Enhanced Thin Quad Flatpack (HTQFP)
  • Temperature options:
    • T: –40°C to 105°C Junction
    • S: –40°C to 125°C Junction
    • Q: –40°C to 125°C Free-Air (AEC Q100 qualification for automotive applications)

The Concerto family is a multicore system-on-chip microcontroller unit (MCU) with independent communication and real-time control subsystems. The F28M35x family of devices is the first series in the Concerto family.

The communications subsystem is based on the industry-standard 32-bit Arm Cortex-M3 CPU and features a wide variety of communication peripherals, including Ethernet 1588, USB OTG with PHY, Controller Area Network (CAN), UART, SSI, I2C, and an external interface.

The real-time control subsystem is based on TI’s industry-leading proprietary 32-bit C28x floating-point CPU and features the most flexible and high-precision control peripherals, including ePWMs with fault protection, and encoders and captures—all as implemented by TI’s TMS320C2000™ Entry performance MCUs and Premium performance MCUs. In addition, the C28-CPU has been enhanced with the addition of the VCU instruction accelerator that implements efficient Viterbi, Complex Arithmetic, 16-bit FFTs, and CRC algorithms.

A high-speed analog subsystem and supplementary RAM memory is shared, along with on-chip voltage regulation and redundant clocking circuitry. Safety considerations also include Error Correction Code (ECC), parity, and code secure memory, as well as documentation to assist with system-level industrial safety certification.

The Concerto family is a multicore system-on-chip microcontroller unit (MCU) with independent communication and real-time control subsystems. The F28M35x family of devices is the first series in the Concerto family.

The communications subsystem is based on the industry-standard 32-bit Arm Cortex-M3 CPU and features a wide variety of communication peripherals, including Ethernet 1588, USB OTG with PHY, Controller Area Network (CAN), UART, SSI, I2C, and an external interface.

The real-time control subsystem is based on TI’s industry-leading proprietary 32-bit C28x floating-point CPU and features the most flexible and high-precision control peripherals, including ePWMs with fault protection, and encoders and captures—all as implemented by TI’s TMS320C2000™ Entry performance MCUs and Premium performance MCUs. In addition, the C28-CPU has been enhanced with the addition of the VCU instruction accelerator that implements efficient Viterbi, Complex Arithmetic, 16-bit FFTs, and CRC algorithms.

A high-speed analog subsystem and supplementary RAM memory is shared, along with on-chip voltage regulation and redundant clocking circuitry. Safety considerations also include Error Correction Code (ECC), parity, and code secure memory, as well as documentation to assist with system-level industrial safety certification.

Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Funcionalidad similar a la del dispositivo comparado
TMS320F28388D ACTIVO MCU C2000™ de 32 bits con gestor de conectividad, C28x+CLA CPU x2, Flash de 1.5 MB, FPU64, CLB, ENET This product is the latest powerful 32-bit floating-point microcontroller unit (MCU) designed for advanced closed-loop control.

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 18
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos F28M35x Concerto Microcontrollers datasheet (Rev. L) PDF | HTML 1/02/2021
* Guía del usuario TMS320C28x Extended Instruction Sets Technical Reference Manual (Rev. C) 29/10/2019
* Guía del usuario TMS320F28M35x and TMS320F28M36x Flash API Reference Guide (v1.53) (Rev. B) 16/01/2018
* Errata F28M35x Concerto™ MCUs Silicon Errata (Rev. P) PDF | HTML 23/06/2020
Nota sobre la aplicación Migrating Software From 8-Bit (Byte) Addressable CPU’s to C28x CPU (Rev. A) PDF | HTML 19/04/2023
Nota sobre la aplicación Calculating Useful Lifetimes of Embedded Processors (Rev. B) PDF | HTML 7/05/2019
Guía del usuario TMS320F28002x Flash API Version 1.57.00.00 3/03/2019
Nota sobre la aplicación MSL Ratings and Reflow Profiles (Rev. A) 13/12/2018
Nota sobre la aplicación Dual Motor Ctl Using FCL and Perf Analysis Using SFRA on TMS320F28379D LaunchPad (Rev. A) 20/03/2018
Guía del usuario Fast Current Loop (C28x) Library 6/03/2018
Nota sobre la aplicación Performance Analysis of Fast Current Loop (FCL) in Servo 6/03/2018
Guía del usuario Concerto F28M35x Technical Reference Manual (Rev. I) 27/02/2017
Guía del usuario TI-RTOS 2.20 User's Guide (Rev. M) 17/06/2016
Nota sobre la aplicación Calculator for CAN Bit Timing Parameters PDF | HTML 22/03/2016
Guía del usuario TMS320C28x DSP CPU and Instruction Set (Rev. F) 10/04/2015
Nota sobre la aplicación Calculating FIT for a Mission Profile 24/03/2015
Guía del usuario TMS320C28x Floating Point Unit and Instruction Set Reference Guide (Rev. B) 23/01/2014
Nota sobre la aplicación High Voltage Solar Inverter DC-AC Kit 9/07/2012

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TMDSDOCKH52C1 — Kit experimental H52C1 Concerto

The C2000 Experimenter Kits from Texas Instruments are ideal products for initial device exploration and testing. The Concerto H52C1 Experimenter Kit has a docking station that features access to all controlCARD signals, breadboard areas and RS-232 and JTAG connectors. Each kit contains a H52C1 (...)

Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Tarjeta secundaria

TMDSCNCDH52C1 — controlCARD H52C1 Concerto

The C2000 controlCARDs from Texas Instruments are ideal products for initial software development and short run builds for system prototypes, test stands, and many other projects that require easy access to high-performance controllers. The controlCARDs are complete board-level modules that utilize (...)

Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Sonda de depuración

TMDSEMU200-U — Sonda de depuración XDS200 USB

El XDS200 es una sonda de depuración (emulador) que se utiliza para depurar dispositivos integrados de TI. Para la mayoría de los dispositivos, se recomienda utilizar el XDS110 (www.ti.com/tool/TMDSEMU110-U), que es más nuevo y de menor costo. El XDS200 es compatible con una amplia variedad de (...)

Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Sonda de depuración

TMDSEMU560V2STM-U — Sonda de depuración USB para rastreo del sistema con el software XDS560™ v2

El XDS560v2 es el modelo de mayor rendimiento de la familia de sondas de depuración XDS560™ y es compatible tanto con el estándar JTAG tradicional (IEEE 1149.1) como con cJTAG (IEEE 1149.7).  Tenga en cuenta que no es compatible con la depuración por cable serie (SWD).

Todas las sondas de (...)

Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Sonda de depuración

TMDSEMU560V2STM-UE — Sonda de depuración USB y ethernet de seguimiento del sistema XDS560v2

The XDS560v2 is the highest performance of the XDS560™ family of debug probes and supports both the traditional JTAG standard (IEEE1149.1) and cJTAG (IEEE1149.7). Note that it does not support serial wire debug (SWD).

All XDS debug probes support Core and System Trace in all ARM and DSP processors (...)

Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Controlador o biblioteca

CONTROLSUITE — Paquete de software control SUITE™: Herramientas de software y desarrollo para microcontroladores C2

controlSUITE™ para microcontroladores C2000™ es un conjunto cohesivo de infraestructura de software, herramientas y documentación diseñado para minimizar el tiempo de desarrollo del sistema. Desde conductores específicos de dispositivos y software de soporte hasta ejemplos completos en sofisticadas (...)

lock = Requiere aprobación de exportación (1 minuto)
Productos y hardware compatibles
Firmware

USIT-3P-SECIC-HSM — Firmware Uni-Sentry SecIC-HSM

El SecIC-HSM está diseñado para cumplir con los requisitos de ciberseguridad necesarios para los chips MCU/SoC. El firmware HSM se puede aplicar en campos como automóviles, nuevas energías, fotovoltaica, robótica, salud y aviación. Las funciones de ciberseguridad proporcionadas disponibles incluyen (...)

Productos y hardware compatibles
Firmware

USIT-3P-SECIC-PQC — Firmware de algoritmos Uni-Sentry SecIC-PQC

Las soluciones de seguridad de Uni-Sentry adoptan algoritmos PQC capaces de resistir las amenazas de descifrado planteadas por los ordenadores cuánticos a los algoritmos criptográficos tradicionales. El firmware del PQC está cooptimizado con el Módulo de Seguridad de Hardware (HSM), aprovechando la (...)

Productos y hardware compatibles
Herramienta de programación de software

UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors

UniFlash forma parte del amplio ecosistema de desarrollo CCStudio™ de TI y es una herramienta de software diseñada para programar la memoria flash integrada en los microcontroladores y dispositivos de conectividad inalámbrica de TI, así como la memoria flash integrada en los procesadores de TI. (...)

Productos y hardware compatibles
Modelo de simulación

F28M35x RFP BSDL Model (Rev. A)

SPRM558A.ZIP (4 KB) - Modelo BSDL
Productos y hardware compatibles
Modelo de simulación

F28M35x RFP IBIS Model

SPRM557.ZIP (288 KB) - Modelo IBIS
Productos y hardware compatibles
Herramienta de diseño

C2000-3P-SEARCH — Herramienta de búsqueda de terceros de C2000

TI has partnered with multiple companies to offer a wide range of solutions and services for TI C2000 devices. These companies can accelerate your path to production using C2000 devices. Download this search tool to quickly browse third-party details and find the right third-party to meet your (...)

Productos y hardware compatibles
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
HTQFP (RFP) 144 Ultra Librarian

Pedidos y calidad

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos