MSP430FG4619

ACTIVO

MCU de 8 MHz con 120 KB Flash, 4 KB SRAM, 12 bit ADC, DAC doble, DMA, 3 OpAmp, LCD de 160 s

Detalles del producto

CPU MSP430 Frequency (MHz) 8 Flash memory (kByte) 120 RAM (kByte) 4 ADC type 12-bit SAR Features Advanced sensing, LCD, OpAmp, Real-time clock UART 1 Security Secure debug Number of ADC channels 12 SPI 1 USB No Operating temperature range (°C) -40 to 85 Rating Catalog Communication interface I2C, SPI, UART Operating system BareMetal (No OS), TI RTOS Hardware accelerators 0 Nonvolatile memory (kByte) 120 Number of GPIOs 80 Number of I2Cs 1
CPU MSP430 Frequency (MHz) 8 Flash memory (kByte) 120 RAM (kByte) 4 ADC type 12-bit SAR Features Advanced sensing, LCD, OpAmp, Real-time clock UART 1 Security Secure debug Number of ADC channels 12 SPI 1 USB No Operating temperature range (°C) -40 to 85 Rating Catalog Communication interface I2C, SPI, UART Operating system BareMetal (No OS), TI RTOS Hardware accelerators 0 Nonvolatile memory (kByte) 120 Number of GPIOs 80 Number of I2Cs 1
JRBGA (ZQW) 113 49 mm² (7 mm × 7 mm) LQFP (PZ) 100 256 mm² (16 mm × 16 mm) NFBGA (ZCA) 113 49 mm² (7 mm × 7 mm)
  • Low supply-voltage range: 1.8 V to 3.6 V
  • Ultra-low power consumption
    • Active mode: 400 µA at 1 MHz, 2.2 V
    • Standby mode: 1.3 µA
    • Off mode (RAM retention): 0.22 µA
  • Five power-saving modes
  • Wakeup from standby mode in less than 6 µs
  • 16-bit RISC architecture, extended memory, 125‑ns instruction cycle time
  • Three-channel internal DMA
  • 12-bit analog-to-digital converter (ADC) with internal reference, sample-and-hold and autoscan feature
  • Three configurable operational amplifiers
  • Dual 12-bit digital-to-analog converters (DACs) with synchronization
  • 16-bit Timer_A with three capture/compare registers
  • 16-bit Timer_B with seven capture/compare-with-shadow registers
  • On-chip comparator
  • Supply voltage supervisor and monitor with programmable level detection
  • Serial communication interface (USART1), select asynchronous UART or synchronous SPI by software
  • Universal serial communication interface
    • Enhanced UART supports automatic baud-rate detection
    • IrDA encoder and decoder
    • Synchronous SPI
    • I2C
  • Serial onboard programming, programmable code protection by security fuse
  • Brownout detector
  • Basic timer with real-time clock (RTC) feature
  • Integrated LCD driver up to 160 segments with regulated charge pump
  • Device Comparison summarizes the available family members
    • MSP430FG4616, MSP430FG4616,
      92KB+256B of flash or ROM,
      4KB of RAM
    • MSP430FG4617, MSP430CG4617,
      92KB+256B of flash or ROM,
      8KB of RAM
    • MSP430FG4618, MSP430CG4618,
      116KB+256B of flash or ROM,
      8KB of RAM
    • MSP430FG4619, MSP430CG4619,
      120KB+256B of flash or ROM,
      4KB of RAM
  • Low supply-voltage range: 1.8 V to 3.6 V
  • Ultra-low power consumption
    • Active mode: 400 µA at 1 MHz, 2.2 V
    • Standby mode: 1.3 µA
    • Off mode (RAM retention): 0.22 µA
  • Five power-saving modes
  • Wakeup from standby mode in less than 6 µs
  • 16-bit RISC architecture, extended memory, 125‑ns instruction cycle time
  • Three-channel internal DMA
  • 12-bit analog-to-digital converter (ADC) with internal reference, sample-and-hold and autoscan feature
  • Three configurable operational amplifiers
  • Dual 12-bit digital-to-analog converters (DACs) with synchronization
  • 16-bit Timer_A with three capture/compare registers
  • 16-bit Timer_B with seven capture/compare-with-shadow registers
  • On-chip comparator
  • Supply voltage supervisor and monitor with programmable level detection
  • Serial communication interface (USART1), select asynchronous UART or synchronous SPI by software
  • Universal serial communication interface
    • Enhanced UART supports automatic baud-rate detection
    • IrDA encoder and decoder
    • Synchronous SPI
    • I2C
  • Serial onboard programming, programmable code protection by security fuse
  • Brownout detector
  • Basic timer with real-time clock (RTC) feature
  • Integrated LCD driver up to 160 segments with regulated charge pump
  • Device Comparison summarizes the available family members
    • MSP430FG4616, MSP430FG4616,
      92KB+256B of flash or ROM,
      4KB of RAM
    • MSP430FG4617, MSP430CG4617,
      92KB+256B of flash or ROM,
      8KB of RAM
    • MSP430FG4618, MSP430CG4618,
      116KB+256B of flash or ROM,
      8KB of RAM
    • MSP430FG4619, MSP430CG4619,
      120KB+256B of flash or ROM,
      4KB of RAM

The TI MSP430™ family of ultra-low-power microcontrollers consists of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows the device to wake up from low-power modes to active mode in less than 6 µs.

The MSP430xG461x series are microcontroller configurations with two 16-bit timers, a high-performance 12-bit ADC, dual 12-bit DACs, three configurable operational amplifiers, one universal serial communication interface (USCI), one universal synchronous/asynchronous communication interface (USART), DMA, 80 I/O pins, and a segment liquid crystal display (LCD) driver with regulated charge pump.

For complete module descriptions, see the MSP430x4xx Family User’s Guide.

The TI MSP430™ family of ultra-low-power microcontrollers consists of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows the device to wake up from low-power modes to active mode in less than 6 µs.

The MSP430xG461x series are microcontroller configurations with two 16-bit timers, a high-performance 12-bit ADC, dual 12-bit DACs, three configurable operational amplifiers, one universal serial communication interface (USCI), one universal synchronous/asynchronous communication interface (USART), DMA, 80 I/O pins, and a segment liquid crystal display (LCD) driver with regulated charge pump.

For complete module descriptions, see the MSP430x4xx Family User’s Guide.

Descargar Ver vídeo con transcripción Video

Información importante

Estamos planeando la próxima generación de este producto. La nueva pieza aprovechará un encapsulado BGA laminado que denominamos nFBGA. Este encapsulado ofrece un rendimiento eléctrico equivalente al de la hoja de datos. También es equivalente a MicroStar en cuanto a diseño de placa/tamaño. Para más información, consulte esta nota de aplicación.

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Funcionalidad similar a la del dispositivo comparado
MSPM0L2227 ACTIVO MCU Arm® Cortex®-M0+ de 32 MHz c/mem. fl. de dob. ban., 128 KB, SRAM de 32 KB, ADC de 12 bits, CO 32-bit ARM Cortex-M0+ MCU for cost optimized designs.

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 34
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos MSP430FG461x, MSP430CG461x Mixed-Signal Microcontrollers datasheet (Rev. K) PDF | HTML 4/05/2020
* Errata MSP430FG4619 Microcontroller Errata (Rev. Q) PDF | HTML 24/06/2021
Nota sobre la aplicación Migration Guide From MSP430 MCUs to MSPM0 MCUs (Rev. B) PDF | HTML 2/06/2025
Nota sobre la aplicación Design Considerations When Using the MSP430 Graphics Library (Rev. A) PDF | HTML 9/08/2023
Nota sobre la aplicación Li-Ion Battery Charger Solution Using an MSP430™ MCU (Rev. B) PDF | HTML 1/04/2022
Nota sobre la aplicación ESD Diode Current Specification (Rev. B) PDF | HTML 23/08/2021
Guía del usuario MSP430 MCUs Development Guide Book (Rev. A) PDF | HTML 13/05/2021
Nota sobre la aplicación MSP430 System ESD Troubleshooting Guide PDF | HTML 13/12/2019
Nota sobre la aplicación Programming a Flash-Based MSP430 MCU Using the JTAG Interface (Rev. H) 15/03/2019
Nota sobre la aplicación Implementing IrDA With MSP430 MCUs (Rev. B) PDF | HTML 4/12/2018
Nota sobre la aplicación Interfacing the 3-V MSP430 MCU to 5-V Circuits (Rev. A) PDF | HTML 3/10/2018
Nota sobre la aplicación Understanding MSP430 Flash Data Retention (Rev. A) PDF | HTML 24/08/2018
Nota sobre la aplicación MSP430 Flash Memory Characteristics (Rev. B) PDF | HTML 24/08/2018
Nota sobre la aplicación Mixing C and Assembler With MSP430™ MCUs (Rev. A) PDF | HTML 7/08/2018
Nota sobre la aplicación Using the TPS3619 With MSP430 Microcontrollers (Rev. B) PDF | HTML 6/08/2018
Nota sobre la aplicación MSP430 LFXT1 Oscillator Accuracy (Rev. A) 3/08/2018
Nota sobre la aplicación Efficient Multiplication and Division Using MSP430 MCUs (Rev. A) 18/07/2018
Nota sobre la aplicación CRC Implementation with MSP430 MCUs (Rev. A) 21/06/2018
Nota sobre la aplicación Implementing a Direct Thermocouple Interface With the MSP430F4xx and ADS1240 (Rev. B) 29/05/2018
Nota sobre la aplicación Implementing An Ultra-Low-Power Keypad Interface With MSP430 MCUs (Rev. A) 22/05/2018
Nota sobre la aplicación Random Number Generation Using MSP430™ MCUs (Rev. A) 16/05/2018
Nota sobre la aplicación Wave Digital Filtering Using an MSP430 MCU (Rev. A) 16/05/2018
Nota sobre la aplicación Software Coding Techniques for MSP430™ MCUs (Rev. B) 14/03/2018
Nota sobre la aplicación MSP430 32-kHz Crystal Oscillators (Rev. D) PDF | HTML 18/07/2017
Nota sobre la aplicación Advanced Debugging Using the Enhanced Emulation Module (EEM) With CCS v6 (Rev. F) 6/09/2016
Nota sobre la aplicación General Oversampling of MSP ADCs for Higher Resolution (Rev. A) PDF | HTML 1/04/2016
Nota sobre la aplicación MSP Code Protection Features PDF | HTML 7/12/2015
Nota sobre la aplicación Designing With MSP430™ MCUs and Segment LCDs (Rev. A) PDF | HTML 20/07/2015
Informe Industrial Communications Solutions Featuring MSP Microcontrollers 26/01/2015
Guía del usuario MSP430x4xx Family User's Guide (Rev. L) 8/04/2013
Informe Power Management Solutions for Ultra-Low-Power 16-Bit MSP430 MCUs (Rev. D) 28/03/2012
Nota sobre la aplicación Powering the MSP430 from a High Voltage Input using the TPS62122 (Rev. C) 12/01/2012
Nota sobre la aplicación Tiny DCDC Converter Reference Design (Rev. A) 14/06/2010
Nota sobre la aplicación 1.8V – 5.5V Input, High-Efficiency DCDC Converter Reference Design for MSP430 (Rev. B) 14/06/2010

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

ALGO-3P-UISP1-TI — Programador Algocraft μISP1 para dispositivos Texas Instruments

μISP puede funcionar conectado a un PC host (conexiones RS-232, USB y LAN integradas) o en modo independiente.

La ejecución del ciclo de programación en modo independiente puede ocurrir simplemente pulsando el botón de START o a través de algunas líneas de control TTL.

Su tamaño compacto y (...)

Desde: Algocraft
Productos y hardware compatibles
Kit de desarrollo

MSP-TS430PZ100 — MSP-TS430PZ100 - Placa de desarrollo destino de 100 pines para MCU MSP430F4x

The MSP-TS430PZ100 is a standalone ZIF socket target board used to program and debug the MSP430 MCU in-system through the JTAG interface or the Spy Bi-Wire (2-wire JTAG) protocol. A USB connector is included on the board.

Device Support: The MSP-TS430PZ100 development board supports MSP430F43x, (...)

Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Herramienta de programación de hardware

MSP-FET — Programador y depurador de MSP MCU

El MSP-FET es una potente herramienta de desarrollo de emulación, a menudo llamada sonda de depuración, que permite a los usuarios comenzar a desarrollar rápidamente en microcontroladores (MCU) de baja potencia de MSP.

Admite la programación y la depuración en tiempo real a través de las interfaces (...)

Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Herramienta de programación de hardware

ALGO-3P-WRITENOW — Algocraft WriteNow! Programador

¡WriteNow! La serie de programadores en sistema supone un gran avance en el sector de la programación. Los programadores son compatibles con un gran número de dispositivos (microcontroladores, memorias, CPLD y otros dispositivos programables) de diversos fabricantes y tienen un tamaño compacto que (...)

Desde: Algocraft
Productos y hardware compatibles
Kit de desarrollo de software (SDK)

MSP430-SDK — MSP430-SDK para microcontroladores MSP430

MSP430-SDK es una colección de recursos que ayudan a los usuarios a escribir código eficaz para los microcontroladores (MCU) MSP430. Estos recursos son compatibles con TODOS los microcontroladores MSP430. Como mencionó un usuario: “Es esencialmente todo lo que los desarrolladores necesitan para (...)

Productos y hardware compatibles
IDE, configuración, compilador o depurador

CCSTUDIO — Code Composer Studio™ integrated development environment (IDE)

CCStudio™ IDE is part of TI's extensive CCStudio™ development ecosystem and is an integrated development environment for TI's microcontrollers, processors, wireless connectivity devices, and radar sensors. CCStudio IDE is available as desktop or cloud-based applications. The cloud version (...)

Productos y hardware compatibles
IDE, configuración, compilador o depurador

ENERGYTRACE — Tecnología EnergyTrace

EnergyTrace™ software for MSP430™ MCUs, MSP432™ MCUs, CC13xx wireless MCUs and CC26xx wireless MCUs is an energy-based code analysis tool that measures and displays the energy profile of an application and helps optimize it for ultra-low-power consumption.

As most developers know, it is difficult (...)

Productos y hardware compatibles
IDE, configuración, compilador o depurador

IAR-KICKSTART — IAR Embedded Workbench

IAR Embedded Workbench delivers a complete development toolchain for building and debugging embedded applications for your selected target microcontroller. The included IAR C/C++ Compiler generates highly optimized code for your application, and the C-SPY Debugger is a fully integrated debugger for (...)

Desde: IAR Systems
Productos y hardware compatibles
Capacitación en línea

MSP430-ACADEMY — MSP430™ academy

MSP430™ Academy delivers easy-to-use training modules that span a wide range of topics and LaunchPads in the MSP430 MCU portfolio.
Productos y hardware compatibles
Primeros pasos

TI-DEVELOPER-ZONE — Start embedded development on your desktop or in the cloud

From evaluation to deployment the TI Developer Zone provides a comprehensive range of software, tools and training to ensure that you have everything you need for each stage of the development process.
Productos y hardware compatibles
Sistema operativo (SO)

WHIS-3P-SAFERTOS — RTOS de seguridad precertificado SAFERTOS de WITTENSTEIN

SAFERTOS® es un sistema operativo único en tiempo real diseñado para procesadores integrados. Está precertificado según las normas IEC 61508 SIL3 e ISO 26262 ASILD por TÜV SÜD. SAFERTOS® se diseñó específicamente para la seguridad por el equipo de expertos de WHIS y se usa globalmente en (...)

Productos y hardware compatibles
Ejemplo de código o demostración

SLAC118 — MSP430FG461x Code Examples

Productos y hardware compatibles
Controlador o biblioteca

MSP-DSPLIB — Digital Signal Processing (DSP) Library for MSP Microcontrollers

La biblioteca de procesamiento de señal digitale de TI MSP430™ es un conjunto de funciones optimizadas para realizar operaciones comunes de procesamiento de señales para microcontroladores MSP430. Estas funciones se utilizan en aplicaciones en las que se realizan transformaciones de procesamiento (...)

Productos y hardware compatibles
Controlador o biblioteca

MSP-GRLIB — MSP Graphics Library

The MSP Graphics Library is a royalty-free set of graphics primitives for displaying images or creating graphical user interfaces (GUIs) on MSP430 and MSP432 microcontroller-based boards that use a graphical display. The graphics library consists of two functional layers: 1) the display driver (...)

Productos y hardware compatibles
Herramienta de programación de software

MSP-GANG-SOFTWARE — MSP-GANG Software

The MSP Gang Programmer (MSP-GANG) is a MSPM0/MSP430/MSP432 device programmer that can program up to eight identical devices at the same time.
Productos y hardware compatibles
Herramienta de programación de software

MSP430-FLASHER — Command Line Programmer for MSP430™ and SimpleLink™ MSP432™ MCUs

MSPFlasher es una interfaz de código abierto basada en shell (línea de comandos) para programar microcontroladores (MCU) MSP430™ y MSP432™ a través de JTAG, y proporciona las funciones de programación más comunes. MSP Flasher se puede utilizar para descargar archivos binarios directamente a la (...)

Productos y hardware compatibles
Herramienta de programación de software

UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors

UniFlash forma parte del amplio ecosistema de desarrollo CCStudio™ de TI y es una herramienta de software diseñada para programar la memoria flash integrada en los microcontroladores y dispositivos de conectividad inalámbrica de TI, así como la memoria flash integrada en los procesadores de TI. (...)

Productos y hardware compatibles
Modelo de simulación

MSP430 Op Amp (OA) Module SPICE/TINA Models

SLAM087.ZIP (43 KB) - Modelo TINA-TI Spice
Productos y hardware compatibles
Herramienta de diseño

MSP-3P-SEARCH — Herramienta de búsqueda de terceros de MSP

TI has partnered with multiple companies to offer a wide range of solutions and services for TI MSP devices. These companies can accelerate your path to production using MSP devices. Download this search tool to quickly browse third-party details and find the right third-party to meet your needs.

(...)

Productos y hardware compatibles
Diseño de referencia

TIDM-LOWEND-IHD — Pantalla en el hogar de gama baja basada en LCD segmentada con comunicación de RF inalámbrica

Una pantalla en el hogar (IHD) que permite a los clientes de servicios públicos realizar un seguimiento de su información sobre el uso de energía, como el consumo total de energía, los precios y los kilovatios hora en tiempo real. La pantalla puede comunicarse con medidores de servicios públicos y (...)

Productos y hardware compatibles
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
JRBGA (ZQW) 113 Ultra Librarian
LQFP (PZ) 100 Ultra Librarian
NFBGA (ZCA) 113 Ultra Librarian

Pedidos y calidad

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos