MSP430G2102

ACTIVO

MCU de 16 MHz con 1 KB Flash, 128B SRAM, SPI/I2C, temporizador

Se encuentra disponible una versión más nueva de este producto

open-in-new Comparar alternativas
Funcionalidad similar a la del dispositivo comparado
MSPM0C1104 ACTIVO MCU Arm® Cortex®-M0+ de 24 MHz con memoria flash de 16 KB, 1 KB de SRAM y ADC de 12 bits 32-bit ARM Cortex-M0+ MCU for cost optimized designs

Detalles del producto

CPU MSP430 Frequency (MHz) 16 Flash memory (kByte) 1 RAM (kByte) 0.125 Features Real-time clock, Spy-bi-wire, Watchdog timer UART 0 Security Secure debug Number of ADC channels 0 SPI 1 USB No Hardware accelerators 0 Operating temperature range (°C) -40 to 85 Rating Catalog Communication interface I2C, SPI Operating system BareMetal (No OS), TI RTOS Nonvolatile memory (kByte) 1 Number of GPIOs 16 Number of I2Cs 1
CPU MSP430 Frequency (MHz) 16 Flash memory (kByte) 1 RAM (kByte) 0.125 Features Real-time clock, Spy-bi-wire, Watchdog timer UART 0 Security Secure debug Number of ADC channels 0 SPI 1 USB No Hardware accelerators 0 Operating temperature range (°C) -40 to 85 Rating Catalog Communication interface I2C, SPI Operating system BareMetal (No OS), TI RTOS Nonvolatile memory (kByte) 1 Number of GPIOs 16 Number of I2Cs 1
TSSOP (PW) 14 32 mm² (5 mm × 6.4 mm) PDIP (N) 20 228.702 mm² (24.33 mm × 9.4 mm) VQFN (RSA) 16 16 mm² (4 mm × 4 mm) TSSOP (PW) 20 41.6 mm² (6.5 mm × 6.4 mm)
  • Low Supply Voltage Range: 1.8 V to 3.6 V
  • Ultra-Low Power Consumption
    • Active Mode: 220 µA at 1 MHz, 2.2 V
    • Standby Mode: 0.5 µA
    • Off Mode (RAM Retention): 0.1 µA
  • Five Power-Saving Modes
  • Ultra-Fast Wake-Up From Standby Mode in Less Than 1 µs
  • 16-Bit RISC Architecture, 62.5-ns Instruction Cycle Time
  • Basic Clock Module Configurations
    • Internal Frequencies up to 16 MHz With Four Calibrated Frequencies
    • Internal Very-Low-Power Low-Frequency (LF) Oscillator
    • 32-kHz Crystal
    • External Digital Clock Source
  • One 16-Bit Timer_A With Three Capture/Compare Registers
  • Up to 16 Capacitive-Touch Enabled I/O Pins
  • Universal Serial Interface (USI) Supporting SPI and I2C
  • 10-Bit 200-ksps Analog-to-Digital (A/D) Converter With Internal Reference, Sample-and-Hold, and Autoscan (MSP430G2x32 Only)
  • Brownout Detector
  • Serial Onboard Programming, No External Programming Voltage Needed, Programmable Code Protection by Security Fuse
  • On-Chip Emulation Logic With Spy-Bi-Wire Interface
  • Package Options
    • TSSOP: 14 Pin, 20 Pin
    • PDIP: 20 Pin
    • QFN: 16 Pin

All trademarks are the property of their respective owners.

  • Low Supply Voltage Range: 1.8 V to 3.6 V
  • Ultra-Low Power Consumption
    • Active Mode: 220 µA at 1 MHz, 2.2 V
    • Standby Mode: 0.5 µA
    • Off Mode (RAM Retention): 0.1 µA
  • Five Power-Saving Modes
  • Ultra-Fast Wake-Up From Standby Mode in Less Than 1 µs
  • 16-Bit RISC Architecture, 62.5-ns Instruction Cycle Time
  • Basic Clock Module Configurations
    • Internal Frequencies up to 16 MHz With Four Calibrated Frequencies
    • Internal Very-Low-Power Low-Frequency (LF) Oscillator
    • 32-kHz Crystal
    • External Digital Clock Source
  • One 16-Bit Timer_A With Three Capture/Compare Registers
  • Up to 16 Capacitive-Touch Enabled I/O Pins
  • Universal Serial Interface (USI) Supporting SPI and I2C
  • 10-Bit 200-ksps Analog-to-Digital (A/D) Converter With Internal Reference, Sample-and-Hold, and Autoscan (MSP430G2x32 Only)
  • Brownout Detector
  • Serial Onboard Programming, No External Programming Voltage Needed, Programmable Code Protection by Security Fuse
  • On-Chip Emulation Logic With Spy-Bi-Wire Interface
  • Package Options
    • TSSOP: 14 Pin, 20 Pin
    • PDIP: 20 Pin
    • QFN: 16 Pin

All trademarks are the property of their respective owners.

The Texas Instruments MSP430 family of ultra-low-power microcontrollers consist of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low-power modes is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 1 µs.

The MSP430G2x32 and MSP430G2x02 series of microcontrollers are ultra-low-power mixed signal microcontrollers with built-in 16-bit timers, and up to 16 I/O capacitive-touch enabled pins and built-in communication capability using the universal serial communication interface. The MSP430G2x32 series have a 10-bit A/D converter. For configuration details, see . Typical applications include low-cost sensor systems that capture analog signals, convert them to digital values, and then process the data for display or for transmission to a host system.

The Texas Instruments MSP430 family of ultra-low-power microcontrollers consist of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low-power modes is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 1 µs.

The MSP430G2x32 and MSP430G2x02 series of microcontrollers are ultra-low-power mixed signal microcontrollers with built-in 16-bit timers, and up to 16 I/O capacitive-touch enabled pins and built-in communication capability using the universal serial communication interface. The MSP430G2x32 series have a 10-bit A/D converter. For configuration details, see . Typical applications include low-cost sensor systems that capture analog signals, convert them to digital values, and then process the data for display or for transmission to a host system.

Descargar Ver vídeo con transcripción Video

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 40
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos MSP430G2x32, MSP430G2x02 Mixed Signal Microcontroller datasheet (Rev. H) 1/05/2013
* Guía del usuario MSP430F2xx, MSP430G2xx Family User's Guide (Rev. K) PDF | HTML 25/08/2022
* Errata MSP430G2102 Microcontroller Errata (Rev. J) PDF | HTML 28/06/2021
Nota sobre la aplicación Migration Guide From MSP430 MCUs to MSPM0 MCUs (Rev. B) PDF | HTML 2/06/2025
Nota sobre la aplicación QFN and SON PCB Attachment (Rev. C) PDF | HTML 6/12/2023
Nota sobre la aplicación Design Considerations When Using the MSP430 Graphics Library (Rev. A) PDF | HTML 9/08/2023
Nota sobre la aplicación Li-Ion Battery Charger Solution Using an MSP430™ MCU (Rev. B) PDF | HTML 1/04/2022
Nota sobre la aplicación ESD Diode Current Specification (Rev. B) PDF | HTML 23/08/2021
Nota sobre la aplicación Migrating from MSP430 F2xx and G2xx families to MSP430 FR4xx and FR2xx family (Rev. G) PDF | HTML 2/08/2021
Guía del usuario MSP430 MCUs Development Guide Book (Rev. A) PDF | HTML 13/05/2021
Nota sobre la aplicación MSP430 System ESD Troubleshooting Guide PDF | HTML 13/12/2019
Nota sobre la aplicación Programming a Flash-Based MSP430 MCU Using the JTAG Interface (Rev. H) 15/03/2019
Nota sobre la aplicación Interfacing the 3-V MSP430 MCU to 5-V Circuits (Rev. A) PDF | HTML 3/10/2018
Nota sobre la aplicación Understanding MSP430 Flash Data Retention (Rev. A) PDF | HTML 24/08/2018
Nota sobre la aplicación MSP430 Flash Memory Characteristics (Rev. B) PDF | HTML 24/08/2018
Nota sobre la aplicación Mixing C and Assembler With MSP430™ MCUs (Rev. A) PDF | HTML 7/08/2018
Nota sobre la aplicación Using the TPS3619 With MSP430 Microcontrollers (Rev. B) PDF | HTML 6/08/2018
Nota sobre la aplicación MSP430 LFXT1 Oscillator Accuracy (Rev. A) 3/08/2018
Nota sobre la aplicación Efficient Multiplication and Division Using MSP430 MCUs (Rev. A) 18/07/2018
Nota sobre la aplicación CRC Implementation with MSP430 MCUs (Rev. A) 21/06/2018
Nota sobre la aplicación Implementing An Ultra-Low-Power Keypad Interface With MSP430 MCUs (Rev. A) 22/05/2018
Nota sobre la aplicación Random Number Generation Using MSP430™ MCUs (Rev. A) 16/05/2018
Nota sobre la aplicación Wave Digital Filtering Using an MSP430 MCU (Rev. A) 16/05/2018
Nota sobre la aplicación Software Coding Techniques for MSP430™ MCUs (Rev. B) 14/03/2018
Nota sobre la aplicación MSP430 32-kHz Crystal Oscillators (Rev. D) PDF | HTML 18/07/2017
Informe Capacitive Touch and MSP Microcontrollers (Rev. A) 27/04/2017
Nota sobre la aplicación Migrating from the MSP430F2xx,G2xx Family to the MSP430FR58xx/FR59xx/68xx/69xx (Rev. E) PDF | HTML 3/11/2016
Nota sobre la aplicación Advanced Debugging Using the Enhanced Emulation Module (EEM) With CCS v6 (Rev. F) 6/09/2016
Información sobre seguridad funcional Safety Manual for MSP430G2xx, F5xx, and FR57xx in IEC 60730 Safety Applications (Rev. A) 12/01/2016
Nota sobre la aplicación MSP Code Protection Features PDF | HTML 7/12/2015
Guía del usuario MSP-TouchPro GUI User Guide (Rev. E) 2/10/2015
Nota sobre la aplicación 1-uA Capacitive Grip Detection Based on MSP430 Microcontrollers (Rev. B) 14/08/2013
Guía del usuario MSP430 Capacitive Touch Power Designer GUI User's Guide 21/05/2013
Nota sobre la aplicación Digital Addressable Lighting Interface (DALI) Using MSP430 Value Line (Rev. A) 18/10/2012
Nota sobre la aplicación MSP430 Microcontroller Based Solar LED Lantern-Boost Topology 2/07/2012
Informe Power Management Solutions for Ultra-Low-Power 16-Bit MSP430 MCUs (Rev. D) 28/03/2012
Nota sobre la aplicación Powering the MSP430 from a High Voltage Input using the TPS62122 (Rev. C) 12/01/2012
Nota sobre la aplicación Using the Real-Time-Clock Library (Rev. A) 11/01/2011
Nota sobre la aplicación Tiny DCDC Converter Reference Design (Rev. A) 14/06/2010
Nota sobre la aplicación 1.8V – 5.5V Input, High-Efficiency DCDC Converter Reference Design for MSP430 (Rev. B) 14/06/2010

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

ALGO-3P-UISP1-TI — Programador Algocraft μISP1 para dispositivos Texas Instruments

μISP puede funcionar conectado a un PC host (conexiones RS-232, USB y LAN integradas) o en modo independiente.

La ejecución del ciclo de programación en modo independiente puede ocurrir simplemente pulsando el botón de START o a través de algunas líneas de control TTL.

Su tamaño compacto y (...)

Desde: Algocraft
Productos y hardware compatibles
Kit de desarrollo

MSP-TS430PW14 — MSP-TS430PW14 - Placa de desarrollo destino de 14 pines para MCU MSP430F2x y MSP430G2x

The MSP-TS430PW14 is a standalone ZIF socket target board used to program and debug the MSP430 in-system through the JTAG interface or the Spy Bi-Wire (2-wire JTAG) protocol. The development board supports some MSP430 Flash parts in a 14-pin TSSOP package (TI package code: PW). Please check your (...)

Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Kit de desarrollo

MSP-TS430PW28A — MSP-TS430PW28A - Placa de desarrollo destino de 28 pines para MCU MSP430F2x y MSP430G2x

The MSP-TS430PW28A is a standalone ZIF socket target board used to program and debug the MSP430 in-system through the JTAG interface or the Spy Bi-Wire (2-wire JTAG) protocol. The development board supports some MSP430F Flash parts in a 20- or 28-pin TSSOP package (TI package code: PW). Please (...)

Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Herramienta de programación de hardware

MSP-FET — Programador y depurador de MSP MCU

El MSP-FET es una potente herramienta de desarrollo de emulación, a menudo llamada sonda de depuración, que permite a los usuarios comenzar a desarrollar rápidamente en microcontroladores (MCU) de baja potencia de MSP.

Admite la programación y la depuración en tiempo real a través de las interfaces (...)

Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Herramienta de programación de hardware

ALGO-3P-WRITENOW — Algocraft WriteNow! Programador

¡WriteNow! La serie de programadores en sistema supone un gran avance en el sector de la programación. Los programadores son compatibles con un gran número de dispositivos (microcontroladores, memorias, CPLD y otros dispositivos programables) de diversos fabricantes y tienen un tamaño compacto que (...)

Desde: Algocraft
Productos y hardware compatibles
Kit de desarrollo de software (SDK)

MSP430-SDK — MSP430-SDK para microcontroladores MSP430

MSP430-SDK es una colección de recursos que ayudan a los usuarios a escribir código eficaz para los microcontroladores (MCU) MSP430. Estos recursos son compatibles con TODOS los microcontroladores MSP430. Como mencionó un usuario: “Es esencialmente todo lo que los desarrolladores necesitan para (...)

Productos y hardware compatibles
IDE, configuración, compilador o depurador

CCSTUDIO — Code Composer Studio™ integrated development environment (IDE)

CCStudio™ IDE is part of TI's extensive CCStudio™ development ecosystem and is an integrated development environment for TI's microcontrollers, processors, wireless connectivity devices, and radar sensors. CCStudio IDE is available as desktop or cloud-based applications. The cloud version (...)

Productos y hardware compatibles
IDE, configuración, compilador o depurador

ENERGIA — Energia

Energia is an open source & community-driven integrated development environment (IDE) & software framework. Based on the Wiring framework, Energia provides an intuitive coding environment as well as a robust framework of easy-to-use functional APIs & libraries for programming a (...)

Productos y hardware compatibles
IDE, configuración, compilador o depurador

ENERGYTRACE — Tecnología EnergyTrace

EnergyTrace™ software for MSP430™ MCUs, MSP432™ MCUs, CC13xx wireless MCUs and CC26xx wireless MCUs is an energy-based code analysis tool that measures and displays the energy profile of an application and helps optimize it for ultra-low-power consumption.

As most developers know, it is difficult (...)

Productos y hardware compatibles
IDE, configuración, compilador o depurador

IAR-KICKSTART — IAR Embedded Workbench

IAR Embedded Workbench delivers a complete development toolchain for building and debugging embedded applications for your selected target microcontroller. The included IAR C/C++ Compiler generates highly optimized code for your application, and the C-SPY Debugger is a fully integrated debugger for (...)

Desde: IAR Systems
Productos y hardware compatibles
Capacitación en línea

MSP430-ACADEMY — MSP430™ academy

MSP430™ Academy delivers easy-to-use training modules that span a wide range of topics and LaunchPads in the MSP430 MCU portfolio.
Productos y hardware compatibles
Primeros pasos

TI-DEVELOPER-ZONE — Start embedded development on your desktop or in the cloud

From evaluation to deployment the TI Developer Zone provides a comprehensive range of software, tools and training to ensure that you have everything you need for each stage of the development process.
Productos y hardware compatibles
Sistema operativo (SO)

WHIS-3P-SAFERTOS — RTOS de seguridad precertificado SAFERTOS de WITTENSTEIN

SAFERTOS® es un sistema operativo único en tiempo real diseñado para procesadores integrados. Está precertificado según las normas IEC 61508 SIL3 e ISO 26262 ASILD por TÜV SÜD. SAFERTOS® se diseñó específicamente para la seguridad por el equipo de expertos de WHIS y se usa globalmente en (...)

Productos y hardware compatibles
Ejemplo de código o demostración

SLAC467 — MSP430G2x02, MSP430G2x12, MSP430G2x32, MSP430G2x52 Code Examples

Productos y hardware compatibles
Controlador o biblioteca

MSP-DSPLIB — Digital Signal Processing (DSP) Library for MSP Microcontrollers

La biblioteca de procesamiento de señal digitale de TI MSP430™ es un conjunto de funciones optimizadas para realizar operaciones comunes de procesamiento de señales para microcontroladores MSP430. Estas funciones se utilizan en aplicaciones en las que se realizan transformaciones de procesamiento (...)

Productos y hardware compatibles
Controlador o biblioteca

MSP-GRLIB — MSP Graphics Library

The MSP Graphics Library is a royalty-free set of graphics primitives for displaying images or creating graphical user interfaces (GUIs) on MSP430 and MSP432 microcontroller-based boards that use a graphical display. The graphics library consists of two functional layers: 1) the display driver (...)

Productos y hardware compatibles
Herramienta de programación de software

MSP430-FLASHER — Command Line Programmer for MSP430™ and SimpleLink™ MSP432™ MCUs

MSPFlasher es una interfaz de código abierto basada en shell (línea de comandos) para programar microcontroladores (MCU) MSP430™ y MSP432™ a través de JTAG, y proporciona las funciones de programación más comunes. MSP Flasher se puede utilizar para descargar archivos binarios directamente a la (...)

Productos y hardware compatibles
Herramienta de programación de software

UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors

UniFlash forma parte del amplio ecosistema de desarrollo CCStudio™ de TI y es una herramienta de software diseñada para programar la memoria flash integrada en los microcontroladores y dispositivos de conectividad inalámbrica de TI, así como la memoria flash integrada en los procesadores de TI. (...)

Productos y hardware compatibles
Herramienta de diseño

MSP-3P-SEARCH — Herramienta de búsqueda de terceros de MSP

TI has partnered with multiple companies to offer a wide range of solutions and services for TI MSP devices. These companies can accelerate your path to production using MSP devices. Download this search tool to quickly browse third-party details and find the right third-party to meet your needs.

(...)

Productos y hardware compatibles
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
TSSOP (PW) 14 Ultra Librarian
PDIP (N) 20 Ultra Librarian
VQFN (RSA) 16 Ultra Librarian
TSSOP (PW) 20 Ultra Librarian

Pedidos y calidad

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Serie de videos

Ver todos los videos

Videos