TPS51117

Name: TPS51117
Brand: TI
SKU: TPS51117
Price: 0.792 USD

ACTIVO

Controlador reductor D-CAP síncrono de 1.8 V a 28 V con una ligera eficiencia de carga

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat TPS51117 Single Synchronous Step-Down Controller datasheet (Rev. C) (Inglés) PDF | HTML

Se encuentra disponible una versión más nueva de este producto

open-in-new

Comparar alternativas

Funcionalidad similar a la del dispositivo comparado

TPS51388

ACTIVO

Convertidor buck síncrono de 12 A y entrada de 4.5 V a 24 V con salida ajustable Higher Efficiency and integrated FETs for smaller solution size

TPS51117

ACTIVO

Hoja de datos

Haga su pedido ahora

Detalles del producto

Rating

Catalog

Topology

Buck

Iout (max) (A)

10

Vin (max) (V)

28

Vin (min) (V)

1.8

Vout (max) (V)

5.5

Vout (min) (V)

0.76

Control mode

D-CAP

Features

Enable, Power good, Prebias startup, Synchronous rectification

Operating temperature range (°C)

-40 to 85

Iq (typ) (µA)

400

Duty cycle (max) (%)

95

Number of phases

1

Rating

Catalog

Topology

Buck

Iout (max) (A)

10

Vin (max) (V)

28

Vin (min) (V)

1.8

Vout (max) (V)

5.5

Vout (min) (V)

0.76

Control mode

D-CAP

Features

Enable, Power good, Prebias startup, Synchronous rectification

Operating temperature range (°C)

-40 to 85

Iq (typ) (µA)

400

Duty cycle (max) (%)

95

Number of phases

1

TSSOP (PW)

14

32 mm² 5 x 6.4

VQFN (RGY)

14

12.25 mm² 3.5 x 3.5

High Efficiency, Low Power Consumption, 4.5-µA
Typical Shutdown Current
Fixed Frequency Emulated On-Time Control,
Adjustable from 100 kHz to 550 kHz
D-CAP™ Mode With 100-ns Load Step Response
< 1% Initial Reference Accuracy
Output Voltage Range: 0.75 V to 5.5 V
Wide Input Voltage Range: 1.8 V to 28 V
Selectable Auto-Skip/PWM-Only Operation
Temperature Compensated (4500 ppm/°C)
Low-Side R_DS(on) Overcurrent Sensing
Negative Overcurrent Limit
Integrated Boost Diode
Integrated OVP/UVP and Thermal Shutdown
Powergood Signal
Internal 1.2-ms Voltage Soft-Start
Integrated Output Discharge (Soft-Stop)
APPLICATIONS
- Notebook Computers
- I/O Supplies
- System Power Supplies

All other trademarks are the property of their respective owners

High Efficiency, Low Power Consumption, 4.5-µA
Typical Shutdown Current
Fixed Frequency Emulated On-Time Control,
Adjustable from 100 kHz to 550 kHz
D-CAP™ Mode With 100-ns Load Step Response
< 1% Initial Reference Accuracy
Output Voltage Range: 0.75 V to 5.5 V
Wide Input Voltage Range: 1.8 V to 28 V
Selectable Auto-Skip/PWM-Only Operation
Temperature Compensated (4500 ppm/°C)
Low-Side R_DS(on) Overcurrent Sensing
Negative Overcurrent Limit
Integrated Boost Diode
Integrated OVP/UVP and Thermal Shutdown
Powergood Signal
Internal 1.2-ms Voltage Soft-Start
Integrated Output Discharge (Soft-Stop)
APPLICATIONS
- Notebook Computers
- I/O Supplies
- System Power Supplies

All other trademarks are the property of their respective owners

The TPS51117 device is a cost-effective, synchronous buck controller for POL voltage regulation in notebook PC applications. The controller is dedicated for the operation of the Adaptive On-Time D-CAP mode. This mode provides ease-of-use, low external component count, and fast transient response. Auto-skip mode for high efficiency down to the milliampere load range, or PWM-only mode for low-noise operation is selectable.

The current-sensing scheme for positive overcurrent and negative overcurrent protection is loss-less low-side R_DS(on) sensing plus temperature compensation. The device receives a 5-V (4.5 V to 5.5 V) supply from another regulator such as the TPS51120 or TPS51020. The conversion input can be either VBAT or a 5-V rail, ranging from 1.8 V to 28 V, and the output voltage range is from 0.75 V to 5.5 V.

The TPS51117 is available in a 14-pin VQFN or a 14-pin TSSOP package and is specified from –40°C to 85°C.

The TPS51117 device is a cost-effective, synchronous buck controller for POL voltage regulation in notebook PC applications. The controller is dedicated for the operation of the Adaptive On-Time D-CAP mode. This mode provides ease-of-use, low external component count, and fast transient response. Auto-skip mode for high efficiency down to the milliampere load range, or PWM-only mode for low-noise operation is selectable.

The current-sensing scheme for positive overcurrent and negative overcurrent protection is loss-less low-side R_DS(on) sensing plus temperature compensation. The device receives a 5-V (4.5 V to 5.5 V) supply from another regulator such as the TPS51120 or TPS51020. The conversion input can be either VBAT or a 5-V rail, ranging from 1.8 V to 28 V, and the output voltage range is from 0.75 V to 5.5 V.

The TPS51117 is available in a 14-pin VQFN or a 14-pin TSSOP package and is specified from –40°C to 85°C.

filter

Buscar otro/a Controladores CA/CC y CC/CC (FET externo)

Descargar Ver vídeo con transcripción Video

Documentación técnica

star

=Principal documentación para este producto seleccionada por TI

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 2

	Tipo	Título		Fecha
*	Data sheet	TPS51117 Single Synchronous Step-Down Controller datasheet (Rev. C)	PDF \| HTML	15 may 2015
	User guide	TPS51117 Buck Controller Evaluation Module User's Guide (Rev. B)	PDF \| HTML	01 feb 2022

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.