TPS53511

Name: TPS53511
Brand: TI
SKU: TPS53511
Price: 0.751 USD

ACTIVO

Regulador reductor de 1.5 A con MOSFET integrados

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat 4.5-V to 18-V Input, 1.5-A Step-Down Regulator with Integrated Switcher datasheet (Rev. B) (Inglés) PDF | HTML

Se encuentra disponible una versión más nueva de este producto

open-in-new

Comparar alternativas

Funcionalidad similar a la del dispositivo comparado

TPS562211

ACTIVO

Convertidor reductor síncrono de 4.2 V a 18 V, 2 A, con una precisión del 1 %, PG/SS y PFM/PWM forza Higher efficiency with lower external component count in a smaller package.

TPS53511

ACTIVO

Hoja de datos

Haga su pedido ahora

Detalles del producto

Rating

Catalog

Topology

Buck

Iout (max) (A)

1.5

Vin (max) (V)

18

Vin (min) (V)

4.5

Vout (max) (V)

5

Vout (min) (V)

0.75

Features

Enable, Light-load efficiency, Power good, Prebias startup, Synchronous rectification

Control mode

D-CAP2

Switching frequency (min) (kHz)

700

Switching frequency (max) (kHz)

700

Operating temperature range (°C)

-40 to 85

Iq (typ) (µA)

1300

Duty cycle (max) (%)

95

Type

Converter

Rating

Catalog

Topology

Buck

Iout (max) (A)

1.5

Vin (max) (V)

18

Vin (min) (V)

4.5

Vout (max) (V)

5

Vout (min) (V)

0.75

Features

Enable, Light-load efficiency, Power good, Prebias startup, Synchronous rectification

Control mode

D-CAP2

Switching frequency (min) (kHz)

700

Switching frequency (max) (kHz)

700

Operating temperature range (°C)

-40 to 85

Iq (typ) (µA)

1300

Duty cycle (max) (%)

95

Type

Converter

VQFN (RGT)

16

9 mm² 3 x 3

Continuous 1.5-A output current
4.5-V to 18-V supply voltage range
2-V to 18-V conversion voltage range
DCAP2™ mode control enables fast transient response
Low output ripple and support all MLCC output capacitor
Skip mode for light load control
Highly efficient integrated FETs optimized for lower duty cycle applications
High efficiency, less than 10-µA supply current at shutdown
Adjustable soft-start time
Support pre-biased soft start
700-kHz switching frequency
Cycle-by-cycle overcurrent limit
Open-drain power-good indication
Internal bootstrap switch
Small 3-mm × 3-mm, 16-pin QFN (RGT) package

Continuous 1.5-A output current
4.5-V to 18-V supply voltage range
2-V to 18-V conversion voltage range
DCAP2™ mode control enables fast transient response
Low output ripple and support all MLCC output capacitor
Skip mode for light load control
Highly efficient integrated FETs optimized for lower duty cycle applications
High efficiency, less than 10-µA supply current at shutdown
Adjustable soft-start time
Support pre-biased soft start
700-kHz switching frequency
Cycle-by-cycle overcurrent limit
Open-drain power-good indication
Internal bootstrap switch
Small 3-mm × 3-mm, 16-pin QFN (RGT) package

The TPS53511 is an adaptive on-time D-CAP2™ mode synchronous buck converter. The device is suitable for points-of-load (POL) in computing power systems, and provides a cost-effective, low component count, low standby current solution. The main control loop for the TPS53511 uses the D-CAP2™ mode control to provide a fast transient response with no external components. The adaptive on-time control supports seamless operation between PWM mode during heavy load conditions and reduced frequency operation during light-load conditions for high efficiency.

The TPS53511 includes a proprietary circuit that enables the device to adapt to both low equivalent series resistance (ESR) output capacitors, such as POSCAP or SP-CAP, and ultra-low ESR ceramic capacitors. The device operates from 4.5-V to 18-V supply input, and from 2-V to 18-V input power supply voltage. The device features an adjustable slow-start time and a power-good function. It also supports pre-biased soft start. The TPS53511 is available in a 16-pin QFN package, and is designed to operate from –40°C to 85°C.

The TPS53511 is an adaptive on-time D-CAP2™ mode synchronous buck converter. The device is suitable for points-of-load (POL) in computing power systems, and provides a cost-effective, low component count, low standby current solution. The main control loop for the TPS53511 uses the D-CAP2™ mode control to provide a fast transient response with no external components. The adaptive on-time control supports seamless operation between PWM mode during heavy load conditions and reduced frequency operation during light-load conditions for high efficiency.

The TPS53511 includes a proprietary circuit that enables the device to adapt to both low equivalent series resistance (ESR) output capacitors, such as POSCAP or SP-CAP, and ultra-low ESR ceramic capacitors. The device operates from 4.5-V to 18-V supply input, and from 2-V to 18-V input power supply voltage. The device features an adjustable slow-start time and a power-good function. It also supports pre-biased soft start. The TPS53511 is available in a 16-pin QFN package, and is designed to operate from –40°C to 85°C.

filter

Buscar otro/a Convertidores de CA/CC y CC/CC (FET integrado)

Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new

Comparar alternativas

Pin por pin con la misma funcionalidad que el dispositivo comparado

TPS54326

ACTIVO

Convertidor reductor síncrono de 3 A, entrada de 4.5 V a 18 V, con Eco-Mode™ The 3-A TPS54326 in the 4x4mm QFN package is interchangeable with the 1.5-A TPS53511

Funcionalidad similar a la del dispositivo comparado

TPS562203

ACTIVO

Convertidor reductor síncrono de 2 A con entrada de 4.2 V a 17 V en SOT563 con eco-mode This new product has smaller package and simplified design

TPS562242

ACTIVO

Convertidor reductor síncrono de 3 V a 17 V de tensión de entrada, 2 A y 1.4 MHz en SOT563 This product has a smaller package with 1.2MHz switching frequency

Documentación técnica

star

=Principal documentación para este producto seleccionada por TI

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 3

	Tipo	Título		Fecha
*	Data sheet	4.5-V to 18-V Input, 1.5-A Step-Down Regulator with Integrated Switcher datasheet (Rev. B)	PDF \| HTML	17 ago 2021
	Technical article	How to latch off a power converter that has a hiccup fault response	PDF \| HTML	20 dic 2023
	Application note	Unified Ground Connection Recommendation on TPS53K- Integrated FET-Converter Dev		25 ene 2017

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.