Inicio Administración de potencia Controladores CA/CC y CC/CC (FET externo)
Inicio
Administración de potencia
Controladores CA/CC y CC/CC (FET externo)

TPS53689T

ACTIVO

Controlador multifásico reductor de doble canal, D-CAP+™, digital, de 8 fases, con SVID y PMBus VR14

Haga su pedido ahora
Hoja de datos

TPS53689T

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Rating Catalog Topology Multiphase Iout (max) (A) 765 Vin (max) (V) 17 Vin (min) (V) 4.5 Vout (max) (V) 5.5 Vout (min) (V) 0.25 Control mode D-CAP+ Features Adjustable current limit, Dynamic Voltage Scaling, Enable, Frequency synchronization, I2C, Light Load Efficiency, Multiple Outputs, PMBus, Phase Interleaving, Power good, Pre-Bias Start-Up, Remote Sense, SVID, Synchronous Rectification, UVLO adjustable, Voltage Margining Operating temperature range (°C) -40 to 125 Iq (typ) (µA) 50000 Number of phases 8
Rating Catalog Topology Multiphase Iout (max) (A) 765 Vin (max) (V) 17 Vin (min) (V) 4.5 Vout (max) (V) 5.5 Vout (min) (V) 0.25 Control mode D-CAP+ Features Adjustable current limit, Dynamic Voltage Scaling, Enable, Frequency synchronization, I2C, Light Load Efficiency, Multiple Outputs, PMBus, Phase Interleaving, Power good, Pre-Bias Start-Up, Remote Sense, SVID, Synchronous Rectification, UVLO adjustable, Voltage Margining Operating temperature range (°C) -40 to 125 Iq (typ) (µA) 50000 Number of phases 8
WQFN (RSB) 40 25 mm² 5 x 5
  • Input voltage range: 4.5V to 17V
  • Output voltage range: 0.25V to 5.5V
  • Dual output supporting N+M phase configurations (N+M ≤ 8, M ≤ 4)
  • Fully compatible with TI smart power stages
  • Supports voltage- and current-source Imon power stages, with internal 1kΩ resistor
  • Supports dual side power delivery with 12"+ trace length
  • Intel VR14 SVID compliant with PSYS support
  • Backward compatible to VR13.HC/VR13.0 SVID
  • Automatic NVM fault status logging
  • Enhanced D-CAP+ control to provider superior transient performance with excellent dynamic current sharing
  • Dynamic phase shedding with programmable thresholds for optimizing efficiency at light and heavy loads
  • Configurable with non-volatile memory (NVM) for low external component count
  • Individual per-phase IMON calibration, with multi-slope gain calibration to increase system accuracy
  • Diode braking with programmable timeout for reduced transient overshoot
  • Programmable per-phase valley current limit (OCL)
  • PMBus v1.3.1 system interface for telemetry of voltage, current, power, temperature, and fault conditions
  • New soft-shutdown option for overvoltage fault
  • Programmable loop compensation through PMBus
  • 5.00mm × 5.00mm, 40-pin, QFN package
  • Input voltage range: 4.5V to 17V
  • Output voltage range: 0.25V to 5.5V
  • Dual output supporting N+M phase configurations (N+M ≤ 8, M ≤ 4)
  • Fully compatible with TI smart power stages
  • Supports voltage- and current-source Imon power stages, with internal 1kΩ resistor
  • Supports dual side power delivery with 12"+ trace length
  • Intel VR14 SVID compliant with PSYS support
  • Backward compatible to VR13.HC/VR13.0 SVID
  • Automatic NVM fault status logging
  • Enhanced D-CAP+ control to provider superior transient performance with excellent dynamic current sharing
  • Dynamic phase shedding with programmable thresholds for optimizing efficiency at light and heavy loads
  • Configurable with non-volatile memory (NVM) for low external component count
  • Individual per-phase IMON calibration, with multi-slope gain calibration to increase system accuracy
  • Diode braking with programmable timeout for reduced transient overshoot
  • Programmable per-phase valley current limit (OCL)
  • PMBus v1.3.1 system interface for telemetry of voltage, current, power, temperature, and fault conditions
  • New soft-shutdown option for overvoltage fault
  • Programmable loop compensation through PMBus
  • 5.00mm × 5.00mm, 40-pin, QFN package

The TPS53689T is a VR14 SVID compliant step down controller with trans-inductor voltage regulator (TLVR) topology support, two channels, built-in non-volatile memory (NVM), and PMBus interface, and is fully compatible with TI smart power stages. Advanced control features such as the D-CAP+ architecture provide fast transient response, low output capacitance, and good dynamic current sharing. Adjustable control of output voltage slew rate and adaptive voltage positioning are natively supported. In addition, the device supports the PMBus communication interface for reporting the telemetry of voltage, current, power, temperature, and fault conditions to the host system. All programmable parameters can be configured through the PMBus interface and can be stored in NVM as the new default values, to minimize the external component count.

The TPS53689T is a VR14 SVID compliant step down controller with trans-inductor voltage regulator (TLVR) topology support, two channels, built-in non-volatile memory (NVM), and PMBus interface, and is fully compatible with TI smart power stages. Advanced control features such as the D-CAP+ architecture provide fast transient response, low output capacitance, and good dynamic current sharing. Adjustable control of output voltage slew rate and adaptive voltage positioning are natively supported. In addition, the device supports the PMBus communication interface for reporting the telemetry of voltage, current, power, temperature, and fault conditions to the host system. All programmable parameters can be configured through the PMBus interface and can be stored in NVM as the new default values, to minimize the external component count.
filter Buscar otro/a Controladores CA/CC y CC/CC (FET externo)
Descargar Ver vídeo con transcripción Video
Solicitar más información

La hoja de datos completa y otra información están disponibles bajo un acuerdo de confidencialidad (NDA). Solicitar ahora

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 1
Tipo Título Fecha
* Data sheet TPS53689T Dual- channel (N + M ≤ 8 phase) D-CAP+, Step-down, Multiphase Controllers with TLVR support, PMBus and VR14 SVID Interfaces datasheet (Rev. A) PDF | HTML 30 jul 2025

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Software de aplicación y estructura

FUSION_DIGITAL_POWER_DESIGNER — Software de potencia digital

El software de interfaz gráfica de usuario (GUI) Fusion Digital Power™ se utiliza para configurar y supervisar determinados controladores digitales de alimentación y secuenciadores/monitores de estado de Texas Instruments. La aplicación utiliza el protocolo PMBus para comunicarse con el dispositivo (...)
Descargar
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
WQFN (RSB) 40 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos