Inicio Administración de potencia DC/DC switching regulators DC/DC converters

TPS54310

ACTIVO

Convertidor reductor sincrónico 3 A con entrada de 3 V a 6 V

Se encuentra disponible una versión más nueva de este producto

open-in-new Comparar alternativas
Funcionalidad similar a la del dispositivo comparado
TPS62813-Q1 ACTIVO Convertidor reductor de 2.75 V a 6 V y 3 A con FSW fijo y SINCRONIZACIÓN en flancos mojables de 2 mm Smaller solution size and high accuracy.

Detalles del producto

Rating Catalog Topology Buck Iout (max) (A) 3 Vin (max) (V) 6 Vin (min) (V) 3 Vout (max) (V) 3.3 Vout (min) (V) 0.9 Features Enable, Frequency synchronization, Power good, Synchronous Rectification Control mode Voltage mode Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.0062 Duty cycle (max) (%) 87
Rating Catalog Topology Buck Iout (max) (A) 3 Vin (max) (V) 6 Vin (min) (V) 3 Vout (max) (V) 3.3 Vout (min) (V) 0.9 Features Enable, Frequency synchronization, Power good, Synchronous Rectification Control mode Voltage mode Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.0062 Duty cycle (max) (%) 87
HTSSOP (PWP) 20 41.6 mm² 6.5 x 6.4
  • 60-mΩ MOSFET switches for high efficiency at 3-A continuous output source or sink current
  • Adjustable output voltage down to 0.9 V With 1% accuracy
  • Externally compensated for design flexibility
  • Fast transient response
  • Wide PWM frequency: fixed 350 kHz, 550  kHz, or adjustable 280 kHz to 700 kHz
  • Load protected by peak current limit and thermal shutdown
  • Integrated solution reduces board area and total cost
  • 60-mΩ MOSFET switches for high efficiency at 3-A continuous output source or sink current
  • Adjustable output voltage down to 0.9 V With 1% accuracy
  • Externally compensated for design flexibility
  • Fast transient response
  • Wide PWM frequency: fixed 350 kHz, 550  kHz, or adjustable 280 kHz to 700 kHz
  • Load protected by peak current limit and thermal shutdown
  • Integrated solution reduces board area and total cost

As a member of one of TI’s families of dc/dc regulators, the TPS54310 low-input-voltage high- output-current synchronous-buck PWM converter integrates all required active components. Included on the substrate with the listed features are a true, high performance, voltage error amplifier that provides high performance under transient conditions; an undervoltage-lockout circuit to prevent start-up until the input voltage reaches 3 V; an internally and externally set slow-start circuit to limit in-rush currents; and a power good output useful for processor/logic reset, fault signaling, and supply sequencing.

The TPS54310 device is available in a thermally enhanced 20-pin HTSSOP (PWP) PowerPAD™ package, which eliminates bulky heatsinks. TI provides evaluation modules to aid in quickly achieving high- performance power supply designs to meet aggressive equipment development cycles.

As a member of one of TI’s families of dc/dc regulators, the TPS54310 low-input-voltage high- output-current synchronous-buck PWM converter integrates all required active components. Included on the substrate with the listed features are a true, high performance, voltage error amplifier that provides high performance under transient conditions; an undervoltage-lockout circuit to prevent start-up until the input voltage reaches 3 V; an internally and externally set slow-start circuit to limit in-rush currents; and a power good output useful for processor/logic reset, fault signaling, and supply sequencing.

The TPS54310 device is available in a thermally enhanced 20-pin HTSSOP (PWP) PowerPAD™ package, which eliminates bulky heatsinks. TI provides evaluation modules to aid in quickly achieving high- performance power supply designs to meet aggressive equipment development cycles.

Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 4
Tipo Título Fecha
* Data sheet TPS54310 3-V to 6-V Input, 3-A Output Synchronous-Buck PWM Switcher With Integrated FETs datasheet (Rev. F) PDF | HTML 09 abr 2019
Application note Power for V5’s Transceiver using DC/DC Converters with Integrated FETs 04 sep 2007
Application note Using 3.3-V Signals for Spartan-3 Configuration and JTAG Ports (Rev. A) 13 abr 2004
Application note Designing with the TPS54310 Synchronous Buck Regulator 07 dic 2001

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TPS54310EVM — Convertidor CC/CC con entrada de 3-6 V y 3 A con salida ajustable hasta 0.9 V

The TPS54310EVM kit allows the designer to easily evaluate the TPS54310 synchronous buck DC/DC converter with integrated 3A continuous power MOSFETs. The input range is 3-6V and the output voltage is adjustable down to 0.9V (module present to 3.3V). Other voltages are possible by changing a (...)

Guía del usuario: PDF
Modelo de simulación

TPS54310 TINA-TI Average Reference Design

SGLM020.TSC (717 KB) - TINA-TI Reference Design
Modelo de simulación

TPS54310 TINA-TI Average Spice Model

SGLM019.ZIP (8 KB) - TINA-TI Spice Model
Modelo de simulación

TPS54310 TINA-TI Transient Reference Design

SLIM179.TSC (75 KB) - TINA-TI Reference Design
Modelo de simulación

TPS54310 TINA-TI Transient Spice Model

SLIM180.ZIP (35 KB) - TINA-TI Spice Model
Modelo de simulación

TPS54310 Unencrypted PSpice Average Model Package (Rev. A)

SGLM010A.ZIP (361 KB) - PSpice Model
Modelo de simulación

TPS54310 Unencrypted PSpice Transient Model Package (Rev. A)

SLIM148A.ZIP (49 KB) - PSpice Model
Archivo Gerber

Gerber File for TPS54310EVM

SLVC043.ZIP (112 KB)
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
HTSSOP (PWP) 20 Ultra Librarian

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos